GE 19204 User's Manual
Contents
1. GE Model 19204 19218 www jascoproducts com Wired Push Button This button is not recommended for use on systems which exceed 16 volts Included hardware 2 3x20mm screws Installation Push buttons are typically mounted at the same height above the door sill as the door knob or handle between 36 and 44 above the sill Taking out the back cover of the push button 1 Locate the two door chime wires emanating from the existing door chime circuit 2 Test the door chime by touching the two wires together completing the circuit If the door chime does not sound check the chime transformer or chime 3 Turn off power 4 Attach one wire to each of the screw terminals on the back of the button 5 Mount the button in the desired location with two 2 screws provided Install according to applicable local electrical codes 6 Close the back cover RatingS 16 V Maximum Warning Risk of electric shock Turn off power before replacing switch Rick of fire Do not exceed electrical ratings For technical support contact Jasco Products Company at 1 800 654 8483 or www jascoproducts com Made in China is a trademark of General Electric Company and is used under license to Jasco Products Company LLC 311 N W 122nd Street Oklahoma City OK 73114 www jascoproducts com Rev 1 07 19216
Download Pdf Manuals
Related Search