Garmin Monterra Quick Start Manual
Contents
1. 4 2 Select Compass 3 Turn until A points toward the top of the compass and continue moving in that direction to the destination Following Your Track Log While navigating you can navigate back to the beginning of your track log This can be helpful when finding your way back to camp or the trail head 1 Select Track Manager gt Current Track gt View Map gt TracBack The map displays your route with a magenta line start point and end point 2 Navigate using the map or the compass Stopping Navigation From the map or compass select gt Stop Navigation Camera and Photos You can take photos and videos with your device If enabled the geographic location is automatically saved in the photo or video information You can navigate to the location Taking a Photo 1 Select Camera 2 Turn the device horizontally or vertically to change the orientation of the photo 3 If necessary select one or more options to customize the photo e To change shooting options including flash exposure white balance scene or location information select e To zoom in or out use the slider e To change the focus select a part of the image The device focuses on the area inside of the square brackets When the photo is in focus the square brackets turn green 4 Select to take a photo Downloading Geocaches 1 Connect your device to a computer using the USB cable Go to www opencaching com If necessary cr2. Hold to customize shortcuts widgets or wallpaper Hold to drag shortcuts in or out of the dock OO 0099 Touch to view all installed apps Viewing Notifications 1 Swipe down from the top of the screen The list of notifications appears 2 Select an option e To launch the action or app mentioned in the notification select the notification e To dismiss a notification swipe the notification to the right Enabling GPS For more information about GPS go to www garmin com aboutGPS Select Settings gt Location services gt GPS satellites Connecting to a Wireless Network Select Settings gt Wi Fi If necessary select the toggle switch to turn on Wi Fi If necessary select Scan to scan for available networks Select a wireless network If necessary enter the encryption key The device connects to the wireless network The device remembers the network information and connects automatically when you return to this location in the future of ND Updating the Device Software Before you can update the device software you must be connected to a wireless network The device checks for software updates periodically when it is connected to a wireless network A notification appears when a software update is available You can also check for updates manually 1 Select an option e When a software update notification appears swipe down from the top of the screen and select New softw
3. tracks at a variable rate that creates an optimum representation of your tracks select Auto e To record tracks at a specified distance select Distance e To record tracks at a specified time select Time 7 Select Interval 8 Complete an action e f you selected Auto for the Record Method select an option to record tracks more or less often NOTE Using the Most Often interval provides the most track detail but fills up the device memory quicker e If you selected Distance or Time for the Record Method enter a value and select OK Qi Navigating to a Destination 1 Select Where To 2 Select a category 3 Select a destination 4 Select Go The map opens with your route marked with a magenta line 5 Navigate using the map page 4 or compass page 4 Navigating with the Map 1 Begin navigating to a destination page 4 2 Select Map A blue triangle represents your location on the map As you travel the blue triangle moves and leaves a track log trail 3 Complete one or more actions e Drag the map to view different areas Select and to zoom in and out of the map e Select a location on the map represented by a pin and select the information bar at the top of the screen to view information about the selected location Navigating with the Compass When navigating to a destination A points to your destination regardless of the direction you are moving 1 Begin navigating to a destination page
4. 3 3937 49 0 180 6 427646 EE 39 02 36 699699 035 539 3727 47 815 69 555 00800 4412 454 oman 44 9380 662 915 e 35 1214 447 460 34 93 275 44 97 46 7744 52020 Garmin International Inc Garmin the Garmin logo and TracBack are trademarks of 1200 East 151st Street Garmin Ltd or its subsidiaries registered in the USA and Olathe Kansas 66062 USA other countries Monterra is a trademark of Garmin Ltd or its Garmin Europe Ltd subsidiaries These trademarks may not be used without the Liberty House Hounsdown Business Park express permission of Garmin Southampton Hampshire S040 9LR UK The Bluetooth word mark and logos are owned by the Garmin Corporation Bluetooth SIG Inc and any use of such marks by Garmin is No 68 Zhangshu 2nd Road Xizhi Dist under license microSD and the microSDHC logo are New Taipei City 221 Taiwan R O C trademarks of SD 3C LLC Google and other marks are trademarks of Google Inc Other trademarks and trade names are those of their respective owners TRA REGISTERED No mss Je ERO113771 13 ang ANT TA 2013 589 DEALER No eisa DA0061884 11 APPROVED 2013 Garmin Ltd or its subsidiaries
5. A GARMIN Monterra Quick Start Manual september 2013 190 01601 01_0B Printed in Taiwan Introduction See the mportant Safety and Product Information guide in the product box for product warnings and other important information Device Overview Camera Microphone Power key LED flash Volume keys Battery cover D ring Waterproof speaker Headphone port under weather cap Mini USB port under weather cap Q QE S E Battery Information The temperature rating for the device may exceed the usable range of some batteries Alkaline batteries can rupture at high temperatures Do not use a sharp object to remove batteries Contact your local waste disposal department to properly recycle the batteries NOTICE Alkaline batteries lose a significant amount of their capacity as the temperature decreases Therefore use lithium batteries when operating the device in below freezing conditions Installing the Battery Pack This product contains a lithium ion battery To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat store the device out of direct sunlight 1 Turn the D ring counter clockwise and pull up to remove the cover Locate the metal contacts on the end of the lithium ion battery Insert the battery into the compartment contacts first N oN 4 Press the battery into place 5
6. Replace the battery cover and turn the D ring clockwise Charging the Battery Pack This product contains a lithium ion battery To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat store the device out of direct sunlight NOTICE To prevent corrosion thoroughly dry the mini USB port the weather cap and the surrounding area before charging or connecting to a computer Do not attempt to use the device to charge a battery that was not provided by Garmin Attempting to charge a battery that was not provided by Garmin can damage the device and void the warranty Before you can connect the straight connector of the USB cable to your device you may have to remove optional mount accessories NOTE The battery will not charge when outside the temperature range of 32 to 122 F 0 to 50 C NOTE The battery will not charge when outside the temperature range of 32 to 113 F 0 to 45 C You can charge the battery using a standard wall outlet or a USB port on your computer 1 Pull up the weather cap from the mini USB port 2 Plug the small end of the USB cable into the mini USB port 3 Plug the USB end of the cable into the AC adapter or a computer USB port 4 Plug the AC adapter into a standard wall outlet When you connect the device to a power source the device turns on 5 Charge the battery completely Removing the Battery Pack Do not use a sha
7. are update available e To check for an update manually select Settings gt About Monterra gt System updates The device checks for available updates This may take several minutes 2 Select Download and follow the on screen instructions Locking and Unlocking the Touchscreen You can lock the screen to prevent inadvertent screen touches 1 Hold the power key 2 Select Touch Lock to toggle the screen lock on or off Waypoints Waypoints are locations you record and store in the device Creating a Waypoint You can save your current location as a waypoint 1 Select Mark Waypoint 2 If necessary select Edit to change the name or other waypoint data 3 Select Save Tracks A track is a recording of your path The track log contains information about points along the recorded path including time location and elevation for each point Pausing Track Recording 1 Swipe down from the top of the screen The list of notifications appears 2 Select If next to Track Recording On Customizing Your Track Log You can customize how your device displays and records tracks 1 Select Settings gt Tracks 2 Select Record to toggle track logging on or off 3 Select Show on Map to toggle the track log on the map on or off When this feature is enabled a line on the map indicates your track 4 Select Color and select a color for the track log on the map Select Record Method 6 Select an option e To record
8. eate an account Sign in Follow the on screen instructions to find and download geocaches to your device oR GW NY Customizing the Device Adjusting the Backlight Brightness Extensive use of screen backlighting can significantly reduce battery life You can adjust the backlight brightness to maximize the battery life NOTE The backlight brightness may be limited when the battery is low 1 Select gt Settings gt Display gt Brightness 2 Use the slider to adjust the backlight level The device may feel warm when the backlight setting is high Adding a Shortcut or Widget to the Home Screen 1 From the home screen swipe left or right on the screen to select a page 2 Select 3 If necessary swipe left or right to view additional apps and widgets 4 Hold an app or widget and drag it to the desired location on the home screen Changes to the home screen are saved to the selected profile page 4 Profiles Profiles are a collection of settings that optimize your device based on how you are using it For example the settings and views are different when you use the device for hunting than when geocaching When you are using a profile and you change settings such as data fields or units of measurement the changes are saved automatically as part of the profile Selecting a Profile When you change activities you can change the setup of the device by changing the profile 1 Select Settings gt Pro
9. files 2 Select a profile 3 Select Make Current 4 Optionally select the toggle switch to enable profile switching from the notifications This feature is useful if you switch profiles frequently Creating a Custom Profile You can customize your home screen settings and data fields for a particular activity or trip 1 Select amp gt Settings gt Profiles 2 Select F 3 Enter a name and select Done The new profile is saved and becomes the active profile 4 Customize your home screen settings and data fields Getting More Information You can find more information about this product on the Garmin website e Go to www garmin com outdoor e Go to www garmin com learningcenter e Go to http ouy garmin com or contact your Garmin dealer for information about optional accessories and replacement parts Getting the Owner s Manual You can get the latest owner s manual from the web 1 Go to www garmin com support 2 Select Manuals 3 Follow the on screen instructions to select your product Registering Your Device Help us better support you by completing our online registration today e Go to http my garmin com e Keep the original sales receipt or a photocopy in a safe place www garmin com support eect 913 397 8200 0808 238 0000 1 800 800 1020 44 870 850 1242 1 866 429 9296 43 0 820 220 230 E 32 2 672 52 54 45 4810 5050 m e 358 9 6937 9758 331 55 69 33 99 0800 02
10. rp object to remove batteries 1 Turn the D ring counter clockwise and pull up to remove the cover NO 2 Pull up on the side of the battery pack closest to the power button Installing AA Batteries Instead of the battery pack page 2 you can use alkaline NiMH or lithium AA batteries This is useful when you are on the trail and cannot charge the battery pack Use NiMH or lithium batteries for best results NOTE Standard alkaline batteries are not recommended when using the camera feature 1 Turn the D ring counter clockwise and pull up to remove the cover 2 Insert three AA batteries observing polarity 3 3 Replace the battery cover and turn the D ring clockwise Turning On the Device Select Setting Up the Device The first time you turn on the device you must set up basic device settings You can also set up accounts 1 Turn on the device 2 Follow the on screen instructions Using the Touchscreen e Drag or swipe your finger across the screen to pan or scroll the screen e Pinch two fingers together to zoom out e Spread two fingers to zoom in e Make each touchscreen selection a separate action e Select to return to the previous page Select A to return to the home screen e Select to view additional options for the page you are viewing Home Screen Swipe down to view notifications Enter text to start a search Swipe left and right to switch pages
Download Pdf Manuals
Related Search