Emerson GP808 Owner's Manual
Contents
1. automatically It will continue for 1 hour and 59 minutes and then shut off automatically and reset itself for the following day To stop the buzzer alarm sooner press the ALARM RESET button The buzzer stops immediately and the alarm resets itself for the following day To cancel the alarm completely slide the Power switch to the OFF position The AUTO indicator goes off 25 7 2002 16 15 _ GP808_ib072502 p65 10 SNOOZE REPEAT ALARM If you need a few extra minutes sleep when the alarm comes on in the morning press the SNOOZE button The alarm will stop for approximately 9 minutes and then turn on again This operation can be repeated several times if necessary SLEEP TO MUSIC TIMER The sleep to music timer allows you to fall asleep to music for up to 1 hour and 59 minutes and then shuts the radio off automatically The sleep timer can be activated when the Power switch is set to the OFF AUTO or BUZZ positions 1 Depress the SLEEP button to start the sleep timer The display indicates 0 59 and the radio turns On N To adjust the amount of sleep timer operation continue to hold the SLEEP button and depress the MINUTE button The display starts counting down from 59 minutes Release the MINUTE button when the display shows the desired minute To add 1 hour continue to hold the SLEEP button and press the HOUR button once When the2. _ TS PIGIPOWRE AM FM CLOCK RADIO with SURE ALARM BATTERY BACK UP and NIGHT LIGHT OWNER S MANUAL GP808 Visit our web site at www emersonradio com _ WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow TO REDUCE THE The exclamation point within head symbol within equi RISK OF ELECTRIC SHOCK an equilateral triangle is in lateral triangle is intented to DO NOT REMOVE COVER tended to alert the user to alert the user to the presence OR BACK NO USER the presence of important of uninsulated dangerous voltage operating and maintenance within the product s enclosure SERVICEABLE PARTS INSIDE 9 hap servicing instructions in that may be of sufficient REFER SERVICING magnitude to constitute risk QUALIFIED SERVICE the accompany of electric shock to persons PERSONNEL Ing the appliance IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7
3. Use only power source as indicated Use replacement parts as specified by the manufacturer The product may be mounted to a wall only if recommended by the manufacturer Upon completion of any service or repairs to this product ask the service technician to perform safety checks 15 16 17 18 Ga GP808_ib072502 p65 1 25 7 2002 16 15 _ GP808_ib072502 p65 2 Thank you for purchasing this Girlpower AM FM Clock Radio with Sure Alarm Battery Back Up System It has been designed and engineered to provide you with many years of reliable operation with a minimum of care Listen to your favorite AM FM radio stations wake up to the radio or an electronic buzzer alarm sleep to music with the auto shut off timer and use the Snooze Alarm when you need a few more minutes sleep before you can get up and face a new day The Sure Alarm Battery Back Up System not only maintains the time and alarm settings in case of a power failure but it will also wake you up even if the power is Off at the selected alarm time as long as the back up battery has sufficient power Please read this instruction manual completely to make sure that you understand all of the features of your new clock radio and please save this manual for future reference If you experience any problems with the set up or operation of this radio please call the Emerson Radio Corporation Customer Service Hotline toll free
4. Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 14 This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus Do not overload wall outlet
5. at 1 800 898 9020 The serial number of your radio is located on a label on the bottom of the cabinet We suggest that you record the serial number in the space below for future reference Model No GP808 Serial Number 25 7 2002 16 15 _ GP808_ib072502 p65 3 IMPORTANT NOTES e Avoid installing this unit in places Before turning on the power make exposed to direct sunlight or close to certain that the power cord is properly heat radiating appliances such as installed electric heaters on top of other stereo equipment that radiates too much heat places lacking ventilation or dusty areas places subject to constant vibration and or humid or moist areas When moving the clock be sure to first disconnect the power cord and remove cords connected to other equipment Do not attempt to clean this unit with chemical solvents as this might damage the finish Use a clean dry cloth e Operate controls and switches as described in the manual FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to
6. d insert the plug into a polarized AC120V 60Hz outlet Note that this unit has a polarized AC plug with one wide blade and one narrow blade This is a safety feature designed to protect you from electric shock If this plug will not fit into your outlet you may have an outdated non polarized outlet Do not try to defeat this safety feature by using an adapter or filing the wider blade on the plug to make it fit into your outlet Contact a licensed electrician to replace your outdated outlet AC Outlet AC Plug Note Be sure to connect this radio to an outlet that is always live Do not connect this unit to an outlet that is controlled by a wall switch GP808_ib072502 p65 5 25 7 2002 16 15 LOCATION OF CONTROLS AND INDICATORS 1 ALARM Set RESET Button 2 Power Switch BUZZ AUTO ON OFF 3 SLEEP Button CLOCK Set Button 4 NIGHT LIGHT SNOOZE Button 10 MINUTE Button 11 12 13 14 5 NIGHT LIGHT Selector Switch 15 Battery Compartment Bottom of unit 16 17 18 19 20 TUNING Control HOUR Button HI LO OFF Tuning Dial AUTO Alarm On Indicator AM Indicator Clock Display Bulb Holder Bottom of cabinet _ GP808_ib072502 p65 7 OPERATING INSTRUCTIONS SETTING THE CLOCK When the unit is plugged in for the first time the clock will show AM 12 00 and the display will flash The flashin
7. desired amount of sleep time appears on the display release all the buttons The radio will continue to play until the sleep timer counts down to 0 00 and then the radio shuts off automatically A To shut off the radio and cancel the sleep timer before it counts down to 0 00 press the SNOOZE button The radio stops immediately IMPORTANT Remember that the station and volume setting that you select for sleep timer operation are the same settings you will hear the following morning if you have the alarm set for RADIO 25 7 2002 16 15 _ NIGHT LIGHT Slide the NIGHT LIGHT switch to either the LO or HI position to turn on the nightlight Slide to the OFF position to turn the nightlight off BULB REPLACEMENT To change the bulb use a coin to turn the bulb holder clockwise slightly until it pops up from the bottom cabinet Remove the bulb holder and discard the old bulb Place the new bulb in the bulb holder and insert the bulb holder into the cabinet Turn counterclockwise slightly to lock it in place See following illustration Replacement Bulb Information Type No PR12 Rating DC6V 0 5A 11 GP808_ib072502 p65 11 25 7 2002 16 15 _ GP808_ib072502 p65 12 CARE AND MAINTENANCE There are no user serviceable parts inside this radio Please refer all service problems to a qualified service fac
8. g will stop after the clock has been set AM indicator AUTO On indicator 1 Depress the CLOCK button and the HOUR button together to adjust the clock to the correct hour then release the buttons Note Be sure to set the hour correctly for AM or PM If the AM Indicator is the time displayed is AM If the AM indicator is the time displayed is PM 2 Depress the CLOCK button and the MINUTE button together to adjust the clock to the correct minute then release the buttons SETTING THE WAKE UP TIME 1 Depress the ALARM button and the HOUR button together to adjust the clock display to the correct wake up hour then release the buttons Be sure to set the wake up hour correctly for either AM or PM 2 Depress the ALARM button and the MINUTE button together to adjust the clock display to the correct wake up minute then release the buttons 25 7 2002 16 15 LISTENING TO RADIO 1 Set the BAND switch to the desired band AM or FM 2 Set the VOLUME control to a low setting 3 Slide the Power switch to the position 4 Use the TUNING control to select the desired station 5 Adjust the VOLUME control to a comfortable level 6 When you are finished listening slide the Power switch to the OFF position Hints For Better Reception FM The FM antenna is inside the power cord Make sure the power cord is fully extended for best reception AM The AM antenna is inside the radi
9. harge for labor and parts excluding bulbs at an authorized Depot Repair Facility or replace the product in our discretion For repair or replacement pack your unit in a padded box enclose your check or money order payable to Emerson Radio Corp in the amount of 5 00 not required by California residents to cover shipping and handling costs and enclose a copy of your proof of purchase Send your unit to Emerson Radio Corp 1901 Diplomat Drive Farmers Branch TX 75234 This warranty does not cover damage from negligence misuse abuse accident failure to follow operating instructions commercial use rental repairs by an unauthorized facility or products purchased used serviced or damaged outside of the United States THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE AU898I GP808_ib072502 p65 13 25 7 2002 16 15 EMERSON Part No 21 2032 207 01 GP808_ib072502 p65 14 Emerson Printed in China 25 7 2002 16 15
10. ility See the warranty page of this manual for further details If the cabinet becomes dusty wipe the exterior with a soft dust cloth only Never use dusting sprays or polishes on the cabinet If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a soft cloth that has been slightly dampened with a mild soap and water solution Always disconnect the power cord from the AC outlet before cleaning and never allow any liquid to get inside the cabinet Note If there is no battery in the back up battery compartment the Time and Alarm settings will be lost when the power cord is disconnected for cleaning Reset the clock and wake up times after reconnecting the power cord TO FIND THE LOCATION AND PHONE NUMBER FEimerson your NEAREST SERVICE CENTER SERVICE PERMITTED TO PERFORM WARRANTY CALL TOLL FREE 1 800 695 0098 FOR ADDITIONAL SET UP OR OPERATINGASSISTANCE PLEASE CALL 1 800 898 9020 FOR CUSTOMER SERVICE PLEASE WRITE TO Emerson Radio Corp Consumer Affairs Dept 1901 Diplomat Drive Farmers Branch TX 75234 25 7 2002 16 15 _ LIMITED WARRANTY Emerson Radio Corp warrants manufacturing defects in original material including original parts and workmanship under normal use and conditions for a period of ninety 90 days from the date of original purchase in the U S With your dated proof of purchase we will e provide repair service at no c
11. o cabinet If AM reception is unsatisfactory try rotating or repositioning the cabinet until you find the position that provides the best reception for that particular station _ GP808_ib072502 p65 9 WAKE TO RADIO 1 N w gt Depress the ALARM RESET button The display will change from the correct time to wake up time Adjust the wake up time as described on page 7 if necessary Slide the Power switch to the ON position and select the station and the volume level that you want to hear when you wake up Slide the Power switch to the AUTO position The radio will turn off and the AUTO indicator comes on At the selected wake up time the radio will turn On automatically It will play for 1 hour and 59 minutes and then shut off automatically and reset itself for the following day To stop the radio sooner press the ALARM RESET button The radio stops immediately and the alarm resets itself for the following day To cancel the alarm completely slide the Power switch to the OFF position The AUTO indicator goes off WAKE TO BUZZER ALARM 1 N w gt Depress the ALARM button The display will change from the correct time to wake up time Adjust the wake up time as described on page 7 if necessary Slide the Power switch the BUZZ position The AUTO indicator comes on At the selected wake up time an electronic buzzer alarm will turn
12. power cord The FM antenna is built into the power cord so be sure to extend it to its full length for best FM reception BACK UP BATTERY INSTALLATION The Back Up battery compartment is located on the bottom of the radio Open the battery door as shown in the illustration and connect a 9V battery not included to the battery terminals The battery can only be connected one way Push the battery back into the battery compartment and replace the battery door Note Use only a well known brand of Alkaline battery for longest life and best performance In the event of a temporary power interruption the clock display will go off but the back up battery will maintain the time and alarm settings When power is restored the clock display will come on again and the time and alarm settings will be correct POWER FAILURE INDICATION If you do not install a battery or if the battery is exhausted and the power is interrupted the time and alarm settings will be lost When power is restored the display will begin flashing This flashing display is your indication that the clock is incorrect and you must reset both the time and alarm settings 25 7 2002 16 15 _ POWER SOURCE This radio is designed to operate on normal 120V 60Hz AC house current only Operating the radio with any other power supply may cause damage to the unit which is not covered by your warranty Fully extend the AC power cord an
13. radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Re orient or re locate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation 25 7 2002 16 15 _ GP808_ib072502 p65 4 PREPARATION FOR USE UNPACKING AND SET UP e Remove all packing materials from the unit Also remove any descriptive labels from the front or top of the radio Do not remove any labels from the back or bottom of the radio Place the radio on a stable shelf desk nightstand table etc convenient to a 120V 60Hz AC outlet and away from direct sunlight or sources of heat humidity moisture dust or vibration Unwind the AC
Download Pdf Manuals
Related Search