Directed Video DP1020 User's Manual
Contents
1. 1 POWER Press it to turn the power on or off 2 CH Press it to change the channel up or down 3 ON AUTO OFF Car dome lamp switch 4 Lock Button Press it to open the panel 5 AUTO Auto scan the channel 6 FMT Scroll through FM frequencies or FM OFF hold button down to quickly scan through frequencies below the lowest frequency or above the highest frequency is FM OFF 7 SOURCE Scroll through DVD AV inputs and TV tuner 8 Cover 32 2006 Directed Electronics all rights reserved Install the DVD Player to the Dock h AN oe X YA rs o SE gt i E E St 3 ea Lil EI Sel 5 S o 9 a Src SS TA a gt Li Note Be sure to turn the power off before installing the shuttle a Insert the bottom part of the DVD unit into the lower part of the docking station 4 Be sure lock tab 2 is moved to the right before inserting the DVD b Center the DVD player in the docking station Gently push the DVD player into the docking station the two tabs 3 on the docking station will latched with the DVD unit Refer to the right picture above Once the units are docked lock tab 2 can be engaged by pushing it to the left this will prevent the DVD from coming loose c For getting a nice view you can change the DVD angel 02. 2 4 you can choose 2006 Directed Electronics all rights reserved 23 DOCK FOR DVD UNIT This Docking System has been designed exclusively for the shuttle models with built in TV Tuner not functional in all markets AF FM Radio Clock and Alarm You can place it in your home or office 1 2 3 4 5 6 7 8 17 PIN Shuttle Interface Connector Speakers for Shuttle Models Numeric Buttons 1 5 Power Button TUN BAND VOLUME UP DOWN Button also sleep snooze and clock alarm time set DSP switches between clock and active display also selects time setting mode for clock and alarm turns on alarm 9 24 SEL Select Volume Bass Treble Balance modes and adjust with Volume knob 2006 Directed Electronics all rights reserved 10 EQ Selects EQ preset modes Flat Classical Rock Pop or hold down to select 3D sound mode on or off 11 MODE Switch between DVD TV AV1 AV2 Radio Tuner in radio tuner mode use Band switch to select FM1 FM2 FM3 AM 12 AMS search for TV or radio stations and program into presets 13 LCD Display Window 14 IR Remote Sensor 2006 Directed Electronics all rights reserved 25 Back View and Connection 1 Earphone jack 2 AM ANT Connect the AM radio antenna to this jack 3 TV ANT Connect the coaxial cable from an antenna or cable TV system to this jack 4 AV OUT AUDIO VIDEO output interface 5 AV IN AUDIO VI
3. all rights reserved sound 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PIP button Picture in Picture This key is not used Select UP button In case of menu mode this button serves as cursor button to select item ahead SETUP button Display the SETUP menu ENTER button Confirm the Track Chapter selected with the numeric buttons or selected with thecursor buttons on screen display Select RIGHT button or increase In case of menu mode this button serves as cursor button to select item right Select DOWN button In case of menu mode this button serves as cursor button to select item back AUDIO button Changing of the AUDIO soundtrack on multi audio soundtrack DVD disc Changing of the sound mode of the VCD discs PAUSE button Press it for the first time to pause the playback press it again will resume the playback FAST FORWARD button Press to search forward rapidly Press to search reverse rapidly STOP button Press it for the first time to pre stop the unit playback press it again to stop the palyback NEXT button Press to skip to the next track amp press to skip back one track ANGLE button Changing of the view angle on multi angle DVD disc UP display Change the highlight bar on screen display up or down MENU Display the root menu that is stored on the DVD disc Quick press to dis play the screen menu press and hold MENU button to display the IR
4. Overhead Monitor Prior to operating this unit please fully read this instruction manual and retain it for future reference Congratulations on your purchase of the world s finest video entertainment system At Directed we are committed to bringing you the most technologically advanced products available We are pleased that you chose a Directed Mobile Media product Through years of critical testing and hand craftsmanship we have created a wide range of video entertainment products for your viewing pleasure The 10 2 Dockable Portable Video System can provide all the functions of a television as well as the functionality of a DVD player for your viewing pleasure in the car truck or in your RV This system incorporates the use of on screen display menu controls that allow you to configure the system to suit your own personal preferences For your listening flexibility audio can be heard by included infrared wireless headphones or the built in wireless FM transmitter To view other great products from Directed Electronics please visit the Directed Mobile Media page at www directedmobilemedia com WHAT S INCLUDED The following items are included with your purchase e AC DC power adapter e Carry Case e AV Cable e Remote Control e Car adapter e Headrest mounting bag e Owner s Manual Home docking station with 1 AM antenna 2 FM antenna 3 AC to DC power adaptor 4 Remote Control Car Dock with 1 Mounting plate 2 Har
5. and FM on off menu Console DOWN display Change the highlight bar on screen display up or down Numeric 0 9 Numeric buttons 10 Tens digit select button cooperatively used with numeric buttons TV AV selects Tuner or Aux input Shortly press it to select Tuner or Aux input In radio mode press and hold BAND button to change the band FM1 FM2 FM3 AM CH Channel up CH Channel down AUTO auto programming of TV channels In TV mode pressing AUTO button to auto programe TV channels In radio mode press and hold AS PS to enter auto 2006 Directed Electronics all rights reserved 15 25 matic memory storing function DSP channel display GOTO is disc search button cooperatively used with numeric buttons In TV mode shortly press DSP to display the channel information 26 27 28 29 30 31 32 33 34 35 36 37 38 39 16 TV Tuner power A B Power function is not used in this model In DVD mode press and hold A B will allow a passage to be repeated continuously MENU PBC Changing between PBC ON and PBC OFF on the VCD disc SLOW Changing for slow forward reverse playback motion Image wide zoom full normal Changing the image among wide zoom full and normal REPEAT Switch the Repeat mode of discs ZOOM 2 3 4 1 2 1 3 1 4 OFF Allows the picture to be increased in size PROGRAM Allows the track played in the order you programmed BACK Press to skip to the
6. next track amp press to skip back one track F REV Fast Reverse Press to search forward rapidly Press to search reverse rapidly SUBTITLE on off Display the subtitle language of the DVD disc if the disc is created with subtitles Each time the button is pressed the subtitle language will change LEFT Cursor In case of menu mode this button serves as cursor button to select item left TITLE Display the TITLE menu that is stored in DVD disc IR on off Switch the infrared transmitting on or off FM on off Press it to turn FM on off 2006 Directed Electronics all rights reserved BATTERY REPLACEMENT The remote control unit uses 2 AAA batteries Inserting the Batteries 1 2 Open the battery compartment cover Insert the new battery Make sure that the positive and negative terminals of the battery are oriented as indicated Close the cover Using the Remote Control 1 Face the remote control towards the player front face IR mark remote control signal receiver Operation angle About 30 degree in each the direction of the front of the IR mark PRECAUTIONS 1 2 2006 Directed Electronics all rights reserved Properly dispose of used battery Do not misuse battery by shorting the positive and negative terminal or put it into fire Overheating may cause the battery to explode and cause a fire hazard If the remote is not to be used for a long period remove the batter
7. of the DVD unit 2 Press and hold SOURCE button on the remote control 3 Shortly press MODE button on the front panel of the docking station Radio Operation 1 Selecting the frequency band Shortly press BAND button on the docking station panel or press and hold BAND button on the remote control to change the band among FM1 FM2 FM3 AM 2 Automatic memory storing amp program scanning Automatic memory storing Press and hold AS PS button on remote control for about several seconds or press AMS button on the docking station panel Program scanning Press and hold AS PS button on remote control or press AMS button on the docking station panel to scan preset station And it will hold at each station for about 5 seconds 3 Setting memory Press numeric buttons 1 5 on docking station panel or on the remote control to preset stations at radio mode Each band stores up to five preset stations The stations might be FM1 FM2 FM3 and AM The operation is as below Store in Memory Press and hold several sec onds The current listening station will be stored into the number button Retrieve a Preset Station Press any one of the numeric buttons 1 5 on docking station panel to retrieve a station which had been stored in the memory in advance 4 Selecting station During radio mode shortly press TUN buttons on the dock ing station panel to increase decrease the frequency shortly press TUN buttons on the docking station panel
8. 180 by rotating the docking station s panel Pushing the screen forward or pulling it back to get the best viewing angle d Removing the DVD unit from the docking station just push the lock button 2 to the right side to unlock the cover then press the release button 1 and tack out the DVD unit Mode Selection Press SOURCE button on the docking station panel to change the mode TV Operation 1 Auto searching TV channels Press AUTO button on remote control or on the docking station panel to start search channel automatically In the course of searching press CHbutton on the remote 2006 Directed Electronics all rights reserved 33 control or on the docking station panel to stop searching 2 Selecting channel Press CH buttons on remote control or on the docking station panel to choose channel up or down The numeric buttons 0 1 9 allows toselect the corresponding channel directly 3 Screen display Press DSP button on remote control or on docking station panel to display the current status such as TVch If there is no operation for more than five seconds the information on the screen will disappear Other Operation 1 Dome Lamp Switch There are two dome lamps on the docking station you can use dome lamp switch to turn it on or off When the switch is on AUTO position if you open the door of the car the lamp will turn on when the door closed the lamp will turn off 2 FM Transmitter Function Pres
9. CTURE The disc format is not according to the TV set used PAL NTSC BUTTONS DO NOT WORK Turn the player off and on with the power on off button on the front of the player 2006 Directed Electronics all rights reserved 37 SPECIFICATIONS Supply voltage 12V DC 11V 15V test voltage 14 4V negative ground Current consumption Less than 2A Battery charge voltage 12V DC Signal system Compositive video 1 0 0 2Vp p 75 Discs played 1 DVD VIDEO disc 2 Compact disc CD DA CD R CD RW MP3 MP4 3 VIDEO CD Audio output level 10k 2 ch 2 0 0 5Vrms Audio signal output characteristics 1 Frequency response 20 Hz 20 kHz 2 S N ratio 80 dB JIS 3 Wow and Flutter Below measurable limits Note Specifications and design are subject to modification without notice due to improvements in technology This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited 38 2006 Directed Electronics all rights reserved System Laser If DVD is installed Semiconductor laser Signal Formats NTSC PAL Audio Ch
10. DEO input interface 6 DC 12V IN DC 12V input interface 7 Release Button Press this button to release the shuttle unit 8 FM antenna connect the FM radio antenna to this jack 26 2006 Directed Electronics all rights reserved Install the DVD Player to the Dock A 4 8 qe Ed F PE D L J E QR Note Be sure to turn the power off before installing the shuttle a Insert the bottom part of the DVD unit 1 into the lower part of the docking station 2 b Center the DVD player in the docking station refer to the arrowhead instruction There are two holes on the bottom of the DVD unit Gently push the DVD player into the docking station the four tabs 2 4 on the docking station will buckled with the DVD unit c Removing the DVD unit from the docking station just press the Release button refer to the previous page and tack out the DVD unit Open the Docking Station After all connections are completed correctly press power button on the front panel of the docking station to turn it on or off 2006 Directed Electronics all rights reserved 27 Mode Selection There are three method to change the mode among DVD TV AV and RADIO 1 Press and hold MODE button on the front panel
11. E VEHICLE IS IN MOTION SUCH USE MAY DISTRACT THE DRIVER OR INTERFERE WITH THE SAFE OPERATION OF THE VEHICLE AND MAY ALSO VIOLATE STATE LAW DIRECTED ELECTRONICS DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY INCLUDING FATALITIES OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT SHOULD THE LCD PANEL BREAK OR LEAK FLUID AVOID ALL CONTACT WITH THE UNIT IF YOU SHOULD COME IN CONTACT WITH THE LEAKED FLUID WASH THE AFFECTED AREA THOROUGHLY WITH WATER AND SEEK IMMEDIATE MEDICAL ATTENTION M During operation if the unit should over heat or malfunction switch off the unit and see your dealer Do not disassemble the unit as there are no user serviceable parts in this unit and the warranty will be voided M Should there be a need to replace a blown fuse turn off the unit and disconnect all power to the player Use only the correct rating fuse to avoid electrical damage to the unit M Only operate the monitor as described in this guide Attempts to use or modify this monitor contrary to the descriptions in this guide may cause damage and void the warranty M Extremes in temperature can cause abnormal display operation This monitor has an optimal operating temperature range between 32 120 degrees Fahrenheit If the vehicle interior is outside this range do NOT operate the monitor until the temperature is within its operating range M Exposure to moisture or dust can cause harmful damage to the internal ele
12. K button on the front panel If you play a DVD VCD SVCD press again to stop at the next picture step function If you play a CD MP3 Picture CD pressing again is ineffective Rapid Forward Rapid Reverse Press amp during playback Each time the button is pressed the speed of rapid forward reverse changes according to the disc as follows DVD VCD CD MP3 Normal playback X2 X4 X8 X20 18 2006 Directed Electronics all rights reserved Slow Motion Playback For DVD Only Press SLOW button on the remote control during play Each time the button is pressed the speed of slow forward reverse changes according to the disc as follows DVD Normal playback SF1 2 SF1 3 SF1 4 SF1 7 SF1 6 SF1 5 In slow motion state press OK on the front panel or ENTER on the remote control to recover the normal playback Skipping Track Press buttons on the remote control or press and hold on the front panel during playback Press to skip to the next track and press to skip to the previous track Note For some VCD2 0 discs PBC playback control buttons may be unavailable Volume Level Adjustment Press and hold VOL button on the front panel to increase or decrease the volume level Shortly press on the front panel or MUTE button on the remote control will mute the sound shortly press or MUTE again will resume the sound DVD Video Menu Play When playing a DVD disc in the DVD player 1 The disc will be played automatically and s
13. LD e i OWNER S GUIDE VIDEO INSTALLATION GUIDE Dockable Portable Media Player MODEL DP1020 2006 Directed Electronics N92102 02 06 NON TRANSFERABLE LIMITED CONSUMER WARRANTY 3 SAFETY INSTRUCTIONS AND CAUTIONS sesessesesee 4 WELCOME ria e Ste aes tae Sas Sw ee Eer 6 WHATS INCLUDED asociar io Gest eee awe 6 IMPORTANT INFORMATION 2c cece cree creer cere were cere eens 7 When Cleaning the Vello usais ota 7 While Dd anat 7 Wher Parked A nt nie de end 7 Proper US sec nn Ee EE EE dee ee re eee 7 REV ANG Mn ca nn Ne ice nn es le 7 Radio TV Tuner USE strat A S 7 Installato Meesi i EEEE AETA EE E E Ee 7 AAA O O 8 EENEG t Ann ele 8 A Rues era deniers mouse 9 DIS NOTES mes oS IS ES Ce wee Ses ea ds a 10 DVD OPERATION oo vi Se Sas nee MSE SS SES SSS tele Sete di nee 12 REMOTE CONTROL dee pin ton Oe a elas ea ese 14 BATTERY REPLACEMENT 20 20255 A a 17 DVD OPERATION 20732 dsd a oes Seems see 18 SETUP sais os IIA aes SA re ets este dos ewe 22 DOCK FOR DVD UNIT oc 56d nee aia ds 24 BKT FOR DVD UNIT E ee Ried E aid a 32 TROUBLE SHOOTING odia a EE 36 2 2006 Directed Electronics all rights reserved NON TRANSFERABLE LIMITED CONSUMER WARRANTY This product is sold with a LIMITED 90 day manufacturer s warranty Directed Electronics Directed promises to the original purchaser that the product will be free from defects in materials and workmanship under normal us
14. TE THE MOBILE DVD PLAYER CORRECTLY AS PER THE INSTRUCTIONS USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND RADIO INTERFERENCE USE ONLY THE RECOMMENDED ACCESSORIES THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Region Management Information Region Management Information This Mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player this Mobile DVD Player cannot play this disc 2006 Directed Electronics all rights reserved 5 WELCOME Thank you for your purchase of Directed s
15. UM EXTENT ALLOWED BY LAW AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY INCONNECTION WITH THE SALE OF THE PRODUCT DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS LICENSED DEALERS OR INSTALLERS IN NO EVENT WILL DIRECTED BE LIABLE FOR ANY INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING LOSS OF PROFITS BY PURCHASING THIS PRODUCT THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DIRECTED SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY CALIFORNIA Some states do not allow limitation on how long an implied warranty lasts In such states the limitations or exclusions of this Limited Warranty may not apply Some states do not allow the exclusion or limitation of incidental or consequential damages In such states the exclusion or limitation of this Limited Warranty may not apply to you This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state 2006 Directed Electronics all rights reserved 3 SAFETY INSTRUCTIONS AND CAUTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIP MENT TO RAIN OR MOISTURE TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOY ING INTERFERENCE USE ONLY THE INCLUDED HARDWARE THIS MONITOR IS ONLY DESIGNED FOR REAR SEAT PASSENGER VIEWING AND IS NOT INTENDED FOR VIEWING BY THE DRIVER WHILE TH
16. and hold DSP button on the docking station panel will enter the alarm time setting mode Like setting the clock press SEL button to select hour or minute then rotating VOLUME knob to adjust the hour or minute s value To cancel the alarm just press and hold DSP button to open the alarm time then press and hold DSP again to cancel Alarm icon display is a bell just left of and above the AM PM indicator of the home dock LCD display Be sure icon is displayed or alarm will not function The alarm must be set every time you need to use it It will not automatically repeat Note a When alarming press any button except the VOLUME knob to stop alarming b When alarming Press SNOOZE VOLUME button will stop alarming for three minutes After three minutes will alarm will sound again NOTE This will only function once and the alarm time will be moved forward by 3 minutes AUTO TURN ON Can only be set while the home dock is powered off 3 Auto turn on the docking station wake to music can only be set when the docking station is powered off Briefly press DSP button on the home docking station panel to set the desired time to auto turning on the home docking station Be sure you have set the volume level and source selection MODE to the desired selections 2006 Directed Electronics all rights reserved 29 Auto on icon display is a musical note just left of and above the AM PM indicator of the home dock LCD display Be s
17. ar the surface of the disc Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges If a disc with rough edges is used disc may not be clamped correctly and the player will not play the disc Therefore remove the rough edges in advance by using a ballpoint pen or pencil as shown below To remove the rough edges run the side of the pen or pencil around the inside and outside diameters of the disc 10 2006 Directed Electronics all rights reserved Note A disc may become somewhat scratched although not enough to make it unusable depending on the way it is handled and conditions in the usage environment Note that these scratches are not an indication of any problem with the player Label side up Do not touch the underside of the disc Do not bend ke Wipe the disc from center toward the outside edge 11 2006 Directed Electronics all rights reserved DVD OPERATION IA 33 toy in mu 1 Disc Slot 2 ON OFF STOP 3 SETUP MENU 4 left navigation back or previous 5 VOL 6 VOL 7 right navigation forward or next 8 OK 9 PAUSE MODE 10 MUTE EJECT 11 IR Remote Sensor 12 17 Pin Shuttle InterfaceConnector 13 AV IN 14 AV OUT 12 2006 Directed Electronics all rights reserved 15 Earphone Jack 16 DC 12V IN 17 IR transmitters for IR headphones Portable DVD main unit system settings Menu Function Shor
18. aracteristics Frequency Response If DVD is installed Signal to Noise Ratio DVD Video PCM 96kHz DVD Video PCM 48kHz 20 Hz 40 kHz 1dB 20 Hz 20 kHz 1dB CD 90dB 20 Hz 20 kHz 1dB Harmonic Distortion Dynamic Range If DVD is installed Audio RCA jacks Video RCA jack Audio RCA jack Video RCA jack General 0 01 DVD Video CD Line level A V outputs 1 V p p 75 ohms Line level A V inputs Power Requirements Power Consumption 14 4 VDC 3 35 amps 42 6 watts 5A fuse Operating Humidity Dimensions 345 mm x 65 mm x 282 mm 15 25 in x 3 in x 18 75 in length height width length height width Mass 2 3 kg 3 lbs Operating Temperature 0 50 C 32 120 F 10 to 90 NOTE Specifications and design are subject to change without notice NOTE The unit will automatically power off once the ACC is turned off ignition key off Ensure that the RED ACC wire is connected to ACC power 2006 Directed Electronics all rights reserved 39 40 2006 Directed Electronics all rights reserved 2006 Directed Electronics all rights reserved 41 The company behind this system is Directed Electronics Since its inception Directed has had one purpose to provide consumers with the finest vehicle security car stereo products rear seat entertainment and accessories available The recipient of more than 20 patents in the fie
19. cted REP ONE mode 2 Select REP ALL mode to continuously repeat all chapter track on the current disc 3 When the player finish playback the current disc last chapter track it will stop display the elapsed time When selected REPEAT OFF mode REP ONE amp REP ALL disappear at the screen display 4 REPEAT feature does not support VCD2 0 with PBC ON A B A B repeat allows a passage to be repeated continuously Press and hold A B button on the remote control at the start of the required passage then press and hold A B button again at the end of the passage To revert to normal playing press and hold A B button again Multi audio Language Funciton For DVD Shortly press AUDIO on the remote control during playback Each time the button is pressed the audio soundtrack language changes on sequential order 20 2006 Directed Electronics all rights reserved Notes The language number is different according to the disc Some discs only contain one language soundtrack When no different language soundtracks are recorded will be displayed at screen left top corner For VCD CD Press AUDIO on the remote control during playback It is possible to switch the sound between monaural and stereo sound MONO LEFT MONO RIGHT STEREO Title Menu Function For DVD Only If the DVD has multiple titles recorded on the disc It can select preferred title from the title menu to start playback 1 Press TITLE on the remote control
20. ctronics Do not mount near cup holders or in areas where spills may occur M This monitor is designed for use in vehicles with standard 12 volt ground electrical systems E Do not operate for an extended period of time without the engine running or the vehicle s battery voltage may drop to levels precluding engine starting M Do not drop the LCD panel or subject it to direct impact This will damage the panel and or the back light element RW When operating the unit avoid contact with the LCD panel M Prevent metal or foreign objects being locked between the LCD screen and the enclosure M Keep unit away from equipment with strong magnets such as large loudspeakers 4 2006 Directed Electronics all rights reserved M Use the Proper Power Supply This product is designed to operate with a 12 volt DC neg ative ground battery system M Protect the Disc Mechanism MH Avoid inserting any foreign objects into the disc driver of this player Failure to observe this may cause malfunction due to the precise mechanism of this unit WR Use Authorized Service Centers M Do not attempt to disassemble or adjust this precision product Please refer to the Service Center list that is included with this product for service assistance CAUTION MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF VIEWED DIRECTLY BE SURE TO OPERA
21. during playback The title menu is display 2 Press the cursor button shown in screen display select preferred title by the cursor button and confirm by OK button on the DVD unit or ENTER on the remote control Multi Subtitle Language Function For DVD only Press SUB T on the remote control during playback Each time the button is pressed the subtitle language changes in sequential order Notes The language number is different according to the disc Some discs only contain one subtitle language When no different subtitle language are recorded will be displayed at screen left top corner Multi angle Function For DVD only Press ANGLE on the remote control during playback Each time the button is pressed the angle changes in sequential order Notes The angle number is different according to the disc The function only works for discs having scenes recorded at different angles When no different angle is recorded will be displayed at screen left top corner 2006 Directed Electronics all rights reserved 21 In DVD mode when the disc is playing or in stop mode press and hold SETUP on the DVD unit to enter setup menu When the cursor is on the topside use buttons to move between the different pages Press button to move the cursor to the setup page below and then you can use buttons to move between the different setup options Press button to display the choice list for each setup o
22. dware package Mounting trim gasket Diversity TV antenna system BR A Power Harness 5 6 Dome light harness 6 2006 Directed Electronics all rights reserved APORT AT IN T id WHEN CLEANING THE VEHICLE Do not spray this unit with water or cleaning solutions Moisture and the chemicals found in cleaning fluids could damage the consoles finish and interior electronics A soft damp lens cleaning cloth should be used to wipe the screen Do NOT use any type of scouring pad abrasive cleaners or solvents WHILE DRIVING This unit is intended for use in the rear seat area only It is illegal in some jurisdictions to install the unit in a location that would allow the driver to view it while driving WHEN PARKED The screen is easily visible when deployed Always close the screen when parking for an extended period of time to avoid potential theft or extended exposure to direct sunlight PROPER USE Do not touch the screen Do not pull or hang from the fold down monitor door REPAIRS If the monitor stops working for any reason discontinue use immediately and consult with your retailer about any necessary repairs RADIO TV TUNER USE When the unit is used in conjunction with a Radio TV tuner please assure that the receiver is manufactured to receive television broadcast signals that are transmitted via terrestrial radio waves Reception quality will change and vary according to vehicle location and weather conditio
23. e and condition for a period of ninety 90 days after the date of purchase A sales receipt and or warranty registration card is required to provide proof of date of purchase of the Product Product defect occurring within the first 90 days after retail purchase by the end consumer will be repaired or replaced with new or reconditioned part s at Directed s sole election To obtain warranty service the Product must be returned postage pre paid addressed to Directed along with a legible copy of the receipt and the following information Consumer s name telephone number and address authorized dealer purchase location name and address and product description ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE WILL BE DENIED Note This warranty does not cover labor costs for the removal or reinstallation of the Product Product must be returned to the following address ATTN WARRANTY DEPARTMENT Directed Electronics 1 Viper Way Vista CA 92081 This warranty is non transferable and does not apply to any Product that has been modified or used in a manner contrary to its intended purpose and does not cover damage to the Product caused by installation or removal of the Product This warranty is VOID if the product has not been purchased from Directed or an authorized Directed dealer or if the Product has been damaged by accident unreasonable use negligence acts of God neglect improper service or other causes not ar
24. ing station is not on working shortly press DSP button on the dock ing station panel to set the time of auto turning on the docking station When the docking station is on working except alarming press and hold Push SLEEP VOL UME button on the docking station panel to set the time of auto turning off the docking station Note To set the time of auto turning on off the docking station is like to setting the clock Other Operation 1 EQ Shortly press EQ button on docking station panel to to turn on qualization function 30 2006 Directed Electronics all rights reserved and to select desired audio mode among CLAS ROCK POP FLAT Press and hold EQ button to change the 3D mode ON or OFF 2 SEL Press SEL button to select the desired adjustment mode The adjustment mode will change in the following order VOL BAS TRE Rotating the volume knob 11 clockwise or counter clockwise to adjust the desired sound quality 2006 Directed Electronics all rights reserved 31 BKT FOR DVD UNIT This Car Dock for DVD unit Docking System has been designed exclusively for the shuttle models with built in TV Tuner not functional in all markets You can use it to install the DVD unit on a car D Das OW 8
25. is power at the AC or DC outlet Check if the voltage is properly connected to the DVD unit or if the voltage of the battery is too low NO PICTURE Select the correct TV or AV input Check the video connection DISTORTED PICTURE Check the disc for fingerprints and clean with soft cloth wiping from center to edge Sometimes a small amount of picture distortion may appear This is not a malfunc tion COMPLETELY DISTORTED PICTURE The disc format is not according to the TV set used PAL NTSC NO COLOR IN PICTURE The disc format is not according to the TV set used PAL NTSC DISC DOES NOT PLAY Ensure the disc label is upwards Clean the disc Check if the disc is defective by trying another disc NO SOUND Check audio connections If using a HIFI amplifier try another sound source 36 2006 Directed Electronics all rights reserved If there is no sound when using wireless headphone Check if the IR of off is set to ON and make sure the batteries in the headphones are good NO RETURN TO START UP SCREEN WHEN DISC IS REMOVED Press and hold power button to turn off the unit then press it again to turn on the unit THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL Aim the remote control directly at the sensor on the front of the player Avoid all obstacles which may interfere with the signal path Inspect or replace the remote control batteries DISTORTED OR B W PI
26. ising out of defect in materials or construction This warranty does not cover the elimination of externally generated static or noise or the correction of antenna problems or weak television reception damage to tapes video games software camcorders discs speakers accessories electrical systems cosmetic damage or damage due to negligence misuse abuse failure to follow operating instructions accidental spills or customer applied cleaners damage due to environmental causes such as floods airborne fallout chemicals salt hail windstorms lightning or extreme temperatures damage due to accidents road hazards fire theft loss or vandalism damage due to improper connection to equipment of another manufacturer modification of existing equipment use of a faulty tape cartridge or cleaning or Product which has been opened or tampered with for any reason or which has been damaged due to alteration or service performed by anyone other than Directed This warranty is only valid for sale of Product within the United States of America Product sold outside of the United States of America is sold AS IS and shall have NO WARRANTY express or implied THIS LIMITED WARRANTY IS THE ONLY WARRANTY FOR THIS PRODUCT ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY IMPLIED WARRANTY WARRANTY OF MERCHANTABILITY FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIM
27. ld of advanced electronic technology Directed is ISO 9001 registered Quality Directed Electronics products are sold and serviced throughout North America and around the world Call 800 274 0200 for more information about our products and services Directed Electronics is an ISO 9001 registered company Directed is committed to delivering world class quality products and services that excite and delight our customers VPirected ELECTRONICS Directed Electronics Vista CA 92081 www directed com 2006 Directed Electronics All rights reserved N92102 02 06
28. nics all rights reserved FEATURES DP1020 Compatible with PAL DVD Video CD NTSC DVD Video CD and MP3 Rechargeable battery powered DVD with 10 wide screen 10 2 Inch Color TFT Monitor Selectable Aspect Ratio 16 9 4 3 amp Screen Off On Screen Display Headphone Jack Full Function Remote Control IR headphone transmitter FM radio transmitter for audio Car dock CD1020 with TV tuner Dome lights A V interface TV diversity antenna system Ability to charge batteries in DVD unit while docked Home dock HD1020 with TV tuner Radio AM FM tuner Clock Alarm Clock A V interface Speakers and amplifier Battery charging station for DVD when docked 2006 Directed Electronics all rights reserved 9 DISC NOTES Disc formats supported by this player DVD Video CD CD MP3 Handling and Cleaning Dirt dust scratches and warped discs will cause misoperation Do not place stickers or make scratches on discs Do not warp discs A disc should always be kept in its case when not in use to prevent damage to disc Do not place discs in the following places 1 Direct sunlight 2 Dirty dusty and damp areas 3 Near any heat sources 4 On the seats or dashboard Disc Cleaning Use a dry soft cloth to wipe the surface If the disc is quite dirty use a soft cloth slightly moistured with isopropyl rubbing alcohol Never use solvents such as benzine thinner or conventional record cleaners as they may m
29. ns INSTALLATION Avoid installing the monitor at a location where it will be under direct sunlight or a hot air vent The operating temperature of the unit is from 32 120 F 0 50 C Install the unit at a dry location where it is away from condensation Use only the correct size fasteners and cables during installation Failure to do so may cause a mechanical or electrical failure and create a fire hazard The installation should be done by an authorized Directed dealer NOTE If the internal temperature of the vehicle is higher than the normal operating tem perature please allow the vehicle to cool down or warm up if temperature is below normal operating temperature prior to operating the unit 2006 Directed Electronics all rights reserved 7 PICTURE QUALITY The picture quality of this LCD unit depends strictly on its installed location To achieve the best picture quality adjust the brightness control or viewing angle of the unit until the optimum viewing is achieved FCC NOTICE This device complies with Part 15 of FCC rules Operation is subject to the follow ing two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesirable operation Changes or modifications not expressly approved by the party responsible for com pliance could void the user s authority to operate this device 8 2006 Directed Electro
30. ption and then use but tons and ENTER button or OK to change your selection System Setup 1 TV SYSTEM TV SYSTEM setup allows to select the system to fit to the color system of the TV to be connected NTSC Select this system for NTSC TV PAL Select this system for PAL TV AUTO Select NTSC and PAL automatically 2 SCREEN SAVER If there is no operation for some time the DVD player will enable the screen saver mode You can setup the waiting time among 1MIN 5MIN 10MIN 30MIN and OFF 3 TV TYPE Selecting the screen aspect ratio among 4 3PS 4 3LB and 16 9 4 PASSWORD Setup the password of the unit For the first time use the default password 0000 to unlock the unit 5 RATING Setup the parental rating NO ADULT KID SAFE or VIEW ALL 6 DEFAULT To restore the default value 22 2006 Directed Electronics all rights reserved Language Setup 1 OSD LANGUAGE Supporting OSD language ENGLISH CHINESE GERMAN SPANISH FRENCH and POR TUGUESE 2 AUDIO LANG Supporting audio language CHINESE ENGLISH JAPAN FRENCH SPANISH POR TUGUESE LATIN and GERMAN 3 SUBTITLE LANG Supporting subtitle language CHINESE ENGLISH JAPAN FRENCH SPANISH POR TUGUESE GERMAN and OFF 4 MENU LANG Supporting MENU language CHINESE ENGLISH JAPAN FRENCH SPANISH POR TUGUESE GERMAN and LATIN AUDIO SETUP In AUDIO SETUP menu you can adjust the treble and bass there are seven levels b 4 2 0
31. s FMT button on the docking station panel to change the transmit frequency or turn the FM transmitter on or off The transmitting frequency can be selected from 97 5M to 107 9M One step below 97 5 and one step above 107 9 is FM off FM can also be turned off with FM button on the remote control 34 2006 Directed Electronics all rights reserved CAR DOCKING WIRE CONNECT DIAGRAM ANT1 1 ANT2 1 ANT3 gt ANT4 gt O NI VNNALNV OV 18 4PIN be CONNECTOR Na A 8 gt gt gt 12V DOME RED S Su yo y gt A e 12V DOOR DETECT ORANGE 2E 3 2 2 8 DOOR DETECT WHITE oD ae oo D R M ZT im Cc m m o 3gs dd Orc 2 m OCD OG m D e 3 OC e Q A gt Z Ir m S O aoa 2 A E e 2006 Directed Electronics all rights reserved 35 TROUBLE SHOOTING If it appears that your DVD unit is faulty first consult this checklist It may be that something simple has been overlooked Under no circumstances should you try to repair the player yourself as this will invalidate the warranty Only qualified service personnel can remove the cover or service this player NO POWER Check if the on off button on the front of the player is set to on Check if AC or DC power plug of the mains unit is properly connected Check if there
32. tly press SETUP button on the front panel or MENU on remote during DVD AV or TV mode to display the adjustment items on screen 1 Use the up down nav igation buttons on the DVD or remote to select the item and the left right navi gation buttons on the DVD or remote to adjust the settings Screen 1 BRIGHTNESS adjust 0 to 63 preset at 32 CONTRAST adjust 0 to 63 preset at 32 COLOR adjust 0 to 63 preset at 32 TINT adjust 0 to 63 preset at 32 SCREEN select screen size 4 3 or 16 9 preset at 16 9 RESET back to presets Select and hold down the MENU button on the remote to switch to screen 2 Selections and adjustments are made the same as in screen 1 except in FM frequen cy select mode In FM mode pressing the left right navigation buttons once will give you one step down up Holding down the left right navigation button will quickly scan down up the frequencies Screen 2 IR ON OFF 3D sound enhancement ON OFF FM Select frequency for FM transmitter 2006 Directed Electronics all rights reserved 13 REMOTE CONTROL 14 POWER and video SOURCE button Press and hold to turn the unit ON or OFF When the unit is on press SOURCE button to change the mode DISPLAY button Display satistical disc information during playback Ambient light sensor for remote button back lighting MUTE button Press it to mute the surround pressing it again will resume the 2006 Directed Electronics
33. to decrease frequency by one step of channel spacing Hold the button longer for fast tuning TV Operation 1 Auto searching TV channels Press AUTO button on remote control or press and hold AMS button on the docking station panel for several seconds to start search channel automatically In the course of searching press CHbutton on the remote control or TUNon the docking station panel to stop searching 2 Selecting channel Press CH buttons on remote control or TUN buttons on the docking station panel to choose channel up or down The numeric buttons 0 1 9 allows to select 28 2006 Directed Electronics all rights reserved the corresponding channel directly 3 Screen display Press DSP button on remote control or on docking station panel to display the current status such as TVch If there is no operation for more than five seconds the information on the screen will disappear Setting the Time 1 Setting the clock Setting the Clock or Alarm Time Home Dock must be powered on 1 Setting the clock Briefly press DSP button on docking station panel the time display will appear on the home dock LCD display Press SEL button once the hour will flash Press SEL button again the minute will flash you can adjust the hour or minute s value while flashing by rotating the VOLUME knob clockwise or counter clockwise to increase or decrease the value Then press DSP again to confirm the change 2 Setting the alarm time Press
34. top at menu picture 2 Use cursor buttons to move between the highlight bars in the menu 3 Press OK button on the remote control or ENTER button on the front panel to confirm the selected item Mode Selection Press and hold MODE button on the front panel or press SOURCE button on the remote control to change the mode Menu Function Shortly press SETUP button on the front panel during DVD AV TV mode to display the adjustment items on the screen BRIGHTNESS 32 CONTRAST 32 COLOR 32 TINT 31 RESET 2006 Directed Electronics all rights reserved 19 Press buttons on the DVD unit or buttons on the remote control to select among BRIGHTNESS CONTRAST COLOR and TINT For the unit with NTSC system items and etc Press buttons on the DVD unit shortly or press buttons on the remote control to adjust the corresponding item Menu Function Press the MENU button on the remote control during DVD mode will return to the MENU stored in the current disc PBC FUNCTION For VCD Disc While the VCD disc is playing press PBC button on the remote control to change between PBC ON and PBC OFF on the VCD disc Repeat Playback FOR DVD Press REPEAT button on the remote control to select repeat mode as follow CHAPTER REPEAT ON TITLE REPEAT ON REPEAT OFF FOR VCD CD In stop mode press REPEAT button to select repeat mode as follow REP ONE REP ALL REPEAT OFF 1 Continuously repeat at the current chapter track when sele
35. ure icon is displayed If the ALARM bell icon is displayed pressing the DSP button will cycle through the modes but check your auto on time after stepping through the modes to make sure the auto on time did not clear Note To set the time to auto turn on the home docking station is the same as setting the alarm time above see step 2 AUTO TURN OFF SLEEP Can only be set while the home dock is powered on Auto turn off Sleep mode can only be set when the docking station is powered on and working except alarming Press and hold Push SLEEP VOLUME button until 15 MIN appears in the home dock screen Pushing and releasing the VOLUME button will step through 15 30 35 60 90 120 Minutes and OFF When SLEEP is activated the word SLEEP is displayed in the lower left corner of the home dock LCD display 2 Setting the alarm time Press and hold DSP button on the docking station panel will enter the alarm time setting mode Like setting the clock press SEL button to select hour or minute then rotating VOL UME knob to adjust the hour or minute s value To console the alarm just press and hold DSP button to open the alarm time then press and hold DSP again to console Note a When alarming press any button except the VOLUME knob to stop alarming b When alarming Press SNOOZE VOLUME button will stop alarming for two sec onds After two seconds will alarm again 3 Auto turn on off the docking station When the dock
36. y from the remote to prevent damage from battery leakage unm To avoid accidents prevent children from playing with the battery 17 DDR ou TURN THE UNIT ON OFF Turning on the Player After all connections are completed correctly press and hold power button on the front panel or press and hold on the remote control to turn on the power Turning off the Player When the power is on press and hold power button on the front panel or shortly press and hold on the remote control to turn off the power Remote Sensor IR Point the remote handset to the remote sensor IR on the DVD unit Receiving the signal from the remote handset Loading a Disc Insert the disc into the disc slot on the left side of the unit with the printed side facing up the player will play the disc automatically Removing a Disc When the disc stops playing press and hold EJECT button on the front panel to eject the disc BASIC PLAY Stopping Playback Shortly press button on the remote control one time to pre stop the unit playback When OK button on the front panel or ENTER on the remote control is pressed normal playback will continue Press button again will stop the playback and go back to the DVD LOGO Pausing Play Step Play Shortly pressing on the front panel or on the remote control for the first time during playback will stop playback temporarily To return to normal playback press again or press ENTER button on the remote control or O
Download Pdf Manuals
Related Search