Dell PowerConnect 5548p Technical White Paper
Contents
1. query interval Ouerylnterval HostTimeOut RouterTimeOut OueryMaxResponseTime LeaveTimeOut LastMemberOueryCount LastMemberQuerylInterval Interface interface ethernet interface interface id 1 The command syntax was Configuration interface interface range ethernet port range all interface port channel port channel number interface port range list all modified 2 See also description in previous chapter Page 4 CLl Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Comments Implementation ARP arp timeout seconds arp timeout seconds In the revised implementation the command is supported in both Global Configuration Mode and Interface Configuration Mode while previous implementation supported only Global Configuration Mode VLAN vlan vlan id vlan vlan id media 1 In the revised name ethernet name vlan implementation the command name state active stp is also used for assigning a type ieee name to a VLAN 2 Optional parameters were added entering them has no effect VLAN switchport trunk allowed switchport trunk allowed 1 The command syntax was vlan add vlan list remove vlan list vlan all none add vlan list remove vlan list except vlan list modified 2 See also description in previous chapter Page 5 CLl Transition guide for Dell PowerConnec2. RL AEL ELE LEE R EL RL FEL Yan 2 Configuring IP Address on a port which is a member of VLANS I Y FF FL Y FL eee teen FRO 2 Enhanced functionality in Trunk mode 99 rY YR YY AR AR eee cece teat FR FFR FR eat FR FF FR EF FR NR ERYR 3 Enhancement to IGMP Sn00pihd 3 5 4 9ilGieRdY AIR a eenaa GN ROD EO EAL PETTEN ILA ESO EE DAU FF ET 3 Additional ACK Options enw eyda dese hob dildo du Ge dow dyo y ddodwy NG rs dyd diy dl Gow dow dyd 3 Modification in Power Over Ethernet 99 Y YY nett 3 Enhancement to Stack Configuration Y Y Y YY eee ee AR RR FREE a FERF R FFR FF FF FR FR NR NR EEE ES 3 Enhancement to QoS Ingress Rate Eimit eie dieni ONE YN EY n EET vawien obs FER des HWA YR Er SESE ce 3 Updated Commands Operational ModificationS l LY LY renee 4 Updated Commands Command Mode ModificationS Y Y YA YY FR Y eens 6 Updated Commands Syntax ModificationS YY Y LLY Y YAA YRR RAE EAR ELE AFAEL EL ELE ELF ELN Ea 8 SUMMA FT FERRY EN FFRED CEFIN EF i E pte spe enna an E ed ate o E E E E 13 Tables Table 1 Updated Commands with Operational ModificationS YY Y YY eee eee eee 4 Table 2 Updated Commands with Command Mode Modifications cecceceeseeeeeeeeeeeeeeeeeaeens 6 Table 3 Updated Commands with Syntax ModificationS YL cece nenes 8 Page 1 CLl Transition guide for Dell PowerConnect 5500 Series Switches Introduction
3. extended name name ACL mac access list access list mac access list extended name name Address Table bridge aging time seconds mac address table aging time seconds Clock commands clock timezone hours clock timezone zone hours minutes zone offset minutes offset Page 8 CLl Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation Clock commands clock summer time usa eu recurring date zone clock summer time zone recurring usa eu week day month hh mm week day month hh mm offset clock summer time zone date date month year hh mm date month year hh mm offset clock summer time zone date month date year hh mm month date year hh mm offset Ethernet configuration clear counters ethernet interface port channel port channel number clear counters interface id Ethernet configuration port storm control broadcast rate rate storm control broadcast level bps rate IP Addressing renew dhcp ethernet interface number vian vlan id port channel number renew dhcp interface id IP Addressing arp ip_addr hw_addr ethernet interface number vlan vlan id port channel number arp ip address hardware address interface id IP Addressing ip domain name name ip domain name name IP Addressing ipv6 address ipv6 address link local ipv6 address ipv6
4. immediate leave vlan id immediate leave the command was modified from VLAN Interface Configuration Mode command to Global Configuration Mode command that includes the VLAN ID as a parameter Page 6 CLl Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Comments Implementation IGMP ip igmp snooping ip igmp snooping vlan 1 In Dell PowerConnect 5500 Snooping forbidden mrouter ports vlan id forbidden mrouter the command was modified fadd delete ethernet ports interface range list from VLAN Interface interface list port no ip igmp snooping vlan Configuration Mode command channel port channel vlan id forbidden mrouter to Global Configuration Mode number list ports interface range command that includes the list VLAN ID as a parameter 2 The command syntax was modified IGMP ip igmp snooping ip igmp snooping vian 1 In Dell PowerConnect 5500 Snooping multicast tv vlan vlan id vlan id multicast tv ip the command was modified fadd remove ip multicast address count from VLAN Interface multicast address count number Configuration Mode command number no ip igmp snooping vlan to Global Configuration Mode vlan id multicast tv ip command that includes the multicast address count VLAN ID as a parameter number 2 The command syntax was modified IGMP ip igmp snooping querier ip igmp snooping vlan 1 In Dell PowerConnect 5500 S
5. AG In previous products the user could not add a port to a LAG if the port was a member in any VLAN besides the default VLAN On the Dell PowerConnect 5500 the user can add a port to a LAG even if it is a member of one or more VLANs The VLAN configuration on the port becomes inactive until the port is removed from LAG since the Port acquires the VLAN configuration of the LAG The user can view this information via the show interface switchport command Configuring IP Address on a port which is a member of VLANs In previous products the user could configure an IP Address on a port only if the port was not a member of any VLAN besides the default VLAN IP configuration would become active immediately after command execution On the Dell PowerConnect 5500 the user can define an IP Address on a port even if it is a member of one or more VLANs To activate IP Interface on a port the user must apply the CLI command no switchport which enables L3 capabilities on a port The user can view this information via show interface switchport command Page 2 CLl Transition guide for Dell PowerConnect 5500 Series Switches Enhanced functionality in Trunk mode On the Dell PowerConnect 5500 ports set to Trunk mode now carries all VLANs by default that are created and active on the device and an inactive member of VLANs that were not created The port PVID native VLAN can be configured to a VLAN that does not exist on the device
6. CLl Transition Guide for Dell PowerConnect 5500 Series Switches A Dell Technical White Paper www dell com support dell com CLl Transition guide for Dell PowerConnect 5500 Series Switches THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES THE CONTENT IS PROVIDED AS IS WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND O 2011 Dell Inc All rights reserved Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc is strictly forbidden For more information contact Dell Dell the DELL logo the DELL badge and PowerConnect are trademarks of Dell Inc Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products Dell Inc disclaims any proprietary interest in trademarks and trade names other than its own PC5524 PC5524P PC5548 PC5548P Rev A00 March 2011 Page ii CLl Transition guide for Dell PowerConnect 5500 Series Switches Contents INEFOQUEEI OM teast vatesemanrea a A CY NR YN RS CN YR NR NN YR HN NF 2 Changes to the Interface Naming ConventionS Y Y LLY LLY FL L RF AEL netted 2 VLAN EnhancementS aun ge a hana GAA y Rd A Cy A A 2 Shadow VLAN Configuration cus eesin EY DYA DRY fa GREDA res YET SRG NEA sink de DY Y Fyd Two 2 Adding a port which is a VLAN member to a LAG r YL Y LY ALL FALL YL
7. The Dell PowerConnect 5500 Series Systems CLI Transition Guide White Paper outlines the changes in the CLI commands from the PowerConnect 54XX and 35XX software to the 4 x software release on the 5500 Series switches Changes include syntax and functional updates as specified in the following sections Changes to the Interface Naming Conventions On the Dell PowerConnect 5500 the interface naming convention is the industry standard format of interface type gigabitethernet or tengigabitethernet unit ID Slot number and port number The user can also use the short form of the interface type gi or te For example the name of first gigabitethernet port of unit ID 2 is gi2 0 1 or gigabitethernet2 0 1 VLAN Enhancements The configuration of VLANs in this software release is much more flexible than previous releases Shadow VLAN Configuration In previous products the user could configure interface level VLAN commands only if they matched current port s VLAN mode For example if port is in access mode user could not configure commands related to general mode On the Dell PowerConnect 5500 the user can configure any VLAN command even if not related to the current port VLAN mode Configuration of inactive VLAN modes are kept as shadow configuration until the relevant mode is applied The user can view shadow and active configurations via the show interface switchport command Adding a port which is a VLAN member to a L
8. Untagged frames will be classified to the VLAN whose VID is configured as the port s PVID Frames to all other VLANs active on the port will be sent tagged Enhancement to IGMP Snooping IGMP Snooping configuration was modified to an industry standard configuration which includes robustness query interval query max response time last member query count and last member query interval In the Dell PowerConnect 5500 the IGMP Snooping timers are automatically exported from the received queries and the user does not need to configure them manually Additional ACL Options The enhancement to ACLs includes support for time based ACLs and support for logging information on packets dropped due to deny rules On the Dell PowerConnect 5500 the user can configure IPv6 rules in addition to the IPv4 rules and MAC rules Modification in Power Over Ethernet In previous products the power limit was based on the Class Mode of the powered device On the Dell PowerConnect 5500 the user has control of the allocated power per port Enhancement to Stack Configuration On the Dell PowerConnect 5500 configuring the stack unit numbers is more intuitive and the automatic numbering feature for each unit is enabled by default Enhancement to QoS Ingress Rate Limit On the Dell PowerConnect 5500 the ingress rate limit is based on the Policer mechanism which makes it much more accurate than in the previous products and also makes it possible to use in
9. address prefix length link local IP Addressing ipv6 neighbor ipv6 addr hw addr ethernet interface number vlan vlan id port channel number ipv6 neighbor ipv6 addr interface type interface number hw addr IP Addressing tunnel source auto ip address ipv4 address tunnel source auto ipv4 address Page 9 CLl Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation Web server ip http exec timeout minutes ip http timeout policy idle seconds seconds Web server ip http authentication ip http authentication aaa method1 method2 login authentication method1 method2 Web server ip https port ip http secure port Web server ip https server ip http secure server Port channel port channel load balance flayer 2 3 layer 2 layer 3 layer 2 3 4 port channel load balance src dst mac src dst ip src dst mac ip src dst mac ip port address ipv6 address hostname community string traps informs 1 2 udp port port filter filtername timeout seconds retries retries LLDP lldp enable lldp run LLDP lldp enable rx tx both lldp transmit lldp receive LLDP lldp hold multiplier number Ildp holdtime seconds LLDP lldp reinit delay seconds lldp reinit seconds LLDP clear lldp rx ethernet clear lldp table interface id
10. et_count timeout timeout time_out source ip address time_out source ip tos tos address tos tos System mm reload slot stack member Management number System Ha switch current stack member Management EE RR DN number renumber new stack number to new unit number member number 802 1x show dot1x ethernet show dot1x interface interface show dot1x statistics ethernet interface interface id show dot1x statistics interface interface id Address Table show mac address table vlan vlan interface interface id address mac address show mac address table dynamic vlan vlan interface interface id address mac address Address Table show mac address table vlan vlan interface interface id address mac address show mac address table static vlan vlan interface interface id address mac address Ethernet configuration show ports storm control interface show storm control interface id Page 12 CLl Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation System show power inline ethernet Management interface id show power inline interface show power inline power id consumption module consumption ethernet switch number interface id System show copper ports tdr show cable diagnostics tdr Management interface interface interface id h
11. gress rate limit and storm control on a the same port Page 3 CLl Transition guide for Dell PowerConnect 5500 Series Switches Updated Commands Operational Modifications Table 1 shows the list of commands with updated syntax for normal switch operation Table 1 Updated Commands with Operational Modifications Feature Previous Implementation Dell PowerConnect 5500 Comments Implementation ACL deny permit any deny permit ip 1 The command syntax was protocol any source protocol any source modified source wildcard source wildcard any 2 See also description in fany destination destination destination previous chapter destination wildcard wildcard dscp number dscp number ip precedence number precedence number time range time range name Address clear bridge clear mac address table The command syntax was Table clear mac addresses dynamic interface modified The revised ethernet interface interface id command aggregates two port channel port commands in the former channel number implementation IGMP ip igmp snooping host ip igmp robustness 1 See description in previous Snooping time out ip igmp query interval chapter HD MAE samp we A 2 The transformation to the time out response time a An ME new implementation is as ip igmp snooping leave ip igmp last member follows under the interface O TD FOUND VLAN configuration pgp eee ener RouterTimeOut Robustness
12. interface RMON rmon collection history index rmon collection stats index owner name buckets owner name buckets bucket number interval bucket number interval interval interval SNMP no snmp server enable no snmp server SNMP snmp server host ipv4 snmp server host host addr informs traps version 1 2c 3 auth noauth priv community string notification type udp port port filter filtername timeout seconds retries retries Page 10 CLl Transition guide for Dell PowerConnect 5500 Series Switches dsa no user key username Feature Previous Implementation Dell PowerConnect 5500 Implementation SNMP snmp server community snmp server community community ro rw su community view view name ipv4 address ipv6 address ro rw su ipv4 address view view name ipv6 address access list number snmp server community group community group name ipv4 address ipv6 address SNMP snmp server user username snmp server user username groupname remote groupname remote engineid engineid string auth md5 string password auth sha v1 v2c v3 encrypted password auth md5 key auth md5 sha auth md5 des keys auth sha key password sha des keys no snmp server user username no snmp server user remote engineid string username remote engineid string SSH user key username rsa named key key name encryption signature Spanning T
13. nooping enable vlan id guerier the command was modified no ip igmp snooping vlan vlan id querier from VLAN Interface Configuration Mode command to Global Configuration Mode command that includes the VLAN ID as a parameter 2 The command syntax was modified Page 7 CLl Transition guide for Dell PowerConnect 5500 Series Switches Updated Commands Syntax Modifications Table 3 shows the list of commands with updated syntax modifications Table 3 Updated Commands with Syntax Modifications Feature Previous Implementation Dell PowerConnect 5500 Implementation 802 1x dotlx timeout re authperiod dotlx timeout reauth period seconds seconds 802 1x dot 1x re authentication dot1x reauthentication 802 1x dot1x multiple hosts dot1x host mode single host multi host 802 1x dot1x single host violation dot1x violation mode protect discard forward discard forward shutdown shutdown AAA enable password level level enable password level level password encrypted password 0 7 encrypted password AAA username name password username name privilege password level level level password 0 7 encrypted encrypted password AAA aaa accounting login radius aaa accounting login start stop group radius AAA aaa accounting dot1x aaa accounting dot1x default radius start stop group radius ACL ip access list access list ip access list
14. ree spanning tree mode stp rstp mstp spanning tree mode stp rstp mst Spanning Tree spanning tree bpduguard spanning tree bpduguard enable disable no spanning tree bpduguard Spanning Tree clear spanning tree detected protocols ethernet interface port channel port channel number clear spanning tree detected protocols interface interface id Spanning Tree instance instance id add remove vlan vlan range instance instance id vlan vlan range no instance instance id vlan vlan range Syslog logging buffered size number logging buffered buffer size severity level Page 11 CLl Transition guide for Dell PowerConnect 5500 Series Switches Feature Previous Implementation Dell PowerConnect 5500 Implementation Syslog logging ipv4 address ipv6 logging host ipv4 address address hostname port ipv6 address hostname port severity level facility port port severity level facility description text facility facility description text System ping ip address hostname ping ip ipv4 address Management size packet_size count hostname size packet_size packet_count timeout count packet_count time_out timeout time_out System traceroute ip traceroute ip ipv4 addr Management address hostname size hostname size packet_size packet_size tt max ttl tt max ttl count count packet_count pack
15. t 5500 Series Switches Updated Commands Command Mode Modifications Table 2 shows the list of commands with updated syntax for command mode switch operation Table 2 Updated Commands with Command Mode Modifications Feature Previous Implementation Dell PowerConnect 5500 Comments Implementation IGMP ip igmp snooping ip igmp snooping vlan In Dell PowerConnect 5500 Snooping vlan id the command was modified from VLAN Interface Configuration Mode command to Global Configuration Mode command that includes the VLAN ID as a parameter IGMP ip igmp snooping mrouter ip igmp snooping vlan 1 In Dell PowerConnect 5500 Snooping learn pim dvmrp vlan id mrouter learn pim the command was modified dvmrp from VLAN Interface Configuration Mode command to Global Configuration Mode command that includes the VLAN ID as a parameter 2 The command syntax was modified IGMP ip igmp snooping mrouter ip igmp snooping vlan 1 In Dell PowerConnect 5500 Snooping ports add delete vlan id mrouter interface the command was modified ethernet interface list interface range list from VLAN Interface port channel port no ip igmp snooping vlan Configuration Mode command channel number list vlan id mrouter interface to Global Configuration Mode interface range list command that includes the VLAN ID as a parameter 2 The command syntax was modified IGMP ip igmp snooping vian ip igmp snooping vlan In Dell PowerConnect 5500 Snooping vlan id
16. witch stack member Hu show stack unit unit SW SRT EEF AC Management number IGMP Snooping ip igmp snooping forbidden mrouter ports add delete ethernet interface list port channel port channel number list ip igmp snooping vlan vlan id forbidden mrouter ports interface range list no ip igmp snooping vian vlan id forbidden mrouter ports interface range list Summary For more information consult the Dell PowerConnect 5500 CLI Guide available at http support Dell com Page 13
Download Pdf Manuals
Related Search