Home

Clarion VRX756VD User's Manual

image

Contents

1. Playback control PBC This control signal is recorded on a Video CD for version 2 0 and used to control playback Using pre recorded menu screens in the Video CD with PBC you can enjoy playback of software with a simplified dialog function or software with search function You can also enjoy a still picture at high or standard resolution Listening to a CD This unit is a CD TEXT compatible model This unit supports the display of the DISC TITLE TRACK TITLE and ARTIST of the CD TEXT After disc loading the play mode is automatically engaged Note e This unit supports only CD TEXT in English Also some character data may not be reproduced properly on the display Pausing playback 1 Press the P7II button or touch the P7I key during playback Playback pauses 2 To resume playback press the P7II button or touch the P7II key and playback resumes DVD Video Player Operations Skipping a track searching Press the lt d or P gt button during playback Tracks are skipped as many as the times the button is pressed and playback starts e Press the B gt button and playback starts from the beginning of the next track Press the lt d button and playback starts from the beginning of the current track When this button is pressed again within about 2 seconds playback starts from the beginning of the previous track The same operation can be performed by touching the screen to displa
2. The screws with this mark are enclosed in this set The parts and screws with this mark are used to install radio or included in the installation kit Figure 8 Note 1 In some cases the centre panel may Note 2 If a hook on the installation bracket require some modification trimming interferes with the unit bend and flatten it filling etc with a nipper or a similar tool 68 VRX756VD 6 REMOVING THE MAIN UNIT 1 When the rear of the main unit has been pull the main unit out by the hook plate secured with the method shown in Figure 6 Insert both the right and left edges of the unfasten the special screw hook plate Figure 9 oz 2 Remove the outer escutcheon zd 3 Insert the hook plate between the spring and Note Keep the hook plate You cannot remove the the universal mounting bracket fit tab B of main unit without disengaging the hook plate 2 the spring into hole of the hook plate then Universal mounting bracket Instrument panel 2 Hook plate Spring Outer escutcheon Figure 9 7 CAUTIONS ON WIRING 1 Be sure to turn the power off before wiring Note There are various types of fuse holder Do 2 Be particularly careful where you route the E T the battery side touch other metal wires Keep them well away from the engine and ACAUTION OMASE pipe SIE HE Gina amA E tie After the connection fix the lead by a clamp or MISS insulation tape for protection 3 If the fuse should blow
3. DCZ625 Set the CeNET STAND ALONE switch to the CeNET position STAND CeNET ee VRX756VD 73 cu gt SR ss 35 a B 25 E ll Sample System 2 VRX756VD RCA cable sold separately RIGHT LEFT VIDEO JAUDIO IN AUDIO IN IN D Zi gt SR ss 35 a 25 E Glay mma clarion Visu Input LAO 2 vanaj OGA NI Non fader output Front Speakers RCA video cable o included the TV tuner NI AL CeNET cable included the TV tuner RCA cable sold separately TV Tuner iga NR TTX7501z 4 Channel Amplifier o APA4320 0 TIX7504z CeNET cable included the included the RCA cable DVH940 DVH940 sold separately OVEHAC 24 pepnjoui ejqeo 1eqy jeondo eub6iq Center speaker C built in amplifier SRK5 5 1 ch Surround Decoder O Powered sub woofer built in amplifier DVH940 SRV303 A RCA cable Ferrite clamp Included the DVD changer GZ9ZOA 94 pepnjour ejqeo oepi WOU sold separately CeNET cable included the VCZ625 CeNET DVD Changer Set the SLAVE STAND ALONE VCZ625 switch to the SLAVE position STAND SLAVE ALONE Digital optical fiber cable DCA 005 008 sold separately Set the CeNET STAND ALONE switch to the CeN
4. SUB WOOFER LPF This function can be set to the following three settings 50 Hz 80 Hz and 120 Hz 120 Hz is the default value 5 8 VRX756VD OSPEAKER GAIN This function sets speaker output level This function is not available for speakers whose SPEAKER SEL setting is set to OFF 3 1 Touch the SPEAKER GAIN key to show the submenu 3 2 Touch the FRONT L CENTER FRONT RI SURROUND RI SURROUND L or SUB WOOFERI key to set respective item 3 3 Touch the key to make adjustments in the range 10 dB to 10 dB in 1 dB step increments The default value is 0 dB ODELAY This function adjusts the timing of the speakers so that they are synchronized with front speaker output This function is not available for speakers whose SPEAKER SEL setting is set to OFF 3 1 Touch the DELAY key to show the submenu 3 2 Touch the CENTER SP or SURROUND SP key to set respective item CENTER SP Adjustments are made in the range 0 ms to 5 ms The default value is 0 ms SURROUND SP Adjustments are made in the range 0 ms to 15 ms The default value is O ms ODRC This function sets the dynamic range compression This function is not available for speakers whose SPEAKER SEL setting is set to OFF 3 1 Touch the DRC key to show the submenu 3 2 Touch the MAX STD or MIN key to select respective item x The default value is MAX 4 Touch the
5. X naa in 2 2 PRECAUTION S EAA aa aaa ga na a alaa ga daa aaa ag a aa a aaa nak adana ad aa Saka a Ga 3 Bs GONIROLS isse aaa dana aaa aana aa ak ANG G 5 4 NOMENCLATURE Jani aas aana ik aa aaa seen eiae inu tat aa ek aa e ali ai aia a an a a aa acd es na aa aa aa aiad 6 es o 8 6 OUTLINE OF BUTTON AND TOUCHKEY OPERATION eee sere 10 f REMOTE CONTROL 22 aan ian ada pakane i Peu a aaa Uic oe nni Feb usn Er Na A 16 EA Il E PT 19 9 CAUTIONS ON HANDLING wan aaa jaa aaa Waa Na agan aa e nn RE ga Nai a ge a RR aa aa ada tice 20 TU DVB VIDEO STS TEM ina aiaiai aaa aaa aaa NENG naa a aia a aia a aa aaa aja aaa aa ad a aaa Dan aia a na aaa ad 21 11 OPERATIONS esita aas 23 Basie DENG NG MAMM Mm ET 23 Rado DEK cR E TEES 31 DVD Video Player Operations nnnnevennnnunenennnnnennnnnnnnennnnnnennnnnanennnnnnne anna 33 Pod DENDO ee ee je ij 47 VIDOVAC OPE A OINS ia asasine aaa ketaatan aa Sani akan NELA a nagan a kant aaa Sa anaa Na ajeni Lak aaa 49 e pregio mU 50 DVD Changer OperationS 1 visake panni i p eaaa eaaa nana a ende inte acad qan od us Gucci uiuat aidake 52 TY OPE ie SENA NE NATE 53 OTIS FUNC UON ssc seg aa aaa aaa aaa m m i TT 55 5 1 ch Surround Decoder Op
6. TOP function The TOP function resets the DVD player to the first track of the disc 1 Press the BAND button to playback the first track track No 1 iPod Operations This unit can be used to control a connected Apple iPod third generation version 2 2 fourth generation version 3 01 3 02 iPod Mini version 1 2 Notes e iPod other than above mentioned such as upgraded may not play data e The unit will not operate or may operate improperly with unsupported versions e First and second generation iPods cannot be used Notes regarding use of Apple iPod When using an iPod after connecting the iPod to the connector select the iPod mode by either pressing the SOURCE button or by touching the iPod icon on the SOURCE menu e After the iPod has been connected to this unit the iPod s buttons are disabled for operation e When the iPod mode has been selected a special iPod control screen is displayed different from the main menus for other modes e The remote control unit cannot be used to perform scan repeat or random play e This unit can display the SONG title ARTIST name and ALBUM title of tracks recorded on the iPod When no track data is present the title display will remain blank e During VISUAL mode if VISUAL AUX SENS setting is changed the playback volume in the iPod mode will also be changed e The iPod is used with the equalizer function turned OFF Precautions regarding battery co
7. eVISUAL mode No display UE Clock time PUR W EST COAST 2 ZONE indication Icon color indicates ON OFF OFF blue ON green Displays control keys corresponding to play mode Example for radio mode SRCH Input numbers to tune specific broadcast freguencies BAND Switch reception band LIST Display preset memory station list WW D Tune stations e MANU Seek Manual indication e ST Stereo indication e MeB EX MAGNA BASS EX indication e When the 5 1ch surround decoder DVH940 is connected the signal format of the digital input signal for example Dolby D 3 2 LFE is displayed eRadio TV mode USER WEST COAST user title CD mode CD changer mode USER SHINE user title eCD TEXT in CD mode CD changer mode DISC SHINE disc title TRACK Time has come track title ARTIST Time has come artist VRX756VD 9 6 OUTLINE OF BUTTON AND TOUCHKEY OPERATION SYSTEM CHECK MTUNER E DVD HVISUAL IITELEVISION EMD A C MDVD A C M5 1DECODER 3 1 3 1 4 2 4 p 4 99 PUSH POWER KEY Clarion POWER SOURCE NG Engine ON position System check The CeNET format utilized on this unit is provided with a system check function The operation panel s system check menu is A displayed under the following conditions When power is first turned on after initial
8. 1 Press the lt d b gt button or touch the I PPI key during playback The track is skipped and playback starts Current lt q or I location PPI or gt Backward 4 gt Playback direction direction e Press the B gt button and playback starts from the beginning of the next track e Press the IM button and playback starts from the beginning of the current track When this button is pressed again within about 2 seconds playback starts from the beginning of the previous track e The same operation can be performed by touching the screen to display the menu screen then touching the I or P9 key x In the case of some discs furnished with PBC function when PBC is set to ON this operation will cause the menu screen to be displayed VRX756VD 41 DVD Video Player Operations Fast forward and fast backward 1 Press and hold the lt d or B gt button during playback Press and hold the button and the playback speed becomes 5 time faster first and then 20 time faster 3 seconds later Release the button and the normal speed is restored e The same operation can be performed by touching the screen to display the menu screen then touching the I or P key e No audio is reproduced during fast forward and fast rewind operation e The unit may return to the menu screen when the button is pressed Searching with a track number This operation allows searchin
9. NO ONE 17 AND UNDER ADMITTED LEVEL6 R RESTRICTED L did PARENTS STRONGLY CAUTIONED EVELA PG 13 EVEL3 PG L indi PARENTAL GUIDANCE SUGGESTED LEVEL1 G GENERAL AUDIENCES The contents that the parental level restricts varies with the country code 3 Touch the ENT key 4 Touch the RTN key ESC key VRX756VD 35 DVD Video Player Operations Basic Operations Pausing play l ME 1 Press the IB II button to pause play Loading a disc PAUSE appears in the display e nsert a disc into the centre of the insertion slot 2 To resume disc play press the gt II button with the label side facing up The disc plays again automatically after loading Notes A i e Never insert foreign objects into the disc insertion Ej ecti ng a disc l l slot 1 Press the 4 button a disc ejects EJECT e If the disc is not inserted easily there may be appears in the display The play mode then another disc in the mechanism or the unit may switches to Radio require service If a disc is left in the ejected position for 15 e 8 cm single play discs cannot be used seconds the disc is automatically reloaded Auto reload In this case however the play ACAUTION mode will remain set to Radio Note With the screen open a driver may not see the e Jf f dise neis DAH NET disc insertion slot For your safety insert a disc JOH TONE B AISO NNO IONS GHID TGIQAQME UUS with the screen closed
10. 2 Touch the ANGLE key to select ON or OFF x The factory default setting is OFF 3 Touch the RTN key ESC key Setting up the disc menu language 1 Following the steps 1 to 3 in Selecting the DVD SETUP menu touch the MENU LANGUAGE key VRX756VD 33 DVD Video Player Operations 2 Touch the key to select a desired language to set it x The factory default setting is ENGLISH 3 Touch the RTN key ESC key Setting up the audio language 1 Following the steps 1 to 3 in Selecting the DVD SETUP menu touch the AUDIO LANGUAGE key 2 Touch the key to select a desired language to set it x The factory default setting is ENGLISH 3 Touch the RTN key ESC key A NG up the subtitle language Following the steps 1 to 3 in Selecting the DVD SETUP menu touch the SUB TITLE LANG key 2 Touch the key to select a desired language to set it x The factory default setting is ENGLISH 3 Touch the RTN key ESC key Setting up the password for setting up of the parental level 1 Following the steps 1 to 3 in Selecting the DVD SETUP menu touch the PASSWORD password key 2 Touch the ten key 0 to 9 to input a 4 digit password x The factory default setting is 0000 x Input 4356 to return password to 0000 e Input an old password and touch the ENT key e Input a new password and touch the ENT key 3 Touch the
11. ADC All Shuffle 2 When operation display is touched the display changes to show remaining playing time of current track when pressed again the display returns to the normal play time display Selecting tracks by switching menus 1 Touch the iPod main menu s BROWSE key to display the BROWSE menu BROWSE ARTISTS ALBUMS SONGS GENRES COMPOSERS 2 Touch the desired item key to display the corresponding list iPod Operations 3 Touch the desired track name to select e The display contents will differ depending on the item key selected ARTISTS ALBUMS SONGS GENRES COMPOSERS The following is one example If ARTISTS key is touched gt ARTISTS list is displayed 4 Touch desired artist name gt ALBUMS for that artist are displayed 4 Touch desired album name gt SONGS on that album are displayed Then touch the desired SONG title to select When you return to the iPod main menu after selecting a track the BROWSE key icon will turn to orange If you touch the BROWSE key again in this condition the song title list will be displayed directly At a list display menu touching the lt q key will cause the display to go back one menu Touching W key shows next page Touching A key goes back to previous page Touching the ESC key will cause the display to return to the iPod main menu The following characters can be displayed space amp t 557 0
12. RANDOM 2 Touch the touch key of the function you want to play SCAN scan playback This operation scans and plays back all tracks recorded on the disc the first 10 seconds for each REPEAT repeat playback This operation plays back tracks recorded on the CD repeatedly RANDOM random playback This operation plays back all tracks on the disc in no particular order VRX756VD 43 DVD Video Player Operations 3 Touch the RTN key to return to the previous screen USER BLUE E eH ip rs SS eS Sire Ea ma x Use to display current play status and also as the cancel key 4 To cancel play touch the T SCN T RPT or T RDM key Note e The scan playback function can also be performed using the title list screen s T SCN key To cancel play touch the T SCN key once again Displaying CD titles This unit can display title data for CD text CDs 1 Touch the DISC TRACK or ARTIST key to cause the respective display to scroll once Listening to an MP3 This unit is a ID3 Tag compatible model This unit supports the title artist and album dis play of the ID3 Tag versions 1 and 1 1 After disc loading the play mode is automatically engaged What is MP3 MP3 is an audio compression method and classified into audio layer 3 of MPEG standards This audio compression method has penetrated into PC users and become a standard format This MP3 features the original audio d
13. RTN key ESC key or press the ADJ button 5 1 ch Surround Decoder Operations DSF mode PEO mode DSF effect ON OFF P EQ effect ON OFF x The factory default setting is OFF x The factory default setting is OFF 1 Press the ADJ button and touch the 1 Press the ADJ button and touch the AUDIO key AUDIO key 2 Touch the STATUS key 3 Touch the P EQ key to select ON and OFF 4 Each time the P EQ key is touched the on and off statuses are switched alternately 5 Touch the RTN key ESC key or press the ADJ button Note 2 Touch the STATUS key e If the PEO effect is set to OFF the adjustment 3 Touch the DSF key to select ON and made in PEA is not reflected in the music OFF source 4 Each time the DSF key is touched the on and off statuses are switched alternately 5 Touch the RTN key ESC key or press the ADJ button Note e If the DSF effect is set to OFF the adjustment made in DSF is not reflected in the music source oe the DSF type Press the ADJ button and touch the AUDIO key 2 Touch the key for the desirable type to select it 3 Touch the RTN key ESC key or press the ADJ button VRX756VD 59 5 1 ch Surround Decoder Operations Setting and storing PEO Properties 1 Press the ADJ button and touch the AUDIO key 2 Touch the P EQ key to show the PEA adjusting display 3 T
14. WARNING installation E DRIVER IS PROHIBITED BY LAW FROM VIEWING A VIDEO SIGNAL ON ANY IN DASH MONITOR When an external device is connected or WHILE THE VEHICLE IS IN MOTION disconnected When batteries are changed or otherwise when power is disconnected When reset button is pressed In addition to the above conditions when the anana liquid crystal panel is open and the PUSH POWER KEY message is displayed the system check screen can be displayed by pressing the SOURCE button zone MEI WEST COAST MANU ST M BEX mia Ge EI 10 VRX756VD Radio mode screen Next page USER WEST COAST MANU ST MBEK List screen aal FM 1 98 10 MHz Peh 1 GRIND TA WEST COAST gt BA REGNBOGN AS KEY PAD screen ARADIO X SRSWR4 MZ 68100 ch 10 L A 1 4 m D D O D EM ji v E FM1 107 90 MHz Pch2 ISRGHI BAND LAST Notes x1 The operation button is OPEN button in the description of operation per mode 2 External equipment not connected with CeNET is not displayed 3 The operation key is SRCH key in the description of operation per mode MEI WEST COAST MANU ST MBEK an EPA 4 This shows a KEY PAD selection example in the radio mode when 107 90 MHz is selected 5 Touch the RTN key to return to the previous screen 6 Touch the W key to go to the next menu Touch the A key to return to the previous menu 7 Touch the
15. active matrix driving Pixels 336 960 1440 x 234 General Power source voltage 14 4V DC 10 8 to 15 6 V allowable Ground Negative Current consumption 4 0 A 1 W Auto Antenna Rated Current 500 mA less Dimensions of the Main Unit 178 mm Width x 50 mm Height x 165 mm Depth Weight of the Main Unit 2 4 kg Dimensions of the Remote Control Unit 54 mm Width x 28 8 mm Height x 155 mm Depth Weight of the Remote Control Unit 100 g including battery E E LO O AIE E 00 ep 172mm 178 mm 50 mm Notes e Specifications comply with JEITA Standards e Specifications and design are subject to change without notice for further immprovement tt LON VRX 56VD Installation and Wire connection manual E Contents PACKAGE CONTENTS 101010r rr enenenene nenanem neo paupe beu bae GENERAL CAUTIONS riasan ud iudicati audae sedat itn io i CAUTIONS ON INSTALLATION aaa tease tenen teneis INSTALLING THE MAIN UNIT diiit amt hint alamaa REMOVING THE MAIN UNIT eneen CAUTIONS ON WIRING s iii od a ia aeda aitada aasa WIRE CONNECTION sisese tasand panu nada asa da anakan anan ahan aaa ain SAMPLE OIE a ad gen ajina ai aa a anan T BEFORE STARTING 1 This set is exclusively for use in cars with a negative ground 12 V power supply to 2 Read these instructions carefully e 3 Be sure to disconnect the battery terminal before starting This is to prevent short circuits during installation Figure
16. can damage the disc Watching Listening to a disc DVD Video Operations already inserted i 1 Press the SOURCE button to select the Watching a DVD Video After disc loading the play mode is DVD mode Play starts automatically If no disc is loaded in the unit NO DISC appears automatically engaged in the display e Button operation may not be allowed depending on the story of the disc A WARNING After the menu screen is displayed e Videos may be played back with particu For normal DVD Video discs the DVD menu larly loud sound Increase the volume screen appears gradually from the minimum after the After the DVD menu screen is displayed select video images are displayed an item in the following operations and play it e For your safety the driver should not back watch the video or operate the controls while driving Please note that watching and operating the video while driving are prohibited by law in some countries Notes e For your safety the VRX756VD has a safety function which turns off the picture when the car is moving so only the audio can be heard The picture can only be watched when the car is stopped and the parking break is applied e When playing an NTSC format DVD video and video CD no image will be produced at the rear monitor not applicable to Korea market model 36 VRX756VD DVD Video Player Operations Showing the DVD menu 1 Touch the screen to show the menu s
17. e The same operation can be performed by touching the screen to display the menu screen then touching the I or PP key Selecting a folder track on the LIST screen 1 Touch the LIST key during playback Folders tracks are displayed 2 Touch the A or V key to select a folder and touch the folder name The titles will scroll when the selected folder s mark is touched The track selection screen appears VRX756VD 45 DVD Video Player Operations 3 Touch the A or W key to select the track and touch the track name x When the selected track s yu mark is touched the titles will scroll Touch the RTN key to return to the folder select LIST screen 4 Touch the ESC key Playback by selecting a folder and track Direct select mode This operation allows searching using the folder and track numbers recorded on the MP3 disc 1 Touch the SRCH key Each time you touch the SFT key you can switch between T000 for track number input and F000 for folder number input 2 Input the number for the track or folder that you want to play back with 0 to 9 key 3 Touch the ENT key When you select the folder number playback starts from track 1 of the input folder number 4 Touch the ESC key Other various play functions 1 Touch the SUB key TRACK SGAN gt REPEAT RANDOM FOLDER SGAN REPEAT RANDOM 272 2 Touch the touch key of the function
18. moisture forms on the disc DVD CD wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The condensation will disappear naturally allowing normal operation 2 Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip 3 This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit or lubricate the rotating parts 4 TV broadcast reception When receiving the TV broadcasts the strength of the signals changes since the car is moving so in some cases it may not be possible to receive clear pictures e TV signals are strongly linear so reception is affected by buildings mountains and other obstacles e Such external factors such as electric train lines a high voltage lines and signal devices may disturb the picture or cause noise x If the reception is poor switch to a station with good reception INFORMATION FOR USERS CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY VRX756VD Handling Discs Handling e New discs may have some roughness around the edges If such discs are used the player may not work or the sound may skip Use a ball point pen or the like to remove any roughness from the edge of the disc Ball point pen Roughness Never stick labels on the surface of the disc or
19. switches to DVD mode e If SUB zone is set to VISUAL when 2 ZONE is ON connecting an iPod will cause the 2 ZONE function to turn OFF Setting the 2 ZONE function x The factory default setting is OFF 1 Hold the remote control unit s 2 ZONE button depressed about 1 second to turn the 2 ZONE function ON e The function can also be switched by touching and holding the main menu s 2ZONE key about 1 second MANU ST MBEN hn BERE MIETA ERAS AS 2 ZONE indication Icon color indicates ON OFF e OFF blue ON green When 2 ZONE function is turned ON the main unit s buttons operate to control the MAIN zone source while the remote control unit s buttons operate to control the SUB zone source 2 To turn the 2 ZONE function OFF either press the remote control unit s 2 ZONE button or touch the 2ZONE key on the main menu G Source switching when 2 ZONE function is OFF Radio 9 DVD 9 CD changer gt DVD changer 9 TV VISUAL 9 iPod 29 Radio MAIN zone source switching when 2 ZONE function is ON Press the main unit s SOURCE button to switch sources The order of switching is Radio 9 DVD 9 CD changer gt DVD changer 9 TV VISUAL 9 iPod 29 Radio SUB zone source switching when 2 ZONE function is ON Press the remote control unit s SOURCE button to switch sources e When no iPod is connected switching is DVD mode gt VISUAL mode e When an iPod is
20. 1t09 lt gt AtoZ atoz 1 is displayed for the characters other than above mentioned or not Unicode character Selecting Tracks from a Play List 1 Touch the PLAY LIST key at the iPod main menu to display the play list menu 2 Touch a desired play list name on the play list menu to display the corresponding list of tracks 3 Touch the desired track name on the list to select Note e The titles on the list menu do not scroll VISUAL Operations This function is available when a VTR etc is connected to the visual terminal A WARNING For your safety the driver should not watch the VTR etc or operate the controls while driving Please note that watching and op erating the VTR etc while driving are pro hibited by law in some countries Switching to the VISUAL mode Note e For your safety the VRX756VD has a safety function which turns off the picture when the car is moving so only the audio can be heard The picture can only be watched when the car is stopped and the parking break is applied 1 Press the SOURCE buton and select the VISUAL mode Changing the audio input level The visual terminal can be used to change the input audio level The factory default setting is HIGH 1 Touch the screen to display the menu then touch the SUB key 2 Touch the VISUAL AUX SENS key to select the level HIGH 16 25 dB MID 3 75 dB LOW 0 dB 3
21. ESC key to return to the main screen VRX756VD 11 Radio mode screen SOURCE menu SOURCE TUNER DVD VISUAL TELEVISION CD A C 1 c o o D 9 POWER C 22 4 11 DVD mode screen 08 20 CINEMA AUDIO ONLY f 05 a m TO2 C 004 O 08 20 11 05 am CINEMA 11 05 am SUB menu AUDIO DdbyD 5 1ch JAPANESE SRINIS SUB TITLE JAPANESE SETTINGS AUDIO SUB TITLE PETIME CHAPTER ISGAN Notes 8 The SOURCE menu screen displays icons for components connected to the main unit The icons serve as touch keys for selecting play modes 9 Pressing the SOURCE button changes to B the following play modes mENKICNENOINENICEES rm Ni 10 Screen during DVD mode when automobile ZA is moving 11 When displaying images in DVD mode touching the screen surface will cause the menu screen to be displayed 12 When the playback status has been displayed by pressing the P TIME key the display can be canceled by touching the Screen 12 VRX756VD Next page s ADJUST mode menu DVD SETUP menu ADJUST DVD SETUP zAD FTU Em AUUIOS ETME X TV DISPLAY WIDE ANGLE ON MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUB TITLE LANG OFF PASSWORD gt MONITOR DIMMER LEVEL CCD WARNING NTSG PAL PARENTAL LEVEL NO PARENTAL DVD SETUP MONITOR PARENTAL LOCAL MONI ADJ PARENTAL LEVEL DIMMER LEVE
22. Entering more letters or numerals than specified may cause an incorrect display e Folder structure 1 A disc with a folder having more than 8 hierarchical levels will conflict with the ISO9660 and playback will be impossible ONumber of files or folders 1 The maximum allowable number of folders is 255 including root directory the maximum allowable number of files is 512 max 255 per folder This represents the maximum number of tracks that can be played back DVD Video Player Operations 2 Tracks are played in the order that they were recorded onto a disc Tracks might not always be played in the order displayed on the PC e Some noise may occur depending on the type of encoder software used while recording In case of a track recorded at VBR variable bit rate the display for the play time of the track may be slightly different from the actual play time Also the recommended value of VBR ranges from 64 kbps to 320 kbps Depending on the damage conditions of a file it may occur that the file is not played and the next file is played instead Also if the damage is in a severe condition play stops showing the ERROR 3 display After disc selection the play mode is automatically engaged Note e If ID3 Tag information was entered with 2 byte characters it may occur that the characters are not reproduced properly on the display Regarding MP3 folder creation Up to 8 folder levels includ
23. RTN key ESC key When a disc with view limited is played When a disc with view limited is played the input screen reguiring you to input the password may appear When this happens enter the correct password otherwise play does not start 34 VRX756VD Setting up the country code Set up the country number for setting up of the parental level 1 Following the steps 1 to 4 in Selecting the DVD SETUP menu touch the PARENTAL LOCALE key Touch the ten key 0 to 9 to input a 4 digit country code The factory default setting is 8583 U S A E Country code list Region number 3 BRUNEI DARUSSALAM Kingdom of Cambodia INDONESIA KOREA DEMOCRATIC PEOPLE S REPUBLIC OF KOREA REPUBLIC OF LAO PEOPLE S DEMOCRATIC REPUBLIC MALAYSIA MYANMAR PHILIPPINES SINGAPORE THAILAND VIET NAM EAST TIMOR HONG KONG MACAU TAIWAN PROVINCE OF CHINA Region number 4 ANTIGUA AND BARBUDA ARGENTINA AUSTRALIA BAHAMAS BARBADOS BELIZE BOLIVIA BRAZIL CHILE COLOMBIA COSTA RICA CUBA DOMINICA DOMINICAN REPUBLIC ECUADOR EL SALVADOR FIJI GRENADA GUATEMALA GUVANA DVD Video Player Operations HAITI HONDURAS JAMAICA KIRIBATI MARSHALL ISLANDS MEKICO MICRONESIA FEDERATED STATES OF NAURU NEW ZEALAND NICARAGUA PALAU PANAMA PAPUA NEW GUINEA PARAGUAY Setting up the parental level You can change the level of parental lock audio visual restriction This
24. Touch the ESC key to return to previous screen VRX756VD 49 CD Changer Operations Note e When an optional DVD CD changer is connected through the CeNET cable this unit controls all DVD CD changer functions This unit can control a total of 2 changers CD and or DVD CD changer functions Press the SOURCE button and select the CD changer mode to start play If 2 CD changers are connected press the SOURCE button to select the CD changer for play x If NO MAGAZINE appears in the display insert the magazine into the CD changer DISC CHECKING appears in the display while the player loads checks the magazine If NO DISC appears in the display eject the magazine and insert discs into each slot Then reinsert the magazine back into the CD changer ACAUTION CD ROM discs cannot be played in the CD changer dj play Press the D A button or touch the EZ Il key to pause play PAUSE appears in the display 2 To resume play press the P I button or touch the PZII key again Switching the CD TEXT titles This operation is only possible when this unit is connected with a CD TEXT compatible CD changer You can select the CD TEXT titles among the disc titles track titles and artist titles When the panel is closed 1 Press the DISP button to show the SUB display The disc title track title or artist titles user title is displayed 2 Each time you press and hol
25. You can select the desired band to touch the BAND key x Touch and hold the DIRECT key for 2 seconds or longer to store the current station into preset memory 3 Touch the RTN key or the ESC key to return to the previous mode Manual memory G Using the DIRECT button 1 Press the BAND button and select the desired band FM or AM 2 Select the desired station with seek tuning manual tuning or preset tuning 3 Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory G Using the LIST screen 1 Press the BAND button and select the desired band FM or AM 2 Select the desired station with seek tuning manual tuning or preset tuning 3 Touch the screen to display the menu then touch the LIST key 4 Touch and hold one of the DIRECT key for 2 seconds or longer to store the current station into the preset memory Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially If 6 receivable stations cannot be received a previously stored station remains unoverwritten at the memory position 32 VRX756VD 1 Press the BAND button and select the desired band FM or AM 2 Touch the LIST key 3 Touch and hold the AS key for 2 seconds or longer The stations with good reception are stored automatically to the preset channels Preset scan Preset scan receives the stations sto
26. connected only the internal DVD can be played VRX756VD 29 Basic Operations Monitor image and sound with 2 ZONE ON OFF With 2 ZONE function OFF Front monitor lock ON 4 Visual connection OTHERS Front monitor lock OFF 4 Visual connection Visual connection OTHERS NAVI Visual connection NAVI Front image receiver screen Image of device connected to the Visual terminal 3 Displays image of mode selected using the SOURCE button Image of device connected to the Visual terminal Rear monitor image separately sold Audio output Displays image of mode selected using the SOURCE button 2 Sound from mode selected with SOURCE button is output from 4ch speaker NON FADER and AUDIO OUT 6 When 2 ZONE function is ON Front monitor lock ON 54 Front monitor lock OFF 4 Front image receiver screen Visual connection OTHERS Image of device connected to the Visual terminal 3 Visual connection NAVI Image of device connected to the Visual terminal Visual connection Visual connection OTHERS NAVI Displays image of mode selected using the SOURCE button Rear monitor image separately sold Displays image from mode DVD or VISUAL selected with remote control unit s SOURCE button Audio output 1 A device connected to the Visual terminal should be set up as described in the section e Sound from mode select
27. depending on the story of the disc E After the menu screen is displayed For V CD discs eguipped with the PBC Play Back Control function the menu screen appears After the menu screen is displayed select an item in the following operations and play it back Showing the V CD menu for V CD discs with PBC This key does not function on some discs 1 Touch the screen to display the menu screen Touch the MENU key during playback The V CD menu appears The displayed contents may differ depending on the V CD software e Example showing menu display 1 Mercury 2 3 Earth Sol 2 Venus 4 Mars 5 Jupiter 6 Saturn M BEX 2 To select the V CD menu contents touch the KEY key and use either the Cross KEY PAD or the Ten KEY PAD according to the disc contents menu Pausing playback 1 Press the P7II button Playback stops To resume playback press the P7II button and playback resumes from the scene where playback is stopped Slow playback 1 Press the P7II button then press and hold the b gt button While the button is being pressed slow playback continues at the speed 1 3 times the normal playback e Slow playback cannot be performed in the backward direction In addition audio cannot be reproduced during slow playback The same operation can be performed by touching the screen to display the menu screen then touching the IM4 or PP key Skipping a track searching
28. function allows cutting scenes that are unfavorable for children or replacing them automatically with other scenes prepared in advance For example by replacing scenes of radical violence or portrayals of sex with safe scenes you can make a trouble free story as if it were so from the beginning 1 Following the steps 1 to 4 in Selecting the DVD SETUP menu touch the PARENTAL LEVEL key PERU 2 When you touch the A or W key SA Ji NEVIS PASSWORD input screen is displayed SAINT VINCENT AND THE GRENADINES 3 Touch the ten key 0 to 9 to input a 4 digit SAMOA password and touch the ENT key MEA x The factory default setting of the password is SURINAME 0000 TONGA 4 Touch the A or W key to select level 1 to TRINIDAD AND TOBAGO 8 or 0 no parental TUVALU a URUGUAY The factory default setting is 8 VANUATU 5 Touch the RTN key ESC key VENEZUELA ANGUILLA ARUBA VIRGIN ISLANDS BRITISH CAYMAN ISLAND CHRISTMAS ISLAND COCOS KEELING ISLANDS COOK ISLANDS FALKLAND ISLANDS MALVINAS FRENCH GUIANA FRENCH POLYNESIA GUADELOUPE GUAM MARTINIQUE MONTSERRAT NETHERLANDS ANTILLES NEW CALEDONIA NIUE NORFOLK ISLAND NORTHERN MARIANA ISLANDS PITCAIRN TOKELAU TURKS AND CAICOS ISLANDS WALLIS AND FUTUNA ISLANDS The relationship between DVD video category codes and parental level are shown in the table below Use this table when setting the parental level LEVEL7 NC 17
29. mark the surface with a pencil or pen Never play a disc with any cellophane tape or other glue on it or with peeling off marks If you try to play such a disc you may not be able to get it back out of the DVD player or it may damage the DVD player Do not use discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage To remove a disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available disc protection sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the internal mechanism Storage e Do not expose discs to direct sunlight or any heat source e Do not expose discs to excess humidity or dust e Do not expose discs to direct heat from heaters Cleaning e To remove fingermarks and dust use a soft cloth and wipe in a straight line from the center of the disc to the circumference e Do not use any solvents such as commercially available cleaners anti static spray or thinner to clean discs e After using special disc cleaner let the disc dry off well before playing it On Discs e Exercise a good precaution when loading a disc with the panel open e Never turn off the power and remove the unit from the car with a disc loaded ACAUTION With the screen open a driver may not see the disc insertion slot For your safet
30. not a failure but a phenomenon peculiar to a liquid crystal panel The liquid crystal panel is produced according to technology with very high precision Note that though there are effective pixels of 99 99 or more pixel missing or normally lit pixels account for 0 01 13 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem EEE ERROR 2 A CDis caught inside the CD deck andis This is a failure of CD deck s mechanism not ejected and consult your store of purchase ERROR 3 A CD cannot be played due to scratches Replace with a non scratched etc non warped disc ERROR 6 A CD is loaded upside down inside the CD Eject the disc then reload it properly deck and does not play DVD PLAYER DISC ERROR A PAL format disc has been loaded Remove the disc and replace with an Only on Korea market model NTSC format disc ERROR 2 A CD inside the CD changer is not loaded This is a failure of CD changer s mechanism and consult your store of purchase ERROR 3 A CD inside the CD changer cannot be Replace with a non scratched non played due to scratches etc warped disc ERROR 6 A CD inside the CD changer cannot be Eject the disc then reload it properly played because it is loaded upside down For the DVD changer refer to the Owner s Manual provided with the DVD changer If an error display other than the ones described above appear
31. on the remote control unit Touch the DIRECT key 1 to 6 in the display or press the numeric button for the disc number 1 to 6 on the remote control unit to select the desired disc Switching to a next disc Disc Up function The disc up function plays from the first track track No 1 of the next disc Press the BAND button Each time you press the BAND button the disc changes to the next disc x When the remote control unit supplied with the DVD changer VCZ625 is used to operate this component some operation buttons are not supported TV Operations TV functions When an optional TV tuner is connected through the CeNET cable this unit controls all TV tuner functions To watch TV requires a TV tuner A WARNING For your safety the driver should not watch the TV or operate the controls while driving Please note that watching and operating the TV while driving are prohibited by law in some countries Watching TV Note e For your safety the VRX756VD has a safety function which turns off the picture when the car is moving so only the audio can be heard The picture can only be watched when the car is stopped and the parking break is applied 1 Press the SOURCE button and select the TV mode 2 Press the BAND button to select the desired TV band TV1 or TV2 Each time the button is pressed the input selection toggles between TV1 and TV2 3 Press the B gt or lt 4 button to t
32. panel calibration function 4 button e Use this button to eject a disc VRX756VD 5 DISPLAY The Color LCD Display and the Information Panel on the main unit show the following displays providing information about the mode and functions operated Information Panel Operation status indication The frequency play time clock etc are displayed e o o z gt MANU f j ZD ang RASSE Basan QIILRAag ILE Gana Nanang Basa DICALL gt SCNRPTRDMO ats MET MESES Uus AY OEY iaa Manual indication Stereo indication E MAGNA BASS EX indication ALL ALL indication SCN Scan indication RPT Repeat indication RDM Random indication AN 2 ZONE indication Preset channel indication Disc number indication The disc numbers corresponding to the discs in the DVD or CD changer light 8 VRX756VD Color LCD Display Mode name eRadio mode FM1 98 10MHz Pch 1 band frequency preset No eDVD changer mode D2 T02 C002 01 08 20 disc No title No chapter No playback time eDVD video mode TO1 C003 00 08 20 title No chapter No playback time eVideo CD mode T01 00 01 18 track No playback time eMP 3 mode F001 T001 00 04 07 folderNo track No playback time eCD mode T02 04 07 track No playback time CD changer mode D2 T02 00 45 disc No track No playback time TV mode TV1 28CH Pch 1 band channel preset No
33. rear seat 70 VRX756VD Yellow Caf l 12V main power IG Ground Rear right Rear right O Black Purple Purple Black Grass green Parking brake Glay Whit Front left White Black Front left Green Rear left Green Black Rear left O Blue White Amplifier turn on lead Orange White mE Illumination 12V accessory HD Phone mute 1 Brawn JO Auto antenna VRX756VD 71 E Connecting the Accessories e Connection to the external amplifier The external amplifier can be connected unless the 5 1ch Surround Decoder is connected For detailed information refer to the instruction manual of the 5 1ch Surround Decoder Connection to the CCD camera for vehicle The CCD camera for vehicle can be connected to CCD terminal on the tuner amp unit For detailed information refer to the instruction sheet or manual for the CCD camera Notes e A power supply box sold separately is required for connection of the main unit and the CCD camera e The power supply box for camera CAA147 cannot be used Please use the CAA188 instead e If the specified lead of the cellular phone is connected to the phone mute lead of the source unit the audio mute is available when the cellular telephone is used e TV Tunner When the TV TUNER is to be connected connect the CeNET connector and RCA PIN yellow For detailed information refer to the i
34. the brightness and tone of color Notes e This function is not available when the display is stored e The HUE setting can be adjusted only when the NTSC mode is selected e Switch to the VISUAL DVD player DVD video or video CD DVD changer TV mode you see 1 Press the ADJ button to switch to the ADJUST MODE menu 2 Touch the MONITOR key 3 Touch the MONI ADJ key to display BRIGHT HUE and COLOR key Touch the BRIGHT HUE and COLOR key to adjust BRIGHT HUE and COLOR 6 BRIGHT Adjust the brightness of the display HUE Adjust the tone of color red is emphasized or green is emphasized e This operation is available only when the car is stopped and the parking brake is applied COLOR Adjust the color saturation e This operation is available only when the car is stopped and the parking brake is applied 4 Operate the touch key to adjust a level 0 BRIGHT gt Press to make image brighter lt q Press to make image dimmer HUE gt Press to increase green lt q Press to increase red COLOR gt Press to increase color depth lt q Press to decrease color depth 5 Touch the RTN key ESC key or press the ADJ button Adjusting the dimmer level Use to adjust panel brightness when car lights are ON OFF 6 The factory default When the car light is off Brightest setting 58 steps When the car light is on Med
35. the front panel f the front panel does not open fully gently open it with your hand A CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP Attaching the DCP T 2 Insert the right side of the DCP into the main unit Insert the left side of the DCP into the main unit ACAUTION The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks If the front panel is kept open the DCP may drop due to vibration of the car This results in damage to the DCP So close the front panel or remove the DCP to store into the case The connector connecting the source unit and the DCP is an extremely important part Be careful not to damage it by pressing on it with fingernails screwdrivers etc Remote control unit cannot be used when front panel is open Note If the DCP is dirty wipe off the dirt with a soft dry cloth only VRX756VD 1 9 ce o o D 9 CAUTIONS ON HANDLING Liquid crystal panel Generalities For a longer service life be sure to read the following cautions Be sure to store the liquid crystal panel inside the main unit when parking the car outdoors for long period of time The liquid crystal panel will operate properly in a temperature range of 0 to 60 C Don t allow any liquids on the set from drinks umbrellas etc Doing so may damage the internal circuitry Do not d
36. water to a soft cloth wipe off the dirt gently then wipe again with a dry cloth Do not use benzene thinner car cleaner etc as these substances may damage the cabinet or cause the paint to peel Also leaving rubber or plastic products in contact with the cabinet for long periods of time may cause stains VRX756VD Cleaning the liquid crystal panel The liquid crystal panel tends to collect dust so wipe it off occasionally with a soft cloth The surface is easily scratched so do not rub it with hard objects 10 DVD VIDEO SYSTEM DVD video is a high guality digital video source that provides crisp and clear images One 12 cm disc contains either one film or four hours of music DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video Notes e The functions described in the section Features for example the recorded language subtitles angles etc differ with the DVD video disc Refer to the instructions provided with the DVD video e Some disc functions may operate differently than described in this manual Multi sound function DVD video can store up to 8 languages for one film select the language of your preference e The languages stored on the disc are indicated by the icon shown below 22 Multi angle function A DVD video that is filmed from multiple angles allows you to select the angle of choice e Th
37. you want to play TRACK SCAN track scan playback This operation scans and plays back all tracks recorded on the disc the first 10 seconds for each FOLDER SCAN folder scan playback This operation plays back the first tracks of all folder on the MP3 disc the first 10 seconds for each 46 VRX756VD TRACK REPEAT track repeat playback This operation plays back the tracks currently being playback repeatedly FOLDER REPEAT folder repeat playback This operation plays back tracks in an MP3 folder repeatedly TRACK RANDOM track random playback This operation plays the tracks in the folder in a random order FOLDER RANDOM folder random playback This operation plays back tracks recorded on the disc in no particular order 3 Touch the RTN key return to the previous screen 4 FILES AZZ F 002 T 004 O 08 20 11 05 am FOLWOERD OM IN O MP 3 e ALBUMM INT JAMS ARHSTCASIOPEA TLE DOMINO LINE MERAH Pie Ge Ge Gee MEDE Gt ika x Use to display current play status and also as the cancel key 4 To cancel play touch the T SCN F SCN IT RPT F RPT T RDM or F RDM key Notes e The scan playback function can also be performed using the title list screen s T SCN key To cancel play press the T SCN key once again e The folder playback function can also be performed using the title list screen s F SCN key To cancel play press the F SCN key once again
38. 1 om Or a kaa Car battery Figure 1 2 PACKAGE CONTENTS CD Main unit 2 Manuals Owner s manual 8 Installation manual Warranty card 3 Power supply lead 4 Bag for accessories No 1 Flat head screw M5 x 8 Sems hexagonal bolt M5x 8 Electro tap Machine screw M4x 3 sssse 5 Bag for accessories No 2 Hook plate erant eimillestki Cord clamp Rubber cap Special screw 6 Universal mounting bracket 7 Remote control unit Battery for remote control unit 9 Outer Escutcheon DCP Case VRX756VD BEFORE STAR TINGI sa aa a a aa 65 23 gt SR ss 35 a 2 25 E 9 GENERAL CAUTIONS 1 Do not open the case There are no user serviceable parts inside If you drop anything into the unit during installation consult your dealer or an authorized CLARION service centre 2 Use a soft dry cloth to clean the case Never use a rough cloth thinner benzine or alcohol etc For tough dirt apply a little cold or warm water to a soft cloth and wipe off the dirt gently 4 CAUTIONS ON INSTALLATION 1 Prepare all articles necessary for installing the main unit before starting 2 This model is used with the liquid crystal panel slid forwards shell loading system On some types of cars the liquid crystal panel may touch the dashboard or shift lever in which case it cannot be installed Check that
39. Disabled when 2 ZONE is ON and when liquid crystal panel is open SET UP button Press to display the menu for setting audio features during DVD video playback Press to show the DVD SETUP menu f you want to select a menu after the SETUP menu is displayed touch the operation keys on the menu screen DVD TITLE button e Press to display the title screen on DVD video discs Some discs do not display the title screen A V gt buttons e Press to select menus and other items during DVD video MP 3 playback ENT button e Press to confirm numerics entered in the KEY PAD operation screen lt 4 gt gt buttons e Press to select the next higher or lower chapter number in DVD video mode Press to select the next higher or lower track numbers in CD MP 3 mode or video CD mode with the PBC function turned off e Hold down to perform fast forward and fast backward VRX756VD 17 Functions of Remote Control Unit Buttons SCAN button e Press to perform chapter scans in DVD video mode and track scans in CD mode Press to perform track scan and hold down to perform folder in MP 3 mode RPT button e Press to perform chapter repeat in DVD video mode and track repeat in CD mode In the MP 3 mode press to perform track repeat and hold down to perform folder repeat RDM button e Press to play tracks at random in CD mode In the MP 3 mode press to play tracks at random and hold down to
40. ERAL key 3 Touch the HVAC MODE key to set to 5s 10s or 30s 4 Touch the RTN key ESC key or press the ADJ button Basic Operations 2 ZONE Function About the 2 ZONE function The 2 ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit thereby allowing plural listeners to enjoy separate music sources The 2 ZONE function allows internal sources radio DVD VISUAL and external sources via CeNET connection for example CD changers to be played respectively on MAIN zone and SUB zone For examples of playback possibilities see the section Setting the 2 ZONE function The sources of the MAIN zone are played back from the speakers of the vehicle side and those of the SUB zone are from the headphone systems WH100 Sound volume control on the SUB zone is performed by the headphone system WH 100 Notes e Except DVD VISUAL the MAIN and SUB zones cannot simultaneously use sources inside this unit Also external equipment connected via CeNET cannot simultaneously be used e The ISR function cannot be operated when the 2 ZONE function is turned on e The Audio mode function cannot be set for the sources of the SUB zone e If any of following external equipment is connected this function is disenabled 5 1 channel surround decoder DVC 940 e When an iPod is connected the SUB zone
41. ET position STAND CeNET ENT Note e When the DVD changer VCZ625 is connected via optical cable no sound will be output if AUDIO OUT is switched to ANALOG on the changer s GENERAL SETUP menu 74 VRX756VD Clarion Co Ltd All Rights Reserved Copyright 2005 Clarion Co Ltd Printed in Japan A AED USAN AAAS QC 6822K 2005 2 Y Y finwiuuszmeejjuu Dicetak di Jepang 280 8207 00
42. FMI FM2 FM3 9 AM gt FMi 3 Press the lt d or P gt button to tune in the desired station Seek tuning 1 Press the BAND button and select the desired band FM or AM 2 une in to a station If MANU is lit in the display press and hold the BAND button for 1 second or longer MANU in the display goes off and seek tuning is now available The same operation is also available by using the BAND key 3 Press the lt d or P gt button to automatically Seek a station When the gt button is pressed the station is sought in the direction of higher frequencies when the IM button is pressed the station is sought in the direction of lower frequencies The same operation is also available by using the k44 or DP key Selecting stations with the KEY PAD This function displays the KEY PAD on the screen enabling you to tune by entering a frequency ER rmi 9 8 10 MHz Pch1 11 05 am K AAMU COAST a A MIETA ie EA 1 Touch the SRCH key to switch the KEY PAD 2 Touch the 0 9 key corresponding with the frequency you desired When you touch the wrong number 0 9 key you can cancel that to touch the CLR key 3 Touch the ENT key The radio station you required would be tuned 4 Touch the ESC key Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the frequency changes one step at
43. GLISH AUDIO LANGUAGE ENGLISH SUB TITLE LANG OFF PASSWORD 4 Touch the W key Touch the A key to return to the previous menu DVD SETUP PARENTAL LOCAL PARENTAL LEVEL 5 Touch the RTN key ESC key Setting up the screen size Set up the screen size according to the rear view monitor which is connected to this unit 1 Follow the steps 1 to 3 in Selecting the DVD SETUP menu 2 Each time you touch the TV DISPLAY key you can change amoung the screen size in the following order WIDE N PS N LB WIDE x The factory default setting is WIDE When watching through a conventional type of the rear view monitor 4 3 e NPS The leftmost and rightmost areas of the screen are cut off This function allows displaying the important part of image fully on the screen In some cases image is displayed while being panned scrolled e N LB A black zone is created in the top and bottom areas of the screen 00 90 0000 This method displays Cinema Scope and Vista Vision images without cutting them off by creating a black zone on the top and bottom gaps e When watching through a wide type of the rear view monitor 16 9 e WIDE t eo 00 3 Touch the RTN key ESC key Setting up the angle mark display You can set up so that the angle mark appears on scenes where the angles can be switched 1 Follow the steps 1 to 3 in Selecting the DVD SETUP menu
44. L CCD WARNING NTSC PAL VRX756VD 13 14 ADJUST mode menu When a 5 1 ch Surround Decorder is connected ADJUST SSD SIE R BAL FAD vy GENERAL GENERAL menu BEEP IKEVAILUUMI CLOCK AUDIO EXT GENERAL KEY ILLUMI CELO CK AUTO PANEL GONNEGT HVACMODE VRX756VD STATUS AUDIO EXT SPEAKER SEL SPEAKER SEL CENTER SP SURROUND SP SUBWOOFER AUDIO EXT SPEAKER SEI Dolby PLII CONTROL FILTER SPEAKER GAIN DELAY DRC VRX756VD 15 o o D 7 REMOTE CONTROL Remote control unit Pm Signal transmitter Operating range 30 in all directions MUTE P TIME DISP gt Il SET UP ENT lt lt p gt 2 ZONE ISR 44 09 2 GJ C7 ISCNI 1 1 45 65 3 CS RPT Inserting the Batteries VOLUME 1 F mno L5 12 CCS SUB TITLE LZ clarion X J ANGLE SEARCH MODE 1 Turn the remote control unit over then slide the rear cover in the direction of the arrow 4 AA SUM 3 IECR 6 1 5V 2 Insert the AA SUM 3 IECR 6 1 5V batteries that came with the remote control unit facing in the directions shown in the figure then close the rear cover Notes Using batteries improperly can cause them to explode Take note of the following points e When replacing batteries replace both
45. ON VRX756VD 57 5 1 ch Surround Decoder Operations e Dolby PL II CONTROL This function is available only when the MUSIC MODE is selected for Dolby PL II For setup details see Selecting the Dolby PL II Dolby Pro Logic II type 3 1 Touch the Dolby PL Il CONTROL key to show the submenu 3 2 Touch the PANORAMA DIMENSION or CENTER WIDTH key to select respective item PANORAMA Select the ON or OFF OFF is the default value DIMENSION Touch the key to make adjustments between 0 and 6 The default value is 3 CENTER WIDTH Touch the key to make adjustments between O and 7 The default value is 3 FILTER This function is used to select filter frequencies that suit the speakers that are used This function is not available for speakers whose SPEAKER SEL setting is set to OFF 3 1 Touch the FILTER key to show the submenu 3 2 Touch the FRONT HPF CENTER HPF SURROUND HPF or SUB WOOFER LPF key to set respective item FRONT HPF This function can be set to the following four settings 50 Hz 80 Hz 120 Hz or THRGH through THRGH is the default value CENTER HPF This function can be set to the following three settings 50 Hz 80 Hz and 120 Hz 120 Hz is the default value SURROUND HPF This function can be set to the following four settings 50 Hz 80 Hz 120 Hz or THRGH through THRGH is the default value
46. Owner s manual amp Installation manual e BAEN EN Clarion 448 418 S H Wa giay la amp a s ndis Buku Petunjuk Penggunaan dan Petunjuk Penginstalan VRX 56 VD AM FM DVD VIDEO VIDEO CD CD MP3 PLAYER CD CHANGER CONTROLLER WITH 7 LG DISPLAY 7 AET AM FM DVD VIDEO VIDEO CD CD MP3 5N4L CD R ALES I BS 79lx LC ClAZezO 21942 AM FM DVD H C H CIl2 CD CD MP3 2il0 04 CD Xjol HEEA ASautau AM FM DVD VIDEO VIDEO CD CD MPS ISUUMIVAN CD L ULIDSWSINIDAINNH ALAA VIHA 7 AM FM DVD VIDEO VIDEO CD CD MP3 PLAYER CD CHANGER CONTROLLER WITH 7 LC DISPLAY DVD LPINET Toto Clarion gt M gt 6 P oe use gang COMPACT m KI uus dise EE ID3 TAG DIGI CE pets you for purchasing the Clarion VRX756VD This owner s manual is for the VRX756VD Please read this owner s manual in its entirety before operating this equipment After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual This manual includes the operating procedures of the CD changer DVD changer TV tuner iPod control 2 ZONE control 5 1ch surround decoder The CD changer TV tuner 5 1ch surround decoder and DVD Changer have their own manuals but no explanations for operating them are described K X x X Contents Ie FEATURES 9
47. Touch the characters symbols etc shown in the display to input titles tc Centering CLEAR Backspace EJ Space MEMO Memory W A Scroll Notes e Up to 10 characters can be input e To switch the character types touch the scroll key W at the lower left of the display 7 Repeat the step 6 to enter the complete title 8 Touch the MEMO key for 2 seconds or longer to store the title into memory and cancel title input mode VRX756VD 55 Other Functions Title list play Changing over monitor display size You can display a list of titles then select the CD x This function is available only when the panel is track disc or broadcast station to listen to from open e that list Notes x You can not display a title list with the unit in e This function is not available while you are Seek Preset Scan Auto store Tuner or TV driving mode Cancel those operation modes before to e Switch to the VISUAL DVD player DVD video or E display a title list video CD DVD changer TV mode you see 1 Touch the screen TV mode only 2 Touch the LIST key to display the LIST 1 Touch the screen to display the menu then screen touch display size key F WIDE etc Each time you press the DISP button the monitor display size changes in the following order F WIDE gt CINEMA gt NORMAL gt WIDE gt F WIDE e F WIDE full wide mode A
48. a disc is a disc in which a total of two sessions have been recorded The first session is Audio session and the sedond session Data sessioin Your personally created CDs with more than 2 data sessions recorded cannot be played on this DVD video player Discs that cannot be played back This DVD video player cannot play back DVD R DVD RAM DVD ROM CD ROM Photo CDs Some CDs recorded in CD R CD RW mode may not be usable Cause disc characteristics cracks dust dirt dust dirt on players lens etc Note on region numbers The DVD video system assigns a region number to DVD video players and DVD discs by sales area The DVD video region number is marked on the disc jacket as shown below Asia Oceania 22 VRX756VD TV color system This DVD player plays NTSC or PAL discs only and cannot be used for playback of SECAM discs About MP3 playback This unit can play back CD R CD RW discs on which MP3 music data have been recorded For a detailed information see the page entitled Listening to an MP3 About the registered marks etc e This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection tecnology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless othe
49. a time In quick tuning mode you can quickly tune the desired frequency 1 Press the BAND button and select the desired band FM or AM If MANU is not lit in the display press and hold the BAND button for 1 second or longer MANU appears in the display and manual tuning is now available The same operation is also available by using the BAND key 2 Tune into a station Quick tuning Press and hold the lt d or BB button for 1 second or longer to tune in a station Step tuning Press the lt d or P gt button to manually tune in a station Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exists to store individual radio stations in memory Pressing the corresponding DIRECT button recalls the stored radio frequency automatically There are 2 ways available to recall the preset station G Using the DIRECT button 1 Press the BAND button and select the desired band FM or AM 2 Press the corresponding DIRECT button to recall the stored station Press and hold one of the DIRECT buttons for 2 seconds or longer to store that station into preset memory VRX756VD 31 Radio Operations G Using the LIST screen 1 Touch the LIST key 1 OMHz Peh 1 35 Hee We So C QO A S 2 BAYREN 1 BA REGNBOGN 4R RADIO X SR SWR4 MZ 68100 ch 2 Touch the corresponding DIRECT key to recall the stored station x
50. ain after scan playback of all chapters within the title 3 Touch the C SCN key to turn off the scan playback Repeat playback This operation plays back chapters recorded on the DVD Video repeatedly 1 Touch the screen to display the menu then touch the SUB key 2 Touch the REPEAT key then touch the RTN key The message C RPT will be displayed 3 Touch the C RPT key to turn off the repeat playback TOP function The TOP function resets the DVD player to the first chapter of the track 1 Press the BAND button to playback the first chapter chapter No 1 Using the title menu On DVD discs containing two or more titles you can select from the title menu for playback 1 Touch the screen and touch and hold the MENU key for 1 second or longer during playback The title menu screen appears Depending on the disc the title menu cannot be called 2 Touch the KEY key and touch the A V lt d or P gt key to select the item e Depending on the disc items cannot be selected with the ten key buttons 3 Touchthe ENT key 4 Touch the ESC key Switching among languages On discs in which two or more audios or audio languages have been recorded you can switch among the audio languages during playback 1 Touch the screen to display the menu then touch the SUB key 2 Touch the AUDIO key during playback Each time you touch the key you can switch among audio language
51. al of 12 TV stations can be stored 6 TV1 and 6 TV2 This allows you to select your favorite TV stations and store them in memory for later recall There are 2 ways available to recall the preset station G Using the DIRECT button 1 Press the BAND button and select the desired TV band TV1 or TV2 2 To recall a stored TV station press the desired DIRECT button to select that station Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into the preset memory G Using the LIST screen 1 Touch the screen to displav the menu then touch the LIST key 2 Touch the corresponding DIRECT key to recall the stored station You can select the desired band to touch the BAND key x Touch and hold one of the DIRECT key for 2 seconds or longer to store the current station into the preset memory 3 Touch the RTN key to return to the previous mode 5 4 VRX756VD Manual memory G Using the DIRECT button 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station to that preset memory G Using the LIST screen 1 Press the BAND button and select the desired TV band TV1 or TV2 2 Touch the screen to display the menu then touch the LIST key 3 Touch and hold one of the DIRECT key for 2 seconds or longer to store the current statio
52. as follows 1 Press the ADJ button then touch the AUDIO key 2 Touch the TREBLE key 3 When the bass type selection screen is displayed touch the key for the desirable type to select it 4 Touch the A or W key to adjust to desirable level GAIN 6 to 6 The factory default setting is 0 FREQ 8kHz 12kHz The Factory default setting is 12K 5 Touch the RTN key ESC key or press the ADJ button Adjusting the non fader output volume You can adjust the volume output from the unit s non fader output terminal 1 Press the ADJ button then touch the AUDIO key 2 Touch the NON FADER VOL key 26 VRX756VD 3 Touch the A or W key to adjust to desirable level x The factory default setting is 0 Setting range 6 to 6 4 Touch the RTN key ESC key or press the ADJ button Turning on off the MAGNA BASS EXTEND The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function but emphasizes the deep bass sound area to provide you with a dynamic sound 1 Press the ADJ button then touch the AUDIO key 2 Thouch the MeB EX key Each time you touch the MeB EX key you can switch between ON and OFF When the MAGNA BASS EX effect is turned on MeB EX lights in the display 3 Touch the RTN key ESC key or press the ADJ button Basic Operations Adjusting the MONITOR Adjusting
53. ata compression to about 10 percent of its initial size with a high sound quality This means that about 10 music CDs can be recorded on a CD R disc or CD RW disc to allow a long listening time without having to change CDs Note e Some CDs recorded on CD R mode may not be usable 44 VRX756VD Displaying MP3 ID3 TAG titles ID3 information such as title artist and album title can be displayed for an MP3 file containing ID3 Tag information Precautions when creating an MP3 disc File extensions 1 Always add a file extension MP3 or mp3 to an MP3 file by using single byte letters If you add a file extension other than specified or forget to add the file extension MP3 or mp3 the file cannot be played In addition if you uSe upper case and lower case letters capital and small letters mixedly for file extensions normal play may not be possible 2 Files without MP3 data will not play Logical format File system 1 When writing an MP3 file on a CD R disc please select ISO9660 level 1 or level 2 without including expansion format as the writing software format Normal playback may not be possible if the disc is recorded on another format 2 The folder name and filename can be displayed as the title during MP3 play but the title must be within 31 and 27 single byte alphabetical letters and numerals for the folder name and filename respectively without including an extension
54. batteries with new ones e Do not short circuit disassemble or heat batteries Do not dispose of batteries into fire or flames e Dispose of spent batteries properly 1 6 VRX756VD Batteries Rear cover Functions of Remote Control Unit Buttons This remote control unit enables SUB zone when 2 ZONE function is ON The following descriptions of functions are divided respectively into those cases when 2 ZONE is ON and OFF When 2 ZONE function is OFF e Shared modes SOURCE button Press and hold this button for 1 second or longer to turn on or off the power Power on off switches among radio TV etc VOLUME button e Increases and decreases volume MUTE button e Turns mute on and off ISR button e Recall ISR radio station in memory Press and hold for 2 seconds or longer Store current station into ISR memory radio mode only SR is disabled when 2 ZONE is ON DISP button Press to change display on information panel MAIN SUB Clock Time 2 ZONE button e Press and hold this button for 1 second or longer to turn on the 2 ZONE press again to turn 2 ZONE off e Radio TV mode BAND button e Switches reception band 0 9 button Use in the KEY PAD operation screen to set the radio frequency and TV channels cannot be used when TV tuner TTX7504z is connected DISC SEL button e Press to display the RCH SELECT screen SEARCH MODE button e Press to dis
55. check to see if the wiring is correct If it is replace the fuse with a new one with the same amperage rating as the original 15A FUSE 4 To replace the fuse remove the old fuse of the power supply lead and insert the new Fuse holder one Figure10 Figure 10 VRX756VD 69 8 WIRE CONNECTION Radio antenna jack Optical output connector di iPod connector terminal ER Gray Red m Ri g ht m O left White Red Black cA Right MIL O left White f Front audio output terminal lt 2 bear audio output terminal 2 Red om Ri Purpis tem ib Non fader output terminal SS is T 2 ZONE output terminal Yellow og au Video output terminal 3 FE Yellow AL TV tuner input terminal 22 Yellow u O DVD changer input terminal NI JA ONG mt O Audio right Yellow al Video S White es Audio left gt Visual input terminal E e 1 Connecting the PHONE MUTE Terminal The lead included with the unit must be connected to the specified position of the vehicle s connector in order to use the triggered audio mute for cellular telephones function Note Before making any installation disconnect the car battery negative cable 2 Connect to a separately sold external amplifier with a separately sold RCA cord L R 3 Connect to a Rear View Monitor sold separately for the
56. creen Touch the MENU key during playback The DVD menus appears The displayed contents may differ depending on the DVD software e Example showing DVD menu display CINEMA 11 05 am To select the DVD menu contents touch the KEY key The Cross KEY PAD A V 4 gt is displayed Touch the NUM key the display changes to the TEN KEY PAD 0 9 Touch the key to return to the Cross KEY PAD Selectthe DVD menu contents use either the Cross KEY PAD or the TEN KEY PAD according to the disc contents menu Touch the ENT key and touch the ESC key Switching KEY PAD position When the KEY PAD becomes difficult to view in the menu display you can move itto the other side of the screen 11 05 a m Stopping playback Touch and hold the P7II key for 1 second or longer during playback Playback stops 2 To resume playback Touch the P II key and playback resumes from the scene where playback is stopped Pausing playback 1 Press the amp II button or touch the gt II key during playback Playback pauses 2 To resume playback Press the II button and playback resumes VRX756VD 37 DVD Video Player Operations Slow playback 1 Press the gt II button or touch the P7II key then press and hold the gt button or the PI key While the button or key is being pressed slow playback continues at the speed 1 3 tim
57. d the DISP button for 1 second or longer the display toggles among the disc title the track title or the artist titles user title The selected title scrolls once When panel is open titles will not be displayed on the information panel 5 0 VRX756VD When the panel is open 1 Touch the DISC TRACK ARTIST or USER key to select the desired title The selected titles except for the user title scroll once Selecting a CD When the panel ts closed Each of the DIRECT buttons corresponds to a disc loaded into the magazine Selecting a disc from 1 to 6 Press the corresponding DIRECT button 1 to 6 to select the desired disc Selecting a disc from 7 to 12 only when a 12 disc CD changer is used Press the corresponding DIRECT button 1 to 6 for 1 second or more then select the desired disc When the panel is open Each of the DIRECT keys corresponds to a disc loaded into the magazine Selecting a disc from 1 to 6 1 Touch the LIST key 2 Touch the corresponding DIRECT key 1 to 6 to select the desired disc The track selecting screen appears When the E mark of selecting disc is touched the title will scroll 3 Touch the A or W key to select the track and touch the track title When the gl mark of selecting track is touched the title will scroll 4 Touch the RTN key to return to the track selecting screen 6 Selecting a disc from 7 to 12 Only when a 12 disc CD chan
58. e by using the PP key 6 Fast backward Press and hold the lt d button for 1 second or longer When the panel is open the same operation is also available by using the I 4 key TOP function The TOP function plays from the first track track No 1 of the disc e When playing a disc 1 to 6 Press the DIRECT button 1 to 6 with the same number as the CD playing e When playing a disc 7 to 12 only when a 12 disc CD changer is used Press the DIRECT button 1 to 6 with the same number as the CD playing for 1 second or longer Other various play functions This function continues on the disc until it is cancelled or the mode is changed 1 Touch the SUB key TRACK SGAN Disc SGAN EE 2 Touch the touch key of the function you want to play TRACK SCAN track scan playback This scan play locates and plays the first 10 seconds of each track on a disc automatically DISC SCAN disc scan playback This scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer VRX756VD 51 CD Changer Operations TRACK REPEAT track repeat playback The repeat play cintinuously plays the current track DISC REPEAT disc repeat playback After all tracks in the current disc have been played the disc repeat play automatically replays the current disc over from the first track TRACK RANDOM track random playback The rand
59. e is turned on and off MUTE appears when mute is turned on 2 In modes other than radio VISUAL or TV enable the MUTE function by holding the MUTE button depressed for 1 second or longer Regarding the menu screen s RTN and ESC keys e RTN Touch the RTN key to return to the previous screen e ESC Touch the ESC key to return to the main screen In the ADJUST MODE pressing the ADJ button will also cause a return to the main screen In cases where this kind of multiple key response is supported the following kind of notation will be used Touch the RTN key ESC key or press the ADJ button Adjusting the AUDIO Note e When the separately sold 5 1 ch Surround Decoder DVH940 is used the bass and treble tone adjustments cannot be made To adjust the tone refer to the section 5 1 ch Surround Decorder Operations A the balance fader Press the ADJ button then touch the AUDIO key 2 Touch the BAL FAD key 3 Touch the A or W key to adjust to the fader level x The factory default setting is 0 Adjustment range front 13 to rear 13 A key Emphasized the sound from the front speakers V key Emphasized the sound from the rear speakers 4 Touch the lt q or P gt key to adjust to the balance level x The factory default setting is 0 Adjustment range left 12 to right 12 lt q key Emphasized the sound from the left speakers Empha
60. e number of recorded angles are indicated by the icon shown below Subpicture subtitles function A DVD video can record subtitles for up to 32 languages and you can select the language of the subtitles you wish to see e The number of recorded subtitle languages are indicated by the icon shown below Multi story function When a DVD video contains more than one story for a film you can select the story you wish to enjoy The operation procedures vary with the disc observe the instructions for selecting a story provided during playback Dolby digital Dolby digital enables up to 5 1 independent multi channel audio reproduction the same type of surround system that is also used in movie theaters DTS DTS Digital Theater System is a digital sound compression technique developed by Digital Theater Systems Inc This low sound compression format delivers a large amount of data and makes it possible to reproduce a high quality sound Menu screens Menus can be called up during DVD video playback to perform menu setting e Example showing menu display CINEMA 11 05 am ISRGHi pyi MENT pe keppi leSUB es VRX756VD 21 Discs Playable discs This DVD video player can play the following discs Playable discs DVD video discs pn 124 video CDs USE DIGITAL VIDEO CD TEXT COMPACT DIGITAL AUDIO m TEXT VIDEO Audio CDs COMPAGT DIGITAL AUDIO About CD Extra discs A CD Extr
61. e played repeatedly PLAY LIST key Press to display the play list During playback of a play list the icon turns orange VRX756VD 47 ce o o D iPod Operations BROWSE key Press to display the browse menu allowing selections to be made from the item key ARTISTS ALBUMS SONGS GENRES or COMPOSERS When a track is selected from this menu the icon turns orange 2ZONE key Touch continuously for about 1 second or more to switch the 2 ZONE function ON the icon turns orenge Touch again to turn OFF DA key Use to control playback and pause 44 gt PI keys Use to perform track selection Press continuously to enable fast forward and fast backward SHUFFLE key Use to switch the shuffle mode in the order Song Shuffle gt All Shuffle gt Shuffle OFF The default value is Shuffle OFF When enabled this function performs playback of tracks in random order regardless of the order in which they are recorded Note e The title display shows from top level down the SONG title ARTIST name and ALBUM title Press the operation display to scroll the SONG title 48 VRX756VD 6 Operation display Z Play B Pause B II lcon displav XT Play mode 1 BEN Track No EN Sound volume indicator MEN AN Play time 2 M B EX indication Notes 1 Displays status of Repeat Shuffle play 1C 1 track Repeat ACO All Repeat SDC Shuffle
62. ed with SOURCE button is output from 4ch speaker and AUDIO OUT e Sound from mode selected with remote control unit s button is output from NON FADER Switching CONNECT page 28 2 No image is displayed on the rear monitor when a non image mode such as radio CD etc is engaged 9 For safety reasons this image is not displayed when the vehicle is moving The picture can be watched only when the vehicle is standing still and the parking brake is engaged 4 Refer to the section Front monitor lock page 27 VRX756VD 30 ACAUTION When 2 ZONE is ON the NON FADER OUTPUT level is fixed at equivalent to VOL27 high volume When an external amplifier or speakers are attached to the NON FADER OUTPUT connectors do not set the unit to the 2 ZONE mode since a high volume of sound will be suddenly output from the speakers connected to the NON FADER OUTPUT potentially causing damage to the connected amplifier or speakers Radio Operations FM reception For enhanced FM performance the MAGITUNEES 9 tuner includes signal actuated stereo control Enhanced Multi AGC Impulse noise reduction curcuits and Multipath noise reduction circuits Listening to the radio 1 Press the SOURCE button and select the Radio mode The frequency is displayed 2 Press the BAND button and select the radio band Each time the button is pressed the radio reception band changes in the following order
63. een then touching the I lt or PI key The fast forward and fast rewind speed may differ depending on the disc The menu screen may appear when the button is pressed Searching with a chapter title number You can locate the beginning of the scene using the chapter numbers or title numbers recorded on the DVD Video disc 1 Touch the screen to display the menu screen 2 Touch the SRCH key Each time you touch the SFT key you can switch between title number input T and chapter number input C e Title A large segment to divide the data area of the disc e Chapter A small segment to divide the data area of the disc 3 Input the number of the title that vou want to play back with the 0 to 9 key 4 Touch the ENT key Plavback starts from the scene of the input title number or chapter number e f the input title number does not exist or searching with a title number is not allowed the screen image will not change 5 Touch the ESC key DVD Video Player Operations Scan playback Scans and plays back all chapters recorded on the DVD Video the first 10 seconds for each 1 Touch the screen to display the menu then touch the SUB key 2 Touch the SCAN key then touch the RTN key The message C SCN will be displayed After scan playback of all chapters on the disc chapter scanning through the same disc is performed again Depending on the disc the menu may appear ag
64. enu then touch the SRCH key 2 Touch the 0 9 key corresponding with the station you desired When you touch the wrong number 0 9 key you can cancel that to touch the CLR key 3 Touch the ENT key The radio station you required would be tuned 4 Touch the ESC key Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the frequency changes one step at a time In quick tuning mode you can quickly tune the desired frequency 1 Press the BAND button and select the desired band TV1 or TV2 x The same operation can be performed by touching the screen to display the menu screen then touching the BAND key If MANU is not lit in the display press and hold the BAND button for 1 second or longer MANU appears in the display and manual tuning is now available 2 Tune into a station e Quick tuning Press and hold the gt or lt d button for 1 second or longer to tune in a station VRX756VD 53 TV Operations Step tuning Press the MB or lt 4 button to manually tune in a station Notes e The same operation can be performed by touching the screen to display the menu screen then touching the I or gt P I key e Manual tuning is cancelled if you do not operate the unit for 7 seconds longer Only when connecting the TTX7503z or TTX7504z with this unit Recalling a preset station A tot
65. er referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold VOL button e Use this button to increase decrease the volume BAND button e Press this button to switch the receiving bands for radio TV mode etc Press and hold this button for 1 second or longer to switch the SEEK MANUAL tuning modes e Use this button to move to the first track on a disc in the DVD video mode e Use this button to switch to the next disc in the changer mode SOURCE button e Press this button to turn on the power Press and hold this button for 1 second or longer to turn off the power e Press this button to switch the modes such as radio SENSOR e Remote control infrared sensor ISR button e Use this button to enter the ISR Instant station recall standby mode e Press and hold this button for 2 seconds or longer to store the current station into ISR memory in the radio mode x ISR is disabled when 2 ZONE is ON OPEN button e Use this button to open close the liquid crystal panel e Press and hold this button for about 2 seconds or longer so that the liquid crystal panel is positioned horizontally when the liquid crystal panel is open Air Conditioner Operation mode 6 VRX756VD ADJ button e Shows the ADJUST MODE menu to change the settings when the liquid crystal panel is open Press and hold this button for 1 second or longer the liquid crystal panel can be switched to a composite sc
66. erations katakana alam Asia 57 12 IN CASE OF DIFFICULT Y secsi E aga a a aaa aan Sa aaa ai e a 61 13 ERROR DISPLAY S eiii edicti easier Aa aaa ne aa aga a aka a a Ba aaa aaa ina ai a 62 14 OP ECIPIC elg ena aaa gan aja nk aan aa a ad aa aa aaa ae a aana aja aapa a aa aa aaa aaa eales 63 Installation and wire connection manual ssnenunnnnnnnnannnnnannnnnannnnnannnnnnmnnnnamnnnnmmnznnnnnz 65 1 FEATURES B Fully Motorized 7 Widescreen LCD Bi Multi Angle Multi Story Slow Motion E Touch Panel Control Capability E DVD Video CD DA MP3 Video CD Play B ID3 Tag Capability Capability M CDTEXT Capable ll RCA 6 Channel Output ll CD R CD RW Compatible E Built in 53W x 4 Amplifier E 5 1 Channel Decoder for DTS and ll CeNET with Balanced Audio Line Dolby Digital Capability Transmission and Dynamic Noise Bl Optical Digital Output Canceling E 2 ZONE Control B iPod Control 2 VRX756VD 2 PRECAUTIONS A WARNING For your safety the driver should not watch the TV or operate the controls while driving Please note that watching and operating the TV while driving are prohibited by law in some countries Also while driving keep the volume to a level at which external sounds can be heard 1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc DVD CD or the optical parts of the player and proper playback may not be possible If
67. es the normal playback e Slow playback cannot be performed in the backward direction In addition audio cannot be reproduced during slow playback Skipping a chapter searching About chapter Chapter means a small segment to divide the data area of the disc 1 Press the lt d gt button or touch the I4 gt PI key during playback Chapters are skipped as many as the times the button is pressed and playback starts Current lt q or I location PPI or p gt down q gt up Press the gt button and playback starts from the beginning of the next chapter Press the IM button and playback starts from the beginning of the current chapter When this button is pressed again within about 2 seconds playback starts from the beginning of the previous chapter The unit may return to the menu screen when the MB or lt d button is pressed The same operation can be performed by touching the screen to display the menu screen then touching the I or PP key 38 VRX756VD Fast forward and fast backward 1 Press and hold the lt d or P gt button during playback Press and hold the button and the playback speed becomes 5 time faster first and then 20 time faster 3 seconds later Release the button and the normal speed is restored e No audio is reproduced during fast forward and fast rewind operation The same operation can be performed by touching the screen to display the menu scr
68. eset button x When the reset button is pressed frequencies of TV radio stations titles etc stored in memory are cleared The remote Direct rays of the sun fall on When direct rays of the sun fall on the light receptive controller does the light receptive part of the part of the remote controller it may not work not work remote controller The batteries of the remote Check the batteries of the remote controller unit controller unit are dead or there is no battery in the remote controller unit Disc cannot be Another disc is already Eject the disc before loading the new one loaded loaded There is a foreign matter Eject the foreign matter forcibly already in place Sound skips or is Compact disc is dirty Clean the compact disc with a soft cloth noisy Compact disc is heavily Replace with a compact disc with no scratches scratched or warped Sound is bad Water droplets may form on Let dry for about 1 hour with the power on directly after power the internal lens when the car is turned on is parked in a humid place Disc cannot play The view is limited Release the view limitation or change the parental with the display level PARENTAL See the subsection Setting up the parental level VIOLATION shown VRX756VD 61 62 L d E The display is ark The color of the display is light or a shade of color is not good When the VTR is connected the image is dis
69. g with the track numbers recorded on the video CDs 1 Touch the screen 2 Touch the SRCH key 3 Input the number of the track that you want to play back with 0 to 9 key 4 Touch the ENT key Playback starts from the scene of the input track number e f the input track number does not exist or searching with a track number is not allowed the screen image will not change f you are playing a disc with PBC and the PBC function is engaged this operation may not be performed 5 Touch the ESC key Changing audio output You can change the audio output method 1 Touch the screen to display the menu then touch the SUB key 2 Touch the AUDIO key during playback Each time you touch the key you can switch among audio output methods L Left R Right STEREO 42 VRX756VD Displaying the playback status 1 Touch the screen to display the menu then touch the SUB key 2 Touch the P TIME key Playback status is displayed on the screen 3 Touch the screen to turn off the display The display will turn off after 7 seconds On off of Playback Control x The factory default setting is ON On video CDs eguipped with Play Back Control function you can turn it on off 1 Touch the screen to display the menu then touch the SUB key 2 Each time you touch the PBC key you can switch between on and off When the PBC is turned on or off the disc plays from the beginning
70. ger is used Touch the W key Touch the corresponding DIRECT key 7 to 12 to select the desired disc CD Changer Operations Switching to a next disc Disc Up function The disc up function plays from the first track track No 1 of the next disc Press the BAND button Each time you press the BAND button the disc changes to the next disc Selecting with a track number a DAT oem oas 11 05 am SZ USER BLUE GeV 1 Touch the SRCH key 2 Touch the 0 9 key corresponding with the track you desired When you touch the wrong number 0 9 key you can cancel that to touch the CLR key 3 Touch the ENT key The specified track is selected and playback starts Selecting a track e Track up 1 Press the B gt button to move ahead to the beginning of the next track 2 Each time you press the gt button the track advances ahead to the beginning of the next track When the panel is open the same operation is also available by using the PP key e Track down 1 Press the lt d button to move back to the beginning of the current track 2 Press the lt d button twice to move to the beginning of the previous track When the panel is open the same operation is also available by using the dq key Fast forward Fast backward eFast forward Press and hold the gt button for 1 second or longer When the panel is open the same operation is also availabl
71. hows the image of the selected mode VRX756VD 21 Basic Operations Adjusting the GENERAL Setting the BEEP x The sound heard when you make operations is called beep The unit can be set up so that it does not produce this beep sound x The factory default setting is BEEP ON 1 When the panel is open press the ADJ button to select the ADJUST MODE menu 2 Touch the GENERAL key Touch the BEEP key to select ON and OFF 3 Touch the RTN key ESC key or press the ADJ button Setting the button illumination x The factory default setting is GREEN green 1 When the panel is open press the ADJ button to select the ADJUST MODE menu 2 Touch the GENERAL key 3 Touch the KEY ILLUMI key to select RED red or GREEN green 4 Touch the RTN key ESC key or press the ADJ button rae Adjustment When the panel is open press the ADJ button to select the ADJUST MODE menu 2 Touch the GENERAL key Touch the CLOCK key to adjust the time 3 Touch the A V a m or p m key to adjust the time then touch the SET key The time is displayed in 12 hour format 4 Touch the RTN key ESC key or press the ADJ button Setting the Auto Panel When you remove or attach the DCP you can set the liquid crystal panel automatically housing or opening The factory default setting is ON 1 Press the ADJ button to select
72. ing or deformed In deference to the intention of producer an original image can be viewed in a normal mode During superimposed display it becomes a full wide mode When the monitor display size mode is changed only the monitor display size indication superimposed on the screen NORMAL WIDE F WIDE or CINEMA will be changed then the corresponding display size mode will be engaged In the DVD changer when the monitor display size is set in the CINEMA and WIDE PAL modes a part of playback display such as play time may not be shown depending on the play disc In this case change the monitor display size to a mode other than the CINEMA and WIDE PAL modes 5 6 VRX756VD Other Functions Internal amplifier cancel function This function is used to disable the internal amplifier when an external amplifier is connected x The factory default setting is OFF 1 Press the ADJ button 2 Touch the AUDIO EXT key 3 Touch the AMP CANCEL key to select ON or OFF OFF Use with the internal amplifier ON Use with the external amplifier 4 Touch the ESC key to return to the previous screen Triggered audio mute for cellular telepones This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car x This function is not compatible with all cellular telepones Contact your local authorized Clarion dealer for informat
73. ing the root directory can be created for MP3 files items 1 in the illustration However on this unit folders created above the third level will be converted to 2 levels e Folders containing no MP3 files are not recognized e Only folders containing tracks D to 4 in illustration are given numbers and displayed on the list 2 To resume playback press the P7II button Pausing playback 1 Press the gt II button or touch the P7II key during playback Playback pauses or touch the P I key again and playback resumes rd a track searching Press the lt or gt button during playback Tracks are skipped as many as the times the button is pressed and playback starts e Press the B gt button and playback starts from the beginning of the next track e Press the IM button and playback starts from the beginning of the current track When this button is pressed again within about 2 seconds playback starts from the beginning of the previous track This operation skips the track over the folder e The same operation can be performed by touching the screen to display the menu screen then touching the I or PP key Fast forward and fast backward 1 Press and hold the lt d or gt button during playback Press the button and the playback speed becomes 5 time faster first and then 20 time faster 3 seconds later Release the button and the normal speed is restored
74. ion on proper installation and compatibility 5 1 ch Surround Decoder Operations 5 1 ch Surround Decoder control function This function is available when a 5 1 ch Surround Decoder DVH940 is connected When the 5 1 ch Surround Decoder DVH940 sold separately is CeNET connected the 5 1 ch Surround Decoder Control unit DVC940 sold separately cannot be used This section describes operation procedures only For other details refer to the owner s manual supplied with the 5 1 ch Surround Decoder For details on functions of each mode refer to the owner s manual supplied with the DVH940 x Requires an optional amplifier sold separately Note e The 2 ZONE mode is disabled when the DVH940 is connected 1 Press the ADJ button to show the ADJUST MODE menu ADJUST PAISE AU UIS 2 T 2 Touch the AUDIO EXT key AUDIO EKT SPEAKER SEL Dolby PLII CONTROL FILTER SPEAKER GAIN DELAY DRC 3 Touch the reguired keys to make the desired setting e SPEAKER SEL speaker selection This function determines center speaker surround speaker and sub woofer connection 3 1 Touch the SPEAKER SEL key to show the submenu 3 2 Touch the CENTER SP SURROUND SP or SUB WOOFER key to turn speakers on or off depending on what speakers are connected e The factory default setting is ON e The phase of the SUB WOOFER is reversed in the ON setting The default value is
75. isassemble or modify the set in any way Doing so may result in damage Do not draw the liquid crystal panel out and use it as a tray Also subjecting the liquid crystal panel to shocks may result in breakage deformation or other damage Do not let cigarettes burn the display Doing so may damage or deform the cabinet If a problem should occur have the set inspected at your store of purchase Do not insert objects or poke in the space between the liquid crystal panel and the main unit when the panel is tilted Cleaning Do not place anything on the display when the panel is tilted The remote controller may not work if the remote control sensor is exposed to direct sunlight In extremely cold weather the display movement may slow down and the display may darken but this is not a malfunction The display will work normally when the temperature increases Small black and shiny spots inside the liquid crystal panel are normal for LCD products The liquid crystal panel may stop temporarily when it opens or closes when the engine stops or when it is cold The touchkeys on the display operate when slightly touched Do not press the touchkey screen with much force Do not push the case surrounding the touchkey panel with much force This may cause malfunctioning of the touchkeys 20 Cleaning the cabinet Use a soft dry cloth and gently wipe off the dirt For tough dirt apply some neutral detergent diluted in
76. ium brightness 29 steps 1 When the panel is open press the ADJ button to display the ADJUST MODE menu 2 Touch the MONITOR key and touch the DIMMER LEVEL key to adjust the dimmer level 3 Touch the P or key to adjust 4 Touch the RTN key ESC key or press the ADJ button Warning display when CCD camera is installed When a TV tuner sold separately is installed together with optional CCD camera the following warning message is displayed during use of the CCD camera Make sure of safety around your vehicle The factory default setting is ON 1 Press the ADJ button 2 Touch the MONITOR key and touch the CCD WARNING key to switch between ON and OFF 3 Touch the RTN key ESC key or press the ADJ button Switching the VTR system between NTSC and PAL This function is enabled only when the panel is open The factory default setting is NTSC for the Korea market model and PAL for all others Switch to the VISUAL VTR in TV mode you use 1 Press the ADJ button to switch to the ADJUST MODE menu 2 Touch the MONITOR key 3 Touch the NTSC PAL key to select NTSC or PAL 4 Touch the RTN key ESC key or press the ADJ button Front monitor lock 1 Press and hold the ADJ button for 1 second or longer 2 Press the SOURCE button to select the desired mode 3 To cancel the monitor lock press the ADJ button The screen s
77. ly when the wiring connection is complete and power is turned on to the unit first When the power is supplied PUSH PWR appear in the display Press the SOURCE button the system check starts inside the unit When COMPLETE and PUSH PWR appear alternately press once again the SOURCE button N 4 Selecting a mode 1 Press the SOURCE button to change the mode of operation 2 Each time you press the SOURCE button the mode of operation changes in the following order Radio mode 9 DVD mode gt CD changer mode gt DVD changer mode 9 TV mode gt VISUAL mode 9 iPod mode Radio mode x External equipment not connected with CeNET is not selected When 2 ZONE function is ON the main unit s SOURCE button operates for the MAIN zone only use the accessory remote control unit to switch to a SUB zone source Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold Adjusting the volume 1 Operate the VOL button in the direction of the up or down to adjust the volume Increases the volume Decreases the volume The volume level indicated in the display is in a range from 0 minimum to 33 maximum ACAUTION While driving keep the volume at a level at which external sounds can be heard Switching the display When the panel ts closed 1 Press the DISP button to select the desired display Each
78. n into the preset memory Auto store Auto store selects 6 TV stations automatically and stores each one into a preset memory If there are not 6 stations with good reception stations previously stored in memory remain and only the strong stations are stored into memory 1 Press the BAND button and select the desired TV band TV1 or TV2 2 Touch the screen to display the menu then touch LIST key 3 Touch and hold the AS key for 2 seconds or longer The stations with good reception are stored automatically to the preset channels Preset scan Preset scan allows the user to view each preset position before it automatically advances to the next preset This function is useful for searching for desired TV station in memory 1 Touch the screen to display the menu then touch LIST key 2 Touch the PS key to start preset scan The unit starts scanning each station for 7 seconds sequeniially 3 When the desired channel is received touch the PS key again TV Operations Setting the TV diver This function is enabled only when the panel is open x Normally use the TV diver with the ON position You can change the reception setting for the TV antenna connected to the TV tuner 1 Touch the screen to display the menu then touch SUB key 2 Touch the TV DIVER key to set the selected reception setting ON Sets reception emphasizing the visual OFF Sets the diver setting to OFF 3 To
79. ng on the disc up to 9 angles may be recorded For details see the mark of recorded the disc 24 Indicates multi angle Depending on the disc switching may Depending on the disc angles may switch be completely impossible or impossible smoothly or switch with a momentary still on some scenes Image It may take time to switch among When the power is turned on and when the subtitles disc is changed with new one the To turn off subtitles language set at the time of factory shipment is selected If that language has 1 Touch the SUB TITLE key several times not been recorded the language specified and subtitles are turned off on the disc In initial setting e Depending on the disc switching may be Off Subtitle 1 Subtitle 2 completely impossible or impossible on some scenes Subtitle X e t may take time to switch among angles Depending on the disc scenes recorded in two or more angles may be played back Displaying the playback status 1 Touch the screen to display the menu then touch the SUB key Touch the P TIME key during playback Playback status is display on the screen Title number Chapter number Playback time TO1 C001 00 00 19 2 Touch the screen to turn off the display The display will turn off after 7 seconds 40 VRX756VD DVD Video Player Operations Watching a video CD After disc loading the play mode is automatically engaged e Button operation may not be allowed
80. nstruction manual of the TV TUNER E Connecting the parking brake lead Parking brake lamp Connect the lead to parking brake lamp earth in the meter panel Notes e Connecting the parking brake lead to lamp earth allows you to watch TV VTH DVD video video CD when the parking brake is engaged When the parking brake lead is not connected the monitor will stay off 72 VRX756VD CD lead to battery Seed Connect these three leads parking brake signal lead Parking brake lead bright green Parking brake QO SAMPLE SYSTEMS E Sample System 1 l Non fader output Wireless iPod VRX756VD 2 ZONE output Head phone Red WH 100 White WA extension cable sold separately Front Speakers o O Connector cable mm 22 nie CCA 649 600 Rear sold separately 9 Speakers O VISUAL input 56 Yellow RCA video cable sold separately 5B Sg Yellow VIDEO OUT Rear View 85 E Monitor 3 Yellow DVD A C IN VMA5894 ES VMA71 94 RCA cable sold separately CeNET cable included the TV tuner RCA video cable VTR included the TV tuner ID gt TTX7501z CC42 5E D TTX7504z Q J 8 Conector cable D GeNET cable included the CC425E 3 S D Q CeNET Cable 4 included the Changer lt 0 Ferrite clamp N CAT A Included the DVD changer o sold separately CeNet DVD Changer CD Changer VCZ625
81. nstrument panel Stoppers Special Screw Screwdriver Rubber cap Universal mounting bracket Note Set the outer escutch eon so that its metallic parton the back side fits the upper edge of the main unit Figure 6 VRX756VD 67 E Fixed Mount TOYOTA NISSAN and other ISO DIN equipped vehicles This unit is designed for fixed installation in the direction of arrow to remove it Repeat the dashboard same for the other side to remove the If the vehicle is equipped with a factory installed springs from the both sides Figure 7 radio install the main unit with the parts and 2 Secure the mounting brackets to the chassis screws marked Figure 8 as shown in Figure 8 Holes are pre tapped If the vehicle is not equipped with a factory for TOYOTA and NISSAN vehicles installed radio obtain an installation kit to install modification such as drilling new holes of the mounting brackets may be required for the main unit in the following procedure other models 1 Remove the screws from both side of the main unit Then at either side lift the leaf 3 Wire as shown in Section 8 spring until the engaging claws are released 4 Secure the unit in the dashboard and then from the holes and slide the spring to the reassemble the dashboard and the centre panel Engaging claw Figure 7 Mounting bracket x 1 pair for the left and right sides Centre Panel Note 1
82. nsumption When the iPod s internal battery becomes depleted the recharge warning indicator will appear in the iPod s display In this condition the iPod cannot be played even if attached to the VRX756VD Also the VRX756VD s recharging function cannot be used to recharge the iPod As a result when the iPod s battery becomes depleted use the dedicated charger provided with it to recharge the battery 2 ZONE Function e f VISUAL is selected for SUB zone the 2 ZONE function will be canceled when the iPod is connected e When the iPod is connected playback is supported only when SUB zone is set to DVD mode e When connecting the iPod the iPod mode can be selected in the MAIN zone regardless of the ON OFF setting of the 2 ZONE function Controlling the iPod 6 Select the iPod mode 1 Connect the iPod to the connector 2 Press the SOURCE button e The iPod mode can also be selected by touching the iPod icon on the SOURCE menu Title display REPEAT key PLAYLIST key BROWSE key 1120f 144 liansgmed 2338 MI B EH 2ZONE key D A key ea PPI key SHUFFLE key Operation display e Main menu operating keys REPEAT key Switches repeat mode in order 1 track Repeat gt All Repeat gt Repeat OFF The default mode is All Repeat All Repeat is performed for the selected item For example if ALBUMS is selected all tracks recorded on the album will b
83. om play selects and plays individual tracks on the disc in no particular order DISC RANDOM disc random playback The disc random play selects and plays individual tracks or discs automatically in no particular order 3 Touch the RTN key return to the previous screen a D4 TO6 f user B LU E S K DISG THE ONE TRAGK D ES I R E ARTISTA NTELOPE x Use to display current play status and also as the cancel key 4 To cancel play touch the T SCN D SCN T RPT D RPT T RDM or D RDM key 5 2 VRX756VD DVD Changer Operations Only basic operations of DVD changer can be performed from the unit Use the remote control unit to perform the following functions e SCAN REPEAT RANDOM function e V CD PBC function ON OFF e DVD SETUP function AUDIO SUBTITLE ANGLE setting function For details on operations other than those described below see DVD player Operation For details on DVD changer precautions refer to the supplied owner s manual Note e When the DVD changer VCZ625 is connected via optical cable no sound will be output if AUDIO OUT is switched to ANALOG on the changer s GENERAL SETUP menu Selecting a disc When the panel is closed Each of the DIRECT button corresponds to a disc loaded into the DVD changer Press the DIRECT button 1 to 6 and select the desired disc When the panel is open Touch the LIST key otherwise press the DISC SEL button
84. ouch the key for the desirable type to select it The P EQ adjustment contents are as follows SIGNAL x The factory default setting is P NOISE This function selects P NOISE or MUSIC e SPEAKER SELECT The factory default setting is FRONT This function selects FRONT CENTER or SURROUND OBAND x The factory default setting is BANDIT Select the channel to be compensated BAND1 BAND2 BAND3 FREQUENCY x The factory default setting is 1 kHz Select the center frequency that you want to compensate from the range of 18 Hz to 20 kHz 1 3 octave step 31 points 60 x The factory default setting is 1 Set the sharpness of the Q curve to one of the parameters 1 3 5 7 and 20 GAIN x The factory default setting is 0 Adjust the gain output level in the range of 6 dB to 6 dB 1 dB step 13 points 4 Touch the RTN key ESC key or press the ADJ button Selecting the Dolby PLII Dolby Pro Logic II type x The factory default setting is OFF 1 Press the ADJ button and touch the AUDIO key Touch the Dolby PLII key 2 Touch the key for the desirable type to select it 3 When the setting is finished touch the ESC key or press the ADJ button to return to the previous mode 60 VRX756VD Output adjustment of subwoofer volume center volume and balance fader 1 Press the ADJ button and touch
85. play folders at random PBC button e Press to turn on and off the PBC function in video CD mode AUDIO button e Press to switch on the AUDIO function in DVD video and video CD modes SUB TITLE button e Press to display subtitles in DVD video mode ANGLE button e Press to turn the ANGLE function on and off in DVD video mode This button is available only on multiple angles DVDs SLOW button e Press to perform slow playback in DVD video or video CD mode CD changer mode BAND button Press to switch discs DISC SEL button e Used to change the disc gt button Press to play and pause the media 0 9 buttons Press to enter track numbers in the KEY PAD Screen SEARCH MODE button e Press to display the KEY PAD operation screen lt lt W buttons Press to select the next higher or lower playback track e Hold down to perform fast forward and fast backward SCAN button Press to perform track scan and hold down to perform disc scan RPT button Press to perform track repeat and hold down to perform disc repeat 1 8 VRX756VD RDM button e Press to play tracks at random and hold down to play folders at random e DVD changer mode BAND button e Press to switch discs DISC SEL button Used to change the disc Other button operations in this mode are the same as those in DVD player mode When 2 ZONE function is ON SUB zone operations a
86. play the KEY PAD operation screen ENT button e Press to confirm numerics entered in the KEY PAD operation screen lt lt W buttons e Press to select the next higher or lower preset channel in radio and TV mode SCAN button e Press to perform preset scans in the radio and TV modes e Press and hold for 2 seconds or longer to perform the auto store operation in the radio and TV modes RDM button e Press to switch between TV mode and VIR mode e DVD player mode BAND button Press to return to the first chapter in DVD video mode e Press to return to the first track in CD MP 3 mode or video CD mode with the PBC function turned off P TIME button e Press to turn on and off the playtime display in the DVD video and video CD mode gt ii button Press to play or pause video and audio media e Press and hold this button for 1 second or longer to stop video playback in DVD video 0 9 buttons Press to enter DVD video chapters in the KEY PAD screen e Press to set the track number of the Video CD with the PBC function turned off CD track number or MP 3 track number in the KEY PAD screen SEARCH MODE button Press to display the KEY PAD operation screen RTN button e Press to switch the screen display while the MENU screen is being displayed However it may occur that this button operation dose not work on some discs MENU button Press to display menu stored on video disc
87. re supported but button functions are limited as follows e Shared modes SOURCE button e Turns power ON OFF e When power is ON switches between DVD mode and VISUAL mode When iPod is connected however this button is disabled since mode is limited to DVD VOLUME button e Controls sound volume for MAIN zone source MUTE button e Controls audio mute function for MAIN zone source ISR button Not supported DISP button e Press to change display on information panel MAIN SUB gt Clock Time 2 ZONE button e Press and hold this button for 1 second or longer to turn on 2 ZONE function press again to turn 2 ZONE off Radio TV mode x Not supported ODVD player mode Can be operated the same as when 2 ZONE function is OFF However P TIME button SET UP button are disabled and MENU button is disabled when liguid crystal panel is open OCD changer mode This button is disabled when MAIN zone is set to CD changer mode ODVD changer mode This button is disabled when MAIN zone is set to DVD changer mode 8 DCP The control panel can be detached to prevent theft When detaching the control panel store it in the DCP DETACHABLE CONTROL PANEL case to prevent scratches We recommend taking the DCP with you when leaving the car Removing the DCP 1 Press the SOURCE button for 1 second or longer to turn off the power 2 Deeply push in FRONT OPEN button to unlock
88. red in preset memory in order This function is useful when searching for desired station in memory 1 Touch the LIST key 2 Touch the PS key to start preset scan The unit starts scanning each station for 7 seconds sequentially 3 When the desired station is turned in touch the PS key again to continue receiving that station Instant station recall ISR Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button The ISR function even operates with the unit in other modes e ISR memory 1 Select the station that you wish to store in ISR memory 2 Press and hold ISR button for 2 seconds or longer e Recalling a station with ISR 1 In any mode press ISR button to turn on the radio function and tune the selected radio station ISR appears in the display Press ISR button again to return to the previous mode SR is disabled when 2 ZONE is ON DVD Video Player Operatjons Changing DVD System Settings Notes e If the SETUP operation is performed in the middle of DVD video play the disc plays from the beginning Various settings of the SETUP menu cannot be made with the remote control unit Selecting the DVD SETUP menu 1 Touch the screen to show the menu screen 2 Touch the SUB key to display the SUB menu 3 Touch the SETUP key to display the DVD SETUP menu DVD SETUP TV DISPLAY WIDE ANGLE ON MENU LANGUAGE EN
89. reen to lock the monitor To enable this function go to the GENERAL menu within the ADJUST MODE menu and use the CONNECT key to select NAVI or OTHERS DIRECT buttons e Use this button to select a preset channel in the radio TV mode Use this button to select a disc in the changer mode Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory lt lt W buttons e Use this button to tune to a station in the radio TV mode e Use this button to select a track in the CD Video CD MP3 iPod and CD changer mode Use this button to select a chapter in the DVD video and DVD changer mode gt II button e Press this button to enter the play pause mode in the DVD video mode iPod mode and changer mode Press the button again to resume playback Press and hold this button for 1 second or longer to mute the sound in the DVD video mode iPod mode and changer mode Press this button to mute the sound in the radio TV VISUAL mode DISP button e Use this button to switch the indications such as play status on the information panel FRONT OPEN button e Use this button to open the Front panel When the Front panel open TILT button Use this button to adjust the angle of the liquid crystal panel in 5 steps when the liquid crystal panel is open e When the panel is closed holding this button depressed for 2 seconds or longer will enable the
90. rwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc iPod is for legal or rightholder authorized copying only Don t steal music iPod is a trademark of Apple Computer Inc registered in the U S and other countries 11 OPERATIONS Basic Operations ACAUTION When the unit is turned on starting and stopping the engine with its volume raised to the maximum level may harm your hearings Be careful about adjusting the volume Note e Use this unit after starting the engine Engine ON position Turning on and off the power Note e Be careful about using this unit for a long time without running the engine If you drain the cars battery too far you may not be able to start the engine and this can reduce the service life of the battery Press the SOURCE button The illumination and display on the unit light up The unit automatically remembers its last operation mode and will automatically switch to display that mode 3 Press and hold the SOURCE button for 1 second or longer to turn off the power for the unit Note e About the SYSTEM CHECK The confirmation of connected eguipment must be performed for this unit on
91. s Depending on the disc up to 8 audios may be recorded For details see the mark of the disc Indicates that 8 audios have been recorded When the power is turned on and when the disc is changed with a new one the language set at the time of factory shipment is selected If that language has not been recorded the language specified on the disc Depending on the disc switching may be completely impossible or impossible on some scenes It may take time to switch among audios VRX756VD 39 DVD Video Player Operations Switching subtitles Switching angles On DVD discs in which two or more subtitle On DVD discs in which video images have been languages have been recorded you can recorded in two or more angles you can switch e switch among the subtitle languages during among the angles during playback playback This operation can be performed when the w 1 Touch the screen to display the menu Setting up the angle mark display function E then touch the SUB key see P 33 is set to ON 2 Touch the SUB TITLE key during 1 Touch the screen layback P 2 Touch the GX Angle mark key during Each time you touch the key you can playback switch among subtitles Each time you touch the key you can switch Depending on the disc up to 32 kinds of among angles subtitles may be recorded For details see the mark of the disc 8 Indicates that 8 kinds of subtitles have been e Dependi
92. s press the RESET button If the problem persists turn off the power and consult your store of purchase x When the reset button is pressed frequencies of TV radio stations titles etc stored in memory are cleared CD CHANGER VRX756VD 63 c o J D 14 SPECIFICATIONS FM Tuner Frequency Range 87 0 MHz to 108 0 MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15 dBf Alternate Channel Selecitivity 70 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 531 kHz to 1629 kHz Usable Sensitivity 28 dBuV DVD player System Digital Versatile Disc System with CDDA capable Usable discs DVD video disc Compact disc Frequency Response 20Hz to 20 kHz CD 1 dB Signal to Noise Ratio 100 dB 1 kHz IHF A Dynamic Range 100 dB 1 kHz Distortion 0 01 Audio Amplifier Rated power output 18 W x 4 20 Hz to 20 kHz 1 4 Q Maximum power output 212 W 53 W x 4 Speaker impedance 4 Q 4 to 8 Q Input Audio input 130 60mVrms High 600 x80mVrms Mid 840 x100mVrms Low input impedance 10 kQ or greater Video input 1 0 0 2 Vp p input impedance 75 Q Video output Video output 1 0 40 2 Vp p output impedance 75 Q 64 VRX756VD LCD Monitor Screen Size 7 inch wide type 152 mm Width x 85 mm Height Display method Transmission type TN liquid crystal display Drive method TFT thin film transistor
93. sized the sound from the right speakers 5 Touch the RTN key ESC key or press the ADJ button gt key Adjusting the BASS The bass gain bass freguency center freguency and bass Q can be adjusted as follows 1 Press the ADJ button then touch the AUDIO key 2 Touch the BASS key 3 When the bass type selection screen is displayed touch the key for the desirable type to select it 4 Touch the A or W key to adjust to desirable level GAIN 6 to 8 The factory default setting is O FREQ 50Hz 80Hz 120Hz The factory default setting is 50 Q 1 1 25 1 5 2 The factory default setting is 1 5 Touch the RTN key ESC key or press the ADJ button VRX756VD 25 Basic Operations Adjusting the MID The MID gain MID frequency center frequency and MID Q can be adjusted as follows 1 Press the ADJ button then touch the AUDIO key 2 Touch the MID key 3 When the bass type selection screen is displayed touch the key for the desirable type to select it 4 Touch the A or W key to adjust to desirable level GAIN 6 to 6 The factory default setting is 0 FREQ 700Hz 1kHz 2kHz The factory default setting is 1k Q 1 5 2 The factory default setting is 2 5 Touch the RTN key ESC key or press the ADJ button Adjusting the TREBLE The treble gain and treble freguency center freguency can be adjusted
94. ted depending on the mounting angle of the unit or light coming into the car e To adjust the angle 1 Every time the TILT button is pressed the liquid crystal panel tilts forward or backward The adjusted angle is stored in memory Adjustment is possible within the range 70 to 110 or within the range set by panel calibration There are 5 adjustable angle available Basic Operations Housing the liquid crystal panel 1 Press the OPEN button and the liquid crystal panel is housed automatically Note e When leaving this unit unused for a long period of time or leaving your car be sure to house the liquid crystal panel into the main unit Turning the liquid crystal panel horizontal Air conditioner operation mode When the way the liquid crystal panel is mounted hinders the operation of the air conditioner the position of the panel can be turned horizontal temporarily 1 Press and hold the OPEN button when the liquid crystal panel is upright and release the button when a beep is heard 2 The liquid crystal panel turns horizontal x Press the OPEN button again when the liquid crystal panel is in the horizontal position and the panel returns to the original position The unit can also be set so that the panel returns to its original angle after a set time in the horizontal position See P 28 Mute 1 When in the radio VISUAL or TV mode each time you press the MUTE button mut
95. the AUDIO key Touch the DETAIL key 2 To make an adjustment on e Subwoofer volume adjustment 2 1 Touch the SUBWOOFER VOL key to adjust to desirable level x The factory default setting is 0 Setting range 6 to 3 6 Center volume adjustment 2 1 Touch the CENTER VOL key to adjust to desirable level x The factory default is 0 Setting range 6 to 0 e Balance Fader adjustment 2 1 Touch the BAL FAD key Touch the A or WI key to adjust the balance level LA key emphasized the sound from the front speakers W key emphasized the sound from the rear speakers 2 2 Touch the lt q or P gt key to adjust the fader level lt q key emphasized the sound from the left speakers gt key emphasized the sound from the right speakers 3 Touch the RTN key ESC key or press the ADJ button 12 IN CASE OF DIFFICULTY mem Mem GENERAL DVD Player Power does not Fuse is blown Replace with a fuse of the same amperage If the turn on fuse blows again consult your store of purchase No sound is Nothing happens The microprocessor has Turn off the power and remove the DCP when buttons are malfunctioned due to noise Press the reset button for about 2 seconds with a pressed etc thin rod Note When the reset button is pressed turn off the Display is not ACC power accurate SECURITY NG P he The R
96. the ADJUST MODE menu 2 Touch the GENERAL key Touch the AUTO PANEL key to set ON OFF or CLOSE 28 VRX756VD ON The liquid crystal panel houses automatically after removing the DCP And the liquid crystal panel open automatically after attaching the DCP OFF Normal operation CLOSE The liquid crystal panel houses automatically after removing the DCP 3 Touch the RTN key ESC key or press the ADJ button Switching CONNECT connect Make the following settings when an external device is connected to the Visual terminal NAVI when a navigation system is connected x When a navigation system is connected use the monitor lock function Locking the monitor locks the screen size in F WIDE mode full wide and the VTR system to NTSC OTHERS for external devices other than a navigation system when no external devices are connected x The factory default setting is NONE 1 When the panel is open press the ADJ button to display the ADJUST MODE menu 2 Touch the GENERAL key Touch the CONNECT key to select NAVI or OTHERS or NONE 3 Touch the RTN key ESC key or press the ADJ button NONE Time setting in air conditioner operation mode This setting can be used to adjust the time the panel stays in the horizontal position when in the air conditioner operation mode x The factory default setting is 10s 1 Press the ADJ button 2 Touch the GEN
97. the set will not hamper operation of the shift lever before choosing the place of installation Figure 2 x I By Shift lever Shift lever check that it does not E the LCD Figure 2 3 Install the unit within 30 of the horizontal plane Figure 3 Max 30 Figure 3 4 If you have to do any work on the car body such as drilling holes consult your car dealer beforehand 66 VRX756VD 5 Usethe enclosed screws for installation Using other screws can cause damage Figure 4 Chassis Chassis Max 8 mm M5 screw Figure 4 6 The source unit has mounting screw holes for NISSAN N marks and TOYOTA T marks vehicles T N T N T N Figure 5 5 INSTALLING THE MAIN UNIT E Universal Mount 1 Place the universal mounting bracket into the instrument panel use a screwdriver to bend each stopper of the universal mounting bracket inward then secure the stopper as shown in Figure 6 2 Wire as shown in Section 8 3 Insert the main unit into the universal mounting bracket until it locks 4 Mount the outer escutcheon so that all the dealer for details hooks are locked 2 Fasten the front stopper securely to prevent the main unit from coming loose o8 gt SR ss 2 iz E Notes 1 Some car models reguire special mounting kits for proper installation Consult your Clarion e Console opening dimensions 182 mm Rear fastening hole of vehicle p I
98. tically te TETI x While the liquid crystal panel is opening or closing the blue LED of the SOURCE button and other buttons will flash Notes e If the liquid crystal panel stops in the middle of its operation press the OPEN button to house the panel and press the button again to stand it up The unit enters the same display mode as the display was turned off the last time e If the liquid crystal panel stops at any point less than 70 the electronic beep will sound 70 24 VRX756VD Panel calibration function The liguid crystal panel s maximum angle of inclination can be adjusted to match the installation configuration within the automobile e Perform this with the panel in its closed position 1 Deeply push in FRONT OPEN button to unlock the front panel 2 Press and hold the TILT button for 2 seconds or longer until the electronic beep is heard 3 The beep will sound twice and the panel will rise and the calibration function will begin 4 After completion of the calibration the panel will close automatically If the panel does not strike the instrument panel or other parts of the car during calibration the maximum inclination will be 110 x If the panel strikes a car part during calibration within a range of 70 inclination the maximum downward inclination will be 70 Adjusting the angle of the liguid crystal panel The angle of the liquid crystal panel can be adjus
99. time you press the DISP button the display switches in the following order MAIN Display 1 SUB Display Clock Time Display MAIN Display Notes e Once selected the preferred display becomes the default display When a function adjustment such as volume is made the display momentarily switches to that function s display then returns back to the preferred display several seconds after the adjustment e If a title has been input it is shown in the SUB display If no title has been input NO TITLE appears in the display To input a title refer to the subsection Entering titles in Other Functions section e For CD and TV some special characters of the title will not be displayed on the Information Panel of the DCP In this case those characters will only be left blank e SUB displays do not appear when panel is open e SUB displays do not appear when 2 ZONE function is ON VRX756VD 23 Basic Operations Opening and turning the liquid crystal panel A WARNING e To prevent the battery from going dead operate this unit with the engine running if possible e When the liquid crystal panel is operat ing be careful not to get your hand or fin ger caught between the panel and main unit or the instrument panel of the car e Do not move the liquid crystal panel by hand Standing up the liquid crystal panel 1 Press the OPEN button and the liquid crystal panel comes out and stand up automa
100. title listis displayed The following functions can be carried outin atitle list display OTUNER A title of a station stored in the presets 1 to 6 or freguency is displayed OCD changer DISC titles for discs 1 to 6 are displayed By changing over a display page in case of 12 CD changer disc 7 to The whole image elongates horizontally 12 can be displayed When there is not e CINEMA cinema mode any disc in a changer NO DISC is The image at both top and bottom in a displaved displav disappears TV title of a channel stored in the e NORMAL normal display presets 1 to 6 or a channel number is There is a black area at both right and left ends of a displav In case of normal TV broadcasting 4 3 the image can be shown without being cut or deformed e WIDE wide mode displaved 3 Touch the DIRECT key 1 to 6 to select one of the items 1 to 6 and reproduce the selected broadcast station or disc x In case of 12 CD changer touch the W key to change over to a list displav of discs 7 to NTSC The image at right and left ends in a 12 display elongates horizontally 4 Touch the RTN key again to return to the PAL The image may be slightly cut off at previous mode the top and bottom of the screen Notes e When a normal 4 3 size image not being a wide one is viewed by displaying it fully on a wide monitor display in a wide mode or a full wide mode a part of the peripheral image will be lack
101. turbed When the TV tuner is connected the image gets unclear The TV tuner has a double or triple image The TV tuner has spots or stripes in the image There are red green and blue points in the display VRX756VD M Cmm Mean The image is not The parking brake is not Check that the parking brake is applied displayed pulled The brightness control is too Adjust the brightness properly low The operating condition is not good The headlight of the vehicle is lit The color is not adjusted adequately Improper NTSC PAL setting Bad receiving condition Bad receiving condition Presence of jamming The temperature inside the vehicle may be 0 C or less Set to an appropriate temperature 25 C or so and check it again The display is made dark at night to prevent the glare When the headlight of the vehicle is lit in the daytime the display gets dark Check that COL and HUE are adjusted properly Set the NTSC PAL properly according to the VTR A radio wave may not reach sufficiently due to obstruction of mountains or buildings Check it again at a place where a radio wave can be received properly It may be under the influence of radio wave reflected by mountains or buildings Check it again after changing place or direction It may be under the influence from automobiles streetcar power cable neon sign and so forth Check it again after changing place This is
102. uch the RTN key to return to the previous mode Setting the TV area When the TTX7504z is connected This function is enabled only when the panel is open When you select the TV area TV reception area the TV tuner area setting changes 1 Touch the screen to display the menu then touch the SUB key 2 Touch the TV AREA key to display a list of country name 3 Touch the COUNTRY NAME key to select a desired country 4 Touch the RTN key to return the previous mode Other Functions Entering titles Titles up to 10 characters long can be stored in memory and displayed for Radio stations CD TV stations and CD changer The numbers of titles that can be entered for each mode are as follows Mode Number of titles TUNER mode 30 titles CD changer mode Number of titles CDC655Tz connected 100 titles DCZ625 connected 100 titles You cannot enter titles with the unit in Seek Preset Scan Auto store TUNER or TV mode Cancel each of those operations before entering titles 1 Press the SOURCE button to select the mode you want to enter a title TUNER CD CD changer or TV 2 Select and play a CD in the CD changer ora CD track or tune in to a Radio station or a TV station for which you want to enter the title 3 Touch the screen TV mode only 4 Touch the LIST key to display the LIST screen 5 Touch the USER TTL key The title input mode display appears 6
103. une in the desired TV station x When the panel is open the same operation is also available by using the I4 or PPI key Watching a video The TV tuner has a VTR input terminal to which 1 external device can be connected Connect a 12V video cassette player VCP or video cassette recorder VCR to the TV tuner input terminal 1 Touch the screen to display the menu then touch the SUB key 2 Touch the EXTRA SELECT key in the menu screen when the VTR is displayed 3 To return to the TV broadcast touch the screen again and touch the EXTRA SELECT key in the menu screen Seek tuning 1 Press the BAND button and select the desired TV band TV1 or TV2 x The same operation can be performed by touching the screen to display the menu screen then touching the BAND key If MANU is lit in the display press and hold the BAND button for 1 second or longer MANU in the display goes off and seek tuning is now available 2 Press the MB or lt d button to automatically seek a station Press the MB button to automatically tune up the frequency band to the next available TV station press the lt lt button to automatically tune down x The same operation can be performed by touching the screen to display the menu screen then touching the I lt or PP key Selecting with a station number Note e Cannot be used when TV tuner TTX7504z is connected 1 Touch the screen to display the m
104. y insert a disc with the screen closed Even when the screen is closed however the recessed disc slot may be difficult for a driver to see care is needed whenever inserting discs No Non Be sure to unfold and read the next page ALR FAIL FR BIE A CH ufo x amp H41 SILAAlL lusmnamujiuluisonununnolu Pastikan anda membuka dan membaca halaman berikutnva VRX756VD 4 GU D gt gt PA gt gt cD t gt 3 CONTROLS 26 HES ayuaauan PENGONTROLAN VOL BAND a ny Nn VRX756VD Cane B H ALL SCNRPT RD SOURCE clarion FRONT OPEN Sp SENSOR DISP ISR gt WM lt 4 gt gt With the Front panel open Bi HRT A AT 2124 THEO 932 HENA i dati muenim 131141 With Front panel open ps eee N Clarion We r VO m ont Hi P hi jang POWER 53Wx4 m MUTE n MLOCK HIGH w ie eee se oi fF fron pd e FRONT OPEN Note Be sure to unfold this page and refer to the front diagrams as you read each chapter REED MESS BALEALAA MEH HE o F 0 HONE BAA 24 YE HE uj AA TAS AKSK naama lUsAAANYTAWULN WIS WauUUNUA INVDJUNIFILMU NO D WAN NUAASUN Catatan Pastikan anda membuka halaman berikut dan mengacunya pada diagram di depan pada saat membaca setiap bab 5 VRX756VD 4 NOMENCLATURE Names of Buttons Note e Be sure to read this chapt
105. y the menu screen then touching the I or P key TOP function The TOP function resets the DVD player to the first track of the disc 1 Press the BAND button to playback the first track track No 1 Fast forward and fast backward 1 Press and hold the lt d or gt button during playback Press and hold the button and the playback speed becomes 5 time faster first and then 20 time faster 3 seconds later Release the button and the normal speed is restored Searching with a track number This operation allows searching using the track numbers recorded on the CDs 1 Touch the SRCH key 2 Inputthe number of the track that you want to play back with 0 to 9 key 3 Touch the ENT key Playback starts from the scene of the input track number e Ifthe input track number does not exist or searching with a track number is not allowed the screen image will not change 4 Touch the ESC key Selecting a track on the LIST screen This function allows you to select tracks from a displayed list 1 Touch the LIST key The list menu will appear 2 Press the A or W button to change the track display 3 Touch the desired track title key The corresponding track will begin playback e The titles will scroll when the selected track s dl mark is touched 4 Press the RTN key to return to the previous Screen Other various play functions 1 Touch the SUB key TRACK SGAN REPEAT

Download Pdf Manuals

image

Related Search

Related Contents

MOVITRAC B - Operation, Start Up, and Troubleshooting Training  れだけは知っておきたい  制限付一般競争入札の参加方法  Lenoxx O25 User's Manual  User Manual ECOMPACT® 23E/60E  StarBoard FX-TRIO-77S - Hitachi Solutions Europe  広域酪農地域向け農業機械 普及促進事業報告書  ICC IC107DA4IV  Lexmark S515  1400dd - Nel-Tech Labs, Inc.  

Copyright © All rights reserved.
Failed to retrieve file