Clarion RDX655DZ User's Manual
Contents
1. Press DISP button 10 to select a character Each time you press DISP button 10 the char acter changes in the following order Capital letters Numbers 3 Capital letters Turn the Rotary knob 15 to select the desired character Turning the Rotary knob 15 clock wise moves the cursor to the next character turning it counterclockwise moves the cursor to the previous character Repeat steps 5 to 7 to enter up to 10 charac ters for the title Press and hold ENT button 2 for 2 seconds or longer to store the title into memory and cancel title input mode Clearing titles 1 Play a CD or a CD in a CD changer or tune a radio station or TV station that you want to clear the title for Press DISP button 10 and display the sub title Press TITLE button 4 TITL appears in the display and the display switches to the title input display Press BND button 12 Press and hold ENT button 2 for 2 seconds or longer to clear the title and cancel the title input mode 16 RDX655Dz Message display When the unit is powered on or off a message is displayed The user can turn this message dis play on or off The factory default setting is ON 1 Press ENT button Turn the Rotary knob 15 clockwise to set the Press and hold ADJ button 4 for 1 second or longer to switch to the adjus2. RDM No function Random play Random play Switches between DOLBY NR When pressed and TV and VTR MONI held for 2 seconds Disc random play Some of the corresponding buttons on the source unit and remote control unit have different functions RDX655Dz 9 7 OPERATIONS Basic Operations A CAUTION Be sure to lower the volume before switch ing off the unit power or the ignition key The unit remembers its last volume setting If you switch the power off with the volume up when you switch the power back on the sudden loud volume may hurt your hearing and dam age the unit The clock is displayed when the ignition key is turned to the ACC accessory or IGN igni tion on position even when the unit power is off In some cars the clock may momen tarily disappear when the ignition key is turned to the START position The clock will reappear after the engine has started and the ignition key is released to the IGN ignition on position Turning on off the power Note Be careful about using this unit for a long time with out running the engine If you drain the car s bat tery too far you may not be able to start the en gine and this can reduce the service life of the battery Press POWER button 3 The illumination and display on the unit light up The unit automatically remembers its last operation mode and will automatically switch to display that mode Press and hold POWE
3. Notes e Specifications comply with EIA Standards Audio Maximum Power Output 160 W 40 W x 4 ch ElAJ Continuous Average Power Output 14Wx 4 into 4 Q 20 Hz to 20 kHz 1 THD Bass Control Action 30 Hz 15 dB Treble Control Action 10 kHz 10 dB Line Output Level CD 1 kHz 4V General Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Current Consumption Less than 15 A Speaker Impedance 4 Q 4 Q to 8 Q allowable Weight Source unit 3 75 lb 1 7 kg Weight Remote control unit 1 oz 30 g including battery Dimensions Source unit 7 Width x 2 Height x 6 1 8 Depth 178 W x 50 H x 155 D mm Dimensions Remote control unit 1 3 4 Width x 4 5 16 Height x 1 1 8 Depth 44 W x 110 H x 27 D mm Specifications and design are subject to change without notice for further improvement 24 RDX655Dz
4. If 2 MD changers are connected press FNC button 3 to select the MD changer for play If NO DISC appears in the display load MDs into the MD changer Pausing play 1 Press Play pause button 2 to pause play PAUSE appears in the display 2 To resume play press Play pause button again N Switching disc titles and track titles This unit can display disc titles and track titles already entered on MDs Titles up to 128 characters long can be displayed by scrolling the titles Titles cannot be entered for MDs with this unit 1 Press DISP button 10 to display the title The disc title or track title is displayed 2 Each time you press and hold DISP button 10 for 1 second or longer the display toggles between the disc title and the track title Scrolling titles When a title is longer than 11 characters you can scroll through it with the following operation 1 Display the MD title disc or track 2 Press TITLE button 4 The display scrolls through the title Selecting an MD Each of the Direct button 9 corresponds to an MD loaded into the MD changer Press the cor responding Direct button 9 1 to 6 to select the desired disc If an MD is not loaded in a slot of the MD changer pressing the Direct button 9 corresponding to its disc number is invalid Select
5. enhancer 1 2 or 3 is set Z EHCR 3 BAL 3 FAD 3 Function mode Adjusting the bass 1 Press A M button 13 and select BASS 2 Turning the Rotary knob 15 clockwise empha sizes the bass turning it counterclockwise attenuates the bass x The factory default setting is 0 Adjustment range 6 to 6 3 When the adjustment is complete press A M button 13 several times until the function mode is reached Adjusting the treble 1 Press A M button 13 and select TREB 2 Turning the Rotary knob 15 clockwise empha sizes the treble turning it counterclockwise attenuates the treble x The factory default setting is 0 Adjustment range 6 to 6 3 When the adjustment is complete press A M button 13 several times until the function mode is reached Adjusting the balance 1 Press A M button 13 and select BAL 2 Turning the Rotary knob 15 clockwise empha sizes the sound from the right speaker turn ing it counterclockwise emphasizes the sound from the left speaker x The factory default setting is 0 Adjustment range L13 to R13 3 When the adjustment is complete press A M button 13 several times until the function mode is reached Adjusting the fader 1 Press A M button 13 and select FAD 2 Turning the Ro
6. esta pagina y consulte los diagramas 5 RDX655Dz 4 NOMENCLATURE Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold 5 DCP The control panel can be detached to prevent theft When detaching the control panel store it in the DCP DETACHABLE CONTROL PANEL case to prevent scratches We recommend taking the DCP with you when leaving the car Names of Buttons 1 OPEN button 2 ENT enter button Play pause button 3 POWER button FNC function button 4 TITLE button ADJ adjust button 5 SCN scan button PS AS preset scan auto store button RPT repeat button 7 RDM random button 8 Z EHCR z enhancer button Display Items 9 Preset buttons 1 to 6 Direct buttons 1 to 6 7 to 12 10 DISP display button 11 ISR instant station recall button 12 BND band button TOP button 13 A M audio mode button LD loudness button 14 SEARCH button 15 Rotary knob 16 CD insertion slot 17 Eject button Single disc indication B Disc in indication LD loudness indication El A M audio mode indication Bl Function mode indication The names of modes being selected etc are displayed MANU manual indication ST stereo indication Z EHCR z enhancer indication DISC indication Preset channel indic
7. light in the dis play and the disc repeat play starts 2 To cancel the disc repeat play press and hold RPT button 6 again DISC and RPT go off from the display and normal play resumes on the current track Random play The random play selects and plays individual tracks on the disc in no particular order This function continues automatically until it is canceled 1 Press RDM button 7 RDM lights in the dis play and the random play begins 2 To cancel the random play press RDM but ton 7 again RDM goes off from the display and normal play resumes Disc random play The disc random play selects and plays individual tracks or discs automatically in no particular order This function continues automatically until it is canceled 1 Press and hold RDM button 7 for 1 second or longer DISC and RDM light in the dis play and the disc random play starts 2 To cancel the disc random play press and hold RDM button 7 again DISC and RDM go off from the display and normal play resumes from the current track MD Changer Operations MD changer functions When an optional MD changer is connected through the CeNET cable this unit controls all the MD changer functions This unit can control a total of 2 changers MD and or CD Press FNC button 3 and select the MD changer mode to start play
8. of Remote Control Unit Buttons CD changer MD changer FUNG Turns power on and off When pressed and held for 1 second Turns power off Switches among radio CD CD changer MD changer and TV BAND Switches reception Plays the first track Moves the next disc Switches reception DISC UP band Top play in increasing order band PROG TOP VOLUME Increases and decreases volume in all modes SEARCH Moves preset Moves tracks up Moves tracks up Moves preset channels up and and down and down channels up and down When pressed and When pressed and down held for 1 second held for 1 second Fast forward Fast forward fast backward fast backward PLAY PAUSE No function Switches between Switches between No function playback and pause playback and pause MUTE Turns mute on and off ISR Recalls ISR radio station in memory Press and hold for 2 seconds or longer Stores current station into ISR memory radio mode only Switches among main display sub display and clock display Preset scan Scan play Scan play Preset scan When pressed and When pressed and When pressed and held for 2 seconds held for 2 seconds held for 2 seconds Auto store Disc scan play Auto store No function Repeat play Repeat play No function When pressed and held for 2 seconds Disc repeat play
9. the center of the insertion slot x When a 3 CD is loaded SINGLE lights in the display 3 Close the FLIP DOWN PANEL 44 CAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL Notes e If the FLIP DOWN PANEL does not open fully gently open with your hand After loading a CD always close the FLIP DOWN PANEL Listening to a CD already inserted Press FNC button 3 to select the CD mode Play starts automatically If no CD is loaded in the unit NO DISC appears in the display Pausing play 1 Press Play pause button 2 to pause play PAUS appears in the display 2 To resume CD play press Play pause button 2 again Ejecting a CD 1 Press OPEN button 1 to open the FLIP DOWN PANEL 2 Press Eject button 17 to eject the CD Take it out from the ejected position DISC CHK appears in the display when the CD is left in the ejected position 3 Close the FLIP DOWN PANEL 14 RDX655Dz ACAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL Notes e If the FLIP DOWN PANEL does not open fully gently open with your hand After taking out the CD be sure to close the FLIP DOWN PANEL If a CD 12 cm is left in the ejected position for 15 seconds the CD is automatically reloaded Auto reload 3 CDs 8 cm are not auto reloaded
10. the display 2 To cancel the scan play press SCN button again SCN goes off from the display and the current track continues to play a Disc scan play The disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer This function continues automatically until it is canceled The disc scan play is useful when you want to select a desired CD 1 Press and hold SCN button 5 for 1 second or longer DISC and SCN light in the dis play and the disc scan play starts 2 To cancel the disc scan play press SCN but ton 5 again DISC and SCN go off from the display and the current track continues to play Repeat play The repeat play continuously plays the current track This function continues automatically until it is canceled 1 Press RPT button 6 RPT lights in the dis play and the current track is repeated 2 To cancel the repeat play press RPT button again RPT goes off from the display and normal play resumes o 18 RDX655Dz Disc repeat play After all the tracks on the current disc have been played the disc repeat play automatically replays the current disc over from the first track This function continues automatically until it is canceled 1 Press and hold RPT button 6 for 1 second or longer DISC and RPT
11. 1998 11 S C Clarion Co Ltd All Rights Reserved Copyright O 1998 Clarion Co Ltd Printed in China Imprim en Chine Inpreso en China PE 2190B 280 7250 00 O e z Clarion a Manual de instrucciones RDX655Dz AMFMCDPLAYER WITHCDIMDCHANGER CONTROL LECTEURCDAMFMAVEC COMMANDE DE CHANGEURCD MD RADIO DE AMFMY REPRODUCTORDEDISCOS COMPACTOSCONCONTROL DE CAMBIADOR A ae T A eii gt E A A eee ee a k te tF be A AA ky k E li ti Hi 1 SS J E S E al Ts i i z a E ts ste EAS s 5 T z 2 Ls i Sg Thank you for purchasing the Clarion RDX655Dz Please read this owner s manual in its entirety before operating this equipment After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual This manual includes the operating procedures of the CD changer MD changer and TV tuner con nected via the CeNET cable The CD changer MD changer and TV tuner have their own manuals but no explanations for operating them are described Contents TE A EEATURES o AE AE AAE a ete esta Ns a eae A E bt teenie tees Asal 2 2 PRECAUTIONS iienaa ta eed tei tio 3 Handling Compact DISCS c c
12. 21 9 TROUBLESHOOTING Ml Problem Power does not turn on No sound is produced Fuse is blown Measure Replace with a fuse of the same amperage If the fuse blows again consult your store of purchase Incorrect wiring Consult your store of purchase No sound output when operating the unit with amplifiers or power antenna attached Power antenna lead is shorted to ground or excessive current is required for remote on the amplifiers or power antenna 1 Turn the unit off 2 Remove all wires attached to the power antenna lead Check each wire for a possible short to ground using an ohm meter Turn the unit back on Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote on voltage excessive current required Nothing happens when buttons are pressed Display is not accurate The microprocessor has malfunctioned due to noise etc Turn off the power then press the OPEN button and remove the DCP Press the reset button for about 2 seconds with a thin rod N NN NS SS Reset button DCP or source unit connectors are dirty Wipe the dirt off with a soft cloth moistened with cleaning alcohol 22 Compact disc cannot be loaded Another compact disc is already loaded Eject the compact disc before loading the new one
13. 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exists to store individual radio sta tions in memory Pressing the corresponding pre set button recalls the stored radio frequency au tomatically 1 Press BND button 12 and select the desired band FM or AM 2 Press the corresponding Preset button 9 to recall the stored station Press and hold one of the Preset buttons 9 for 2 seconds or longer to store that station into preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current station into preset memory Auto store Auto store is a function for storing up to 6 sta tions that are automatically tuned in sequentially If 6 stations cannot be received a previously stored station remains unoverwritten at the memory position 1 Press BND button 12 and select the desired band FM or AM 2 Press and hold AS button 5 for 2 seconds or longer The stations with good reception are stored automatically to the preset buttons Preset scan Preset scan receives the stations stored in pre set memory in order This function is useful when searching for a desired station in memory 1 Press PS button 5 2 When a desired station is tuned in press PS button 5 again to continue receiving that sta ti
14. AC tht Sub title display 103 aA 5D a ALND nI L TT TI E IM Ii L ILLL 4 Clock display lt 103 aAa ED a UNS MUY CEZ CI F 4 yA C LY y Main display Once selected the preferred display becomes the display default When a function adjustment such as volume is made the screen will mo mentarily switch to that function s display then revert back to the preferred display several seconds after the adjustment Basic Operations x When you have entered a title in a CD it ap pears in the sub display If you have not en tered a title NO TITLE appears in the title display instead For information on how to en ter a title refer to the subsection Entering titles in the Other Handy Functions Setting the Z enhancer This unit comes with 3 types of sound tone effects stored in memory Select the one you prefer x The factory default setting is OFF Each time you press Z EHCR button 8 the tone effect changes in the following order Z ENHANCER 1 3 Z ENHANCER 2 3 Z ENHANCER 3 3 OFF 3 Z ENHANCER 1 Z ENHANCER 1 bass emphasized Z ENHANCER 2 treble emphasized Z ENHANCER 3 bass and treble emphasized OFF no sound effect Adjusting the tone Press A M button 13 and select the item to adjust Each time you press A M button 13 the item changes in the following order When Z
15. Be sure to remove it when ejected Notes If you force a CD into before auto reloading this can damage the CD e DISC CHK in the display shows you a CD is left in the unit Be sure to press Eject button 17 and remove it in this case Selecting a track O Track up 1 Press the right side of SEARCH button 14 to move ahead to the beginning of the next track 2 Each time you press the right side of SEARCH button 14 the track advances ahead to the beginning of the next track O Track down 1 Press the left side of SEARCH button 14 to move back to the beginning of the current track 2 Press the left side of SEARCH button 14 twice to move to the beginning of the previous track Fast forward fast backward O Fast forward Press and hold the right side of SEARCH button 14 for 1 second or longer O Fast backward Press and hold the left side of SEARCH button 14 for 1 second or longer Top function The top function resets the CD player to the first track of the disc Press TOP button 12 to play the first track track No 1 on the disc CD Operations Scan play The scan play locates and plays the first 10 sec onds of each track on a disc automatically This function continues on the disc until it is canceled The scan play is useful when you want to select a desired track 1 Press SCN button 5 to start track
16. Level Output with Fader Control 160W 40W x 4 Maximum Power Output RDX655Dz 6 REMOTE CONTROL Receiver for remote control unit Remote control unit va VOLUME lt gt SEARCH Operating range 30 in all directions Signal transmitter 26 MUTE ISR 25D amp D l SCN F Inserting the Batteries 1 Turn the remote control unit over then slide the rear cover in the direction of the arrow 2 Insert the AA UM 3 1 5V batteries that came with the remote control unit facing in the di rections shown in the figure then close the rear cover Notes Using batteries improperly can cause them to ex plode Take note of the following points e When replacing batteries replace both batteries with new ones Do not short circuit disassemble or heat batteries Do not dispose of batteries into fire or water e Dispose of spent batteries properly 8 RDX655Dz AA UM 3 1 5V Batteries Rear cover Rear side x 2 PRECAUTIONS 1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the play
17. PANEL be careful not to catch your fingers They could be injured 1 Always use the RDX655Dz with the FLIP DOWN PANEL closed 2 Do not force operations or use this device abnormally when opening or closing the FLIP DOWN PANEL 3 Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open 4 When closing the FLIP DOWN PANEL do not press OPEN button 1 5 Strong impacts to the operating or display section can cause damage or deformation 6 Ifthe FLIP DOWN PANEL does not open fully gently open it with your hand Be sure to unfold and read the next page Veuillez d plier et vous r f rer a la page suivante Cerci rese de desplegar y de leer la p gina siguiente A RDX655Dz 3 CONTROLS LES COMMANDES CONTROLES Source unit Appareil pilote Unidad fuente With the FLIP DOWN PANEL opened Ouverture du PANNEAU RABATTABLE Apertura del PANEL ABATIBLE z al Wit WZ ZARAR o IAN Note Be sure to unfold this page and refer to the front diagrams as you read each chapter Remarque Veuillez d plier cette page et vous r f rer aux sch mas quand vous lisez chaque chapitre Nota Cuando lea los capitulos despliegue
18. R button 3 for 1 sec ond or longer to turn off the power for the unit Note e System check The first time this unit is turned on after the wire connections are completed it must be checked what equipment is connected When the power is turned on SYSTEM CHCK appears in the dis play so press POWER button 3 The system check starts within the unit When the system check is complete the power is turned off so press POWER button 3 again N w Selecting a mode 1 Press FNC button 3 to change the mode of operation Each time you press FNC button 3 the mode of operation changes in the following order N 10 RDX655Dz Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold Radio mode CD mode 3 CD changer mode gt MD changer mode gt TV mode gt Radio mode External equipment not connected with CeNET is not displayed Adjusting the volume Turning the Rotary knob 15 clockwise increases the volume turning it counterclockwise de creases the volume The volume level is from 0 minimum to 33 maxi mum Switching the display Press DISP button 10 to select the desired display Each time you press DISP button 10 the display switches in the following order Main display UU ATA ED tie KA LUN hz gt E 4 rica ort eh l
19. Sound skips or is noisy Compact disc is dirty Clean the compact disc with a soft cloth Compact disc is heavily scratched or warped Replace with a compact disc with no scratches Sound is bad directly after power is turned on RDX655Dz Water droplets may form on the internal lens when the car is parked in a humid place Let dry for about 1 hour with the power on 10 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem a Error Display Cause Measure ERROR 2 ACD is caught inside the CD deck and is not ejected This is a failure of CD deck s mechanism and consult your store of purchase ERROR 3 ACD cannot be played due to scratches etc Replace with a non scratched non warped disc ERROR 6 ACD is loaded upside down inside the CD deck and does not play Eject the disc then reload it properly ERROR 2 ACD inside the CD changer is not loaded This is a failure of CD changer s mecha nism and consult your store of purchase ERROR 3 ACD inside the CD changer cannot be played due to scratches etc Replace with a non scratched non warped disc b o dD G 3 a S ERROR 6 A CD inside the CD changer cannot be played because it is loaded upside down Eject the disc then reload it properly ERROR H Displayed when the temperature in th
20. VED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUB CHAPTER J APPLICABLE AT DATE OF MANUFACTURE CLARION CO LTD 50 KAMITODA TODA SHI SAITAMA KEN JAPAN MANUFACTURED SERIAL No 286 Clarion Co Ltd PE MADE INE ACAUTION USE OF CONTROLS ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RE SULT IN HAZARDOUS RADIATION EXPO SURE THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL CHANGES OR MODIFICATIONS NOT EX PRESSLY APPROVED BY THE MANUFAC TURER FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT INFORMATION FOR USERS CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANU FACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL E Bottom View of Source Unit RDX655Dz 3 Handling Compact Discs Use only compact discs bearing the S mark Do not play heart shaped octagonal or other specially shaped compact discs Handling e New discs may have some roughness around the edges If such discs are used the player may not work or the sound may skip Use a ball point pen or the like to remove any rough ness from the edge of the disc Ball point pen Roughness Never stick labels on the surface of the com pact disc or mark the surf
21. ace with a pencil or pen Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks Ifyou try to play such a compact disc you may not be able to get it back out of the CD player or it may damage the CD player Do not use compact discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or dam age Flip Down Panel To remove a compact disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available CD protec tion sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the internal mechanism Storage Do not expose compact discs to direct sun light or any heat source Do not expose compact discs to excess hu midity or dust Do not expose compact discs to direct heat from heaters Cleaning To remove fingermarks and dust use a soft cloth and wipe in a straight line from the cen ter of the compact disc to the circumference Do not use any solvents such as commercially available cleaners anti static spray or thinner to clean compact discs After using special compact disc cleaner let the compact disc dry off well before playing it The RDX655Dz uses a flip down structure that makes possible large size displays 44 CAUTION When opening and closing the FLIP DOWN
22. and the current track continues to play a Disc scan play The disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected MD changer This function continues automatically until it is canceled The disc scan play is useful when you want to select a desired MD 1 Press and hold SCN button 5 for 1 second or longer DISC and SCN light in the dis play and the disc scan play starts 2 To cancel the disc scan play press and hold SCN button 5 again DISC and SCN go off from the display and the current track con tinues to play RDX655Dz 19 MD Changer Operations Repeat play The repeat play continuously plays the current track This function continues automatically until it is canceled 1 Press RPT button 6 RPT lights in the dis play and the current track is repeated 2 To cancel the repeat play press RPT button again RPT goes off from the display and normal play resumes o Disc repeat play After all the tracks on the current disc have been played the disc repeat play automatically replays the current disc over from the first track This function continues automatically until it is canceled 1 Press and hold RPT button 6 for 1 second or longer DISC and RPT light in the dis play and the disc repeat play starts 2 To ca
23. ation 1 to 6 50000 Disc number indication 1 to 12 The disc numbers corresponding to the discs in the CD or MD changer light 6 RDX655Dz Long title indication Operation status indication x The frequency play time clock etc are dis played RDM random indication RPT repeat indication SCN scan indication BAND indication DISC TITLE indication TRACK indication Removing the DCP 1 Hold down POWER button 3 for 1 second or longer to turn off the power 2 Deeply push in OPEN button 1 to unlock the FLIP DOWN PANEL If the FLIP DOWN PANEL does not open fully gently open it with your hand Be sure to close the HOLD FLAP for safety when removing the DCP Attaching the DCP 1 Insert the right side of the DCP into the source unit 2 Insert the left side of the DCP into the source unit The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks If the FLIP DOWN PANEL is kept open the DCP may drop due to vibration of the car This results in damage to the DCP So close the FLIP DOWN PANEL or remove the DCP to store into the case The connector connecting the source unit and the DCP is an extremely important part Be careful not to damage it by pressing on it with fingernails screwdrivers etc Note If the DCP is dirty wipe off the dirt with a soft dry cloth only RDX655Dz 7 Functions
24. e MD changer is too high and playback has been stopped automatically Lower the surrounding temperature and wait for a while to cool off MD changer ERROR 2 An MD inside the MD changer is not loaded This is a failure of MD changer s mecha nism and consult your store of purchase ERROR 3 MD changer An MD inside the MD changer cannot be played due to scratches etc Replace with a non scratched non warped disc ERROR 6 An MD inside the MD changer cannot be played because it is loaded upside down Eject the disc then reload it properly Displayed when a non recorded MD is loaded in the MD changer Load a pre recorded MD in the MD changer If an error display other than the ones described above appears press the reset button If the problem persists turn off the power and consult your store of purchase RDX655Dz 23 11 SPECIFICATIONS FM Tuner Frequency Range 87 9 MHz to 107 9 MHz Usable Sensitivity 11 dBf 50dB Quieting Sensitivity 17 dBf Alternate Channel Selectivity 75 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 530 kHz to 1710 kHz Usable Sensitivity 25 uV CD Player System Compact disc digital audio system Usable Discs Compact disc Frequency Response 1 dB 10 Hz to 20 kHz Signal to Noise Ratio 1 kHz 100 dB Dynamic Range 1 kHz 95 dB Harmonic Distortion 0 01
25. ecceceeceeeceeeeeeeeeeceaeeeeaeeeeaeeesaeeeeaeeseaeeseaeeseacescaeeseaeessaeeseaeeeseaneteaes 4 RIP DOWNIP ANG castes O RT 4 3 CONTROLS coto Ra 5 4 NOMENCLATURE 00 es 6 Names BUIN iii doit ia 6 Display MOMS iin cstscisevvenacecie cc raae aai aE ea iao AAA IR 6 Bs DOP ee ate akties A A fssyaceieniesisahsnd dst ae dst ae cusabendnharadsuaeat NN 7 6 REMOTE CONTROL 0 concession ica 8 Inserting the BASS vidad AA A A id 8 Functions of Remote Control Unit Buttons oooonconnoncncnconoccnoccnnncornnannnnna noo nanc rra r cnn crac narco 9 To OPERATIONS ie a aieeaa a ekaia iee kaaet Eae cio ikapa Aay a ad eben tices 10 Basic Operations 10 Radio Operations 12 CD Operations 14 Other Handy Functions 15 8 OPERATIONS OF ACCESSORIES 17 CD Changer Operations 17 MD Changer Operations 19 TV Operations 20 9 TROUBLESHOOTING 22 10 ERROR DISPLAYS we 23 11 SPECIFICATIONS ccoo ie 24 1 FEATURES 2 Rotary Encoder Volume Control with Illuminated Search Key Touch n GO Flip Down Detachable Face Capability to Read CD TEXT Data from Clarion Compatible CD Changer Z Enhancer with 3 Adjustment Modes CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling MAGI TUNE FM Reception System 8 Times Oversampling Digital Filter and Dual 1 Bit D A Converters Zero Bit Detector Mute Circuit 4V 4 Channel RCA Line
26. er do not use the player for about one hour The condensation will disappear natu rally allowing normal operation 2 Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip 3 This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit or lubricate the rotating parts This equipment has been tested and found to comply with the limits for a Class B digital de vice pursuant to Part 15 of the FCC Rules These limits are designed to provide reason able protection against harmful interference in a residential installation This equipment generates uses and can radi ate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio com munications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interfer ence to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to consult the dealer or an experienced radio TV technician for help Clarion 12V GROUND AM 530 1710kHz FM 87 9 107 9 MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDI TIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER ENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTER FERENCE RECEI
27. ing a track O Track up 1 Press the right side of SEARCH button 14 to move ahead to the beginning of the next track 2 Each time you press the right side of SEARCH button 14 the track advances ahead to the beginning of the next track O Track down 1 Press the left side of SEARCH button 14 to move back to the beginning of the current track 2 Press the left side of SEARCH button 14 twice to move to the beginning of the previous track Fast forward fast backward O Fast forward Press and hold the right side of SEARCH button 14 for 1 second or longer O Fast backward Press and hold the left side of SEARCH button 14 for 1 second or longer Top function The top function plays from the first track track No 1 of the disc Press the Direct button 9 1 to 6 with the same number as the MD playing If an MD is not loaded in a slot of the MD changer pressing the Direct button 9 corresponding to its disc number is invalid Scan play The scan play locates and plays the first 10 seconds of each track on a disc automatically This function continues on the disc until it is canceled The scan play is useful when you want to select a desired track 1 Press SCN button 5 to start track scanning SCN lights in the display 2 To cancel the scan play press SCN button again SCN goes off from the display
28. isplay 2 Press and hold LD button 13 for 1 second or longer to turn off the loudness effect LD goes off in the display 12 RDX655Dz Radio Operations FM reception For enhanced FM performance the MAGI TUNE tuner includes signal actuated stereo control and Multipath noise reduction circuits Changing the reception area This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM When using it outside the USA the frequency reception range can be switched to the intervals below O Setting the reception area 1 Press BND button 12 and select the desired radio band FM or AM 2 While pressing RDM button 7 each time you press and hold the number 1 of the Preset buttons 9 for 2 seconds or longer the recep tion area switches from inside the USA to out side the USA or from outside the USA to in side the USA Any station preset memories are lost when the reception area is changed Listening to the radio 1 Press FNC button 3 and select the radio mode 2 Press BND button 12 and select the radio band Each time the button is pressed the radio reception band changes in the following order FM1 3 FM2 3 FM3 3 AM 23 FM1 3 Press the right or left side of SEARCH button 14 to tune in the desired station Tuning There are 3 types of tuning mode available seek tuning manua
29. l tuning and preset tuning Seek tuning 1 Press BND button 12 and select the desired band FM or AM If MANU is lit in the display press and hold BND button 12 for 1 second or longer MANU in the display goes off and seek tuning is now available 2 Press the right or left side of SEARCH button 14 to automatically seek a station When the right side of SEARCH button 14 is pressed the station is sought in the direction of higher frequencies if the left side of SEARCH button 14 is pressed the station is sought in the direction of lower frequencies Radio Operations Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the fre quency changes one step ata time In quick tun ing mode you can quickly tune the desired fre quency 1 Press BND button 12 and select the desired band FM or AM If MANU is not lit in the display press and hold BND button 12 for 1 second or longer MANU lights in the display and manual tun ing is now available 2 Tune into a station O Quick tuning Press and hold the right or left side of SEARCH button 14 for 1 second or longer to tune in a station O Step tuning Press the right or left side of SEARCH button 14 to manually tune in a station Recalling a preset station A total of
30. ncel the disc repeat play press and hold RPT button 6 again DISC and RPT go off from the display and normal play resumes on the current track Random play The random play selects and plays individual tracks on the disc in no particular order This function continues automatically until it is canceled 1 Press RDM button 7 RDM lights in the dis play and the random play begins 2 To cancel the random play press RDM but ton 7 again RDM goes off from the display and normal play resumes Disc random play The disc random play selects and plays individual tracks or discs automatically in no particular order This function continues automatically until it is canceled 1 Press and hold RDM button 7 for 1 second or longer DISC and RDM light in the dis play and the disc random play starts 2 To cancel the disc random play press and hold RDM button 7 again DISC and RDM go off from the display and normal play resumes from the current track 20 RDX655Dz TV Operations TV tuner functions When an optional TV tuner is connected through the CeNET cable this unit controls all TV tuner functions To watch TV requires a TV tuner and monitor Watching a TV 1 Press FNC button 3 and select the TV mode 2 Press BND button 12 to select the desired TV band TV1 or TV2 Each time the but
31. on Note Be careful not to press and hold PS button 5 for 2 seconds or longer otherwise the auto store function engages and the unit starts storing Stations Instant station recall ISR Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button The ISR function even operates with the unit in other modes ISR memory 1 Select the station that you wish to store in ISR memory 2 Press and hold ISR button 11 for 2 seconds or longer O Recalling a station with ISR In any mode press ISR button 11 to turn on the radio function and tune the selected radio sta tion ISR appears in the display Press ISR but ton 11 again to return to the previous mode RDX655Dz 13 CD Operations Loading a CD 1 Press OPEN button 1 to access the CD in sertion slot behind the FLIP DOWN PANEL 2 Insert a CD into the center of the insertion slot with the label side facing up The CD plays automatically after loading Notes Never insert foreign objects into the CD insertion slot e If the CD is not inserted easily there may be another CD in the mechanism or the unit may require service e Discs not bearing the disc mark and CD ROMs cannot be played by this unit Loading 3 8 cm compact discs x No adapter is required to play a 3 CD Insert the 3 CD into
32. rong stations are stored into memory 1 Press BND button 12 and select the desired TV band TV1 or TV2 2 Press and hold AS button 5 for 2 seconds or longer The stations with good reception are automatically stored to the Preset buttons 9 Preset scan Preset scan allows the user to view each preset position before it automatically advances to the next preset This function is useful for searching for desired TV station in memory 1 Press PS button 5 2 When the desired station is found press PS button 5 again to remain tuned to that station Note Do not press and hold PS button 5 for 2 seconds or longer Doing so will trigger the auto store function and start storing stations into memory Setting the TV diver You can change the reception setting for the TV antenna connected to the TV tuner 1 Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display 2 Press the right or left side of SEARCH button 14 to select TV DIVER 3 Press ENT button 4 Turn the Rotary knob 15 clockwise to set to ON or counterclockwise to set to OFF ON Sets reception emphasizing the visual OFF Sets the diver setting to OFF 5 Press ENT button 6 Press ADJ button 4 to return to the previous mode N N RDX655Dz
33. scanning SCN lights in the display 2 To cancel the scan play press SCN button 5 again SCN goes off from the display and the current track continues to play Repeat play The repeat play continuously plays the current track This function continues automatically until it is canceled 1 Press RPT button 6 RPT lights in the dis play and the current track is repeated 2 To cancel the repeat play press RPT button 6 again RPT goes off from the display and normal play resumes Random play The random play selects and plays individual tracks on a disc in no particular order This function con tinues automatically until it is canceled 1 Press RDM button 7 RDM lights in the dis play an individual track is selected randomly and play begins 2 To cancel the random play press RDM but ton 7 again RDM goes off from the display and normal play resumes Other Handy Functions Setting the clock 1 Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display 2 Press the right or left side of SEARCH button 14 to select CLOCK 3 Press ENT button 2 4 Press the right or left side of SEARCH button 14 to select the hour or the minute 5 Turn the Rotary knob 15 clockwise or counterclockwise to set the correct time x The clock is displayed in 12 ho
34. t the desired band TV1 or TV2 x If MANU is not lit in the display press and hold BND button 12 for 1 second or longer MANU lights in the display and manual tun ing is now available 2 Tune into a station O Quick tuning Press and hold the right or left side of SEARCH button 14 for 1 second or longer to tune in a station O Step tuning Press the right or left side of SEARCH button 14 to manually tune in a station Recalling a preset station A total of 12 TV stations can be stored 6 TV1 and 6 TV2 This allows you to select your favorite TV stations and store them in memory for later recall 1 Press BND button 12 and select the desired TV band TV1 or TV2 2 To recall a stored TV station press the de sired Preset button 9 to select that station Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current sta tion into the preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current station to that preset memory Auto store Auto store selects 6 TV stations automatically and stores each one into a preset memory If there are not 6 stations with good reception stations previously stored in memory remain and only the st
35. ta for CD text CDs and user titles input with this unit 1 Press DISP button 10 to display the title 2 Each time you press and hold DISP button 10 for 1 second or longer the title display changes in the following order User title disc gt CD text title disc gt CD text title track gt user title disc Note If the CD playing is not a CD text CD or no user title has been input NO TTL appears in the dis play O Scrolling a CD text title When a CD text title is longer than 11 characters you can scroll the display as follows 1 Display the CD text title disc or track 2 Press TITLE button 4 The title scrolls Selecting a CD Each of the Direct button 9 corresponds to a disc loaded into the magazine Selecting a disc from 1 to 6 Press the corresponding Direct button 9 1 to 6 to select the desired disc Selecting a disc from 7 to 12 only when a 12 disc CD changer is used Press and hold the corresponding Direct button 7 to 12 for 1 second or longer to select the desired disc If a CD is not loaded in a slot of the magazine pressing the Direct button 9 corresponding to its disc number is invalid o Selecting a track O Track up 1 Press the right side of SEARCH button 14 to move ahead to the beginning of the next track 2 Each time you press the right side of SEARCH but
36. tary knob 15 clockwise empha sizes the sound from the front speakers turn ing it counterclockwise emphasizes the sound from the rear speakers x The factory default setting is 0 Adjustment range F12 to R12 3 When the adjustment is complete press A M button 13 several times until the function mode is reached Adjusting the Z enhancer 1 Press Z EHCR button 8 and select the Z enhancer mode 1 to 3 to adjust 2 Press A M button 13 and select Z EHCR 3 Turning the Rotary knob 15 clockwise adjusts in the direction turning it counterclockwise adjusts in the direction x When Z enhancer 1 is selected you can adjust the bass in the range of 2 x When Z enhancer 2 is selected you can adjust the treble in the range of 2 x When Z enhancer 3 is selected you can adjust the bass and treble in the range of 2 4 When the adjustment is complete press A M button 13 several times until the function mode is reached RDX655Dz 11 Basic Operations Turning on off the loudness The loudness effect emphasizes the bass and treble to create a natural sound tone When you are listening to music at a low volume it is rec ommended to use the loudness effect 1 Press and hold LD button 13 for 1 second or longer to turn on the loudness effect When the loudness effect is turned on LD lights in the d
37. tment selection display Press the right or left side of SEARCH button 14 to select MESSAGE N message display to ON turn it counterclock wise to set the message display to OFF Pressing ENT button 2 returns to the adjust ment selection display Press ADJ button 4 to return to the previous mode 8 OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable this unit controls all the CD changer functions This unit can control a total of 2 changers MD and or CD Press FNC button 3 and select the CD changer mode to start play If 2 CD changers are connected press FNC button 3 to select the CD changer for play If NO MAG appears in the display insert the magazine into the CD changer LOADING ap pears in the display while the player loads checks the magazine x If NO DISC appears in the display eject the magazine and insert discs into each slot Then reinsert the magazine back into the CD changer E ACAUTION CD ROM discs cannot be played in the CD changer Pausing play 1 Press Play pause button 2 to pause play PAUS appears in the display 2 To resume play press Play pause button again N Displaying CD titles This unit can display title da
38. ton 14 the track advances ahead to the beginning of the next track O Track down 1 Press the left side of SEARCH button 14 to move back to the beginning of the current track 2 Press the left side of SEARCH button 14 twice to move to the beginning of the previous track Fast forward fast backward O Fast forward Press and hold the right side of SEARCH button 14 for 1 second or longer O Fast backward Press and hold the left side of SEARCH button 14 for 1 second or longer RDX655Dz 17 CD Changer Operations Top function The top function plays from the first track track No 1 of the disc O When playing a disc 1 to 6 Press the Direct button 9 1 to 6 with the same number as the CD playing When playing a disc 7 to 12 only when a 12 disc CD changer is used Press and hold for 1 second or longer the Direct button 9 7 to 12 with the same number as the CD playing If a CD is not loaded in a slot of the magazine pressing the Direct button 9 corresponding to its disc number is invalid Scan play The scan play locates and plays the first 10 seconds of each track on a disc automatically This function continues on the disc until it is canceled The scan play is useful when you want to select a desired track 1 Press SCN button 5 to start track scanning SCN lights in
39. ton is pressed the input selection toggles between TV1 and TV2 3 Press the right or left side of SEARCH button 14 to tune in the desired TV station Watching a video The TV tuner has a VTR input terminal to which 1 external device can be connected Connect a 12V video cassette player VCP or video cassette recorder VCR to the TV tuner input terminal 1 Press RDM button 7 to select VTR 2 To return to the TV broadcast press RDM button 7 Tuning There are 3 types of tuning mode available Seek tuning manual tuning and preset tuning Seek tuning 1 Press BND button 12 and select the desired TV band TV1 or TV2 If MANU is lit in the display press and hold BND button 12 for 1 second or longer MANU in the display goes off and seek tuning is now available 2 Press the right or left side of SEARCH button 14 to automatically seek a station Press the right side of SEARCH button 14 to automatically tune up the frequency band to the next available TV station press the left side to automatically tune down TV Operations Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the frequency changes one step at a time In quick tuning mode you can quickly tune the desired frequency 1 Press BND button 12 and selec
40. ur format 6 Press ENT button 2 to store the time into memory 7 Press ADJ button 4 to return to the previous mode Note e You cannot set the clock when it is displayed with only the ignition on If you drain or remove the car s battery or take out this unit the clock is reset While setting the clock if another button or operation is selected the clock set mode is canceled N Entering titles Titles up to 10 characters long can be stored in memory and displayed for radio stations and CDs The numbers of titles that can be entered for each mode are as follows Mode Number of titles Radio mode 30 titles CD mode 50 titles TV mode 15 titles CD changer mode Number of titles RDC655z connected 60 titles RDC655Tz connected 100 titles RDC1255z connected 50 titles 1 Press FNC button 3 to select the mode you want to enter a title radio CD CD changer or TV Titles cannot be entered for MDs with this unit 2 Select and play a CD or a CD in the CD changer or tune to an appropriate TV or radio station 3 Press DISP button 10 and display the sub title 4 Press TITLE button 4 TITL appears in the display and the cursor position flashes 5 Press the right or left side of SEARCH button 14 to move the cursor RDX655Dz 15 Other Handy Functions 6
Download Pdf Manuals
Related Search