Citizen ISO 9001 User's Manual
Contents
1. INSTRUCTION MANUAL Printer Contents Intended Use Safety Precautions Installation Operation Printing the Data of Connected Weighing Instrument Statistical Evaluation of the Data Settings Maintenance Specifications 14 16 Intended Use Model CPRO2 is a data printer designed to receive weighing data from a connected weighing instrument and to print it on plain paper roll width 57 5 mm Text and data are printed with up to 24 characters per line This data printer is equipped with a real time clock After the printer has been configured according to the required settings it is suitable for use in legal metrology In addition to recording individual weighing data the data printer can generate a statistical evaluation of weighing data All values transferred from an on line weighing instrument are stored The following can be computed printed out Number of weighing operations Mean value Variation coefficient Cumulative Standard deviation Minimum value weight Maximum value weight Difference between the maximum and minimum value weight Data is transferred either automatically or manually by pressing a key Safety Precautions Installing the Ink Ribbon Cassette o S To install the ink ribbon cassette refer to Maintenance When cleaning the data printer make sure that no liquid enters the printer Page No 15 housing use onl2. Remove the cassette Insert a new ink ribbon cassette from the top The cassette will lock into place If necessary turn the small tension wheel located on the left in the direction of the arrow until the ribbon is stretched taut in front of the paper To thread the paper refer to Changing the Paper Roll Lower the cover of the paper roll compartment to close it 15 Specifications Designation Dimensions Length Width Height Weight Operating temperature Storage temperature 16
3. at the end of the second line indicates whether menu settings can be changed C Change Settings can be changed L Locked Settings cannot be changed To change the settings enter the old password again Press button to confirm the settings or select the Pass code Press button to exit To set the Baud rate Press stat button to enter in the setting mode of Baud rate It gives the option for Baud Rate as 1200 2400 4800 9600 19200 Press button to select any one of them and the selected value will show sign EX 9600 Designation Display Setting option Print VARTEXTI S1 PRINT 0 no l yes VERTEXT on statistics printout Print VARTEXT2 S2 PRINT 0 no l yes VERTEXT on statistics printout Print number of S3 PRINT READ 0 no 1 yes measurements COUNT Print mean value S4 PRINT MEAN VALUE 0 no l yes Print variation coefficient S5 PRINT STD 0 no 1 yes RELATIVE Print sum of individual S6 PRINT 0 no yes values CUMMULATIVE Print standard deviation S7 PRINT STD 0 no yes DEVIATION Print minimum value S8 PRINT 0 no 1 yes MINIMUM Print maximum value S9 PRINT 0 no yes MAXIMUM Print difference between S10 PRINT 0 no yes maximum and minimum DIFFERENCE values Print date time S11 PRINT 0 no yes DATE TIME 10 Application Settings Program Vers 1 xx
4. C S1 Print TEXT1 ON S2 Print TEXT2 ON 3 Print n OFF S4 Print X OFF S5 Print srel OFF S Print Xx OFF S7 Print S OFF S8 Print Min OFF S9 Print Max OFF S10 Print diff OFF S11 Print date ON Interface Settings Program Vers 1 xx C Baud rate 1200 bd Parity Odd Handshake DTR CTS P1 Send CR LF ON P2 Print format Right P3 Decimal Char point P4 Num function ON P5 Inverse from OFF P Print mode Standard P7 Date Time ON P8 Print TEXT1 OFF P9 Print TEXT2 OFF C1 Time format 24h C2 Display Time HARD COPY OF THE STATISTICS MENU S To select the Statistics Applications menu hold down the key when you start the printer or hold down theL stat key for more than 5 seconds during printer operation To print the settings press the key To exit the Statistics Menu press the key Printing a Hard Copy of the Interface Settings S To select the Interface Settings for the Data Printer menu hold down the key when you start the printer or hold down the key for more than 5 seconds during printer operation To print the settings press the key gt You will obtain the readout shown on the left Example these are the factory settings S To exit the Interface Settings for the Data Printer menu press the key 11 DESIGNATION DISPLAY SETTING OPTION Passcode PASSCODE 100 9999 Data transmission baud BAUD RATE 1200 2400 4800 rate baud rate 9600 19200 P
5. arity PARITY Odd Even Space None RS 232C handshake RS232 HANDSHAKE 0 hardware 1 software MODE Print using lt CR LF gt PI PRINT USING CR LF 0 no 1 yes Print flush right left hand margin P2 PRINT FLUSH MARGIN 0 right 1 left Print P3 DECIMAL 0 decimal points 1 Decimal points commas COMMA commas Numbering function on off P4 NUMBERING 0 off 1 on FUNCTION Inverse printing P5 INVERT PRINT no inverse printing last digit inverse last 2 digits inverse last 3 digits inverse Manual automatic data transfer P6 TRANSFER DATA 0 manual indiv data transfer 1 automatic data transfer Date time when printer starts P7 TIME DATE PRINT 0 no 1 yes Print VARTEXTI P8 VARTEXTI 0 no 1 yes when printer starts PRINT Print VARTEXT2 P9 VARTEXT2 0 no 1 yes when printer starts PRINT Time display C1 TIME DISPLAY 12 24 hours FORMAT Date time display C2 DISPLAY RTC 0 date 1 time 12 Statistics Menu How to enter into Statistics Menu Press st button for 5 sec at stand by mode or Press stat button for 2 sec when printer is switched on Then printer will enter into setting mode of Statistics Menu Then with the help of cv Jand the value will increase and decrease respectively from S1 to S11 To set the Print Read Count Af
6. cal values can be configured in the Statistics Applications menu so that it will be printed or not printed Number of weighing operations n s3 Mean value x s4 Variation coefficient f srel s5 Sum ofthe individual values weights gt s6 Standard deviation m s7 Minimum value weight min s8 Maximum value weight max s9 Difference between the minimum diff s10 and the maximum value weight Set this to 1 if date is required atthe date s11 end of statistics readings NUM Numbering Each Value All individual values printed will be numbered if you set the Statistics Applications menu as follows Numbering function 1 p4 Factory setting 1 The symbol shown on the top right side will be displayed You can deactivate the numbering function during subsequent operation of the printer by pressing the key This is a very convenient feature for the statistical evaluation of a series of weights as you can consecutively place your samples on the weighing pan without having to remove them Data Transfer and Statistical Evaluation in the Manual Mode Required Printer Configuration You must set the following printer configuration in the Statistics Applications menu 01 123 6 g 02 117 8 g 03 119 1 g Data transfer manual 0 p5 Recording and Evaluating Data Press the stat key to clear the printer memory prior to initial data t
7. hen with the help of NN and cn the value will increase and decrease respectively After pressing the button the cursor will move to year Then with the help of NN jand r cN the value will increase and decrease respectively After pressing the button the cursor will move to time hour Then with the help of NN and r cn the value will increase and decrease respectively After pressing the button the cursor will move to time minute Then with the help of NN and 4 cN the value will increase and decrease respectively To set the data of date and time press button once Data Menu How to enter into Data Menu Press PRINT button for 5 sec at stand by mode or Press button for 2 sec when printer is switched on Then printer will enter into setting mode of Data menu Then with the help M eer Dani CSS the value will increase and decrease respectively from Pass code to C2 To set the Pass code After pressing the Stet_ button the cursor will display Then with the help of r cv and N _ the value will increase and decrease respectively from 01 to 99 the first two digits will be selected After pressing the 5t t button the cursor will display XX Then with the help of r cn and the value will increase and decrease respectively from 01 to 99 the next two digits will be selected NOTE The letter
8. ransfer n 12 gt Any previous values remaining will be evaluated first x wee then you will obtain a printout of the statistics srel 3 57 X The statistics will be deleted 2x 1205 49 min 96 0 g max 103 2 g Place the first sample on the weighing pan Diff 72g 12 AUG 2008 16 02 11 Print should come from Weighing Scale gt The value will be printed if the printer has been configured accordingly gt The count of the transferred values will be displayed Remove the sample from the weighing pan 01 123 6 g ns T Hei g Place the next sample on the weighing pan and g press print button key Recording and Evaluating Data Press the key to clear the statistics memory prior to initial data transfer gt The value will be printed out To record consecutive weighing operations follow the steps mentioned above Then Press the key to obtain a printout of the statistics The values as shown on the left are automatically computed and printed out Once the data has been printed out the statistics memory will be cleared Settings Date How to enter into date and time menu Press button for 5 sec at stand by mode or Press button for 2 sec when printer is switched on Then printer will enter into setting mode of date Then with the help off n and s cw the value will increase and decrease respectively After pressing the Stat button the cursor will move to month T
9. s the numbering counter Turn on the weighing instrument 4 STAT Statistical Evaluation To enter in the stat mode 5 Date Date Print the Date and Time 6 Print Print the values or reads them into the statistics memory and gt To Power the Printer Plug in the DC Adapter Power Supply prints the data of the connected weighing instrument gt Printer will print the following Data with Current Date amp Time CITIZEN SCALE MUMBAI 097 STATISTIC PRINTER 3 JAN 2008 19 42 59 12 AUG 2008 10 25 38 01 123 4 g Printing the Data of the Connected Weighing Instrument If necessary print required blank lines line feed Press the key several times To print the date and time press the Date key gt The printout will be as shown on the left To print data press the PRINT key To reset the numbering function if necessary press the key To turn off the numbering function press the NN key Statistical Evaluation of the Data The printer s built in statistics program can process all values that are computed or weighed and transferred from an on line weighing instrument The number of values read into the statistics memory is also displayed To print the statistics press the key Once the data has been printed out the statistics memory will be Cleared Configuring the Data Printer for Statistical Evaluation Any of the following statisti
10. ter pressing the button the cursor will display previous setting of the machine It gives the option for Print Read Count 0 NO 1 YES Press button to select any one of them and the selected value will show sign EX 0 NO 13 Maintenance Changing the Paper Roll To operate your data printer the paper rolls must have the following specifications Standard paper roll Wood free paper 60 g Width 57 5 0 5 mm Diameter 65 mm max Core diameter 8 mm min To open the paper roll compartment lift the cover Remove the old roll core Place a new paper roll on a flat surface The beginning of the paper must be on the bottom and facing you Using your other hand thread the paper through the slot underneath the ink ribbon To transport the paper through the ink ribbon cassette press the key several times The paper will be threaded into then out of the ink ribbon cassette 14 Release the roll holders on both sides To close the paper roll compartment lower the cover Changing the Ink Ribbon Cassette To operate your data printer you must use a black ink ribbon cassette Lift the cover of the paper roll compartment To remove the paper from the ink ribbon cassette turn the paper roll opposite to the paper feed direction Press down on the right side of the cassette The left side of the cassette will lift up
11. y a moist cloth to wipe down the housing Inserting the Paper Roll Insert the paper roll as described in Maintenance Installation Page No 14 Equipment Supplied Setting the Date and Time Forinstructions on setting the date and time The followi t lied ee please refer to Settings on Page No 8 Interface cable for connecting the printer to a weighing instrument Black ink ribbon cassette is installed Paper roll Power Supply Adapter Plug the original company DC adapter into an electrical outlet Insert the plug into the jack on the right of the printer s rear panel You cannot thread the paper roll until the printer has been turnedion Connect the printer and the weighing instrument by following the steps mentioned in the previous section Connecting the Data Printer to a Weighing Instrument Operations Connect the interface cable to the printer and the The data printer has 6 function keys for operation J em weighing instrument you are using 1 LF Line Feed Press the LF key to advance the paper by one blank line 2 N N Numbering Function ON OFF This is only possible if the numbering function Turning On the Weighing Instrument and the Printer p4 in the menu Interface Settings for the Data Printer has been activated To power the weighing instrument plug in the DC adapter power supply 3 CN Clear Number This key reset
Download Pdf Manuals
Related Search