Chicago Electric 42417 User's Manual
Contents
1. Part Description Quantity Part Description Quantity 1 ABS Housing 1 8 Switch 1 2 Reflector Plastic 1 9 Battery 1 3 Bulb 1 10 Locking Trigger Hold 1 4 Glass 1 11 Trigger 1 5 Lamp Lid 1 12 Hanging Strap 1 6 Tripod Adapter 1 13 Power Adapter 1 7 Circuit Board 1 14 Car Adapter 1 Warning Battery Disposal The Spotlight is powered by a battery which will have a long life span When the battery is no longer functioning it should be removed from the Spotlight and properly recycled Many states require recycling Contact your local solid waste authority for information on recycling Before disposing of the battery wrap exposed terminals with heavy tape to prevent a shorting condition which could cause fire and or injury NEVER EXPOSE THE BATTERY TO HIGH HEAT OR FIRE BATTERY MAY EXPLODE UNDER THESE CONDITIONS 42417 REV 11 02 REV 05 05 Page 4 Assembly Diagram Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SN T cesa CCP EE a c PLEASE READ THE FOLLOWING CAREFULLY THEMANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKEANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY2. STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO 42417 Page 5
3. CHICAGO 3C YeijiteiPower Tools SPOTLIGHT 1 000 000 CANDLE POWER 1 p 3 3491 Mission Oaks Blvd Camarillo CA 9301 1 Copyright 2000 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product For future reference please complete the owner s record below Model Serial No Purchase Date SAVE THE RECEIPT WARRANTY AND THESE INSTRUCTIONS It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly Technical Specifications Tool Name Spotlight 1 000 000 Candle Power Item Number 42417 Housing Diameter 6 Battery 12 VDC Lens Adapter 5 Lens Construction 3 16 Glass Candle Power 1 000 000 Light Source Quartz Halogen Bulb Handle 4 Pistol Grip Trigger Squeeze Type with Trigger Hold Power Adapter 120 VAC 60 Hz 12 VDC Charger U L Listed Car Adapter Lighter Type with 5 1 2 Cord Tool Weight 3 LBS i IMPORTANT SAFETY INSTRUCTIONS i READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that
4. COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTOTHIS PRODUCT BUT MUST BE SUPPLIED BY THE OPERATOR The Operator PLEASE REMEMBER Never look directly into the Spotlight Avoid touching the Lens as it may become hot during operation Do not dissassemble the Battery or remove any parts from the Battery and surrounding connections Do not allow the Spotlight to be exposed to fire or high heat as this may result in an explosion 42417 Page 2 Grounding Voltage Warning Common household current is 110 120 volts As long as the outlet used with the tool is rated from 110 120V there will be no complications using it with household receptacles Plug the tool into a 110 120V properly grounded outlet protected by a 15 amp dual element time delay or circuit breaker NEVER try to plug a 110 120V tool into a 220 240V circuit or serious complications and possible injury to the operator may occur The plugs have different shapes to prevent this Assembly Your Spotlight comes completely assembled Operation To assist you with operating your Spotlight please refer to Figure 1 on page 4 and to the Parts List and Assembly Diagram located on pages 4 and 5 Charging Your Spotlight Battery 9 is rechargeable To recharge your Battery 9 your Spotlight comes with a Power Adapter 13 otep 1 Insert the cord end of the Power Adapter 13 into the outlet on the back of the Spotlight Plug the Power Adapter 13 into the elec
5. on properly if the Car Adapter is plugged into the Spotlight Note When charging the Spotlight only place the Spotlight on a non flammable surface Tripod Adapter otep 1 Your Spotlight can be screwed onto a tripod or workstand neither is included At the bottom of the Trigger Grip Handle there is Tripod Adapter 6 Screw the tripod or workstand into this Tripod Adapter 42417 Rev 11 00 REV 10 02 REV 11 02 REV 05 03 REV 06 03 Page 3 On Off with Locking Trigger Hold Your Spotlight is equipped with a Trigger Hold to allow you to have the Spotlight on while leaving your hands free for work Step 1 To turn on your Spotlight press down on the Trigger 11 Pressing down on the Trigger 11 will engage the Locking Trigger Hold 10 see Figure 1 Note Never leave Spotlight unattended with the Locking Trigger Hold left on otep 2 To release the Trigger Hold 10 push in on the left side of the Locking Trigger Hold button 10 see Figure 1 IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE DO NOT OPERATE THE TOOL ABS Housing 1 Lamp Lid 5 Car Adapter 14 Locking Trigger Hold 10 Trigger 11 Hanging Strap 12 Tripod Adapter 6 ae Figure 1 Unpacking UNPACK AND CHECK CONTENTS When unpacking your Spotlight 1 000 000 Candle Power check to make sure the following parts are included If any parts are missing or broken please call HARBOR FREIGHT TOOLS at 1 800 444 3353 Parts Listing
6. trical outlet otep 2 The red light indicates the unit is properly plugged in Leave the Power Adapter 13 plugged in for approximately 12 to 14 hours until the Spotlight is fully charged The red light will shut off automatically when the battery is fully charged Recharging time is 8 to 10 hours Always unplug the Power Adapter 13 from the Spotlight after the Spotlight is charged The Spotlight will not function properly if the Power Adapter is plugged into the Spotlight Note Always recharge the Spotlight within a 24 hour period after each use Caution Never completely discharge the battery Deep battery discharge will decrease battery life The battery capacity will be reduced if the Spotlight is not used for 3 months It is recommended that the battery be re charged at least one time every 3 months Note The battery should be charged before the first use Car Adapter Your Spotlight comes with a Car Adapter 14 To operate your Car Adapter follow the steps listed below Step 1 Insert the cord end of the Car Adapter 14 into the outlet on the back of the Spotlight Plug the plug end of the Car Adapter Car Adapter 14 into your car s lighter see Figure 1 on page 4 Leave the Car Adapter 14 plugged in for approximately 9 to 12 hours until the Spotlight is fully charged Recharging time is 5 to 8 hours otep 2 Always unplug the Car Adapter 14 from the Spotlight after the Spotlight is charged The Spotlight will not functi
Download Pdf Manuals
Related Search