Central Pneumatic Electric Heater 43764 User's Manual
Contents
1. TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LI CENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER AS SUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER RE PAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF RE PLACEMENT PARTS THERETO 9 product Approved accessories are available from Harbor Freight Tools MAINTENANCE Service and maintenance should be performed regularly by a qualified technician USE THE RIGHT PRODUCT FOR THE RIGHT JOB There are certain applications for which this product was designed Do not exceed the manufacturer s PSI limitations for the tool you are using SAVE THIS INSTRUCTION FLYER You will need this instruction flyer for the Operat ing and Maintenance Procedures Safety Warn ings and Precautions Parts List and Assembly Diagram Keep your invoice with this instruction flyer Write the invoice number on the front of this flyer Keep this instruction flyer and invoice in a safe and dry place for future reference NOTE Some parts are listed and shown for illustra tion purposes only and are not available individually as replacement parts2. CENTRAL PNEUMATIC VV Model 43764 OIL WATER sions D istri buted Exelus us ne aaa 3491 Mission Oaks Bivd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2000 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions please call 1 800 444 3353 UNPACKING When unpacking check to make sure all parts shown on the back of this instruction flyer are included If any parts are missing or broken please call Harbor Freight Tools at the number shown on the front of this manual as soon as possible A Y_INS TIONS NOTE All parts below refer to the parts listed on the reverse side of this instruction flyer 1 For ease of use and to avoid damage to the Oil Air Separator it is recommended the Oil Air Separator be mounted in a convenient location on the workbench or in the work area This can be done using a hose clamp or similar fastener device 2 Check to make sure the air compressor outlet hose to which you will connect the Oil Air Separator is fitted on one end with a quick coupler and on the other end a 1 4 NPT female hose connector 3 Wrap the threads of the Oil Air Separator Male Inlet Connector part 10 with approximately 3 of Teflon tape Then wrench tighten the air compressor female hose connector onto the Male Inle
3. TI P G SAFETY WARNINGS AND PRECAUTIONS 1 KEEP PRODUCT USAGE AREA CLEAN Cluttered areas invite injuries 2 KEEP CHILDREN AWAY FROM PRODUCT USAGE 8 AREA Do not allow children to play with this product 3 DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs If there is any doubt do not attempt to use this product 4 USE EYE PROTECTION DURING ASSEMBLY AND OPERATION Wear ANSI approved safety impact eye goggles The ANSI approved safety impact goggles are available from Harbor Freight Tools 5 CHECK FOR DAMAGED PARTS Before using this product carefully check that it will operate properly and perform its intended function Check for dam aged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately 7 REPLACEMENT PARTS AND ACCESSORIES When servicing use only identical replacement parts Only use accessories intended for use with this PARTS LIST ASSEMBLY DIAGRAM DESCRIPTION Rubber Seal PART QTY 7 10 Maie inet Connector PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY _ NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED
4. t Connector of the Oil Air Separator 4 Next check to make sure the air outlet extension hose to which you will connect a tool is fitted on one end with a quick coupler and on the other end a 1 4 NPT male hose connector 5 Wrap the threads of the male connector on the extension hose with approximately 3 of Teflon tape Then wrench tighten the male connector onto the Body part 3 of the Oil Air Separator 6 Connect the quick coupler of the air outlet extension hose to the tool you are using Then connect the quick coupler of the air compressor outlet hose to the air compressor Turn on the air compressor and regulate the desired PSI 7 The Oil Air Separator is now ready for use NOTE Depending on usage periodically examine the Drainage Cup part 1 for accumulated oil and or water that is being separated from the compressed air system The oil and or water should be drained prior to its level reaching the top of the Strainer Cover part 5 MAINTENANCE AND CLEANING 1 To drain oil and or water from within the Drainage Cup use an automotive bicycie tire needle valve tool or similar small device to depress the Needle Valve part 2 located on the underneath of the unit When the Drainage Cup appears empty discontinue depressing the Needle Valve The Oil Air Separator is again ready for use 2 To clean wipe with a clean damp cloth using a mild soap with water if necessary VER F THIS INS CTION FLYER FO ODUCT WARNING
Download Pdf Manuals
Related Search