Casio Watch 5353 User's Manual
Contents
1. MA1302 EA 2013 CASIO COMPUTER CO LTD Operation Guide 4752 5353 CASIO e Your watch may differ somewhat from the one shown in the illustration Second hand To set the day of the Minute hand week and the time 1 Pull the crown out to the First click second click when the second Setting day hand is at 12 o clock position This will cause the second f hand to stop Rotate the crown to change the Second click day of the week setting The Setting day of day of the week changes when the week and time the time setting advances from a 11 00 p m to 4 00 a m You Own n can perform the following steps eee eeu Normal position to set the day of the week you Day of the week hand Day hand want more quickly e Turn the crown away from you so the time setting changes from 11 00 p m to 4 00 a m which advances the day of the week e After the day of the week changes rotate the crown towards you to return to approximately 11 00 p m e Turn the crown away from you again so the time setting changes from 11 00 p m to 4 00 a m to advance to the next day of the week e Repeat the above steps as many times as necessary to set the day of the week you want After setting the day of the week set the hands by rotating the crown Move the minute hand four or five minutes past the time you want to set and then back it up to the proper setting e Carefully set the time making sure to distinguish between AM and PM 4 Push the crown ba2. ck in to the normal position to restart timekeeping To set the day 1 Pull the crown out to the first click 2 Set the day by rotating the crown towards you in the direction indicated by the arrow in the illustration 3 Push the crown back in to the normal position e Avoid changing the day setting while the current time is between 9 00 p m and 1 00 a m E For a watch with an elapsed time bezel Rotate the elapsed time bezel to align the YY mark with the minute hand After certain amount of time elapsed read the graduation on the elapsed time bezel which the minute hand points to The elapsed time is indicated e Some water resistant models are equipped with a screw lock crown e With such models you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out Do not pull too forcibly on such crowns e Also note that such watches are not water resistant while their crowns are loosened Be sure to screw the crowns back in as far as they will go after making any setting Specifications Accuracy at normal temperature 20 seconds a month Display 3 analog hands hour minutes and seconds 3 dials 24 hour day and day of the week Battery One silver oxide battery Type SR920SW Approximately 3 years on type SR920SW
Download Pdf Manuals
Related Search