Black & Decker PD1080 Instruction Manual
Contents
1. BLACKS DECKER Powerful Solutions PD1200 PD1080 English Original instructions r A PD1200 ONLY Intended use Your Black amp Decker Dustbuster Flexi vacuum cleaner has been designed for dry vacuum cleaning purposes This appliance is intended for household use only Safety instructions Warning When using battery powered appliances basic safety precautions including the following should always be followed to reduce the risk of fire leaking batteries personal injury and material damage Read all of this manual carefully before using the appliance The intended use is described in this manual The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury Retain this manual for future reference Using your appliance Do not use near water Do not use the appliance to pick up liquids or any materials that could catch fire Do not immerse the appliance in water Never pull the charger lead to disconnect the charger from the socket Keep the charger lead away from heat oil and sharp edges This tool is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have bee2. 30 Output voltage Vac 17 Output current mA 200 Approx charging time h 24 Weight kg 0 2 Powered brush head Voltage Vdc 2 4 Brush rotation rpm 2500 Level of sound pressure measured according to EN 60704 1 72 dB A Guarantee Black amp Decker is confident of the quality of its products and offers an outstanding guarantee This guarantee statement is in addition to and in no way prejudices your statutory rights The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area Ifa Black 8 Decker product becomes defective due to faulty materials workmanship or lack of conformity within 24 months from the date of purchase Black amp Decker guarantees to replace defective parts repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless The product has been used for trade professional or hire purposes The product has been subjected to misuse or neglect The product has sustained damage through foreign objects substances or accidents Repairs have been attempted by persons other than authorised repair agents or Black amp Decker service staff To claim on the guarantee you will need to submit proof of purchase to the seller or an authorised repair agent You can check the location of your nearest authorised repair agent by contacting your local Black amp
3. Decker office at the address indicated in this manual Alternatively a list of authorised Black 8 Decker repair agents and full details of our after sales service and contacts are available on the Internet at www 2helpU com 0 OL LO L 059513 002104 aeeqylu s q ul z sepesi se d se s an uods p ue1juogua s OS sepejsij seziad sej s lqluodsip ue sa ojos a O ueyos iliqluodsip OUOS ajerzied ouoddns sajqiuodsip juos s nbipul s ld sajnas puls ll ANN ajqejleae umoys sued JUO Hoddns ened 0031 dd 0801 dd Sa r lt gt Do not forget to register your product www blackanddecker co uk productregistration Register your product online at www blackanddecker co uk productregistration or send your name surname and product code to Black amp Decker in your country Australia Black amp Decker Australia Pty Ltd Tel 03 8720 5100 20 Fletcher Road Mooroolbark Fax 03 9727 5940 Victoria 3138 New Zealand Black amp Decker Tel 64 9 259 1133 5 Te Apunga Place Fax 64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black amp Decker Tel 01753 511234 210 Bath Road Fax 01753 551155 Slough Berkshire SL1 3YD H
4. air or threads that have collected on the brush use a pair of scissors if necessary Replacing the filters The filters should be replaced every 6 to 9 months and whenever worn or damaged Replacement filters are available from your Black amp Decker dealer cat no PD10 Remove the old filters as described above Fit the new filters as described above Protecting the environment Separate collection This product must not be disposed of with normal household waste Should you find one day that your Black amp Decker product needs replacement or if it is of no further use to you do not dispose of it with household waste Make this product available for separate collection Ga Separate collection of used products and packaging allows materials to be recycled and used again Re use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials Local regulations may provide for separate collection of electrical products from the household at municipal waste sites or by the retailer when you purchase a new product Black amp Decker provides a facility for the collection and recycling of Black amp Decker products once they have reached the end of their working life To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf You can check the location of your nearest authorised repair ag
5. e sure that the appliance is switched off The battery will not be charged with the on off power switch 1 in the on position Insert the plug into the charging inlet 6 in the base Plug in the charger and switch on at the mains The charging indicator 8 will be lit For the first charging leave the appliance to charge for at least 24 hours To charge the powered brush head sure that the powered brush head 13 is switched off The battery will not be charged with the on off power switch 17 in the on position Insert the plug into the charger inlet 16 Plug in the charger and switch on at the mains The charging indicator 15 will be lit For the first charging leave the appliance to charge for at least 24 hours While charging the charger may become warm This is normal and does not indicate a problem While it is safe to leave the appliance powered brush head connected to the charger indefinitely to reduce power consumption we would recommend unplugging the charger after 24 hours The charging indicators will be lit as long as the appliance is connected to the plugged in charger Switching on and off To switch the appliance on slide the on off power switch 1 to the right to position 1 To switch the appliance off slide the on off power switch 1 to the left until it clicks into the off position Vacuuming When operating the appliance make sure that t
6. e appliance tool battery must be placed in a well ventilated area when charging Electrical safety Your charger has been designed for a specific voltage Always check that the mains voltage corresponds to the voltage on the rating plate Never attempt to replace the charger unit with a regular mains plug This appliance is double insulated therefore no earth wire is required Always check that the power supply corresponds to the voltage on the rating plate The charger is intended for indoor use only Read the instruction manual before use IBD E The charger automatically shuts off if the ambient temperature becomes too high As soon as the ambient temperature has cooled down the charger will resume operating 40 C 109 Features Charge only at ambient temperatures between 10 C and 40 C This appliance includes some or all of the following features On off power switch Removable hose handle Locking ring Hose Filter cleaning wheel Charging inlet Transparent door LED charging indicator 9 Door latch 10 2 in 1 combi nozzle accessory 11 Accessory clip The following accessories are only available with model number PD1200 fig A amp B 12 Accessory caddy 13 Powered brush head 14 Crevice tool The powered brush head is not included with all models COND Assembly Mounting accessories fig A B amp C The 2 in 1 combi nozzle 10 has a brush that can be folded forward
7. elpline 01753 574277 90560155 REV 0 L 01 10
8. ent by contacting your local Black Decker office at the address indicated in this manual Alternatively a list of authorised Black amp Decker repair agents and full details of our after sales service and contacts are available on the Internet at www 2helpU com Batteries x Black 6 Decker batteries can be recharged many nm times At the end of their useful life discard batteries with due care for our environment If you want to dispose of the product yourself the batteries must be removed as described below and disposed of in accordance with local regulations Discharge the battery by operating the appliance until the motor stops Invert the appliance to get access to the screws that attach the base fig H 6 1 Remove the 4 screws 21 or 22 Remove the base Disconnect the 3 pin connector Place the battery in suitable packaging to ensure that the terminals cannot be short circuited NiHM batteries are recyclable Take them to any authorised repair agent or a local recycling station a S XS Technical data Please visit our website www blackanddecker co uk to PD1200 H2 PD1080 H2 register your new Black amp Decker product and to be kept up Voltage Vde 12 10 8 to date on new products and special offers Further Weight kg 1 8 1 75 information on the Black amp Decker brand and our range of products is available at www blackanddecker co uk Charger A170020D Input voltage Vac 2
9. for dusting and upholstery cleaning The crevice tool 14 allows for vacuuming in narrow and hard to reach places The powered brush head 13 has its own rechargeable batteries and is charged separately from the appliance refer to Charging the battery section To fit an accessory press the accessory clip 11 and slide the accessory onto the handle 2 To remove an accessory press the accessory clip 11 and remove the accessory The handle 2 can be removed from the hose 4 allowing the accessories to be connected directly to the hose cuff 18 when required To remove the handle the handle 2 from the appliance Rotate the locking ring 3 anti clockwise to release the clips Pull the hose 4 away from the handle 2 Fit the accessory directly to the hose cuff 18 To refit the handle Remove the accessory from the hose Push the hose 4 into the handle 2 Rotate the locking ting 3 clockwise until it clicks into place Fitting the accessory caddy PD1200 fig D When notin use accessories can be stored in the accessory caddy 12 The accessory caddy can be removed if necessary To install the accessory caddy 12 slide it onto the lugs on the body of the appliance until it clicks into place To remove the accessory caddy 12 pull it away from the base of the appliance Residual risks Additional residual risks may arise when using the tool which may n
10. he hose is not trapped twisted or blocked The handle 2 can be easily removed from the appliance allowing you to reach up to 1 5 m from the appliance With the handle 2 removed the appliance can be carried using the built in handle The handle 2 can also be removed from the hose 4 so that you can connect an accessory directly to the hose cuff 18 when required Hints for optimum use When working in confined spaces temporarily remove the accessory caddy 12 from the base to improve your scope When vacuuming stairs always start at the bottom and work your way Up Using the powered brush head fig A The powered brush head 13 can only be used with the handle removed from the appliance To switch the powered brush head to on move the on off switch 17 to the on position slide the on off power switch 1 to the on position Move the powered brush head 13 steadily backwards and forwards Do not keep the brush on the same place for a long time as this might damage the surface Move the on off switch 17 to the off position to switch the powered brush head off Optimising the suction force In order to keep the suction force optimised the filters must be cleared regularly during use Turn the filter cleaning wheel 5 two turns clockwise to remove out any dust from the filters The fine particulate filter must be cleaned regularly see Cleaning the fine particulate filter sec
11. n given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance After use Unplug the charger before cleaning the charger or charging base notin use the appliance should be stored in a dry place Children should not have access to stored appliances Inspection and repairs Before use check the appliance for damaged or defective parts Check for breakage of parts damage to switches and any other conditions that may affect its operation Do not use the appliance if any part is damaged or defective Have any damaged or defective parts repaired or replaced by an authorized repair agent Regularly check the charger lead for damage Replace the charger if the lead is damaged or defective Never attempt to remove or replace any parts other than those specified in this manual Additional safety instructions batteries and chargers Batteries Never attempt to open for any reason Do not expose the battery to water Do not expose the battery to heat Do not store in locations where the temperature may exceed 40 C Charge only at ambient temperatures between 10 C and 40 C Charge only using the charger provided with the appliance tool Using the wrong charger could result in an electric shock or overheating of the battery When disposing of batteries foll
12. ot be included in the enclosed safety warnings These risks can arise from misuse prolonged use etc Even with the application of the relevant safety regulations and the implementation of safety devices certain residual risks cannot be avoided These include Injuries caused by touching any rotating moving parts Injuries caused when changing any parts blades or accessories Injuries caused by prolonged use of a tool When using any tool for prolonged periods make sure you take regular breaks Impairment of hearing Health hazards caused by breathing dust developed when using your tool example working with wood especially oak beech and MDF S Use Before first use the batteries must be charged for at least 24 hours Connect the appliance and the powered brush head 13 to the charger for a minimum of 24 hours Charge the batteries as described below You may need to charge discharge the appliance a minimum of 5 times in order to achieve the best running time performance Charging the battery fig A 8 E Warning Do not charge the battery at ambient temperatures below 10 C or above 40 C Note If your vacuum cleaner is supplied with a single charger with a dual lead to charge both the appliance and the powered brush head 13 the jack plugs are the same size and are interchangeable The appliance and the powered brush head 13 can be charged at the same time To charge the applianc
13. ow the instructions given in the section Protecting the environment Do not damage deform the battery pack either by puncture or impact as this may create a risk of iniury and fire Do not charge damaged batteries Under extreme conditions battery leakage may occur When you notice liquid on the batteries carefully wipe the liquid off using a cloth Avoid skin contact n case of skin or eye contact follow the instructions below Warning The battery fluid may cause personal injury or damage to property In case of skin contact immediately rinse with water If redness pain or irritation occurs seek medical attention In case of eye contact rinse immediately with clean water and seek medical attention Chargers Your charger has been designed for a specific voltage Always check that the mains voltage corresponds to the voltage on the rating plate Warning Never attempt to replace the charger unit with a regular mains plug Use your Black amp Decker charger only to charge the battery in the appliance tool with which it was supplied Other batteries could burst causing personal injury and damage Never attempt to charge non rechargeable batteries Ifthe supply cord is damaged it must be replaced by the manufacturer or an authorised Black amp Decker Service Centre in order to avoid a hazard Do not expose the charger to water Do not open the charger Do not probe the charger CB Mb Th
14. tion Cleaning and maintenance Emptying the dust container fig F The dust container must be emptied regularly preferably after every use Release the door catch 9 and open the transparent door 7 180 until it clicks in the open position Remove the pre filter 19 Empty the dust container Clean the pre filter 19 by lightly shaking over a dustbin Refit the pre filter 19 00000 M Close the transparent door 7 and make sure that it clicks into place Warning Do not under any circumstances rinse out the dust container Warning Do not immerse the appliance in water A damp cloth and soapy water should be used to clean the exterior of the appliance Always make sure that the appliance is completely dry before re use or storing Cleaning the fine particulate filter fig H The fine particulate filter 20 prevents particles and larger objects from entering the motor housing The filter 20 is re usable and should be cleaned regularly Remove the pre filter 19 from the appliance as described above Remove the fine particulate filter 20 by pulling firmly Tap the filter vigorously to remove loose dust from the filter If necessary wash the filter in warm soapy water Make sure that the filters are dry Refit the fine particulate filter 20 on to the appliance Refit the pre filter 19 as described above Clearing the powered brush head fig H Remove any h
Download Pdf Manuals
Related Search