Avaya M3900 Installation Guide
Contents
1. Insert the clips on the telephone into the hinges on the footstand then press on the front of the footstand until it snaps into place 5 While depressing the telephone tilt handle swing the footstand into the desired position then release the handle 6 Carefully turn the new assembly upright Installing the l Display Based Accessory Module Configuring the Prompt Response Description Meridian 1 for the Display Based REQ NEW Input new data Accessory Module CHG Change existing data in LD 11 TYPE 3904 Only M3904 and M3905 support the Display Based 3905 Accessory Module KBA 0 Key Based Accessory Module Number of KBAs 0 default DBA 0 1 Display Based Accessory Module Number of DBAs 0 default 1 DBA Note The Key Based Accessory Module and the Display Based Accessory Module are mutually exclusive A telephone cannot have both installed or configured That is if a non zero value is input for KBA any non zero value entered at the DBA prompt results in an error message FDN XXX X Note 1 The Display Based Accessory Module prompt DBA appears when the telephone type is M3904 or M3905 Note 2 Each Display Based Accessory Module provides 24 additional programmable line feature keys These additional keys are configured in LD 11 Key numbers associated with the Bue Based Accessory Module are 32 through 55 33 through 56 for the Meridian SL 100 Standard 2 00 2 of 3 N00235362. M3900 Series Display Based Accessory Module Installation Guide Configuring the Meridian SL 100 for the Display Based Accessory Module in Servord N0023536 Prompt Response Description ADO Line X X Line or DN x x Line or DN number OPTKEY 1 Option key OPTION DBA Display Based Accessory Module 3 of 3 Standard 2 00
3. M3900 Series Display Based Accessory Module Installation Guide This document describes how to install the Display Based Accessory Module DBA NTMN67xx for the M3900 Series Digital Telephones The DBA expands the number of lines and features available to the M3904 and M3905 telephones using soft labeled keys Note Only Phase Ill M3905 telephones support the DBA The DBA provides three layers of eight programmable line feature keys for a total of 24 keys Use the Page key to move among the three layers Use the Edit command under the Options menu and the dialpad keys to change the default 10 character programmable key labels Note The DBA and Key Based Accessory Module KBA are mutually exclusive A telephone with one or two KBAs configured or installed cannot have a DBA Figure 1 Display Based Accessory Module DBA Programmable line feature keys Plug into the 10 pin slot Page ke g y 553 9554 N0023536 1 of 3 Standard 2 00 M3900 Series Display Based Accessory Module Installation Guide While depressing the telephone tilt handle pull the telephone away from the footstand until it clears the final stop Gently pull the footstand off the clips 2 Place the telephone and the Display Based Accessory Module face down on a non abrasive surface and align them 3 Lower the Module into place and insert the 10 pin plug on the Module into the 10 pin slot on the telephone Push in gently until they snap into place 4
Download Pdf Manuals
Related Search