Audiovox CDC-FDN User's Manual
Contents
1. e RIGHTFRONT 9 12VDC BATTERY MEMORY eee io 12vDC BATTERYACC 25 FEMALE SPADE J3 CD CHANGER 11 CHASSIS GROUND TERMINAL DATA CONNECTOR 12 LEFTREAR O LEFT REAR WIRE COLOR LEFT FRONT WILL VARY GROUND POWER SPEAKER LEFT FRONT WITH VEHICLE TERMINAL CONNECTOR 16 POWER AMP GROUND See Note T TAP OR SPLICE ONTO BLACK w GREEN STRIPE WIRE AT PIN 9 LOCATION GROUND WIRE 25 MALE SPADE TERMINAL PROVIDED IN KIT GRAY PURPLE WIRE CONSTANT 12 VOLTS J3 VEHICLE CD CHANGER CONNECTOR 6 OR 10 DISC CHANGER NOTE For vehicles without ground terminal splice Black w Green stripe wire into Pin 11 of the vehicle side J1 connector2. the dash panel using the factory removal tools Unplug both the J1 power speaker and the J3 CD Changer connector from rear of the factory radio Carefully connect the vehicle CD Changer J3 connector to the respective mating connector on the CDC FDN and CD Changer connector of the CDC FDN to the respective mating connector at the rear of the radio Carefully reconnect the vehicle side J1 power speaker connector to the mating connector at the rear of the factory radio Depending on the application connect the Black Green wire to the ground tab on the back of the factory radio chassis or splice wire to Pin 11 of the vehicle side J1 connector Either by splicing or using the T tap provided connect the Grey Purple wire from the CDC FDN to Pin 9 wire of the vehicle side J1 connector OPERATION CHECK 1 2 Load CD s into the CD Changer cartridge and insert the cartridge into the changer Start vehicle and allow CD Changer to cycle Perform a brief functional test to verify proper operation according to the owner s manual 1998 Audiovox Corporation 150 Marcus Blvd Hauppauge N Y 11788 Printed in China CDC FDW Installation Diagram Fig 1 OR 10 DISC CHANGER VEHICLE CD CHANGER DATA CONNECTOR CD CHANGER LOCATED IN TRUNK DATA CONNECTOR 8 PIN DIN CONNECTOR 5 STARTIMUTEFORCRANK 4 CLOCKSET 5 mGHTREAR s mGHrREARO FACE VIEW OF CONNECTOR
3. INSTALLATION GUIDE FOR Ep CD CHANGER SERIES INTERFACE CABLE Models CDC FDN amp CDC FpW for 1998 99 FORD VEHICLES Form No 128 5399A CAUTION FOLLOW THE CONNECTION SEQUENCE DESCRIBED BELOW TO ENSURE PROPER RECOGNITION OF THE CD CHANGER BY THE FACTORY RADIO DO NOT FORCE CONNECTORS TOGETHER LINE UP LOCATING TABS AND CAREFULLY MATE CONNECTORS INSTALLATION INSTRUCTIONS FOR THE CDC FDW Fig 1 IMPORTANT Installation must be done with vehicle and radio in OFF position 1 e Mount the CD Changer at the desired location in the trunk following the installation instructions supplied with the CD Changer Carefully connect the 8 pin circular DIN connector from the CDC FDW to the mating socket on the CD Changer Route the CDC FDW cable toward the existing factory CD Changer connector located in the trunk area With the vehicle off carefully connect the CDC FDW female connector to the male factory CD Changer connector INSTALLATION INSTRUCTIONS FOR THE CDC FDN Fig 2 IMPORTANT Installation must be done with vehicle and radio in OFF position Mount the CD Changer at the desired location either in the center console CDC 620 only or in the rear of the vehicle Refer to the installation instructions supplied with the CD Changer Carefully connect the 8 pin circular DIN connector from the CDC FDN to the mating socket on the CD Changer Route the CDC FDN cable toward the factory radio Remove the factory radio from
Download Pdf Manuals
Related Search