ATD Tools ATD-7470 User's Manual
Contents
1. Tank Adapter checking for abnormal conditions 1 It is important to keep the product clean 2 Periodically wipe the product with an oily cloth 3 Inspect the product annually Paint contains lead DO NOT sand or grind painted surface Storage Store the fuel tank adapter in a clean dry area when not in use TROUBLESHOOTING Symptom Possible Causes Corrective Action A vertical arm will not reposition Bent parts Contact Customer Service The fuel tank does not maintain steadiness while on the adapter Loose support pad Contact Customer Service The adapter is shaky or feels Check replace and tighten Components are worn or loose loose components and fasteners ONE YEAR LIMITED WARRANTY For a period of one 1 year from date of purchase ATD Tools Inc will repair or replace at its option without charge any of its products which fails due to a defect in material or workmanship under normal usage This limited warranty is a consumer s exclusive remedy Performance of any obligation under this warranty may be obtained by returning the warranted product freight prepaid to ATD Tools Inc Warranty Service Department 160 Enterprise Drive Wentzville MO 63385 Except where such limitations and exclusions are specifically prohibited by applicable law 1 THE CONSUMER S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE 2 ATD Tools Inc SHALL NOT BE LIABLE FOR ANY CONSEQU2. 70 ATD Tools Inc 160 Enterprise Drive Wentzville MO 63385 636 327 9050
3. ENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER 3 ANY IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO ONE YEAR OTHERWISE THE REPAIR REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED 4 ANY MODIFICATION ALTERATION ABUSE UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state 6 Replacement Parts List for ATD 7470 REPLACEMENT PARTS Not all components of the Fuel Tank Adapter are replacement items but are illustrated as a convenient reference of parts location When ordering parts give part number and parts description Call or write for current pricing ATD Tools Inc 160 Enterprise Drive Wentzville MO 63385 Tel 636 327 9050 Fax 636 327 9044 Q Foam Pad Foot Assembly 1 Hole Foam Pad Foot Assembly 1 2 Hole ATD7470 M0 Figure 7 Replacement Parts Illustration for ATD 74
4. Fuel Tank Adapter POVAN Operating Instructions amp Parts Manual Model Capacity ATD 7470 80 Ibs A This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER e Leer comprender y seguir las instrucci nes antes de util i el Risk of Explosion Use of this product re a hee a quires special skills and knowledge pertain Wy y e El manual de instrucci nes y la informaci n de seguridad deben estar comunicado en lengua del operador antes del uso e No seguir estas indicaci nes puede causar da os personales o materiales ing to grounding and bonding of the components Use ONLY on METAL FUEL TANKS ATD Tools Inc 160 Enterprise Drive Wentzville MO 63385 Printed in China ATD7470 MO 04 08 SAFETY and GENERAL INFORMATION Save these instructions For your safety read understand and follow the information provided with and on this device before using The owner and operator of this equipment shall have an understanding of it and safe operating procedures before attempting to use The owner and operator shall be aware that use of this product requires spe cial skills and knowledge pertaining to bonding and grounding of personnel and components Instructions and safety information shall be conveyed in the operator s native language before use of this product is authorized If any doubt
5. bonding cables 6 to the top side of frame base with 1 4 20x1 bolt and nut provided Note Remove paint from top and bottom of plate around the 1 4 diameter hole 8 Bolt safety nylon strap 7 to support stand 3 Secure with 1 2 13x1 bolt washer lockwasher and nut provided Repeat procedure on other support stand 9 The assembly is now ready to use Support Stand 1 a mm Side View Figure 5 Assembly instruction 3 3 BEFORE USE Verify that the product and the application are compatible Before using this product read this fuel tank adapter manual the transmission jack manual and the vehicle service manual completely Familiarize yourself thoroughly with the product its components and recognize the potential hazards associated with its use Locate and place a Class B fire extinguisher near the working area 4 Affix the fuel tank adapter to transmission jack properly before removing or installing the fuel tank a Bond the Fuel Tank Adapter to the transmission jack and to the fuel tank while grounding the transmission jack to earth before removing or installing the fuel tank Operator must be bonded to both the jack and tank If unsure how to provide proper grounding and bonding of personnel and equipment STOP discontinue use and seek the advice of qualified personnel 6 Replace worn or damaged parts and assemblies with factory authorized replacement parts only 7 Inspec
6. exists as to the safe and proper use of this device remove from service immediately Inspect before each use Do not use if broken bent cracked or damaged parts including labels are noted Any Fuel Tank Adapter that appears damaged in any way operates abnormally or is missing parts shall be removed from service immediately If you suspect that the product was subjected to a shock load a load dropped suddenly unexpectedly upon it immediately discontinue use until it has been checked by a factory authorized service center contact distributor or manufacturer for list of authorized service centers It is recommended that an annual inspection be done by qualified personnel Labels and owner s manuals are available from manufacturer PRODUCT DESCRIPTION This Fuel Tank Adapter is designed for fuel tank removal and fuel tank installation This Fuel Tank Adapter must ONLY be secured to ATD transmission jack model ATD 7430 ATD 7431 It is designed for use with passenger cars and light trucks only The Fuel Tank Adapter should only be used on METAL FUEL TANKS SPECIFICATIONS Model Capacity Max aie Jane fa uae ai Net Weight ATD 7470 80 lb 40 gal 32 x 15 3 8 x 9 1 4 49 Ib Risk of Explosion Use of this product requires special skills and knowledge pertaining to grounding and bonding of the components Use ONLY on METAL FUEL TANKS Bonding Cable Support Pad Support Stand Safety Nylon Strap Figure 1 Fuel Tank Adapter C
7. k If unsure how to provide proper bonding of personnel and equipment STOP discontinue use and seek the advice of qualified personnel Clip one bonding cable to the fuel tank Clip the other bonding cable to the transmission jack Ground the transmission jack to earth Center the fuel tank on all four of the Fuel Tank Adapter padded supports For adjustment a Open the latch of the safety snap pin and remove b Slide the support stand to the desired location c Re insert safety snap pins through the holes in both the support stand and arm Close the latch of snap pin d Adjust the opposite support stand to match the previously repositioned support stand e Ascertain that the load is centered with respect to the transmission jack Place the safety nylon straps around the fuel tank and hook them to the holes on the on support pads refer to Figure 6 and Figure 5 side view Securely tighten using the ratchet Note To loosen the strap pull the safety latch on the ratchet downward and rotate handle 180 degrees When the strap has been fully opened the strap may be pulled through the ratchet to take up excess slack 10 Ascertain that the hooks stay in place while tightening with the ratchet 11 Remove fuel tank according to the vehicle service manual 12 Lower the transmission jack to its lowest position before transporting the fuel tank Figure 6 MAINTENANCE Inspections should be made before each use of the Fuel
8. modify this device e Failure to heed these markings may result in personal injury and or property damage e The paint on this product contains lead a chemical known in the State of California to cause cancer birth defects and other reproductive harm e Do not ingest paint chips and keep product away from children e Wash hands after each use Operator must be bonded to both the jack and tank If unsure how to provide proper bonding of personnel and equipment STOP discontinue use and seek the advice of qualified personnel BEFORE USE 1 Verify that the product and the application are compatible if in doubt call ATD Tech Service 2 Before using this product read the operator s manual completely and familiarize yourself thoroughly with the product and the hazards associated with its improper use 3 Inspect before each use Do not use if bent broken or cracked components are noted 4 Ensure that all parts move freely OPERATION Removal of Fuel Tank Refer to Figure 6 1 2 3 NOOA 8 9 Read and follow the fuel tank removal installation procedures as stated in the vehicle service manual Drain the existing fuel into an approved and grounded fuel storage tank Raise the transmission jack to directly underneath the designated fuel tank refer to your transmission jack owner operator s manual for instructions on how to raise and lower the transmission jack Operator must be bonded to both the jack and tan
9. omponents INSTALLATION refer Figure 1 thru 5 Note Below instruction is illustrating the use of fuel tank adapter conjunction with Model ATD 7430 ATD 7431 Estimated Time 30 minutes Tools required Drill 7 16 drill bit 17mm amp 19mm wrenches Fig 2 Dh Remove saddle from the transmission jack 2 Drill two 7 16 size holes on the saddle Ensure the holes are 9 1 2 apart and should be located equally away from the saddle edges about 1 Refer figures 2 amp 3 for location of holes Note The integrity of your transmission jack should not be affected by these two holes as long as the instructions are followed ATDII warrant its transmission jack original warranty for this specific fuel tank adapter installation Fig 3 3 Secure the fuel tank adapter to the saddle with two 3 g 24x1 1 2 bolts flat washers lock washers and nuts provided Figure 4 Refer to Figure 5 for below procedures 4 Slide support stand 1 over one end of the two arms 2 Repeat procedure on other end of same arm Slide support stand 3 over one end of the other arm Repeat procedure on other end of same arm 5 Secure each support stand by inserting snap pin 4 through the aligned holes on arm snapping the latch over the end of pin as shown 6 Insert the 3 g 16 x 2 1 2 Bolt 5 through the last set of holes in arm and l secure in place with washers lockwasher and nut provided Repeat for Fig 4 other three sides 7 Secure both
10. t before each use Do not use if bent broken or cracked components are noted A DANGER NO SMOKING NEVER use fuel tank handler near open flame heat sources or spark inducing environments ALWAYS have a Class B fire extinguisher available Drain ALL fuel from the vehicle fuel tank into an approved and grounded fuel storage tank NEVER drain or store fuel in an open container near open flames heat sources or spark inducing environments If the fuel tank is damaged during servicing STOP and discard the fuel tank Use ONLY on METAL FUEL TANKS Do not use on plastic fuel tanks FAILURE TO HEED THESE WARNINGS COULD RESULT IN DEATH PERSONAL INJURY AND OR PROPERTY DAMAGE Study understand and follow all instructions provided with and on this device before use e Do not exceed rated capacity e Use the Fuel Tank Adapter only with ATD transmission jack models ATD 7430 ATD 7430 e ALWAYS bond the fuel tank to the transmission jack and bond the transmission jack to the earth using the two bonding cables provided e ALWAYS center fuel tank on the four support pads e ALWAYS secure fuel tank to fuel tank adapter using the provided safety nylon straps e The fuel tank and the Fuel Tank Adapter must be completely lowered transmission jack ram fully retracted before transporting e Do not use adapters or accessories that are not provided initially Only accessories supplied by the manufacturer can be used e Do not
Download Pdf Manuals
Related Search