Abocom WAP252 User's Manual
Contents
1. 802 11b g Access Point Hardware Installation Before you starting hardware connection you are advised to find a appropriate location to place the Access Point Usually the best place for the Access Point is at the center of your wireless network with line of straight to all your wireless stations Also remember to adjust the antenna usually the higher the antenna is placed the better will be the performance Wireless Access Point Default IP address 192 168 1 254 PC_WLAN IP address 192 168 1 xx Power Adapter SSID 802 11g AP ESSID 802 11g AP oo Channel 11 Channel 11 Device name Wireless AP J Encryption Disabled aay To Ethernet network equipment e g Router Switch or another Wireless Access Point Encryption Disabled D4 UTP cable Wireless LAN Card Step 1 Connect to your local area network connect a Ethernet cable to one of the Ethernet port LANI or LAN2 of this Wireless Access Point and the other end to a hub switch router or another wireless access point Step 2 Power on the device connect the included AC power adapter to the Wireless Access Point s power port and the other end to a wall outlet Check the LEDs The Power and LAN LEDs should be ON LANE LED will even blink if there is traffic The Link Act LED will blink if no client station is being associated to this Wireless Access Point If the ErrStatus LED glows it means this Wirele2. ss Access Point fails on self test Please ask your dealer for technical support Step 3 Configure your PC Make sure your local PC s has wireless network adapter installed Check the LED The Link Act LED should be ON in static when your PC associates to this Wireless Access Point In order to use the Access Point other Wireless devices must use the same SSID and WEP settings as the Wireless Access Point The Wireless Access Point s default settings are as follows Wireless Access Point s default settings Soning Wireless Access Pom creaa a Access Point Configuration 1 Start your computer Connect an Ethernet cable between your computer and the Wireless Access Point 2 Make sure your wired station is set to the same subnet as the Wireless Access Point i e 192 168 100 12 3 Start your WEB browser In the Address box enter the following HTIP 192 103 1 254 Wireless AP Microsoft Internet Explorer File Edit View Favorites Tools Help gt ix a A p Search p Fa The default Username is set to be admin and no password is required just click OK to enter the web configuration screen to start the Wireless Access Point configuration For the detailed configuration please refer to the User Manual Connect to 192 168 1 254 Wireless Access Point User name admin Password C Remember my password Ca MEOR MERET d OERDEI
Download Pdf Manuals
Related Search