Panasonic Computer Cradle
Contents
1. GAMBER JOHNSON Very Well Connected INSTALLATION INSTRUCTIONS Product Revision Form 7160 0415 CF53 Cradle w PushLock Rev A INST 564 7160 0415 01 CF53 Cradle w AutoLock 7160 0123 LED Light Asembly 7160 0124 Screen Support Assembly Vehicle Mounting Printing Spec PS 001 The CF53 Cradle is designed to be used with Gamber Johnson motion attachments poles and vehicle bases Four 25 20 x 50 long Button Head Screws are supplied in the cradle hardware bag to secure motion attachments to the bottom side of the cradle Front Restraint L AI XD Button Head Screws PushLock or AutoLock Handle Installing CF53 Computer into Cradle Press the PushLock or turn AutoLock with key to move the Handle and Rear Hooks back With the computer tilted forward slightly position the computer between the two side tabs and insert the computer case handle under the Front Restraint Lower the back of the computer so all four rubber feet are on the cradle surface and the back edge of computer case is captured by the rear tabs Pull the cradle Handle forward until the Rear Hooks engage the computer case and the Lock catches Use the supplied key to lock the PushLock if necessary Product Mounting Disclaimer Gamber Johnson is not liable under any theory of contract or tort aw for any loss damage personal inury special incidental or consequential damages for personal injury or other damage of any nature arising directly2. he Screen Support Accessory is also used place the Light Assembly on the bottom side as shown The LED is powered using the red and black wires on the back of the light base The LED Assembly is 8 32 X OO Screws designed to operate on 12volts DC amp 8 Flat Washers LED Light Assembly In a negative ground vehicle Connect the RED wire to the positive pole of the vehicle battery or power distribution box It is recommended that a user supplied fuse holder and 1 amp fuse be installed on red wire Connect the Black wire to a suitable chassis GROUND or the NEGATIVE pole of the battery Activation Button Turn on LED by pressing the Activation Button on head of LED Assembly LED has three light options White Red and White Red Press the Activation Button to toggle throught options Hold the Activation Button down for approximately one second to turn LED off
3. or indirectly asa result of the improper installation or use of its products in vehicle or any other application In order to safely install and use Gamber Johnson products full consideration of vehicle occupants vehicle systems i e the location of fuel lines brakes lines electrical drive train or other systems air bags and other safety equipment is required Gamber Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications and recommendations Gamber Johnson product instruction sheets or workmanship standards as endorsed through the Gamber Johnson Certified Installer Program copyright 2011 Gamber Johnson LLC If you need assistance or have questions call Gamber Johnson at 1 800 456 6868 Cradle Accessories 7160 0124 Screen Support Assembly Use two 8 32unc x 50 long Phillips Pan Head Screws and two 8 Flat Washers to attach the Screen Support Assembly to the bottom of the CF53 cradle as shown Position Screen Support Assembly forward or backward to support Power Plug or allow access to USB ports Bend the Screen Support Arm slightly if A 8 32 x 50 Screws needed to contact the computer display amp 8 Flat Washers Screen Support 7160 0123 LED Light Assembly Use two 8 32unc x 50 long Phillips Pan Head Screws and two 8 Flat Washers to attach the Light Assembly to the bottom of the CF53 cradle If t
Download Pdf Manuals
Related Search