Altronix ACM4 remote power controller
Contents
1. of installation Product weight approximate ACMG4E 6 6 lbs ACMA4CBE 6 7 lbs Shipping weight approximate ACMG4E 7 5 lbs ACMA4CBE 7 6 lbs Board Dimensions approximate ACM4 ACMACEB 5 125 L x 3 625 W x 1 25 H Mounting Diagram 0 19 0 156 m 5 175 Board Dimensions approximate ACM4E ACM4CRBE 8 5 H x 7 5 W x 3 5 D 7 25 3a poa 1 25 AN l WY 3 50 125 0 60 6 05 0 60 1 1 125 A a 112s 2 00 P z A Av N WY aN S w 0 WY 0 60 6 05 0 60 Se ier yes Altronix Corp 140 58th Street Brooklyn NY 11220 718 567 8181 888 258 7669 altronix com2. 12volt 2 amp 24 volt current consumption with all relays energized Power supply input options a One 1 common power input board and lock power b Two 2 isolated power inputs one 1 for board power and one 1 for lock accessory power Four 4 Access Control System trigger inputs a Four 4 normally open NO inputs b Four 4 open collector sink inputs c Any combination of the above Four 4 independently controlled outputs a Four 4 Fail Safe and or Fail Secure power outputs b Four 4 dry form C 5 amp rated relay outputs ACM4 ACMGAE only c Any combination of the above ACM4 ACMG4E only Four 4 auxiliary power outputs unswitched Output ratings Fuses are rated 3 amp each ACM4 ACM4E PTCs are rated 2 5 amp each ACM4CB ACM4CBE Main fuse is rated at 10 amp Note Total output current 1s determined by the power supply not to exceed a maximum of 10 amp total Red LEDs indicate outputs are triggered relays energized Fire Alarm disconnect latching or non latching is individually selectable for any or all of the four 4 outputs Fire Alarm disconnect input options a Normally open NO or normally closed NC dry contact input b Polarity reversal input from FACP signaling circuit FACP output relay form C contact rated 1 amp 28VDC not evaluated by UL Green LED indicates when FACP disconnect is triggered Removable terminal blocks facilitate ease
3. M Altronix ACM4 ACM4E ACM4CB and ACM4CBE Multi Output Access Power Controllers Rev DSACM4 D07H Overview ACM4 ACM4CB e Access Power Controller w fuse protected outputs e These units convert one 1 12 to 24 volt AC or DC input into four 4 independently controlled fused or PTC protected outputs These power outputs can be converted to dry form C contacts ACM4 amp ACM4E only Outputs are activated by an open collector sink or normally open NO dry trigger input from an Access Control System Card Reader Keypad Push Button PIR etc The units will route power to a variety of access control hardware devices including Mag Locks Electric Strikes Magnetic Door Holders etc Outputs will operate in both Fail Safe and or Fail Secure modes Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices or two 2 totally independent power sources one 1 providing power for board operation and the other for lock accessory power The FACP Inter face enables Emergency Egress Alarm Monitoring or may be used to trigger other auxiliary devices The fire alarm disconnect feature is individually selectable for any or all of the four 4 outputs ACM4E e ACM4 w enclosure ACM4CBE e ACM4CB w enclosure e Access Power Controller w PTC protected outputs Specifications 12 to 24 volt AC or DC operation setting not required 4 amp
Download Pdf Manuals
Related Search