Tandberg Data RDX QuikStor Internal Drive 300GB SATA
Contents
1. ALLATION CD Pe mmtm 33000 09 AX caution If the RDX software is not installed under Windows the eject button and right click eject method may not work properly Mounting the Unit Server Front Unit Mounting the 3 5 inch unit Mounting the 5 25 inch unit Open the server cover Slide the unit into an unused drive bay until the bezel is flush with the front of the server The Eject Power LED should be on the lower right Secure the unit using the 4 mounting screws provided Connecting the Unit Carefully connect the SATA cable to your system s SATA controller built in or PCI card Attach the power adapter cable Check all the cable routing and cable connections Replace server cover Power ratings 5vDC 1 8A2. LED LED Status Meaning Description On Green Ready Cartridge is ready Blinking Green Activity Reading writing seeking On Amber Fault Unit has detected a cartridge fault condition For more information run a diagnostic application Product Registration Register this product today at http tandbergdata com register RDX UTILITY AND SOFTWARE INSTALLATION CD www tandbergdata com 2008 RDX is a registered trademark of ProStor Systems Inc Part no 433649 03 TANDBERG DATA Internal SATA version rex QUIKSTOR Quick Start Guide Check Your Accessory Kit Contents Mounting Screws Secure unit in standard 3 5 inch or 5 25 inch bay Power Adapter Cable Provides power to the unit SATA Data Cable Connects RDX unit to the host Warranty Card RDX Utilities and Backup Software CD Contains more detailed information on the RDX system as well as the utility software and backup application RDX System Features Emergency Eject Hole Activity LED Eject Button Power LED RDX Cartridge Features Write Protect Activity LED Unpacking the Unit Accessories P Packing Foam Drive in ESD Packaging After removing the drive and accessories carefully place it on a flat work surface top up Remember to always protect your unit and server from electrostatic damage Installing the Software Install the software QUIKSTOR supplied on your RDX Product CD RDX UTILITY AND SOFTWARE INST
3. Operating the RDX System Handling Cartridges Although the RDX cartridges are ruggedly built they must be handled with care to ensure data integrity and long life Keyed a Corner Insert the cartridge in the unit with the keyed corner facing the upper left corner of the unit and the write protect tab on the back right The cartridge only fits in one orientation Push the cartridge gently into the unit until it is locked in place with a clicking sound Unloading the Cartridges Eject Button Activity LED Wait until the cartridge Activity LED is off Then push the Eject Button When the cartridge has been ejected grasp the exposed sides of the cartridge and pull the cartridge out Store in its container TANDBERG DATA Eject Button Power LED The Eject Button is illuminated by a Power LED The table describes the operation of this LED LED Status Meaning Description Off No Power Unit does not have power On Green Ready Power is On and the unit is working properly Blinking Green Ejecting Unit is rejecting the cartridge On Amber Fault Unit has detected a fault condition For more information run a diagnostic application Blinking Prevent Host computer is accessing the Amber media and the user has pressed the Eject Button The unit will eject the cartridge after the Host access completes Activity LED The Activity LED displays current cartridge status The table describes the operation of this
Download Pdf Manuals
Related Search