Samsung SyncMaster 204BM
Contents
1. Install drivers Install programs Pp ae Windows gt p M Natural Color gt p Mgeta MagicTune bb O MagicRotation SyncMaster 204BM The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement EE Aa Introduction Setup Adjusting Your Monitor Troubleshooting Specifications E Information Notational Power Installation Clean Others l Notational Please read the following safety instructions as they are designed to prevent damage to property and harm to the user cA Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment gt w Notational Conventions Prohibited Important to read and understand at all times Do not touch Ground to prevent an electric shock Do not disassemble Disconnect the plug from the outlet O Notational Power Installation Clean Others Power When not used for an extended period of time set your computer to DPM If using a screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions 2 Do not use a damaged or loose plug e This may cause electric shock or fire 2 Do not pull the plug out by the wire nor touch the plug w2. 2 The installation of the bracket must be done by a qualified professional e Installing the bracket by unqualified personnel may result in injury e Always use the mounting device specified in the owner s manual 2 When installing the product make sure to keep it away from the wall more than 10 cm 4 inches for ventilation purposes e Poor ventilation may cause an increase in the internal temperature of the product resulting in a shortened component life and degraded performance Keep the plastic packaging bag out of children s reach e The plastic packaging bag may cause suffocation if children play with it Notational Power Installation Clean Others Clean When cleaning the monitor case or the surface of the TFT LCD screen wipe with 1 a slightly moistened soft fabric 2 Do not spray water or detergent directly onto the monitor e This may cause damage electric shock or fire 2 Use the recommended detergent with a smooth cloth 2 If the connector between the plug and the pin is dusty or dirty clean it properly using a dry cloth e A dirty connector may cause electric shock or fire Make sure to unplug the power cord before cleaning the product e Otherwise this may cause electric shock or fire 2 Unplug the power cord from the power outlet and wipe the product using a soft dry cloth e Do not use any chemicals such as wax benzene alcohol thinners insecticide air freshener lu
3. 9 Click Finish 10 When the installation is complete the MagicTune executable icon appears on your desktop Double click the icon to start the program Hi MagicTune execution icon may not appear depending on specification of computer system or monitor If that happens press F5 Key if Ture P Se EE SURE TETE EE EE EKLE LALALALA K Installation Problems The installation of MagicTune can be affected by such factors as the video card motherboard and the network environment D System Requirements Os e Windows 2000 e Windows XP Home Edition e Windows XP Professional TOTO LOTOCECCOTOLOCOTCOTOTCOTOTOT OCT CT TOTO LELOCOC EEOC ECO COTO AA eT eT eee CeCe Tere rere eLere rere rere EE It is recommended using MagicTune in Windows 2000 or A later TOTO TOTOCECCCOLOTOTOTOTOTOTerer ra T FEFEFE SSS SSS SSS SPSS RERE PSSST PSPSPS PSPSPS PSSST SE SPSS PCPS SS EFE Hardware e 32 MB Memory above e 60 MB Hard disk space above For more information visit the MagicTune website Uninstall The MagicTune program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MagicTune 1 Goto Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add or Remove Programs icon in Control Panel 3 Inthe A
4. Please change to the recommended mode during this one minute period The message is displayed again if the system is rebooted The monitor is in PowerSaver mode press a key on the keyboard to activate the monitor and restore the image on the screen If there is still no image press the Enter Source button Then press any key on the keyboard again to activate the monitor and restore the image on the screen You may get a blank screen if you boot the system before you connect the DVI cable or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals Connect the DVI cable and then reboot the system Unlock the OSD by pressing the MENU button for at least 5 seconds Check the signal cable connection Make sure the video card is fully inserted in it s slot Reboot the computer Set the video card by referring to the video card manual Adjust screen image position and size using the OSD Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD Have you adjusted the resolution or frequency on the monitor Is the frequency properly adjusted when checking the Display Timing on the menu Adjust the resolution and frequency of the video card Refer to the Preset Timin
5. T i wen Use this button for open the on screen menu and exits from the menu screen or closes screen adjustment menu 174 These buttons allow you to adjust items in the menu Press this button to Activates a highlighted menu item AUTO Press this button to self adjust to the incoming Analog signal Available in Analog mode only The values of fine coarse and position are adjusted automatically User Control Buttons Direct Functions OSD Functions sbay MagicTune Q MagicRotation AUTO Description When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming Analog signal The values of fine coarse and position are adjusted automatically Available in Analog mode only To make the automatic adjustment function sharper execute the AUTO function while the AUTO PATTERN is on If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy If you change resolution in the control panel auto function will be executed automatically OSD Lock 8 Unlock gt gt When pressing the AUTO button after locking the OSD Locked Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Lock Hold down the menu button for more than five
6. consequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty What is Image retention During normal operation of a LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas o
7. 087 66 667 74 551 75 062 72 809 75 000 56 250 60 317 72 188 75 000 60 004 70 069 75 029 75 000 60 000 75 025 60 000 Horizontal Frequency Pixel Clock MHz 25 175 25 175 28 322 30 240 57 284 100 000 31 500 31 500 36 000 40 000 50 000 49 500 65 000 75 000 78 750 108 000 108 000 135 000 162 000 Sync Polarity H V The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz E Safety Instructions E Introduction E Setup The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement Contact SAMSUNG WORLDWIDE Terms Contact SAMSUNG WORLDWIDE E Adjusting Your Monitor Troubleshooting E Specifications For Better Display Authority Correct Disposal CO If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADO
8. If the monitor and the computer are connected you can turn them on and use them K v Cable Fix Ring When connecting the cable is finished fix the cables to the Cable Fix Ring Connecting the Monitor Using the Stand eae TT a Installing the Monitor Driver Natural Color Automatic Manual Using the Stand Removing the base m HUL 4 HAS Stand Turn off your monitor and unplug its power cord 2 Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen 3 Remove screws A and then remove the Stand from the LCD monitor Swivel stand Using You can swivel the monitor left and right at an angle of 350 to set the monitor lengthwise The rubber under the stand is to avoid the monitor slide When you try to rotate the monitor in the state of the power cord or cable connecting to the monitor the power cord of cable can be destroyed Tilt angle x Using You can adjust the tilt anlgle within a range of 5 1 0 forward to 17 1 0 backward for the most comfortable viewing angle Pivot Stand HAS Stand A Stand Stopper Tara wu The Auto Rotation may not be supported depend on the monitor model ats If you rotate the screen without lifting it to its maximum height the screen may be damaged because the edge of the screen would hit the floor Attaching a Base This monitor accepts a 100 mm x 100 mmVESA
9. Manual CD into your CD ROM drive 2 Click Start and Control Panel Then double click on Appearance and Personalization 2 a g bs LO a Mg DW gj mo 3 Click Personalization and then Display Settings bm ie ee ai lamya aa tS ee BEN a ee oe eee ee er ee ese pee Pa ima saran ay ee a Tas NG bye p pime a apa ee ee G pa km ki m gt iian ii a ag ap L muger ar ee ee e ee a im pa ee ee ee ee R T ba er ma mem eer ee oe 4 Click Advanced Settings L ltp Meriter ba PENA Gohirio big LE Hierin Corp to Color Hh aghast GAP bat 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below BO Hat a peje eh a a ALA ay Gearing Bin check bem kios you ko ale day moda Fat Ha al Continue meat cannot dapi cinei y Thee imiy lead 69 an usable apa alio gamed hor ghar p This monitor driver is under certifying MS logo and this installation doesn t Pani damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com rar NG ee rete Dia typo Hiiri ed E ET Seated mier aial Laranor an ADA Gece KONO LE iieri Gorges Geaa in a z p ri nee sin To waaa daimiu ghoul Sha ceiver flies To updater hag
10. and the position of the monitor may influence the quality and other features of the monitor 1 If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room 2 Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor Useful Tips e Amonitor recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the monitor to become blank have poor coloring become noisy and video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer e Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1600 X 1200 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on o If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition o In this case check the computer for trouble The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Safety Instructions E Introduction Setup E Adjusting Your Monitor E Troubleshooting Seite wichita E Information General PowerSaver Preset Timing Modes Ge
11. compatiblity wath windows XP Te thes besing is imputar Continuing your installation of this software may impair or destabilize the conect operation of your system ether immediately of in the future Mictozoall strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing This monitor driver is under certifying MS logo and this installation don t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 5 Monitor driver installation is completed Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual ai Installing the Monitor Driver Manual Windows Vista Windows XP Windows 2000 Windows ME Windows NT Linux CO When prompted by the operating system for the monitor driver insert the CD ROM Ka included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China 9 Microsoft Windows Vista Operating System 1 Insert your
12. of fine coarse and position are adjusted automatically Available in Analog mode only gt gt Click here to see an animation clip 6 Power button Use this button for turn the monitor on and off Power indicator This light glows Blue during normal operation and blinks Blue once as the monitor saves your adjustments Headphone connection terminal n x See PowerSaver described in the manual for further information regarding power saving CA functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Unpacking Front Rear Rear The configuration at the back of the monitor may vary from product to product HAS Stand 1 POWER ON OFF Switch Use this button for turn the monitor on and off 2 POWER port Power cord plugs into monitor and wall receptacle 1 POWER DVI IN port Connect the DVI Cable to the DVI IN port on the back of your monitor SOURCE Digital RGB IN port Connect the signal cable to the RGB IN port on the back of your monitor SOURCE Analog h pm J ate ME 3 RGB IN Ps R Kensington Lock The Kensington lock is a device used to physically fix the system to something when using it in a public place The locking device has to be purchased separately For using a locking device contact the place of purchase Stand Stopper Remove the fixing pin on the stand to lift the monitor u
13. only Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal
14. seconds to activate the OSD adjustment lock function Unlock Hold down the menu button for more than five seconds to deactivate the OSD adjustment lock function Though the OSD adjustment lock function is activated you can still adjust the brightness and contrast and adjust MagicBright using the Direct button MagicBright Description Push the MagicBright button to circle through available preconfigured modes Seven different modes Custom Text Internet Game Sport Movie Dynamic Contrast MagicBright Volume Menu Description Volume When OSD is not on the screen push the button to adjust volume O SOURCE Menu Description SOURCE Selects the video signal while the OSD is off User Control Buttons Direct Functions OSD Functions sbay MagicTune CJ MagicRotation EI Picture Brightness MagioColor Color Control E image Coarse Fine Sharpness H Position V Position M osp Language H Postion VPostion Transparency Display Time IM Setup Auto Source mage Reset Color Resa O Information O Picture F Menu Brightness Contrast Description You can use the on screen menus to change the brightness according to personal preference MENU gt iH gt H gt a gt MENU You can use the on screen menus to change the contrast according to personal preference MENU gt H gt a gt E gt a MENU Play Stop Menu De
15. the monitor with a soft case LCD Panel cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor Check List Q amp A Self Test Feature Check Self Test Feature Check Self Test Feature Check Warning Messages Environment Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly O Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly Warning Messages If there is something wrong with the input signal the message below appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Not Optimum Mode Recommended Mode 1600 X 1200 60Hz Environment The location
16. to do so may cause serious damage to your monitor Place your monitor in a location with low humidity and a minimum of Se nA Lee dust ETER ra a Pi Ng e Failure to do so may cause electric shock or fire inside the monitor Do not drop the monitor when moving it e This may cause damage to the product or the person carrying it Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf e Dropping the product may cause damage to the product or the person carrying it 4 2 Do not place the product on an unstable or small surface area ANQ e Place the product on an even and stable surface as the product may fall Ki and cause harm to someone walking by specifically children 2 Do not place the product on the floor e Take care as someone specifically children may trip over it 2 TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES e Otherwise this may cause fire 2 Keep any heating devices away from the power cable e A melted coating may cause electric shock or fire 2 Do not install the product in places with poor ventilation for instance a bookshelf closet etc e Any increase in the internal temperature may cause fire 2 Put down the monitor carefully e Failing to do so may damage the monitor 2 Do not place the monitor face down e This may damage the TFT LCD surface
17. 5 3260 SAMSUNG 7267864 0 15 min 01805 121213 0 14 Min 06 80 SAMSUNG 7267864 800 SAMSUNG 7267864 0032 0 2 201 24 18 0900 20 200 88 0 10 Min 815 56 480 0 801 801 881 80 8 200 128 0818 717 100 0800 SAMSUNG 7267864 902 10 11 30 0771 400 200 0800 7267864 0870 SAMSUNG 7267864 800 7267 800 7267 8 800 77777 8 800 080 1188 8 800 200 0400 8 800 502 0000 140 1234 Asia Pacific 1300 362 603 800 810 5858 010 6475 1880 3698 4698 3030 8282 1800 1100 11 0800 112 8888 0120 327 527 1800 88 9999 http www samsung com dk http www samsung com fi http www samsung com fr http www samsung de http www samsung com hu http www samsung convit http www samsung lu http www samsung com nl http www samsung com no http www samsung com pl http www samsung com pt http www samsung com uk http www samsung com sk http www samsung com es http www samsung com se http www samsung com ch http www samsung com uk http www samsung ee http www samsung com lv http www samsung It http www samsung kz http www samsung ru http www samsung com ur http www samsung uz http www samsung com au http www samsung com cn http www samsung com hk http www samsung com in http www samsung com id http www samsung com jp http www samsung com my PHILIPPINES 1800 10 SAMSUNG 7267864 http www samsung com ph SINGAPORE 1800 SAMSUNG 72678
18. 64 http www samsung com sg THAILAND 1800 29 3232 02 689 3232 http www samsung com th TAIWAN 0800 329 999 http www samsung com tw VIETNAM 1 800 588 889 http www samsung com vn Middle East amp Africa SOUTH AFRICA 0860 7267864 SAMSUNG http www samsung com za U A E 800SAMSUNG 7267864 8000 4726 http www samsung com mea Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal Terms Q Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance between two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Interlace and Non Interlace Methods Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Inte
19. Ganang Iha Gaa aa aaral ba iba Me Ha Dai Madel Samsung sasa dih Thi ceiver in mot digitally signas Ialma rim dia anna imba Leet VC tet cao 8 If you can see following Message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou are installing for this hardware Samsung saa has not passed Windows Logo bezting lo wenly its compabbdiy wh ino PP Doll ma sbe Dh bagting is raped Continuing yout installation of this software mag impii or destabilize the corect operation of your system either immediately of m the future Microsoft strongly recommends thal pow Hop hit installation now and monbact the hardware vendor for aolteware that haz passed Windows Loge testing Continue Areway This monitor driver is under certified MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 9 Click the Close button then click OK button continually 10 Hardyearo Update Wizard Completing the Hardware Update Wizard The vated kant feted rth the oeri koi Earisung saan ni Plog and P loy Monitor and A Prophet NI Proporta Ci ones al Cave a Samgung aiii eE e 87 122001 10an Pii fg phg Dover Dalada To vira dekada abo tho dre hlos To jana ih dare la tree Auna Bol Back Driver if ce coma fads after updlaling thee drives rol back bo ina
20. Ger sai Ll ery gel Te minaali the dre Advanced Monitor driver installation is completed 9 Microsoft Windows 2000 Operating System DO ed CO When you can see Digital Signature Not Found on your monitor follow these steps Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install Click Start Setting Control Panel Double click the Display Icon Choose the Settings tab and then click Advanced Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Casez2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Wi
21. R GUATEMALA JAMAICA PANAMA PUERTO RICO REP DOMINICA TRINIDAD 8 TOBAGO VENEZUELA North America 1 800 SAMSUNG 7267864 1 800 SAMSUNG 7267864 01 800 SAMSUNG 7267864 Latin America 0800 333 3733 4004 0000 800 726 7864 SAMSUNG 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 1 800 234 7267 800 7267 1 800 682 3180 1 800 751 2676 1 800 7267 864 0 800 100 5303 http www samsung com http www samsung com ca http www samsung com mx http www samsung com ar http www samsung com br http www samsung com cl http www samsung com co http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin Europe Information BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL REPUBLIC OF IRELAND SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN RUSSIA UKRAINE UZBEKISTAN AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA 02 201 2418 844 000 844 Distributor pro Ceskou republiku http www samsung com be http www samsung com cz Samsung Zit Ceska organiza n slo ka yskocilova 4 14000 Praha 4 70 70 19 70 030 6227 51
22. a tions are subject to change without prior notice for reasons of performance enhancement E Safety Instructions la R uA E Setup E Adjusting Your Monitor E Troubleshooting E Specifications E Information Unpacking Front Rear Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking 3 Without Stand Monitor 2 With Stand HAS Stand 2 Manual o ZI Quick Setup Guide User s Guide Monitor Driver Natural Color MagicTune MagicRotation software Warranty Card Not available in all locations Cable D Sub Cable Power Cord Audio Cable 2 Sold separately kl DVI Cable Set Bracket Screws 4 EA Unpacking Front Rear Front v amp OB fh MENU button 2 FA MagicBright button 1 4 E Volume button tt 213 Adjust buttons Opens the OSD menu Also use to exit the OSD menu or return to the previous menu MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently seven different modes are available Custom Text Internet Game Sport and Movie Dynamic Contrast Each mode has its own pre configured brightness value You can easily select one of seven settings by simply pressing MagicBright control button 1 Custom Although the values are care
23. ackground of the OSD a9 MENU gt a gt H gt a T gt E gt gt MENU The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it Q Q is turned off MENU gt a gt H gt a gt E gt gt MENU Setup M Menu Auto Source Image Reset Color Reset Description Play Stop Select Auto Source for the monitor to automatically select the signal source Q Q MENU gt gt E gt E gt a MENU Image parameters are replaced with the factory default values Q Q MENU gt a gt 4 gt a T gt El gt MENU Color parameters are replaced with the factory default Q Q values MENU gt a gt El gt a T gt gt MENU O Information Menu Description Shows a video source display mode on the OSD screen Information MENU gt a gt MENU mdercTune HELP S Installation 1 Insert the installation CD into the CD ROM drive 2 Click the MagicTune installation file 3 Select installation Language Click Next 4 When the Installation Shield Wizard window appears click Next 5 Select I agree to the terms of the license agreement to accept the terms of use 6 Choose a folder to install the MagicTune program 7 Click Install 8 The Installation Status window appears
24. as horizontal stripes If the noise persists even after fine tuning repeat it after adjusting the Fine frequency clock speed Q Q Available in analog mode only MENU gt a gt E gt a T gt E gt gt MENU Changes the clearance of image Sharpness Q Q MENU a gt H gt a gt E gt a 1 9 MENU Changes the horizontal position of the monitor s entire display H Position Available in analog mode only MENU gt gt El gt a T gt El gt gt MENU Changes the vertical position of the monitor s entire display V Position Available in analog mode only Q Q MENU gt a ro E gt a T gt H gt gt MENU Menu Description Play Stop You can choose one of nine languages English Deutsch Espa ol Francais Italiano Svenska Language Pycckm Portugu s T rk e Q Q Note The language chosen affects only the language of the OSD It has no effect on any software running on the H Position V Position Transparency Display Time computer MENU gt gt H gt Ej gt a gt MENU You can change the horizontal position where the OSD menu appears on your monitor Q Q MENU gt a gt H gt a gt E gt gt MENU You can change the vertical position where the OSD menu appears on your monitor Q Q MENU gt a gt H gt a gt E gt a gt MENU Change the transparency of the b
25. association with Korea Electronics amp Telecommunications Research Institute ETRI This is only available for Samsung monitors and ensures that the color of the images on the OT monitor are the same as the printed or scanned images For more information refer to Help F1 in the software program Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD ROM Drive The initial Natural Color screen will appear Click on Natural Color in the startup window to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Windows Start button select Run Enter D color NCProsetup exe and then press the lt Enter gt key If the drive where the CD is inserted is not D enter the applicable drive Uninstalling the Natural Color Software Program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button The color and appearance of the product may wary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Safety Instructions E Introduction Setup cla Troubleshooting Specifications E Information User Control Buttons Direct Functions OSD Functions p MagicTune CHMagicRotation
26. bricant or detergent 2 Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year p a t es e Keep the product s interior clean Dust which has accumulated in the ah ae interior over an extended period of time may cause a malfunction or fire Notational Power Installation Clean Others Others 2 Do not remove the cover or back e This may cause electric shock or fire e Refer to a qualified servicing company 2 If your monitor does not operate normally in particular if there is any unusual sound or smell coming from the monitor unplug it immediately and contact an authorized dealer or the Service Center e This may cause electric shock or fire 2 Keep the product away from places exposed to oil smoke or moisture do not install inside a vehicle e This may cause a malfunction electric shock or fire e In particular avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain 2 If the monitor is dropped or the casing is damaged turn the monitor off and unplug the power cord Then contact the Service Center e The monitor may malfunction causing electric shock or fire 2 Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time e Failure to do so may cause electric shock or fire 2 Do not try to move the monitor by pulling only the wire or the signal cable
27. complete the MagicRotation executable icon appears on your desktop 0 WagicRotation Installation Problems The installation of MagicRotation can be affected by the factors such as video card motherboard and the network environment Limitation The Display Driver should be properly loaded for the MagicRotation to work properly The installed Display Driver should be the latest driver supplied by the vendor If some applications like Windows Media Player Real Player etc are not displaying movie files properly in 90 180 and 270 orientations then do the following o Close the application o Select the Orientation 90 180 270 you want to view the application o Relaunch the application In most cases this should fix the problem User Applications using OpenGL and DirectDraw 3D drawing will not function as per the orientation mode selected 90 180 270 e g 3D games DOS based applications in Full Screen Mode will not function as per the orientation mode selected 90 180 270 Dual is not supported in Windows 98 ME NT 4 0 MagicRotation does not provide support for 24 bits per pixel Bit depth Color Quality If you are changing your Graphic Card it is recommended that you uninstall the MagicRotation Software before doing so System Requirements OS e Windows 98 SE e Windows Me Windows NT 4 0 Windows 2000 Windows XP Home Edition Windows XP Professional Hardware e 128MB Memory abov
28. compliant mounting interface pad HAS Stand A Monitor B Mounting interface pad Sold separately Turn off your monitor and unplug its power cord 2 Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen 3 Remove screws and then remove the Stand from the LCD monitor 4 Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm type base wall mount hanger or other base e Do not use screws longer than the standard dimension as they may damage the inside A of the Monitor e For wall mounts that do not comply with VESA standard screw specifications the length of the screws may differ depending on their specifications e Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions To mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface Contact the nearest Samsung Service Center for more information Samsung Electronics will not b
29. dd or Remove Programs screen scroll down to find MagicTune Click on it to highlight it 4 Click the Change Remove button to remove the program Click Yes to begin the uninstall process 6 Wait until the Uninstall Complete dialog box appears MI Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades The MagicTuneT program is an additional program for monitor products Some computing systems that install either an older or the latest video driver are not compatible with MagicTungT Please visit the Magicline Website for technical support for MagicTungT Specifications subject to change without notice Magictune is a trademark of SAMSUNG ELECTRONICS CO Inc Windows js 4 registered trademark of Microsoft Corp Other trademarks are property of their respective holders DD MagicRotation Help O Installation P wW N D Y 10 Insert the installation CD into the CD ROM drive Click the MagicRotation installation file Select installation Language Click Next When the InstallShield Wizard window appears click Next Select I accept the terms of the license agreement to accept the terms of use Choose a folder to install the MagicRotation program Click Install The Setup Status window appears Click Finish Have to reboot the system in order for the MagicRotation to work properly When the installation is
30. e This may cause a breakdown electric shock or fire due to damage to the cable 2 Do not move the monitor right or left by pulling only the wire or the signal cable e This may cause a breakdown electric shock or fire due to damage to the cable Do not cover the vents on the monitor cabinet e Bad ventilation may cause a breakdown or fire 2 Do not place water containers chemical products or small metal objects on the monitor e This may cause malfunction electric shock or fire e f a foreign substance enters the monitor unplug the power cord and contact the Service Center 2 Keep the product away from combustible chemical sprays or inflammable substances e This may cause an explosion or fire J 2 Never insert anything metallic into the monitor openings HE e This may cause electric shock fire or injury 2 Do not insert metal objects such as chopsticks wire and tools or inflammable objects such as paper or matches into the vent headphone port or AV ports or etc e This may cause electric shock or fire If an alien substances or water enters the product turn the product off unplug the power connector from the wall outlet and contact the Service Center 9 When viewing a fixed screen for an extended period of time residual image or blurriness may appear e Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time 2 Adju
31. e recommended e 25MB Free Hard disk space above Service Packs e It is recommended that your System has the latest Service Pack installed e For Windows NT 4 0 it is recommended to install Internet Explorer 5 0 and above with Active Desktop component For more information visit the MagicRotation website Windows is registered trademark of Microsoft Corporation Inc O Uninstall The MagicRotation program can be removed only by using the Add Remove Programs option of the Windows Control Panel Perform the following steps to remove MagicRotation 1 Goto Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add Remove Programs icon in Control Panel 3 In the Add Remove Programs screen scroll down to find MagicRotation Click on it to highlight it 4 Click the Change Remove button to remove the program 5 Click Yes to begin the uninstall process 6 Wait until the Uninstall Complete dialog box appears 7 After uninstall restart the system to complete the uninstallation Visit the MagicRotation website for technical support for MagicRotation FAQs questions and answers and software upgrades Windows is registered trademark of Microsoft Corporation Inc The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change
32. e responsible for damages caused by using a base other than those specified e Please use Wall Mount according to the International standards gt Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the a rae Natural Color Automatic Manua Installing the Monitor Driver Automatic x When prompted by the operating system for the monitor driver insert the CD ROM a included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button 0 SAMSUNG monitor installer Select the display adapter on which you want io imal the maning h RADE DH 9550 Plug and Fine igri Salet the maraba ahich you y bo eal 4 If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP Operating System Hardware Installation The software pou ane mabaling foo this hardware Samsung aoe has not passed Windows Logo besting to werily its
33. ecute X Window you need to make the X86Config file which is a type of system setting file Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window 10 You have finished setting up your monitor Execute X Window after setting other requested hardware Hp o NG LG o po Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Col Automatic Manual Natural Color Natural Color Natural Color Pro color management system Monitor Color Cal amp Profiling Preference tt Copyrgbig 2003 Samsung Electranics Ca Ltd One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in
34. f the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if the installed the adapter video driver and the monitor driver 4 Check if the scanning ratio of the video screen is set to between 56Hz 75Hz Do not exceed 75Hz when using the maximum resolution 5 If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter in the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver _ CV Li If problems repeatedly occur contact an authorized Service Center Check List Q amp A Self Test Feature Check Q amp A Question Answer How can change the The frequency can be changed by reconfiguring the video card frequency Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can adjust the resolution Windows ME XP 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving Windows ME XP 2000 Set the function in the BIOS SETUP of function the computer or the screen saver Refer to the Windows Computer Manual How can clean the outer Disconnect the power cord and then clean
35. f the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention Power Off Screen Saver or Power Save Mode Ex e Turn the power off when using a stationary pattern Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use e Use a Screen saver if possible Screen saver in one color or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recommend that you follow set up of your display system program as below Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 Type 1 FLGHT TIME OZ348 20 30 FLGHT TIME Bel 20 30 UA102 21 10 lt UA102 21 10 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference
36. from the accumulated dirt or T degraded insulation causing electric shock or fire 2 Do not place your children s favorite toys or any other objects of interest O lt a gt on the product 4 IN Ao JN e Children may try to climb on the product to retrieve an object The A product could fall causing injury or even fatality 9 When lifting up or moving the monitor do not lift the monitor upside a down while holding only the stand Daga e This may cause your monitor to fall and become damaged or cause a lt r personal injury Good Postures When Using the Monitor Try to maintain a good posture when using the monitor Keep your back straight Keep a distance of about 45 50 cm between your eyes and the monitor screen Look at the screen from slightly above it and have the monitor directly in front of you e Tilt the monitor upwards by 10 20 degrees Adjust the monitor height so that the top of the monitor is slightly below eye level e Adjust the monitor angle so that there is no reflected light on the screen Try to maintain your arms perpendicular to your armpits Keep your arms level with the back of your hands Keep the angle of the elbow perpendicular Keep the angle of the knees at more than 90 degree Do not let your feet fall up from the floor Adjust the arm position so that it is below the heart The color and appearance of the product may vary depending on the model and the product specific
37. fully chosen by our engineers the pre configured values may not be comfortable for your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu 2 Text For documentations or work involving a lot of text 3 Internet For working with a mixture of images such as text and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD 7 Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast gt gt Click here to see an animation clip When OSD is not on the screen push the button to adjust volume Adjust items in the menu 1 4 O Enter button Activates a highlighted menu item Source button Push the then selects the video signal while the OSD is off When the source button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode Analog or Digital input signal Note If you select the Digital mode you must connect your monitor to the graphic card s DVI port using the DVI cable 5 AUTO button When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming Analog signal The values
38. g Modes Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product There are only 16 colors shown on the screen The screen colors have changed after changing the video card There is a message that reads Unrecognized monitor Plug amp Play VESA DDC monitor found Problems related to Audio Check when MagicTune does not function properly MagicTune doesn t work properly vi an HA Have the Windows colors been set properly Has the video card been set properly Have you installed the monitor driver See the video card manual to see if the Plug 8 Play VESA DDC function can be supported No sound Sound level is too low MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play Have you changed your PC or video graphic card Did you install the program Windows ME 2000 XP Set the colors properly at the Control Panel Display gt Settings Set the video card by referring to the video card manual Install the monitor driver according to the Driver Installation Instructions Install the monitor driver according to the Driver Installation Instructions Ensure that the audio cable is firmly connected to both the audio in port on your monitor and the audio out port on your sound card Refer to Con
39. graer mee How hn danica Ea drvca eh ofa eat Bhp Spr roll BEOR NG a pemu maa Ces inaina fe gated ai j Tauningal Fa diar Abaca 7 Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer Hagar O AU A MCA ka Gere paan Tamh m chow aala Ba i id Search sutomatiially tee epdated driver pitani area AN a mial Bn Feras Pees Ber Lebel feeds iat Paa ae eee LF petal naina La man pick trom a lint of device Grivert on niy Computer ra Bi al an ra dere ka paa a kar sere aril all deer kaaa r jbr ipnr gery ee re 8 Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Splet the divans direst buan ln bal Pee thig hanan Pa mar ieee ra Hala ch rin sa wa grr ngaa Pipa Eara ilan Pol lean Pa a piy i ia ree Ze Sika Hina 9 Select the model that matches your monitor from the list of monitor models on the Screen NG click Next Sele the naton driver you ward te inpiall fee this hardware ge hereto rv waka en aa Fp pt aa re dok 10 Click Close Close OK OK on the following screens displayed in oon x Sarbung Ta haan as ad Pa ee His oni cannot display correctly This may lead to an unusable Microsoft Windows XP Operating System 1 Insert CD into the CD ROM driver 2 Click Start 5 C
40. he login screen does not appear contact the Service Center or your dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly If the display exceeds SXGA or 60 Hz a Not Optimum Mode Recommended Mode 1600 X 1200 60 Hz message is displayed If the display exceeds 85 cannot see the On Screen Display The screen shows strange colors or just black and white The screen suddenly has become unbalanced The screen is out of focus or OSD cannot be adjusted LED is blinking but no images on the screen There is no image on the screen Is the power indicator on the monitor blinking at 1 second intervals Is the monitor connected using the DVI cable Have you locked the On Screen Display OSD Menu to prevent changes Is the screen displaying only one color as if looking at the screen through a cellophane paper Have the screen colors become strange after running a program or due to a crash between applications Has the video card been set properly Have you changed the video card or the driver Have you adjusted the resolution or frequency to the monitor Hz the display will work properly but the Not Optimum Mode Recommended Mode 1600 X 1200 60 Hz message appears for one minute and then disappears
41. ically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problelms e For example the number of TFT LCD sub pixels contained in this product are 5 760 000 Note Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment General PowerSaver Preset Timing Modes PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility i
42. in luminance Black 4 White Grey Ex SYSTEM 245 e Recommended settings Bright colors with little difference in luminance Change the characters color and background color every 30 minutes Ex SYSTEM 245 SYSTEM 245 STATUS OK STATUS OK Every 30 minutes change the characters with movement AA Yc he PUYAT KA1710 12 00 KA1710 12 00 UA0110 13 30 PASIP 184 19 LIAN11N 12 2N AA0002 14 00 FA7777 14 15 2 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC ina pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Common Electrode ITO Black Matrix Color Filter Gate Pixel Electrode Storage Capacitor ITO Cs Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe
43. ith wet hands e This may cause electric shock or fire Use only a properly grounded plug and receptacle e An improper ground may cause electric shock or equipment damage Class Equipment only 2 Insert the power plug firmly so that it does not come loose e A bad connection may cause fire 2 Do not excessively bend the plug and wire nor place heavy objects upon them which could cause damage e This may cause electric shock or fire 2 Do not connect too many extension cords or plugs to one outlet e This may cause fire 2 Do not disconnect the power cord while using the monitor e A surge may be caused by the separation and may damage the monitor Fe oi 2 Do not use the power cord when the connector or plug is dusty e f the connector or plug of the power cord is dusty clean it with a dry cloth e Using the power cord with a dusty plug or connector may cause electric shock or fire 2 To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e This may cause electric shock or fire Notational Power Installation Clean Others Installation Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure
44. ndows Millennium Operating System ALO D MISON ma ma Click Start Setting Control Panel Double click Display icon Select the Settings tab and click Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System KHAN Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency CO If there is no Mode at All Display Modes select the level of resolution and vertical YM frequency by referring to the Preset Timing Modes in the user guide 2 Linux Operating System To ex
45. necting the Monitor Check the volume level Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel gt Performance and Maintenance gt System gt Hardware gt Device Manager gt Monitors gt After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune Download the latest program The program can be downloaded http www samsung com monitor magictune Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program a Visit our website and download the installation software for MagicTune MAC 7 Check the following items if there is trouble with the monitor Check if the power cord and the video cables are properly connected to the computer 2 Check i
46. neral General Model Name SyncMaster 204BM LCD Panel Size 20 inch 51 cm Display area 408 0 mm H x 306 0 mm V Pixel Pitch 0 255 mm H x 0 255 mm V Synchronization Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 7M Resolution Optimum resolution 1600x1200 60 Hz Maximum resolution 1600x1200 60 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Separate H V sync Composite sync SOG Option TTL V high 2 2 0V V low s 0 8V Maximum Pixel Clock 165 MHz Power Supply AC 100 240 V 10 50 60 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions WxHxD Weight 444 x 362 x 74 5 mm 17 5 x 14 3 x 2 9 inch Without Stand 444 x 411 3 x 200 8 mm 17 5 x 16 2 x 7 9 inch With Stand 5 6 kg 12 3 Ibs VESA Mounting Interface 100 mm x 100 mm For use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Speaker 1WX2 Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automat
47. nstalled on your computer to set up this feature Power off EPA ENERGY 2000 State Normal Operation Power saving mode Power Indicator Blue Blue Blinking off Power Consumption Less than 45 watts Less than 1 watts Less than 1 watts This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality As an ENERGY STAR Partner SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR Preset Timing Modes PowerSaver Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Table 1 Preset Timing Modes Display Mode MAC 640X480 IBM 640 x 480 IBM 720 x 400 MAC 640 x 480 MAC 832 x 624 MAC 1152 x 870 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA 1152 x 864 VESA 1280 x 960 VESA 1280 x 1024 VESA 1600 x 1200 Horizontal Frequency kHz 31 469 31 469 31 469 35 000 49 726 68 681 37 861 37 500 35 156 37 879 48 077 46 875 48 363 56 476 60 023 67 500 60 000 79 976 75 000 Vertical Frequency Hz 70 086 59 940 70
48. ontrol Panel then click the Appearance and Themes Icon Bes pls ta Ha o WG Poe Gta T a f e Ibe rrr Bae eer iw infer Caper mr wp Eaman Ee ye Boece aaa sko appre F giy Peye EFi Eun m u HET 0 0 E5 Pete Peasair Fiy fo caw er E5 daid a anan maga Gb Hola and Support RE Kun lamh Agana hb ed inalis Kamang pa Feeds od tress ll Qm OB Pee Emm T Diay Fiap one Moy biorda core IG Pre ili Gian iha o Gokua paling Lase More Higher 32 kat TOZA by TEN parola a aa wan ee Pha ard Plage Moda Device hpa Mordora Mamalachuer Standard montor types Locmor on SD Fiogiat ll DI Denice ala This dlewasa ja sarkig popar Cheii this check bos allows you lo select diiplay modes that this Ne ata Kaning problems with thes denice click Ticublsshod to ala ac nu Domeij This may kad bo an umunable dieplay uhat tha d m 5 Click Update Driver and select Install from a list or then click Next button Pligg and Play Monitor Proper lis Dera Durer eA Fhag arni Fisy ction Dima Provis Dries Pako Dinam ejan Digtal Sipra Pol Back Driver Direnni i 6 Hardware Update Wizard Hicroentt eee 7 cae Mieco ios SOP Pablo Fo vey eile allel ee hja Naa To miya aa ee daya IP ihe desa ais aier upsir Hee dina poll bak bo iho piaia maa i Te well es da hora este chocce gma ceanch and inalallabon opine iesch iy
49. p and down Cable Fix Ring When connecting the cable is finished fix the cables to the Cable Fix Ring AUDIO IN Connect the audio cable for your monitor to the audio port on the back of your computer A See Connecting the Monitor for further information regarding cable connections The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Safety Instructions E Introduction E Adjusting Your Monitor Troubleshooting E Specifications E Information Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Connecting the Monitor Rear of Computer Rear of Monitor New Model Macintosh Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet Use appropriate connection for your computer Using the D sub Analog connector on the video card Connect the signal cable to the 15 pin D sub port on the back of your monitor Al sees G RGB IN Using the DVI Digital connector on the video card Connect the DVI Cable to the DVI IN port on the back of your monitor a me DVI IN y Connected to a Macintosh Connect the monitor to the Macintosh computer using the D sub connection cable LO
50. ppear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problelms o For example the number of TFT LCD sub pixels contained in this product are 5 760 000 3 When cleaning the monitor and the panel outside please apply the recommended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you can have a stain on it 4 lf you are not satisfied with the picture quality you can get better quality of picture by performing the auto adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the FINE COARSE adjustment function 5 When viewing a fixed screen for an extended period of time residual image or blurriness may appear Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal Authority Information in this document is subject to change without notice 2007 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or
51. rlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs Plug amp Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically This monitor follows the international standard VESA DDC for the Plug amp Play function Resolution The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1600 X 1200 this means the screen is composed of 1600 horizontal dots horizontal resolution and 1200 vertical lines vertical resolution Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal For Better Display 1 Adjust computer resolution and screen injection rate refresh rate oncomputer as described below to enjoy the best quality of picture You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT LCD o Resolution 1600 X 1200 o Vertical frequency refresh rate 60 Hz 2 TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color a
52. scription Play Stop MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality 1 Off Returns to the original mode 2 Demo The screen before applying MagicColor Q Q appears on the right and the screen after applying MagicColor appears on the left 3 Full Displays not only vivid natural color but also more realistic natural skin color with clearness 4 Intelligent Displays vivid natural color with clearness MagicColor MENU gt gt H gt Ej gt a gt MENU The tone of the color can be changed and one of four modes can be selected Cool Normal Warm and Color Tone Custom Q Q MENU gt gt H gt a gt E gt gt MENU Adjusts individual R G B color balance 09 Color Control MENU gt gt H gt 4 T gt Hl gt a T gt gt a gt MENU Gamma correction changes the luminance of the colors with intermediate luminance Gamma j se gt Be e Mode 3 MENU gt a gt H gt a T gt gt t gt MENU O Image Menu Description Play Stop Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Q Q Coarse Available in analog mode only MENU gt a gt El gt 4 gt gt MENU Removes noise such
53. st the resolution and frequency to the level appropriate for the model e An inappropriate resolution may cause undesirable picture quality 20 inch 51 cm 1600 X 1200 2 Keep the volume at a comfortable level when using the headphones e Excessively loud volume level may damage hearing 2 Viewing the monitor continuously at a too close angle may result in damage to your eyesight To ease eye strain take at least a five minute break after every hour of using the monitor a 2 Do not install the product on an unstable uneven surface or a location t prone to vibrations e Dropping the product may cause damage to the product or the person carrying it Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire 9 When moving the monitor turn off and unplug the power cord Make sure that all cables including the antenna cable and cables NEE PAA connected to other devices are disconnected before moving the monitor pg C e Failure to disconnect cables may damage it and cause fire or electric Ga shock r 2 Place the product out of children s reach as they could damage by i hanging onto it a PW PAG TON kt e A falling product may cause injury to the person or even fatality a i 2 When not using the product for an extended period of time keep the product unplugged ee im e Otherwise this may cause heat emission
54. tha beet drea in these kesa Loe thee cheek baat balo ka lied ot apan the default search which includes bora pathi dr servers eis Thee bit dere land ball be thal GI Dont search wall choose the diver bo Fabal Chore this opion bo sieni the devine dra homa ki Wirde doss ment guaeeries that She dret pow chodia yall ba ha Beret matoh for pau hudas sge WC ppa cra Hardware Update Wizard Welcome ta the Hardware Update Wizard Thin waraed hepa pou natal oaiiame for Pig armel Play Morder EJ IF pour hasdwase come with an installation CD Cua ot Nopgp disk mga ob no bahat cha po ward He wae lo do 2 mil the nfhane gutortically Racommerded E imta eon a best ot peci koraban Ahad Did Het lo oombinus i Gees the manulactuier are modal of pour hadia diaa ond then chek Hasi pzu haaa dak that conina s dieser aaa ward lo inelall obk Hawa Cink 7 Bina gampahbla Paida Mode Ng Pinag and Pay Horio E Thi herent 1 ay nad Talma win diee mina iima CE a0 7 Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button install From Disk Inget the marulachuier s insbalabon dak ard then make sure thal the conect dime t selected below Copy manulactuser s Mes fom Hardware Update Wizard Selec the de diei you want to malal ka thin hide Seles the Mamubataor rd modal of pour kanaan dere are an cle Hood IF pee hana a dik Iha
55. without prior notice for reasons of performance enhancement E Setup E Safety Instructions E Introduction E Adjusting Your Monitor eile E Specifications E Information Self Test Feature Check Check List Q amp A x Before calling for assistance check the information in this section to see if you can remedy A any problems yourself If you do need assistance please call the phone number on the Information section or contact your dealer Symptom No images on Check List Is the power cord Solutions Check the power cord connection the screen connected properly and supply cannot turn on the monitor Can you see Check When connecting D Sub cable Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Not Optimum Mode Recommended Mode 1600 X 1200 60 Hz on the screen Check the signal cable connection When connecting DVI cable If you still see an error message on the screen when the monitor is connected properly check to see if the monitor status is set to analog Press Enter Source button to have the monitor double check the input signal source If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes Note If the initial screen t
Download Pdf Manuals
Related Search