Philips 40PFA4150 40" Full HD Black
Contents
1. Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries All other registered and unregistered trademarks are the property of their respective owners 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire e Never expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use ever place the TV remote control or batteries near naked flame or rather heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing To disconnect the TV from the mains power2. gap of at least 2 2 inches or 5 5cm between the back of the TV to the wall DN warning e Please follow all instructions provided with the TV mount TP Vision Europe B V bears no responsibility for improper TV mounting that results in accident injury or damage English Required Pixel Required Model No pitch mm Mounting Screws 40 100 x 200 4x M6 6 Troubleshooting This section covers common problems and their accompanying solutions General issues The TV cannot be switched on Disconnect the power cable from the power outlet Wait for one minute before reconnecting it Check that the power cable is securely connected The remote control is not working properly Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens The TV menu is in the wrong language Change the TV menu to your preferred language When turning the TV On Off or to Standby you hear a creaking sound from the TV chassis No action is required The creaking sound comes from the normal expansion and contraction of the TV as it cools down and warms up This does not impact its performance Channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected Pi
3. 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health 3 YourTV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome Control Panel J poo es RN e900900 1 Indicator Remote Control Sensor 2 Source display the list of signal sources S A 3 next channel 4 VoL switch to the previous 5 Menu 60 power supply please unplug the power turn on off the main menu turn on off the TV to cut off cable EN 5 increase reduce the volume Remote Control FORMAT INCR SURR NICAM SOURCE 6 K ee OPTIONS PHILIPS TELEVISION Power Standby button e After power up press it to turn on the TV e Press it again to switch to standby mode Menu Tum on off the menu English NICAM Switch between sound effects only available for TV signal sources that support NICAM function Source Select an input source for the TV iq gt m gt gt Shortcut keys in USB mode previous start pause stop next Options Access the optio
4. Register your product and get support at www philips com welcome NA User manual Panduan pengguna Panduan pengguna PHILIPS D WJ Environmental Protection Use Period This logo labelled on the product itself indicates that the Environmental Protection Use Period thereof is 10 years The Environmental Protection Use Period of electrical information products refers to the time period during which the toxic and hazardous substances or elements contained within the product will not leak or suddenly spoil and users of such products will not cause any serious environmental pollution or serious damage to human and property During the Environmental Protection Use Period please use this product according to the instructions given in this user manual The Environmental Protection Use Period does not cover consumable parts the battery Suggestive description of the Recycling Administrative Regulations for Waste Electrical and Electronics Products In order to care and protect the Earth in a better way please adhere to the national and applicable laws in relation to the recycling management of waste electrical and electronics products when the user no longer needs to use this product or when it has reached the end of its product life Contents 1 Caution 2 Important 3 Your TV Control Panel Remote Control Remote control usage 4 Use your TV Switch TV on or off Switch channels Watch connected devices A
5. V temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Example on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object To avoid deformations and color fading wipe off water drops as soon as possible Recycling ae Your product is designed and manufactured with high quality materials and components which can be recycled and reused E When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health a Your product contains batteries covered by the European Directive
6. age Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the surface Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support Educate children about the dangers of climbing on furniture to reach the TV English w Risk of swallowing batteries The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating e Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage ever place the TV or any objects on the power cord Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage e Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the T
7. comes from one speaker only Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Please note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e Ifthe TV does not recognise the HDMI device and no picture is displayed please try switching the signal source to another device before switching it back again f there are intermittent sound disruptions please check that output settings from the HDMI device are correct EN 11 Computer connection issues The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate Set the TV picture format to unscaled Contact us If you cannot resolve your problem please refer to the FAQs for this model at www philips com support If the problem remains unresolved please contact your local Philips Customer Service Centre Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty Note Please make a note of your TV model and serial number before you contact Philips Customer Service Centre These numbers are printed on the back bottom of the TV and on the packaging English
8. cture issues The TV is on but there is no picture Check that the antenna is properly connected to the TV Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set Poor TV reception from the antenna connection Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality f possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e Ifthe reception on one particular channel is poor please fine tune this channel There is poor picture quality from connected devices Check that the devices are connected properly e Check that the picture settings are correctly set The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Please check the signal output of the device Sound issues The pictures are showing but sound quality is poor EN 10 Check that all cables are properly connected Check that the volume is not set to 0 Check that the sound is not muted Check that the sound settings are correctly set The pictures are showing but sound
9. djust TV volume OSIS TA YM 5 Product information Display resolutions Multimedia Sound power Inherent resolution Tuner Reception Transmission Remote Control Power Supply Supported TV mounts NO O 0 0 00 1 0 CO OO 6 Troubleshooting General issues Channel issues Picture issues Sound issues HDMI connection issues Computer connection issues Contact us EN 1 English 1 Caution 20140 TP Vision Europe B V All rights reserved Specifcations are subject to change without notice Trademarks are the property of Koninklijke Philips N V or their respective owners TP Vision Europe B V reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than thosespecifiedherein confirmationoftheir validity and suitability must be obtained TP Vision Europe B V warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied TP Vision Europe B V cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Terms of warranty e Risk of i
10. ghts up press 5 Standby On on the remote control To switch to standby Press 5 Standby On on the remote control The standby indicator switches to lights up Tip Though your TV consumes very little power when in standby mode energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet Switch channels e Pres s CH on the remote con the ower right part of the TV rol or e Enter a channel number using the numeric buttons on the remote control Press gt on the remote control to switch and return to the previous channel Watch connected devices No te Switch on the device before selecting it as an external signal so urce Use the Source button D La a Ladi OPTIONS SLEEP EN 7 English Ww N Press SOURCE The source list appears Press AW to select a device Press OK to select The TV switches to the selected device Adjust TV volume IVA SOURCE CH To increase or decrease volume Press VOL at the lower right part of the TV or the Volume Control on the remote control To mute or unmute sound Press K Mute Pre
11. njury damage to TV or void of warranty Do not attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer e The caution sign printed on the back of he TV indicates risk of electric shock ever remove the TV cover Always contact Philips Customer Support for service or repairs CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO Any operation expressly prohibited in this EN 2 manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD LED product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Mains fuse 56 This TV is fitted with an app roved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover Copyright K
12. ns related to the current activity OK e In menu mode confirm the input or selection e In USB mode play pause AV 4P Navigation keys e In menu mode navigate the menu e InUSB mode press lt P to search forward or backward while playing music or video files Info Display the program information when available K Mute Mute or unmute the sound CH Switch to the previous next channel in IV mode amp Numeric keys 0 9 Select a channel or value O PICTURE Switch to the preset image mode 2 SOUND Switch to the preset audio mode Volume Increase reduce the volume D Return CH Switch Return to the previous channel Sleep Switch the TV to the standby mode when the preset time is out ED FORMAT Selectthe aspect ratio of image lt 3 Incredible Surround Enable or disable the virtual surround audio effect Remote control usage When you use the remote control hold it close to the TV and point it at the remote control sensor Make sure that the line of sight between the remote control and TV is not blocked by furniture walls or other objects EN 6 4 UseyourTV This section helps you perform basic TV operations Switch TV on or off 9900686 Standby indicator FORMAT INCR SURR IC SOURCE Me To switch on e Plug in the power plug If the standby indicator is li
13. ss aK again to restore the sound EN 8 5 Product information Product information is subject to change without notice For detailed product information please visit www philips com support Display resolutions Computer Formats e Resolution refresh rate 640 x 480 60Hz e 800 x 600 60Hz 024 x 768 60Hz 360 x 768 60Hz 920 x 1080 60Hz Video Formats e Resolution refresh rate e 480i 60Hz 80p 60Hz 576i 50Hz e 576p 50Hz e 720p 50Hz 60Hz e 1080i 50Hz 60Hz e 1080p 50Hz 60Hz Multimedia Supported storage device USB only FAT or FAT 32 USB storage devices are supported Compatiblemultimediafileformats Image JPEG Audio MP3 Video MPEG 2 MPEG 4 H 264 Sound power 40 6W x2 Inherent resolution lt 40 1920 x 1080 Tuner Reception Transmission Aerial input 75ohm coaxial IEC75 TV system PAL NTSC e Video playback PALINTSC SECAM Remote Control e Batteries 2 x AAA EN 9 Power Supply e Main Power Supply 100 240V 50 60Hz Standby Energy Consumption lt 0 5W Environment Temperature 5 40 C Power consumption 40 55W Supported TV mounts To mount the TV please purchase a Philips TV mount or any TV mount compliant with the VESA standard To prevent damage to cables and connectors be sure to leave a clearance
14. the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times EN 3 Risk of short circuit or fire Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 25 kg or 55 Ibs When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall hat can support the combined weight of he TV and wall mount TP Vision Europe B V bears no responsibility for improper wall mounting that results in accident injury or damage e Ifyou need to store the TV disassemble he stand from the TV Never lay the TV on its back with the stand installed Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Parts of this product may be made of glass Handle with care to avoid injury and dam
Download Pdf Manuals
Related Search