Legrand WSR320-S surge protector
Contents
1. 738 9721 1 009 456 0710 1 ue2. Ll legrand Wiremold Desktop Power Center INSTALLATION INSTRUCTIONS Installation Instruction No 1 009 456 August 2010 PART NUMBERS WSC320 S WSC400 S WSR320 S WSR400 S NOTE Part Numbers WSR320 S and WSR400 S are for residential use only HOLE MOUNT Step 1 Remove Mounting Plate A from Power Unit B Depress Tab Mounting Plate A Step 2 Insert Hole Mount C into Mounting Plate A and into Desk di Sopen Plate A Use bushing only in holes that are larger than 2 1 4 57mm Maximum hole size is 3 76mm Step 3 Secure to Desk Tighten Screws ES Legrand Wiremold electrical systems conform to and should be properly grounded in compliance with requirements of the current National Electrical Code or codes administered by local authorities All electrical products may present a possible shock or fire hazard if improperly installed or used Legrand Wiremold electrical products may bear the mark as UL Listed and or Classified and should be installed in conformance with current local and or the National Electrical Code WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious injury SAVE THESE INSTRUCTIONS 1 Grounded electrical products must be plugged into an outlet that is properly installed and grounded in accordance with all codes and ordinances Never remove
3. the grounding prong or modify the plug in any way Do not use any adapter plugs Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded Do not expose this product to rain wet or damp conditions Water entering this product will increase the risk of electric shock Do not abuse the power cord Keep the power cord away from heat oil sharp edges or moving parts If power cord becomes damaged replace the product This product must be properly installed before connecting to the power supply Do not use this product in combination with an extension cord Step 4 Feed Power Cord through Hole Mount and hook front slots A of Power Unit to Mount Clips B Step 5 Attach Power Unit to Mount Snap together two Tabs EDGE MOUNT Step 1 Remove Mounting Plate A from Power Unit B Mounting Plate A Step 2 Remove Hole Mount C NOTE This part is not needed CE for edge mounting Ay Hole Mount C Step 4 Attach Edge Mount to Desk Snap together two tabs Ll legrand Wiremold Copyright 2010 Legrand Wiremold All Rights Reserved Wiremold U S and International 60 Woodlawn Street West Hartford CT 06110 1 800 621 0049 e FAX 860 232 2062 Outside U S 860 233 6251 Canada 570 Applewood Crescent Vaughan Ontario L4K 4B4 1 800 723 5175 FAX 905
Download Pdf Manuals
Related Search