Foster 7105 142
Contents
1. 4 Set the time after which the alarm should sound by touching the or symbols 5 Touch the OK symbol You will hear a dou ble beep and see the symbol Q and the selected alarm time on the screen 1345 14 15 a 200 3 45 6 After the set time an alarm will sound and the symbols and will start blinking 7 Touch symbol to stop the alarm If you want to change the selected cooking time follow the instructions above again Stand by mode 1 Touch the symbol O which will stay lit up in red Touching the and symbols you will see the 5 clock settings on the screen cooking time end time alarm setting the clock and stand by mode FA 0 00 gt 14 15 0 00 14 15 Bx 2 When you have chosen setting RS touch the OK symbol 3 The screen will then display the two options for this setting screen off and screen on xR O 4 Touch the symbols and to select the preferred option Touch the OK symbol 5 You will hear a double beep confirming the selected option Selecting oven cooking settings Turn the oven on by touching the ON OFF symbol Touch symbol which will be lit up on the control panel The symbol x will change to red Touching the and symbols you can select one of the following cooking settings See the section Oven cooking settings E Ss W CO VE E 4 00 lh Touch the OK symbol You will hear a double beep confirming the selected settin2. clock and stand by mode a 0 00 gt 14 15 0 00 14 15 2 When you have chosen the cooking time setting I l touch the OK symbol 3 You will see the symbol I and the indi cation 0 00 on the screen 4 Touch the or symbols to programme the cooking time 5 Touch the OK symbol You will hear a dou ble beep and see the symbol I and the selected cooking time 200 A916 6 After the programmed cooking time the oven will switch itself off an alarm will sound briefly and the symbols and I will start blinking 7 To stop the alarm or the blinking touch symbol The oven will then show the current time and the ON OFF symbol will be lit up in white The oven is now off If you want to change the selected cooking time follow the instructions above again Programming the Cooking Stop Time 1 Touch the symbol which will stay lit up in red Touching the and symbols you will see the 5 clock settings on the screen cooking time end time alarm setting the clock and stand by mode F 0 00 gt 14 15 0 00 14 15 2 Touching the and symbols select the End Cooking Time setting gt l and then touch the OK symbol 3 You will see the symbol gt and the current time on the screen gt 14 15 4 Touch the or symbols to programme the end of cooking time 5 Touch the OK symbol You will hear a dou ble beep and see the symbol I and the sele
3. can be used with any size joints of meat Grill Toasting and browning This setting allows the surface to be cooked without affecting the inside of the food Suitable for flat pieces such as steaks ribs fish and toasts YY MaxiGrill For toasting larger surfaces than possible with the Grill setting in addition to greater toasting power for faster food browning c YYY Grill MaxiGrill with Fan For even roasting and simultaneous surface browning Ideal for mixed grills Perfect for bulky pieces such as poultry and game The meat should be placed on the oven grid with the tray below to collect meat juices Caution The door must be closed during use with Grill MaxiGrill or Grill MaxiGrill with Fan 58 A Conventional with Fan Suitable for roasts and cakes The fan spreads the heat evenly throughout the inside of the oven to reduce cooking time and temperature Turbo The fan spreads the heat coming from an element located at the back of the oven As a result of the evenly distributed temperature food can be cooked on two levels at the same time Turbo bottom heat Ideal for baking pizzas pies and fruit tarts or sponges O Slow cooker Designed to cook casseroles stews etc in the traditional way and for all recipes specifying long cooking times and low heat For the best results we recommend using covered casserole pans with lids first making sure they can be used in the oven O De
4. current time and the ON OFF symbol lit up in white The oven is now off e The roast is cooked to your taste and ready to serve If you want to change the selected cooking time follow the instructions above again Other oven settings Child Safety Setting This setting locks the oven preventing small children from playing with it To activate e First turn on the oven touching the ON OFF symbol if it is off e Next touch the and OK symbols at the same time e You will hear a long beep and see symbol O on the screen The oven is now locked If the glass fronted panel is touched at any time the symbol O will be displayed indicating the oven is locked To cancel the setting simply repeat the same instructions Oven Light The inside light will go on e When the oven door is open If the door is not closed after a certain time the light will turn off to reduce power consumption e When any cooking setting is selected The light will turn off after a certain time If you want to turn the light on during cooking touch the OK symbol If you keep your finger on this sensor for a few seconds the light will stay on throughout cooking To turn the light off touch the symbol OK again Handle for extracting shelves The handle for extracting shelves is used when you need to slide the shelf out and check what s cooking See drawings To take the shelf out of the oven use oven gloves Short hoo
5. the oven will automatically cook it for you If you do not select any setting or recipe the oven will turn itself off again showing the current time and the ON OFF symbol in white 59 ENGLISH Electronic Clock Settings Cooking Time This setting allows you to programme cooking time length after which the oven will turn off automatically Cooking Stop Time This setting allows you to programme the time for cooking to stop after which the oven will turn off automatically Cooking Time and Cooking Stop Time This setting allows both cooking time length and the stop time to be programmed The oven switches on automatically at the set time and operates for the cooking time it has been programmed for It switches itself off automatically at the entered stop time Timer Alarm An audible signal is produced at the programmed time even if the oven is not being used Stand by mode This mode permits you to choose between having the display screen on showing the time or off stand by with nothing displayed When the screen is off touching any part of the glassed front will bring up the clock again and the On Off symbol will light up When the oven is turned off the display screen will gradually turn itself off Programming Cooking Time 1 60 Touch the symbol O which will stay lit up in red Touching the and symbols you will see the 5 clock settings on the screen cooking time end time alarm setting the
6. worry about anything else as the oven will cook it for you with perfect results Possible recipes are shown below TEMPERA WEIGHT SYMBOL RECIPES PRE HEATING TURE DURATION RANGE DISHES Chicken According According 0 5 10 Kg Chicken duck poultry to weight to weight turkey etc i i Chick i Chicken legs nccording according 0 5 2 Kg icken to weight to weight or duck legs Q 7 Roast beef Veal According Raro 0 5 6Kg minced meat to weight to weight stuffed roast According According 0 5 10 K i i o to weight to weight amp Pork sucking pig Beef lamb According According 0 5 5Kg Beef lamb veal to weight to weight joints According According Beef or pork Chops 0 5 4K E P to weight to weight 8 chops aa Fish According According 0 5 5 Kg Fish to weight to weight Sponge or fruit 140 170 C 70 mi Cakes cakes alin cheesecake OO Fruit tart 150 180 C Fruit filling co BOO Fruit tart 150 180 C Fruit filling and shortcrust Cupcakes 150 180 C Cupcakes White bread 160 190 C Accordingto weight 0 5 2 Kg Rye bread YES 160 190 C According to weight 1 4 Kg Wholemeal bread 120 160 C According to weight 1 3 Kg Gratins of Gratins 160 190 C vegetables pasta potatoes Thick base pizza 66 190 250 C Selection of recipes e Turn the oven on by touching the ON OFF symbol e Touch the symbol amp which will stay lit up
7. Guida rapida di utilizzo Gu a R pida de Uso Guia R pido de Utiliza o Quick Start Guide Mode d emploi rapide FL F60 MTL Foster 5 FL F60 MTL Front control pane Oven Seal Double folding grill elements Handle for extracting shelves Grid shelf Telescoping guide rails Cake shelf Deep shelf Door switch Hinge Triple glazed door Air cooling outlet Cabinet Mounting Grill Screen Smoke Outlet Back Wall Panel Side lights Fan Full size interior glass Control Panel a et 4H oO B200 14 20 e AEE Em 1 On off switch for oven 6 Selecting temperature with the meat probe 2 Quick access to cooking settings 7 Access to cooking setting menu 3 Access to electronic timer settings 8 Access to recipe menu 4 Information screen 9 Selection of cooking temperature 5 Access to menu navigation or checking 10 Selection of food weight settings 57 ENGLISH Oven cooking settings With the cooking settings described below you will have several options for oven cooking You can use the table of cooking times provided with this manual for optimum results Conventional This setting is for use when baking cakes where the heat should be even to give a spongy texture Top heat For when you need to heat food gently Plate warming Bottom heat Heat only comes from beneath Suitable for warming plates or letting dough rise Grill and Lower Element Ideal for roasts This setting
8. Ham hock 80 85 C Loin of pork 65 70 C Roast ham 80 85 C Chicken 75 80 C Turkey 80 85 C Programming times when cooking with the meat probe When cooking with the meat probe you will only be able to set the start of cooking time alarm clock time and stand by mode You will not be able to set the cooking time as this is determined by when the preset temperature inside the meat is measured by the probe For this setting after turning on the meat probe e Touch the symbol O which will stay lit up in red Touching the and symbols you will see the 5 clock settings on the screen start time alarm setting the clock and stand by mode 1015 0 00 10 15 i 70 e When you have chosen the start time set ting F gt touch the OK symbol e You will see the symbol F gt and the current time on the screen gt 10 15 e Touch the or symbols to programme the start of cooking time e Touch the OK symbol You will hear a double beep and see the symbol gt and the selected start time The oven will stay off 170 gt 12 30 A 35 P 12 30 e At the set time the oven will turn on and cook the food e When the internal temperature of the roast reaches the temperature you have selected the oven will turn off an alarm signal will sound for a few seconds and the symbol A will blink e Touch symbol A to stop the alarm The oven will display the
9. cted end time 200 916 6 After the programmed time the oven will switch itself off an alarm will sound briefly and the symbols and 5 will start blinking 7 To stop the alarm or the blinking touch symbol OD The oven will then show the cur rent time and the ON OFF symbol will be lit up in white The oven is now off If you want to change the selected cooking time follow the instructions above again Programming Cooking Time and Cooking Stop Time 1 Touch the symbol which will stay lit up in red Touching the and symbols you will see the 5 clock settings on the screen cooking time end time alarm setting the clock and stand by mode F 0 00 gt 14 15 0 00 14 15 amp When you have chosen the cooking time setting I gt I touch the OK symbol You will see the symbol Il and the indi cation 0 00 on the screen Touch the or symbols to programme the cooking time Touch the OK symbol You will hear a dou ble beep On the screen the symbol II and the selected cooking time will be dis played Touch the symbol Touching the and symbols you will see the 5 timer settings on the screen cooking time end time alarm setting the clock and stand by mode b gt 0 00 gt 14 15 0 00 14 15 Touching the and symbols select the End Cooking Time setting gt l and then touch the OK symbol You will see the symbol gt and the curren
10. d the ON OFF symbol in white 63 ENGLISH Quick access to cooking settings When you turn the oven on touching the ON OFF symbol it immediately offers you the possibility of quick access to the following cooking settings which will be lit up in white ss Oo fh e Touch the symbol for the cooking setting you want e You will hear a double beep confirming the selected setting The oven will begin cook ing and in most cases you will see the fol lowing information on the screen 170 14 15 If you want to change the cooking setting or set temperature or use the electronic timer settings follow the instructions shown above in the section Selecting oven cooking settings Setting is a recipe If you want to change it please consult the next section During cooking the symbol O will blink indicating that the oven is transmitting heat to the food IMPORTANT After the thermostat is turned off the first time you will hear a sound indicating the selected temperature has been reached To turn the oven off you only need to touch the ON OFF symbol The screen will display the clock and the ON OFF symbol in white Recommendations for Defrosting Food The defrost setting works by means of a 2 level system of hot air HI is for meats in general and LO is for fish cakes pastries and bread 1 When you select the setting Ee follow the instructions in Selecting oven cooking settings the sc
11. frosting See the section Defrosting Food Recommendations for quo Keeping warm This setting provides the right level of heat for keeping prepared food warm in the oven until you are ready to serve them Using this setting the oven temperature range is limited to 50 90 C This setting can keep meat warm at 60 C in the oven Large cuts of meat can be warmed for 1 to 2 hours and smaller cuts for 30 40 minutes Oven Use Caution The electronic clock features Touch Control technology To operate simply touch the glass control symbols with your fingertip The touch control sensitivity continuously adapts to changing conditions Ensure that the glass fronted control surface is clean and free of any obstacles when turning on the oven If the clock does not respond correctly when you touch the glass you will need to turn off the oven for a few seconds and then turn it back on By doing this the sensors adjust automatically and will react once more to fingertip control Very important In the event of power failure your electronic clock timer settings will be erased and 12 00 will flash on the clock display Reset the clock and programme again Setting the Electronic Clock e When you connect the oven you will notice that 12 00 will flash and the symbols and light up e Touch the and symbols on the glass to set the hour Then touch the OK symbol e Touch the and symbols to set the minutes Then
12. g The oven will begin cooking and in most cases you will see the following information on the screen 170 14 15 The selected setting the preset cooking temperature for that setting and the clock or timer setting if any has been programmed a If you want to change the cooking setting e Touch symbol E e follow the instructions above b If you want to change the cooking tempera ture e Touch the symbol amp which will stay lit up in red e You will see symbol amp and the selected temperature for the cooking job on the screen 8 170 Touch the and symbols to set the new cooking temperature Touch the OK symbol The two beeps you hear after that will confirm the new time has been set c If you want to use the electronic timer for cooking e Touch the symbol which will stay lit up in red e Touching the and symbols you will see the 5 clock settings on the screen cooking time end time alarm setting the clock and stand by mode e Follow the instructions in the section Electronic Clock Settings to programme the settings you want During cooking the symbol will blink indicating that the oven is transmitting heat to the food IMPORTANT After the thermostat is turned off the first time you will hear a sound indicating the selected temperature has been reached To turn the oven off you only need to touch the ON OFF symbol The screen will display the clock an
13. ically indicated For this reason it is very important to select the correct food weight so the recipe can be properly cooked When cooking with a meat probe the oven will determine the cooking temperature only The cooking time will depend on the temperature selected for the probe With roasting programmes after a certain time has passed the oven will suggest you turn the roast over When it is time to do this the oven will emit a brief signal You will also see symbol on the screen until 158 HA 1 26 you have turned the roast over If you do not turn it over the oven will continue cooking according to the programmed recipe When cooking roast recipes remember that meat with a thick outer layer of fat will need increased cooking time Cooking time should also be increased when cooking sev eral pieces of meat at the same time 68 For baking or gratins remember that recipes are calculated for a weight of 500g of flour or 1 kg of raw potatoes or vegeta bles If you want to cook larger amounts you will need to reduce the temperature slightly and increase cooking time by about 10 minutes per extra kg If you want to cook smaller amounts this should be done with a shorter time and higher temperature ATTENTION For recipes for white bread rye bread fine base pizza and thick base pizza the oven should be pre heated while empty before putting the food in In this way the oven will be the right tempera
14. ill confirm the new time has been set c If you want to change the weight of the food to be cooked only possible in the first 10 minutes of cooking e Touch the symbol kg which will stay lit up in red e The screen will display the symbol EJ and the weight of the food to be coked according to the selected recipe Touch the and symbols to change the weight Finally touch the OK symbol e The two beeps you hear after that will confirm the new weight has been set Remember that when the weight is changed the cooking time or temperature may change automatically according to the parameters of the selected recipe 67 ENGLISH d If you want to use the electronic timer for cooking e Touch the symbol which will stay lit up in red The settings of the electronic timer will be shown on the screen e Follow the instructions in the section Electronic Clock Settings to programme the settings you want During cooking the symbol will blink indicating that the oven is transmitting heat to the food IMPORTANT After the thermostat is turned off the first time you will hear a sound indicating that pre heating has finished Important information about cooking with recipes When you select a recipe and indicate a weight the oven automatically calculates the temperature and cooking time needed but these values can be changed Cooking time starts from a cold oven unless pre heating has been specif
15. in red e The screen will display the different recipes proposed by the oven GADO TU A OW st S MD dh v amp amp e Touch the and symbols to select the desired recipe Touch the OK symbol e You will hear a double beep confirming your selection and the screen will display the fol lowing information 158 1 0 s Where the symbol of the chosen recipe and the cooking temperature for that recipe are shown and the preset weight for the recipe is blinking Touch the and symbols to change the weight of the food Finally touch OK to accept the selection If you do not touch the OK symbol the screen will be cancelled and the recipe information will be shown You will hear a double beep confirming the selected recipe The oven will begin cooking and you will see the following information on the screen 158 A 1 26 The symbol of the chosen recipe the cooking temperature and the calculated cooking time for the recipe At the start or during cooking a If you want to change the cooking setting e Touch symbol E4 e follow the instructions above b If you want to change the cooking tempera ture e Touch the symbol which will stay lit up in red You will see symbol 8 and the selected temperature for the cooking job on the screen 8 170 Touch the and symbols to set the new cooking temperature Touch the OK symbol e The two beeps you hear after that w
16. k 2 Position for cake shelf The short hook over the shelf Long hook Position for deep shelf The long hook over the shelf 71 ENGLISH Changing the oven light bulb ATTENTION Make sure the oven is unplugged before changing the bulb e Detach the chrome supports by loosening the screw A e Release the bulb holder glass cover with a tool 72 e Change the bulb e Reassemble the glass cover and ensure that everything fits in the correct position The replacement bulb must be resistant to temperatures up to 300 C You can order one from Technical Service
17. reen will display HI LO 2 Touch the and symbols to select the HI or LO defrosting levels Then touch the OK symbol 3 The two beeps you hear after that will con firm the selection 64 When defrosting remember Unpackaged food should be placed on the oven tray or on a dish Defrost large pieces of meat or fish by pla cing them over the grid with a tray underne ath to collect any liquid Meat and fish do not need to be completely thawed before cooking Condiments can be added once the surface is soft Food should always be cooked after defros ting Do not freeze food that has been defrosted See the following chart for defrosting times and temperature levels LO LEVEL HI LEVEL FOOD Weight Time Weight Time Bread Yo Kg 35 min Cake Yo Kg 25 min Fish Yo Kg 30 min Fish 1 Kg 40 min Chicken 1 Kg 75 min Chicken 1 5 Kg 90 min Rib steak Yo Kg 40 min Minced meat Y Kg 60 min Minced meat 1 Kg 120 min The times shown in the chart are a guide The time needed for defrosting will depend on the temperature of the room weight of the food and how deeply frozen it is 65 ENGLISH Oven cooking settings Your oven offers the possibility of cooking according to the following recipes To do this just choose the appropriate recipe please see the section Selecting recipes enter the weight of the food to be coked and put it in the oven There is no need to
18. st with the probe already in it into the oven e Plug the probe into the socket in the upper left side of the oven When you turn the probe on the screen will display the symbol and the recom mended temperature will flash If you want to change the recommended temperature touch the and symbols Then touch the OK symbol Finally select a cooking setting or recipe During cooking the screen will display the symbol A and the temperature currently measured by the meat probe alternating with the selected temperature 170 14 15 A 35 14 15 When the internal temperature of the roast reaches the temperature you have selected the oven will turn off an alarm signal will sound for a few seconds and the symbol A will blink Touch symbol to stop the alarm The oven will display the current time and the ON OFF symbol lit up in white The oven is now off The roast is cooked to your taste and ready to serve 69 ENGLISH If you want to change the meat probe temperature during cooking touch the symbol N You can then change the temperature by touching the and symbols Finally touch the OK symbol You will hear a double beep confirming the change Cooking chart suggested temperatures for cooking with the meat probe CUT Probe Temperature Notes Roast Beef 35 40 C RARE Roast Beef 45 50 C MEDIUM Roast Beef 55 60 C WELL DONE Leg of lamb 65 70 C
19. t time on the screen gt 14 15 Touch the or symbols to programme the end of cooking time 10 Touch the OK symbol You will hear a dou ble beep 11 The oven will stay off The screen will dis play the symbol and the cooking time alternating with the symbol gt I and the end time indicating that the oven is pro grammed 61 ENGLISH 200 9 00 200 gt 114 50 12 When it is time to start cooking the oven will turn on and will operate for the pro grammed cooking time The symbol I gt I and the remaining cooking time will be dis played on the screen 200 HA 8_55 13 After the programmed cooking time the oven will switch itself off an alarm will sound briefly and the symbols O and gt I will start blinking 14 To stop the alarm or the blinking touch symbol The oven will then show the current time and the ON OFF symbol will be lit up in white The oven is now off If you want to change the selected cooking time follow the instructions above again Programming the Timer Alarm 1 Touch the symbol which will stay lit up in red Touching the and symbols you will see the 5 clock settings on the screen cooking time end time alarm setting the clock and stand by mode H 0 00 gt 14 15 Q 0 00 O 14 15 2 When you have chosen the alarm setting touch the OK symbol 62 3 You will see the symbol and the indi cation 0 00 on the screen 0 00
20. touch the OK symbol e You will then hear a double beep confirming the time set e The oven will display the time set and the ON OFF symbol lit up in white If you want to change the time e If the oven is off turn it on by touching the ON OFF symbol e Touch the symbol which will stay lit up in red Touching the and symbols you will see the 5 clock settings on the screen cooking time end time alarm setting the clock and stand by mode H 0 00 gt 14 15 0 00 14 15 Hi e When you have chosen the clock setting function touch the OK symbol e You will then see the current time set on the screen 14 15 e Touch the and symbols on the glass to set the hour Then touch the OK symbol e Touch the and symbols to set the minutes Then touch the OK symbol e You will then hear a double beep confirming the time set Oven Settings To cook with your oven touch the ON OFF symbol You will then see the different possibilities for using your oven lit up in white e Cooking setting symbols Quick access to the most used cooking settings A OH HM e Symbol Electronic Clock Settings For programming your oven with timer settings e Symbols and OK e Symbol Selecting oven cooking settings Enables you to select the cooking setting by combining different heat sources e Symbol 2 Selection of recipes Simply put the food in and indicate its weight on the screen
21. ture for the best results For other recipes pre heating is not needed When cooking with these recipes you should First select the recipe and the oven will begin pre heating IMPORTANT Do not put the food into the oven until the signal During pre heating the symbol of the select ed recipe and the symbol amp will blink on the screen When the temperature set for the recipe is reached the oven will emit a signal You can now put the food into the oven The signal will continue to sound until you put the food in Finally it will cook the food automatically according to the recipe Cooking with the meat probe The meat probe measures the temperature inside a roast When this temperature reaches a previously set level the oven will turn off automatically Cooking with the meat probe ensures optimum results for any type of meat or size of roast Placing the meat probe e Use only the original meat probe e Place the probe before roasting begins e Insert the probe into the side of the roast so that the point reaches its centre Insert the entire probe up to the handle e It is recommended to turn the roast over half way through cooking Bear this in mind when placing the probe to avoid problems with it later The point of the probe must not be touching the bone or fatty areas Also it should not be in a hollow area which could happen with poultry Using the meat probe e Put the roa
Download Pdf Manuals
Related Search