Swan SI9021BMN steam ironing station
Contents
1. Swan designed for life Steam Generator Model SIS0271N Helpline 0871 200 0003 v2 0 S19021N_IM indd 1 28 10 2014 10 45 i i i S IMPORTANT INFORMATION RETAIN FOR FUTURE USE When using any electrical appliance basic safety precautions should always be followed including the following e Always ensure that the voltage on the rating label corresponds to the mains voltage in your home e Incorrect operation and improper use can damage the appliance and cause injury to the user e This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised Keep the appliance and its cord out of reach of children aged less than 8 years Check the power cord and plug regularly for any damage If the cord or the plug is damaged it must be replaced by the manufacturer or qualified person in order to avoid an electrical hazard e Do not use the appliance if it has been dropped or damaged in any way In case of damage take the unit in for examination and or repair by an authorised service agent e Never immerse the unit in water or any other liquid for cleaning purposes e Remove the plug from the socket by gripping the plug Do not pull on the cord to disconnect the appliance f2. Electromagnetic Compatibility Directive 2006 95 EC The LVD Directive Low Voltage Directive 201 1 65 EU The RoHS directive Restriction of Hazardous Substances Directive S WARRANTY This product is guaranteed for 2 years from the date of original purchase If any defect arises due to faulty materials of workmanship the faulty products must be returned to the place of purchase Refunds or replacement is at the discretion of the store The following conditions apply The product must be returned to the retailer with proof of purchase The product must be installed and used in accordance with the instructions contained in this instruction guide lt must be used only for domestic purposes lt does not cover wear and tear damage misuse or consumable parts swan Products Ltd has limited liability for incidental or consequential loss or damage This guarantee is valid in the UK and Eire Only S BS PLUG The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE GREEN YELLOW EARTH As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red T
3. back into the iron base fig 2 6 2 With the tank empty press down the steam surge button button a couple of times to remove any remaining water in the interconnecting cord then place the iron back on the base Warning the soleplate is still hot be careful 3 Turn the temperature dial back to O position and unplug from the mains socket Allow the iron to completely cool before cleaning Note you can wipe the surface of unit clean with a soft cloth Try not to dislodge the silicone cushion out of it s mountings because it is difficult to fit back Warning do not immerse the steam iron or stand in water or other liquids AUTO DESCALING FEATURE There is a limescale filter inside the tank The filter can absorb insoluble calcium ions and convert them to soluble natrium ions which makes the water softer This greatly reduces the build up of limescale However if you do live in a hard water area the life of your iron will increase significantly if you use bottled water Note to keep the soleplate smooth never let any metal materials rub against it REPLACE THE LIMESCALE FILTER EVERY 3 MONTHS OR MORE REGULARLY IF YOU LIVE IN A HARD WATER AREA VISIT WWW SWAN BRAND CO UK FOR SPARE FILTERS Swan S19021N_IM indd 6 28 10 2014 10 45 S DOCUMENTATION We Swan Products Ltd declare that this product conforms to the following product legislation in accordance with the following directive s 2004 108 EC The EMC Directive the
4. he wire which is coloured GREEN YELLOW must be connected to the terminal which is marked with the letter E or earth symbol and is coloured GREEN or GREEN YELLOW WARNING THIS APPLIANCE MUST BE EARTHED S DISPOSAL OF UNIT are required to dispose of old electrical and electronic appliances like this separately Please visit www recycle more co uk or www recyclenow co uk for access to information EE about the recycling of electrical items Please visit www weeeireland ie for access to information about the recycling of electrical items purchased in Ireland The WEEE directive introduced in August 2006 states that all electrical items must be recycled rather than taken to landfill Please arrange to take this appliance to your local Civic Amenity site for recycling once it has reached the end of its life Swan a Appliances bearing the symbol shown here may not be disposed of in domestic rubbish You S19021N_IM indd 7 28 10 2014 10 45 DERRER ee www swan brand co uk Scan this QR code We love we re proud Find us on Facebook to hear about what we do of our quality our story on selected products Copyright Swan Products Ltd PO Box 3117 Stoke on Trent ST4 96D SI9021N_lM indd 8 28 10 2014 10 45
5. ients in hotels motels and other residental type environments bed and breakfast type environments S TECHNICAL DATA Description Steam Generator C 4 X Model SI902 1N Input Voltage 220 240V Frequency 50Hz Power consumption 2000 2400 Watts AN CAUTION SURFACES BECOME HOT DURING USE Swan S19021N_IM indd 3 28 10 2014 10 45 1 Water tank 2 Handle 3 Soleplate 4 Cover 5 Lens 6 Steam release button 7 Power cord supply hose 8 Power cord 9 Handle release button 10 Filter 11 Water tank lock 12 Temperature control dial Temperature Setting Fabric Synthetics Silk Nylon Steam iron on the wrong side of the lroning Instruction Dry Ironing Steam Selection Swan S19021N_IM indd 4 eee COTTON Cotton Wool Steam Ironing a 28 10 2014 10 45 S HOW TO USE Before first use Remove any stickers protective foil or storage cover from the soleplate Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes for the purpose of removing any residue on the soleplate Note It is normal for a slight odour to come from the unit during the first use This is due to light oils used to preserve components during manufacture The odour will disappear after first use Operation 1 Press both Handle Release Buttons at the same time and put the handle down fig 1 Connect the power cord to outlet the p
6. n a hot surface Ensure that the unit is switched off after use The manufacturer does not accept responsibility for any damage or injury caused by improper or incorrect use or for repairs carried out by unauthorised personnel In case of technical problems switch off the product and do not attempt to repair it yourself Return the appliance to an authorised service facility for examination adjustment or repair Always insist on the use of original spare parts Failure to comply with the above mentions precautions and instructions could affect the safe operation of this product Your appliance must never be switched on through an external timer or any kind of separate remote control system The water inlet must be closed during use Do not open the safety valve while using the appliance or before the water is completely used up when the iron stops producing steam indicates that the tank is empty To add water unplug and wait 15 minutes to avoid sudden temperature changes Place a cloth over the safety valve and unscrew slowly to allow any remaining steam pressure to escape slowly Only place the unit complete with base on a stand that is designed to withstand the weight Some lightweight ironing boards may be unsuitable In this case place on separate counter top This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops offices and other working environments farm houses by cl
7. ower light illuminates NOTE The iron might not operate unless handle is in DOWN position 2 Press the tank lock button then take out water tank from stand Remove the limescale filter Fill the tank but do not exceed the MAX level indication on the side fig 2 6 3 Replace the limescale filter and slide the tank back into the iron base making sure it clicks into place Check the garment label for the required ironing temperature Then turn the temperature dial to your desired setting And the heating light will be illuminated Tips to prevent shiny spots iron the reverse side of the fabric for silk wool and synthetic materials and to prevent stains avoid using the steam functions put Steam ON OFF switch in OFF position Once the soleplate temperature has reached the preset temperature the heating light will go out press down Steam Button The pump will start and after a few seconds the steam will come through Please note when pressing the steam button for the first time at the start of the new ironing session direct the iron away from garments to allow any small amounts of water from previous ironing sessions to be ejected NOTE THE PUMP MAY MAKE A NOISE FOR A FEW SECONDS UNTIL IT IS PROPERLY PRIMED YOU CAN PRIME THE PUMP A LITTLE Fig 6 QUICKER IF YOU HOLD THE HAND UNIT BELOW THE HEIGHT OF THE BASE GRAVITY WILL GET THE STEAM THROUGH QUICKER Tip the interconnection cord can become quite hot after extended u
8. rom the mains Always unplug the unit when not in use before cleaning or when adding or removing parts e The use of accessory attachments that are not recommended or supplied by the manufacturer may result in injuries fire or electric shock e Do not let the cord hang over the edge of a table or counter Ensure that the cord is not in a position where it can be pulled on inadvertently e Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric burner or in a heated oven e Do not use the appliance on a gas or electric cooking top or over or near an open flame e Use of an extension cord with this appliance is not recommended However if it is necessary to use an extension lead ensure that the lead is suited to the power consumption of the appliance to avoid overheating of extension cord appliance or plug point Do not place the extension cord in a position where it can be pulled on by children or animals or tripped over e This appliance is not suitable for outdoor use Do not use the appliance for anything other than Its intended use Swan S19021N_IM indd 2 28 10 2014 10 45 WwW EW lt S IMPORTANT INFORMATION RETAIN FOR FUTURE USE Do not carry the appliance by the power cord Do not leave the appliance unattended during use Always unplug the unit when not in use or before cleaning Always operate the appliance on a smooth even stable surface Do not place the unit o
9. se do not touch At any time during the ironing session you can place the iron on the silicone cushion or on the heel rest and have a nice cup of tea Note the steam output is 60 90g min Fia 8 ig use vertical steam for garments Swan S19021N_IM indd 5 28 10 2014 10 45 mail lt Ww S IRONING TIPS Always check first whether a label with ironing instructions is attached to the article The iron heats up quicker than it cools down therefore you should start ironing the articles requiring the lowest temperature such as those made of synthetic fibres If the fabric consists of various kinds of fibres you must always select the lowest ironing temperature to iron the composition of those fibres Silk and other fabrics that are likely to become shiny should be ironed on the inner side Velvet and other textures that rapidly become shiny should be ironed in one direction with light pressure applied Always keep the iron moving at any given moment Pure woollen fabrics 100 wool may be ironed with the iron set a steam position Preferably set steam button to the maximum position and use a dry cloth as a mat Note when ironing woolen fabrics shining of the fabric may occur So it is suggested that you should turn the article inside out and iron the reverse side AFTER IRONING 1 Take out the water tank remove the limescale filter and empty all the water out replace the filter then place tank
Download Pdf Manuals
Related Search