Swan SI4030GRN steam ironing station
Contents
1. 3 MONTHS OR MORE REGULARLY IF YOU LIVE INA HARD WATER AREA VISIT WWW SWAN BRAND CO UK FOR SPARE FILTERS Helpline Number 0121 327 6889 WWW SWAN BRAND CO UK Swan 25 05 2012 10 17 BS Plug Wiring The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE GREEN YELLOW EARTH As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red The wire which is coloured GREEN YELLOW must be connected to the terminal which is marked with the letter E or earth symbol and is coloured GREEN or GREEN YELLOW WARNING THIS APPLIANCE MUST BE EARTHED WEEE Directive Disposal of Unit Disposal instructions for Swan items in accordance with the WEEE directive Appliances bearing the symbol shown here may not be disposed of in domestic rubbish You are required to dispose of old electrical and electronic appliances like this separately Please visit www recyclemore co uk or www recylcenow co uk for access to information about the recycling of electrical items The WEEE directive introduced in August 2006 states that all electrical items must be recycled rath2. SS designed for life www swan brand co uk Scan this QR code We love we re proud Find us on Facebook to hear about what we do of our quality our story Steam Generator Iron Copyright 2012 Swan Products Ltd PO Box 3117 Stoke on Trent ST4 96D Models SI4Q30N SI4030GRN SI4030N indd 2 3 25 05 2012 10 17 Important Safeguards When using any electrical appliance basic safety precautions should always be followed including the following 1P 2 3 10 11 12 13 14 16 17 18 19 Swan Always ensure that the voltage on the rating label corresponds to the mains voltage in your home Incorrect operation and improper use can damage the appliance and cause injury to the user This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Check the power cord and plug regularly for any damage If the cord or the plug is damaged it must be replaced by the manufacturer or qualified person in order to avoid an electrical hazard Do not use the appliance if it has been dropped or damaged in any way In case of damage take the unit in for examination and or repair by an authorised service agent Never i
3. U CAN PRIME THE PUMP A LITTLE QUICKER IF YOU HOLD THE HAND UNIT BELOW THE HEIGHT OF THE BASE GRAVITY WILL GET THE STEAM THROUGH QUICKER At the beginning of the ironing session you should iron the articles that require the lowest ironing temperature first such as those made of synthetic fibres Tip the interconnection cord can become quite hot after extended use do not touch At any time during the ironing session you can place the iron on the silicone cushion or on the heel rest and have a nice cup of tea Note the steam output is 40 70g min Helpline Number 0121 327 6889 Swan WWW SWAN BRAND CO UK S14030N indd 6 7 ee Ironing Tips Always check first whether a label with ironing instructions is attached to the article The iron heats up quicker than it cools down therefore you should start ironing the articles requiring the lowest temperature such as those made of synthetic fibres If the fabric consists of various kinds of fibres you must always select the lowest ironing temperature to iron the composition of those fibres Silk and other fabrics that are likely to become shiny should be ironed on the inner side Velvet and other textures that rapidly become shiny should be ironed in one direction with light pressure applied Always keep the iron moving at any given moment Pure woollen fabrics 100 wool may be ironed with the iron set a steam position Preferably set steam button to the maximum p
4. amage or injury caused by improper or incorrect use or for repairs carried out by unauthorised personnel In case of technical problems switch off the product and do not attempt to repair it yourself Return the appliance to an authorised service facility for examination adjustment or repair Always insist on the use of original spare parts Failure to comply with the above mentions precautions and instructions could affect the safe operation of this product Your appliance must never be switched on through an external timer or any kind of separate remote control system Specification Model No SI4030N SI4030GRN 230V 50Hz 2200W Helpline Number 0121 327 6889 WWW SWAN BRAND CO UK SI4030N indd 4 5 Limescale filter Tank release button Tank Temperature light When indicator light is illuminated it indicates that the iron is heating up it will go out when it has reached selected temperature The light cycles on and off during ironing as the iron maintains the selected temperature Steam Button When this button is pressed the pump will start and the steam will start to be pumped from base to iron through the interconnection cord Please note that small amounts of water left in the intercon nection cord from previous ironing sessions may be ejected from the sole plate when this button is pressed for the first time For this reason it is advisable to perform the first steam surge away from garments a 5 10 second surge shoul
5. d expel any water from previous ironing sessions The pump may make a noise for a few seconds until it is properly primed Temperature dial Turn the temperature dial clockwise to increase iron temperature and anti clockwise to reduce it Temperature guidelines for particular garment materials are shown on the dial Limescale Filter This is a removable filter that collects limescale and calcium deposits from the water Please call the help line to order limescale filters these are chargeable Tank Lock button The button locks the water tank in stand so that the tank can not slip out and be damaged Pump light This light illuminates when the Steam Button is pressed Power light When the light is on it indicates that the unit has been connected to power supply Steam ON OFF Switch In the OFF position the iron has no steam function which is ideal for dry ironing applications In the ON position all steam functions are available Helpline Number 0121 327 6889 WWW SWAN BRAND CO UK 25 05 2012 10 17 Swan Before first use Remove any stickers protective foil or storage cover from the soleplate Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes for the purpose of removing any residue on the soleplate Note It is normal for a slight odour to come from the unit during the first use This is due to light oils used to preserve components during manufacture The od
6. er than taken to landfill Please arrange to take this appliance to your local Civic Amenity site for recycling once it has reached the end of its life Declaration of EC Conformity 004 108 EEC The Electromagnetic Compatibility Directive 006 95EC The LVD directive Low Voltage Directive 002 95 EC The RoHS Directive Restriction of Hazardous substances Directive Kev Stewart Product Manager Swan Helpline Number 0121 327 6889 WWW SWAN BRAND CO UK S14030N indd 8 9 Two Year Warranty This product is guaranteed for 2 years from the date of original purchase If any defect arises due to faulty materials of workmanship the faulty products must be returned to the place of purchase Refunds or replacement is at the discretion of the store The following conditions apply The product must be returned to the retailer with proof of purchase The product must be installed and used in accordance with the instructions contained in this instruction guide It must be used only for domestic purposes It does not cover wear and tear damage misuse or consumable parts Swan Products Ltd has limited liability for incidental or consequential loss or damage This guarantee is valid in the UK and Eire Only Swan Brand Heritage Did you know In 1934 most homes were heating their irons over the gas ring or still putting hot coal in them This Swan iron was basically a n element w ith a handle which plugged straight into a lig
7. ht bulb socket Andat a mere 1 4 s hillings 7Op it meant many households could own a prestigious Swan Product 25 05 2012 10 17
8. mmerse the unit in water or any other liquid for cleaning purposes Remove the plug from the socket by gripping the plug Do not pull on the cord to discon nect the appliance from the mains Unplug the unit when not in use or before cleaning The use of accessory attachments that are not recommended or supplied by the manufac turer may result in injuries fire or electric shock Do not let the cord hang over the edge of a table or counter Ensure that the cord is not in a position where it can be pulled on inadvertently Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric burner or in a heated oven Do not use the appliance on a gas or electric cooking top or over or near an open flame Use of an extension cord with this appliance is not recommended However if it is necessary to use an extension lead ensure that the lead is suited to the power consumption of the ap pliance to avoid overheating of extension cord appliance or plug point Do not place the extension cord in a position where it can be pulled on by children or animals or tripped over This appliance is not suitable for outdoor use Do not use the appliance for anything other than its intended use Do not carry the appliance by the power cord Do not leave the appliance unattended during use Always operate the appliance on a smooth even stable surface Do not place the unit on a hot surface The manufacture does not accept responsibility for any d
9. osition and use a dry cloth as a mat Note when ironing woolen fabrics shining of the fabric may occur So it is suggested that you should turn the article inside out and iron the reverse side Cleaning and Maintainance AFTER IRONING 1 Take out the water tank remove the limescale filter and empty all the water out replace the filter then place tank back into the iron base 2 With the tank empty press down the steam surge button button a couple of times to remove any remaining water in the interconnecting cord then place the iron back on the base Warning the soleplate is still hot be careful 3 Turn the temperature dial back to 0 position and unplug from the mains socket Allow the iron to completely cool before cleaning Note you can wipe the surface of unit clean with a soft cloth Try not to dislodge the silicone cushion out of it s mountings because it is difficult to fit back Warning do not immerse the steam iron or stand in water or other liquids AUTO DESCALING FEATURE There is a limescale filter inside the tank The filter can absorb insoluble calcium ions and convert them to soluble natrium ions which makes the water softer This greatly reduces the build up of limescale However if you do live in a hard water area the life of your iron will increase significantly if you use bottled water Note to keep the soleplate smooth never let any metal materials rub against it REPLACE THE LIMESCALE FILTER EVERY
10. our will disappear after first use Operation 1 Connect the power cord to outlet the power light illuminates 2 Press down tank lock button then take out water tank from stand Turn the limescale filter clockwise then draw it out you may need to invert the tank to facilitate this Fill the tank but do not exceed the MAX level indication on the side 3 Replace the limescale filter and slide the tank back into the iron base making sure it clicks into place Check the garment label for the required ironing temperature Then turn the temperature dial to your desired setting And the heating light will be illuminated Temperature settings 1 one star 80 120C Synthetic fibres silk 2 two star 120 160C Wool 3 three star 160 200C Cotton linen Tips to prevent shiny spots iron the reverse side of the fabric for silk wool and synthetic materials and to prevent stains avoid using the steam functions put Steam ON OFF switch in OFF position Once the soleplate temperature has reached the preset temperature the heating light will go out press down Steam Button The pump will start and after a few seconds the steam will come through Please note when pressing the steam button for the first time at the start of the new ironing session direct the iron away from garments to allow any small amounts of water from previous ironing sessions to be ejected NOTE THE PUMP MAY MAKE A NOISE FOR A FEW SECONDS UNTIL IT IS PROPERLY PRIMED YO
Download Pdf Manuals
Related Search