Bosch WAW28560GB washing machine
Contents
1. 22 Placing laundry into the drum 22 Measure and add detergent and care products naaa aa 22 Change the programme default SettiNngS auaa 23 Select additional programme Se WINGS 26 eat mcr eee bor ewe ae we 24 Start the programme 0 24 Child lock 3 SEC 0008 24 Adding laundry 0000 24 Changing the programme 25 Cancel the programme 25 Programme end during rinse hold 25 Programme end aoaaa headed 25 Removing laundry switching off the appliance ouaaa 25 t Appliance settings 26 Activating the setting mode 26 Changing the signal volume 26 Selecting deselecting the appliance automatic switch off 26 Switching the drum care information signal on off Exiting setting mode 26 SENSO aah cscecnae canon ins 27 Automatic load sensing 21 Unbalanced load detection system 27 AQuaSensor 2 ce aa 27 en Intended use Cleaning and maintenance Machine housing control panel LOTT 5 do cic arse as ce ck sche ac od a a Descaling cee eee Detergent drawer and housing The drain pump is blocked emergency draining The drain hose at the siphon is DIOCKEG au su eaaa via ad tai Geen as oe Filter in the water supply blocked Faults and what to do about them Emergency release 50 Information on the display panel Faults and what to do about them2. Register your new Bosch now www bosch home com welcome Washing machine WAW32560GB WAW28560GB en Instruction Manual and Installation Instructions Your new washing machine You have chosen a Bosch washing machine Please take a few minutes to read and become familiar with the advantages of your washing machine To meet the high quality demands required by Bosch every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and Is in perfect condition For more information on our products accessories replacement parts and services see our website www bosch home com or contact our after sales service centres lf the operating and installation instructions describe different models any differences will be pointed out at the relevant points in the text an Read these operating and installation instructions before switching on the washing machine Display rules A Warning This combination of symbol and signal word indicates a possibly dangerous situation Not heeding the warning can Cause death or injuries Caution This signal word indicates a possibly dangerous situation Not heeding the caution can cause property and or environmental damage Note tip Information about the optimum use of the appliance any other useful information 1 2 3 a b The steps are represented by numbers or letters a Lists are represented
3. Outdoor Membrane coated weatherproof or outdoor clothing and water resistant fabrics Notes m Usespecial detergent suitable for machine washing add the correct dosage to compartment Il in accordance with the manufacturer s instructions m Laundry must not be treated with fabric softener Before washing clean the detergent drawer thoroughly all compartments to remove fabric softener residue Sportswear sportswear and leisurewear made from microfibre fabrics Notes m Laundry must not be treated with fabric softener m Before washing clean the detergent drawer thoroughly all compartments to remove fabric softener residue Reduced load for the SpeedPerfect setting Max spin speed depending on the model Programme depending on the model Add special detergent for outdoor clothing to compartment Il Add a waterproofing agent max 170 ml to compartment amp Max 1 kg 40 C w 0 800 rpm EcoPerfect SoeedPerfect Aqua Plus Max 2 kg 40 C w 0 800 rpm EcoPerfect SoeedPerfect Aqua Plus Max 2 kg 40 C w 0 800 rpm EcoPerfect SpeedPerfect Prewash Aqua Plus Reduced Ironing 17 en Programme type of laundry information Settings Overview of programmes Curtains 3 5 kg heavy curtains or 25 30 m lightweight drapes Notes m shorter rinse and final spin cycles m Use a detergent that is suitable for machine washing curtains he Prewash
4. O l After sales service 4 Consumption rates Energy and water consumption programme duration and residual moisture for the main washing programmes Efficiency test programmes for coton TADNICS 4 wesc Cea ea te eee oA Technical data Positioning and connecting Included with the appliance Safety instructions Installation surface 040 Installation on a base or a wooden OLOO eect ae ba wee ek oe ee Installation on a platform with drawer we Installing the appliance in a kitchenette Removing the transport locks Hose and cable lengths Water inlet 000 Water outlet 00 Levelling Electrical connection Before washing for the first time Transportation 0004 Intended use For private domestic use only Ihe washing machine is suitable for washing machine washable fabrics and hand washable wool in detergent solution m o be operated with cold mains water and standard detergents and care products which are suitable for use in washing machines m When measuring the amount of all detergents additives care products and cleaning agents always check the manufacturer s instructions he washing machine may be used by children over the age of 8 years old and by persons with reduced ohysical sensory or mental capacity or by persons with a lack of experience or knowledge if
5. Z Warning Risk of injury When you wash at high temperatures the glass in the a machine door gets ot Do not let children touch the hot washing machine door Environmental protection Packaging used appliance X Dispose of packaging in an environmentally responsible manner This appliance is labelled in accordance with European Directive 2012 19 EU concerning used electrical and electronic appliances waste electrical and electronic equipment WEEE The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU Tips on economical use m Always fill the appliance with the maximum amount of laundry for the relevant programme Overview of programmes Page 14 Wash normally soiled laundry without a prewash m Save energy and detergent when washing lightly and normally soiled laundry Page 13 m Ihe selectable temperatures apply to the care labels on the textiles The temperatures in the machine may deviate from this so that you get the optimum mix of energy saving and washing results Environmental protection en Information on energy and water consumption Page 11 The displays provide information about the relative level of energy and water consumption in the selected programmes The more indicator lights light up the higher the programme s consumption This enables you to compare the consumption lev
6. 15 minutes suitable for small 40 C items of lightly soiled laundry 0 1200 rom Dark Wash Max 3 5 kg Dark coloured cottons and dark coloured easy care fabrics 40 C turn items inside out before washing 0 1200 rpm EcoPerfect SpeedPerfect Prewash Aqua Plus Reduced Ironing Allergy Max 7 kg 5 kg Hard wearing fabrics made of cotton or linen 60 C Note Particularly suited to washing items that need to be y 0 1600 rom hygienically clean and especially kind to sensitive skin thanks to the longer wash cycle at a defined temperature higher water level and EcoPerfect SpeedPerfect longer spin cycle Prewash Aqua Plus Reduced Ironing Reduced load for the SpeedPerfect setting Max spin speed depending on the model Programme depending on the model 16 Overview of programmes en Programmer type of laundry information Settings Outdoor Impregnation Wash cycle followed by waterproofing of membrane coated weatherproof and outdoor clothing or water resistant fabrics select a programme eee tS ee Press the Dl button After treat the laundry in accordance with the manufacturer s instructions Notes m Use a special detergent suitable for machine washing and dose in accordance with the manufacturer s instructions m Laundry must not be treated with fabric softener Before washing clean the detergent drawer thoroughly all compartments to remove fabric softener residue
7. Press the button The appliance is switched on and the Cottons programme is shown at position 1 2 Press the Temperature button and at the same time turn the programme selector clockwise to position 2 Release the button The setting mode is activated and the oreset volume for the information signals appears in the display panel You can now change the settings 26 Changing the signal volume Use the Finished in or button to change the following settings at the corresponding programme selector positions m 2 The volume of the information signals and or m 3 The volume of the button signals 0 off 1 quiet 2 medium 3 loud 4 very loud nf a A 01234 Exit setting mode or Selecting deselecting the appliance automatic switch off With the programme selector in position 4 press the Finished in or button to turn the automatic switch off function on or off Exit setting mode or Switching the drum care information signal on off depending on the model With the programme selector in position 5 press the Finished in or button to switch the Drum Clean information signal on or off Exiting setting mode To exit and save the settings press the O button The appliance is switched off The selected settings will take effect the next time the washing machine is switched on Sensors Automatic load sensing Depending on the type of fabric and load the automatic
8. SCrews 43 Aqua Stop warranty Onl y for appliances with Aqua Stop In addition to warranty claims against the vendor based on the purchase agr the 1 2 3 eement and to our appliance warranty we will provide compensation under following conditions lf water damage is caused due to a fault in our Aqua Stop system we will compensate domestic customers for the damage caused The liability guarantee is valid for the service life of the appliance lt is a prerequisite of all warranty claims that the appliance with Aqua Stop must have been installed and connected correctly in accordance with our instructions this also includes a correctly fitted Aqua Stop extension genuine accessories Our warranty does not cover defective feed lines or fittings leading to the Aqua Stop connection at the tap Appliances with Aqua Stop do not need to be supervised during operation nor secured afterwards by turning off the tap The tap only needs to be turned off if you are away from home for a long period e g for several weeks holiday Advice and repair order in the event of faults 0844 892 8979 Calls from a BT landline will be charged at up to 3 pence per minute A call set up fee of up 6 pence may apply 01450 2655 0 03 per minute at peak Off peak 0 0088 per minute You can find the contact information for all countries in the attached after sales service directory Ro Ca bert Bosch Hausgerate GmbH rl
9. The connection point must be secured using a hose clamp with a diameter of 24 40 mm available from specialist dealers Positioning and connecting en Drainage into a plastic pipe with rubber bushing or into a drainage pit Levelling Align the appliance using a spirit level Incorrect alignment may result in loud noises vibrations and machine movement 1 Loosen the lock nuts using a WAF1 7 spanner by turning it in a clockwise direction 2 Check the alignment of the washing machine with a spirit level and adjust it if necessary Change the height by turning the appliance feet All four appliance feet must stand firmly on the ground 3 The lock nuts on all four appliance feet must be screwed tightly against the housing using a suitable WAF 17 spanner In doing so hold the foot tight and do not adjust its height 4 en Positioning and connecting Electrical connection Warning Danger of death There is a risk of electric shock if you touch live components m Never touch or hold the mains plug with wet hands m Only pull out the mains cable by the olug and never by the cable as this could damage it m Never unplug the mains plug during operation Observe the following information and ensure that Notes m he mains voltage and voltage indicated on the washing machine rating plate are the same The connected load and fuse requ
10. Drain and then pressing the Df button Programme end 0 and appear in the display panel The Dll button indicator lamp is off Removing laundry switching off the appliance 1 Open the door and remove the laundry 2 Press the button The appliance is switched off 3 Turn off the tap Note Not required for Aqua Stop models Notes Do not leave any items of laundry in the drum They may shrink in the next wash or discolour another item m Remove any foreign objects from the drum and the rubber seal risk of rusting m Wipe the rubber seal dry m Leave the door and detergent drawer open so that any residual water can evaporate Page 27 Always wait until the programme ends as the appliance could still be locked Then switch the appliance on and wait for it to unlock lf the display panel goes off at the end of a programme the energy saving mode is active Press any button to activate the panel 25 en Appliance settings E Appliance settings You can change the following settings The volume of the buttons and the information signals e g at the end of the programme m Select deselect the appliance s automatic switch off function Page 7 Switch the drum care information signal on off depending on the model From Page 14 onwards You will need to activate the setting mode in order to change these settings Pi o 3 Activating the setting mode 1
11. Is running or the programme length and the programme progress symbols when the washing programme has started Display panel Page 11 Note Foam detection lf the symbol also lights up in the display panel the washing machine has detected too much foam during the wash programme and automatically activated additional rinse cycles to remove the foam 24 Add less detergent to the next washing cycle with the same load If you want to lock the programme to prevent it from being inadvertently adjusted you can select the childproot lock as follows Child lock 3 sec You can lock the washing machine to orevent the functions you have set from being changed inadvertently To do this activate the childproof lock To activate deactivate press and hold the Finished in and buttons at the same time for approx three seconds The symbol is appears in the display panel m lights up The childproof lock is active flashes briefly The childproof lock is active and the programme selector was turned or a button was oressed Note The childproof lock remains active even once the washing machine has been switched off Before selecting the next programme deactivate the childproof lock Adding laundry After starting the programme you can add or remove laundry if necessary Press the Df button to do this The Bll button indicator lamp flashes and the machine checks whether it is possible to add laun
12. by a small box or a dash Contents Intended use 4 Safety instructions 5 Electrical safety 0000 5 Risk of INnjUTY n on annaa aaa 5 Safety for children 0 5 Environmental protection 7 Packaging used appliance 7 Tips on economical use T7 Main points in brief 8 Getting to know the appliance 9 Washing machine 05 9 Control panel 00 10 Display panel s saad a eawea hewa a 11 LAUNAY iaia a code ce a ae os 12 Prepare the laundry 12 Sorting laundry tod hereto es 12 Detergent 2 0008 13 Correct selection of detergent 13 Saving energy and detergent 13 Overview of programmes 14 Programmes on the programme selector dc ams acl Ge ge 6 8 Saks 14 lO GING aa ae ae ace we Gre are dre cis Gee 19 Dyeing bleaching 00 19 SOAKING 6 ce ee 19 Programme default settings 19 Temperature 0000 0a 20 Spin speed ecisewdedadene eau 20 PISMO sasis Gane eae riada 20 en Additional programme SCUINGSic a cow eww wea 21 SpeedPerfect asc seh 0780045000 21 PCOPCHECCls asserir adaa 21 POW aS 2ca o aca ewar ie otk See na 21 AQUA PIUS aea oad bona hte oi wok eek 21 Reduced Ironing 045 21 StaiNS ouaaa aaa 21 lt 4 Operating the appliance 21 Preparing the washing machine 21 Switching on the appliance selecting a programme
13. do not load any laundry Set the Drum Clean 90 C programme Open the detergent drawer Pour approximately 1 litre of water into compartment I Pour standard detergent into compartment II Note To prevent foaming only use half of the amount of detergent recommended by the detergent manufacturer Do not use detergents designed for woollens or delicates 7 Close the detergent drawer 8 Press the DII button 9 Switch off the appliance at the end of the programme Your washing machine is now ready to use re P MFU eS Positioning and connecting en Transportation Before switching on the appliance again E g when moving house Notes Preparatory work The transport braces must be 1 Turn off the tap removed 2 Reduce the water pressure In the Pour approx 1 litre of water into supply hose Page 29 Cleaning compartment Il select the Drain and maintenance filter in the water programme and start supply blocked This will prevent detergent from 3 Disconnect the washing machine flowing unused into the drain during from the mains the next wash 4 Drain the remaining water Page 28 cleaning and maintenance the drain pump Is blocked emergency draining 5 Remove the hoses Installing the transport braces 1 Remove the covers and keep them in a safe place Use a screwdriver if necessary 2 Insert all four sleeves Clip the mains cable securely in the holders Insert and tighten the
14. items rest in the water Notes Wool is of animal origin e g Angora alpaca llama sheep m Use a detergent that is suitable for machine washing wool Drain for the rinsing water e g after the setting Rinse Stop no final spin cycle Rinse Spin Extra rinse spin with speed that can be selected Note The Aqua Plus button is set by default for this programme 0 1600 r rpm If you require a spin cycle only press the button to deactivate the function Reduced Ironing Reduced load for the SpeedPerfect setting Max spin speed depending on the model Programme depending on the model 15 en Overview of programmes Programme type of laundry information Settings Drum Clean 0kg Programme for cleaning and caring for the drum and the outer tub 80 90 C e g before running the first wash cycle if washing frequently at a 1200 low temperature 40 C or lower or if an odour has developed after a a prolonged period of non use The Drum Clean indicator light flashes when you use have not used a programme of 60 C or higher for a long time Notes m Run the Trommelpflege drum care programme without any laundry m Use washing powder or a detergent containing bleach To prevent foaming only use half the amount of detergent recommended by the detergent manufacturer Do not use detergent designed for woollens or delicates SuperQuick 15 Max 2 kg Extra short programme of approx
15. laundry stays in the water after the final rinse You can select Spulstopp Rinse Stop to prevent creasing if the laundry will not be taken out of the washing machine immediately after the programme has ended To continue end the programme Page 25 The maximum speed that can be set depends on the model and programme that has been selected 20 Finished in Before starting the programme you can preselect the programme end Ready in time in hourly increments h hour up to a maximum of 24 hours To do this 1 Select a programme The programme duration is displayed for the selected programme e g 2 30 hours minutes 2 Press the Finished in button repeatedly until the required number of hours is displayed Note The setting values are increased using the Finished in button and decreased using the Finished in button 3 Press the Df button The programme starts The selected number of hours e g 8 h is shown in the display panel and counts down until the wash programme starts The duration of the programme is then displayed Note The length of the programme is automatically adjusted when the programme is running Changes to the default programme settings or programme settings may also change the programme duration After starting the programme if a Finished in time has been selected and the wash programme has not yet Started you can change the oreselected number of hours as f
16. load sensing function optimally adjusts the water consumption and programme duration in each programme Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning If the laundry is extremely unevenly distributed the speed is reduced or the spin cycle is not performed for safety reasons Note Place large and small items of laundry evenly in the drum Page 22 Page 32 AquaSensor depending on the model During the rinse cycle the AquaSensor checks the degree of turbidity turbidity is caused by dirt and detergent residue of the rinsing water The duration and the number of rinse cycles depend on the turbidity of the water Sensors en Cleaning and maintenance Warning Danger of death There is a risk of electric shock if you touch live components Switch off the appliance and pull out the mains plug Z Warning Risk of poisoning Toxic vapours can be produced by cleaning agents that contain solvents e g cleaning solvent Do not use cleaning agents that contain solvents Caution Damage to the appliance Cleaning agents that contain solvents e g cleaning solvent can damage Surfaces and components in the machine Do not use cleaning agents that contain solvents Prevent detergent residue from building up and odours from forming by following thes
17. the appliance E Nr FD E no Product number FD Production number You can find this information depending on the model On the inside of the door in the opened service flap and on the rear of the appliance Trust the expertise of the manufacturer Contact us for assistance By doing so you will ensure that the repairs are carried out by trained service personnel using genuine spare parts 34 Consumption rates en Consumption rates Energy and water consumption programme duration and residual moisture for the main washing programmes approximate values Programme Energy WELGI Programme consumption consumption duration Cottons 20 C 9 kg 0 25 kWh 90 2 Y4 h Cottons 40 C 9 kg 1 10 kWh 90 3h Cottons 60 C 9 kg 1 06 kWh 90 2 Y4 h Cottons 90 C 9 kg 2 14 kWh 100 2 Aah Easy Care 40 C 4 kg 0 70 kWh 61 2h Mixed Fabrics 40 C 4kg 0 60 kWh A5 1 h Delicates Silk 30 C 2kg 0 19 kWh oa Yah Wool 30 C 2 kg 0 19 kWh AQ Yah Programme Approximate information on the residual moisture WAWS32 WAW28 WAW24 WAW20 Max 1600 Max 1400 Max 1200 Max 1000 rpm rpm rpm rpm Cottons 44 48 03 62 Easy Care 40 40 40 40 Delicates Silk 30 30 30 30 Wool 45 45 45 45 The values may deviate from the indicated values depending on water pressure water hardness water inlet temperature ambient temperature type of laundry amount and soiling of laundry detergent used fluc
18. they are supervised or have been instructed by a responsible person Children must not perform cleaning or maintenance work unsupervised m Keep pets away from the washing machine Read the Instruction Manual and Installation Instructions and all other information supplied with the washing machine and use the machine accordingly Retain the documents for subsequent use Safety instructions Electrical safety Z Warning Danger of death There is a risk of electric shock if you touch live components Never touch or hold the mains plug with wet hands a Only pull out the mains cable by the plug and never by the cable as this could damage it Risk of injury A Warning Risk of injury a When the washing machine is lifted by its protruding parts e g the washing machine door the components may break off and cause injuries Do not lift the washing machine by protruding parts a lf you climb on the washing machine the worktop may break and cause injuries Do not climb onto the washing machine a lf you lean on the washing machine door when it is open the washing machine may tip over and cause injuries Do not lean on the washing machine door when it is open Safety instructions en a Reaching into the drum when it is turning can cause injuries to hands Do not reach into the drum when it is turning Wait until the drum has stopped turning Z Warning Risk of scalding When yo
19. 0 WZ 20490 WZ 20510 WZ 20520 Installing the appliance in a kitchenette Z Warning Danger of death There is a risk of electric shock if you touch live components Do not remove the appliance covering olate 38 Notes m Recess width of 60 cm required Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets Removing the transport locks Caution Damage to the appliance he machine is secured for transportation using transport locks If the transport locks are not removed the drum for example may become damaged when the machine is operated Before using the appliance for the first time make sure that you completely remove all four transport locks Keep the locks in a safe place m To prevent transport damage from occurring if the appliance is moved at a later date you must refit the transport locks before transporting the appliance Note Keep the screws and sleeves in a safe place 2 Unscrew and remove all four transport brace screws Remove the sleeves To do this remove the mains cable from the holders 3 Insert the covers Lock the covers firmly in place by applying pressure to the snap in hooks Hose and cable lengths m Left hand connection O D gt lt oO E Positioning and connecting en Right hand connection S 2 gt lt oO 5 Tip The following are available fro
20. 2 litre of water and pour it into compartment II not suitable for outdoor clothing sportswear or items stuffed with down Use less detergent in the next washing cycle Is the appliance aligned Align the appliance gt Page 41 Are the appliance s feet fixed Secure the appliance s feet gt Page 41 Have the transport braces been removed Remove the transport braces Page 38 Has there been a power failure Have the fuses blown Reset replace the fuses If the fault occurs repeatedly call customer services some phosphate free detergents contain water insoluble residue Select Rinse or brush the laundry after washing The water level is too high It is not possible to add laundry Close the door immediately if necessary Press the Dl button to continue the programme P and appear inthe The door is unlocked It is possible to add laundry display panel when the cycle is paused If you cannot rectify a fault yourself after switching the machine off and on again or a repair is required m switch off the appliance and pull out the mains plug m urn off the tap and call customer services 33 en After sales service After sales service If you cannot rectify a fault yourself contact customer services gt Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers Please give customer services the product number E no and the production number FD of
21. Aqua Plus Reduced Ironing Max 1 kg 40 C w 0 600 rom EcoPerfect SpeedPerfect Aqua Plus Reduced Ironing Max 2 5 kg 00 C w 0 1200 rpm EcoPerfect SpeedPerfect Aqua Plus Max 2 5 kg 00 C w 0 1200 rpm EcoPerfect SpeedPerfect Aqua Plus Programme default settings en Programmer type of laundry information Settings Shirts Max 2 kg Non iron shirts or blouses made of cotton linen synthetic fibres or 60 C blended fabrics w 0 800 rpm Notes m ohirts blouses are only given a short spin on the EcoPertect speedPertect Reduced Ironing setting Hang them up to dry while still Prewash dripping wet gt Self smoothing effect Aqua Plus m Use the Delicates Silk programme to wash shirts blouses made of silk or delicate fabrics Reduced load for the SpeedPerfect setting Max spin speed depending on the model Programme depending on the model Reduced Ironing Starching Note Laundry must not be treated with fabric softener Starching is possible in all wash programmes if liquid starch is used Measure starch into compartment amp in accordance with the manufacturer s instructions clean first if necessary Dyeing bleaching Dye should only be used in normal household quantities Salt may damage Stainless steel Always follow the dye manufacturer s Instructions Do not use the washing machine to bleach clothes Soaking 1 Switch on the appliance 2 Sele
22. Max spin speed depending on the selected programme and model m O nospin cycle draining only Page 20 w Rinse Stop Page 20 Finished in time e g 2 30 Programme duration depends on the programme selection in h min hours minutes Preselection of end time 1 24h Programme ends after h h hours Load recommendation e g kg 97 depending on the selected programme Information on energy and water consumption Page 7 Energy consumption display Getting to know the appliance en Further information epl Stains gt Page 21 Programme progress uy Prewash 3 Washing ey Rinse Spin Q Programme end Programme end during Rinse Stop P Pause e g to reload laundry Washing machine door D The washing machine door can lights up be opened D When the programme has flashes started The washing machine door is not closed properly Tap as Tap not turned on no water lights up pressure ra Water pressure too low may flashes increase the programme duration Childproof lock gt Page 24 C gt Childproof lock activated lights up C gt Childproof lock activated flashes programme selector adjusted Foam detection NSS Page 24 lights up Fault display E Page 31 Signal setting 0 4 Page 26 Switching off the appliance automatically On OFF Page Page 26 11 en Laundry Laundry Prepare the laundry Caution Dama
23. Wery StraBe 34 81739 Munchen DEUTSCHLAND 9001004212 9407
24. ance or our Nominal current 10 A customer services Page 34 Nominal power 2300 W Water pressure 100 1000 kPa 1 10 bar Power consumption when switched off 0 12 W Power consumption when ready for use left on mode 0 43 W Included with the appliance 36 fe Mains cable Bag m Installation and operating instructions m Customer services location directory m Warranty m Cover caps for openings after the transport braces have been removed m Adaptor with sealing washer from 21 mm 1 2 to 26 4 mm 3 4 Water supply hose on Aqua Stop models Water drain hose Elbow for securing the water drain hose Water supply hose on standard Aqua Secure models depending on the model In addition a hose clamp 24 40 mm diameter available from specialist dealers is required to connect the water drain hose to a siphon Positioning and connecting en Useful tools Spirit level for aligning m Spanner with WAF18 for loosening the transport braces and WAF17 for aligning the appliance feet Safety instructions Warning Risk of injury m Ihe washing machine is very heavy Be careful when lifting transporting the washing machine m When the washing machine is lifted by its protruding parts e g the washing machine door the components may break off and Cause injuries Do not lift the washing machine by orotruding parts m Ifthe hose and mains cables ar
25. button is set by default If you do not require a pre wash cycle press the button to deactivate the function Night Wash Especially quiet programme for washing during the night suitable for cotton linen synthetic and blended fabrics Notes m Final buzzer deactivated m Programme ends without completing a final spin cycle To end the programme select a spin speed or set the programme selector to Abpumpen Empty Then press the D0 button Lingerie For delicate washable underwear e g made of velvet lace Lycra silk or satin Duvet Machine washable items stuffed with synthetic fibres such as pillows quilts and bedspreads also suitable for items stuffed with down Note Wash large items separately Use a detergent designed for delicates and follow the instructions on the item s care label Use detergent sparingly Down Wear Machine washable fabrics stuffed with down such as pillows and duvets also suitable for items stuffed with synthetic fibres Note Wash large items separately Use a detergent designed for delicates and follow the instructions on the item s care label Use detergent sparingly Reduced load for the SpeedPerfect setting Max spin speed depending on the model Programme depending on the model 18 Max 3 5 kg 40 C w 0 800 rpm EcoPerfect SpeedPerfect Prewash Aqua Plus Max 4 kg 40 C wy 0 1200 rpm EcoPerfect SpeedPerfect Prewash
26. ct the Cottons 30 C programme 3 Pour soaking agent detergent into compartment Il in accordance with the manufacturer s instructions 4 Press the Dll button The programme starts 5 After approx 10 minutes press the Dll button to pause the programme 6 Leave the laundry to soak for as long as required then either press the Df button again to continue the programme or change the programme Notes Load laundry of the same colour m No additional detergent is required the soaking solution is used for washing Programme default settings The default programme settings are displayed in the display panel after selecting the programme You can change the default settings An overview of all programme settings which can be selected depending on the programme can be found from Page 14 19 en Programme default settings Temperature Depending on what stage the programme is in you can change the set temperature before and during the programme The maximum temperature that can be set depends on the programme that has been selected Spin speed Spin Depending on what stage the programme is in you can change the spin speed in rom revolutions per minute before and during the programme Setting 0 The rinsing water is drained but there is no final spin The laundry stays wet inside the drum e g for items that should not be spun Setting w Spulstopp Rinse Stop no final spin The
27. d Ironing selected depending on the model gt Page 21 m Isthe selected speed too low Not a fault the unbalanced load detection system is adjusting an imbalance m Nota fault the unbalanced load detection system is adjusting an imbalance by repeatedly distributing the laundry m Nota fault the foam detection system is active a rinse cycle has been switched on Not a fault the programme sequence is optimised for the specific washing process This may change the length of the programme shown in the display panel m Nota fault the effect of the care product is not affected m Clean the insert if necessary Faults Faults and what to do about them en Cause Remedy Odours in the washing machine may also be leaking from the detergent drawer Loud noises vibrations and machine movement during the spin cycle The display panel indicator lights do not work while the appliance is running There is detergent residue on the laundry P appears in the display panel when the cycle is paused Run the Drum Clean or Cottons 90 C programme without laundry Add washing powder or a detergent containing bleach Note To prevent foaming only use half the amount of detergent recommended by the detergent manufacturer Do not use detergent designed for woollens or delicates The symbollightsup Have you used too much detergent in the display panel Foam Mix one tablespoon of fabric softener with 1
28. dry If the following appears in the display panel Both the P and symbols light up it is possible to add laundry m P lights up It is not possible to add laundry To continue the programme press the Dll button The programme continues automatically Notes Do not leave the door open for too long when adding laundry as water from the laundry may leak out For safety reasons the door remains locked when the water level or temperature is high or while the drum is turning and it is not possible to add laundry during this time m The load display is not active during reloading Changing the programme If you have started the wrong programme by mistake you can change the programme as follows 1 Press the Df button 2 Select another programme 3 Press the Df button The new programme starts from the beginning Cancel the programme For programmes at high temperatures 1 Press the Df button 2 To cool down laundry Select Rinse 3 Press the Dll button For programmes at low temperatures 1 Press the Df button 2 Select Spin or Drain 3 Press the DII button Programme end during rinse hold In the display panel w flashes and the preset spin speed and remaining programme length are displayed for the selected programme Continue the programme by Pressing the Dll button or Operating the appliance en m Changing the spin speed or setting the programme selector to
29. e instructions Notes m Ensure the room in which the washing machine is set up is well ventilated m Leave the door and detergent dispenser tray open slightly when the washing machine is not in use Occasionally run a wash using the Cottons 60 C programme and powder detergent 27 en Cleaning and maintenance Machine housing control panel m Wipe the housing and the control panel with a soft damp cloth m Remove the detergent residue immediately Do not clean with a water jet Drum Use chlorine free cleaning agents do not use steel wool If there are odours in the washing machine or to clean the drum run the Drum Clean 90 C programme without laundry Add washing powder Descaling Descaling should not be necessary if the detergent is measured out correctly However if it is required follow the manufacturer s instructions for the descaling agent Suitable descalers can be obtained via our website or from customer services Page 34 Detergent drawer and housing If the washing machine contains detergent or fabric softener residues 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 To remove the insert Push the insert upwards from below with your finger 3 Clean the detergent dispenser tray and insert with water and a brush and dry it Clean the inside of the housing as well 28 4 Fit the insert and lock It in place push the cylind
30. e not routed properly there is a risk of tripping and injury Lay hoses and cables in such a way that there is no risk of tripping Caution Damage to the appliance Frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors Caution Water damage The connection points for the water Supply hose and water drain hose are under high water pressure To prevent leaks and water damage you must follow the instructions in this section Notes m In addition to the safety information listed here the local water and electricity supplier may have special requirements m If in doubt have the appliance connected by a specialist 37 en Positioning and connecting Installation surface Note The washing machine be stable so that it does not move around The installation surface must be firm and level m soft floors floor coverings are not Suitable Installation on a base ora wooden joist floor Caution Damage to the appliance The washing machine may wander and tip topple from the base when spinning The feet of the appliance must be secured with holding brackets Order no WMZ 2200 WX 9756 CZ 110600 Z 7080X0 Note On wooden joist floors install the washing machine m In a corner if possible m On a water resistant wooden board min 30 mm thick which is screwed tightly to the floor Installation on a platform with drawer Platform order no WMZ 2049
31. els of the different programmes when choosing your programme settings and decide on an energy and water saving programme setting Energy saving mode The display panel lighting goes out after a few minutes and the Dll button flashes Press any button to activate the lighting Energy saving mode is not activated if a programme is running Automatic switch off If the appliance is not operated for a orolonged period it may automatically switch off before the programme starts and when the programme has ended to save energy Press the main switch again to switch on the appliance Switching the gt Page 26 function on off If the laundry is subsequently dried in a tumble dryer select the spin speed according to the tumble dryer manufacturer s instructions en Main points in brief Main points in brief Connect the mains Open the door To switch on press Select a plug Turn on the the button programme e g tap Cottons rm Sort the laundry Observe the Load the laundry Close the door maximum load depending on the model on the display panel D gt Add detergent If necessary change the default programme otart the settings and or select additional settings programme E End of the programme Open the door and To switch off press Turn off the tap remove the laundry the button for models without Aqua stop Getting to Know the appliance en Getting to know the applia
32. er onto the guide pin 5 Push in the detergent drawer Note Leave the detergent drawer open so that any residual water can evaporate The drain pump is blocked emergency draining Z Warning Risk of scalding When you wash at high temperatures the water gets very hot If you come Into contact with the hot water you may be scalded Allow the water to cool down 1 Turn off the tap so that no more water can flow in and has to be drained via the drain pump 2 Switch off the appliance Pull out the mains plug 3 Open and remove the service flap 4 Take the drain hose out of the retainer Remove the sealing cap and pour the water out into a suitable container Replace the sealing cap and place the drain hose back in the retainer 5 Carefully unscrew the pump cover residual water may leak out Clean the interior Oump cover thread and pump housing The impeller in the drain pump must be able to rotate Refit the pump cover and screw it on tightly The handle must be ina vertical position 6 Place the service flap back on lock it into place and close it Note To prevent unused detergent from flowing straight into the drain during the next wash Pour 1 litre of water into compartment Il and start the Drain programme The drain hose at the siphon is blocked 1 Switch off the appliance Pull out the mains plug 2 Loosen the hose clamp Carefully remove the drain hose residual water
33. g Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot water and laundry If possible leave it to cool down first Z Warning Risk of injury You may injure your hands if you reach into the drum while it is turning Do not reach into the drum when it is turning Wait until the drum has stopped turning Caution Water damage Any escaping water may cause water damage Do not open the door if water can be seen through the glass 30 Faults and what to do about them en Information on the display panel Display Cause Remedy P and The door is unlocked It is possible to add laundry P m he temperature is too high Wait until the temperature drops m Ihe water level is too high It is not possible to add laundry Close the door immediately if necessary Press the Df button to continue the programme flashes m Laundry may be caught Open and close the door again and press the Dl button m f necessary push the door closed or remove some laundry and then push it closed again m f necessary switch the appliance off and on again set the programme and make your individual settings start the programme lights up m urn onthe tap fully m supply hose kinked trapped m The water pressure is too low Clean the filter gt Page 29 E 18 m he drain pump is blocked Clean the drain pump gt Page 28 m The drain hose drain pipe
34. ge to the appliance fabrics Foreign objects e g coins paper clips needles nails may damage the laundry or components in the washing machine Therefore note the following tips when preparing your laundry Empty pockets Look out for metal items paperclips etc and remove them Wash delicates in a laundry bag tights underwired bras etc Close any zips button up any cover buttons Brush sand out of pockets and collars Remove curtain fittings or place Curtains in a laundry bag Sorting laundry Sort your laundry according to the care instructions and manufacturer s information on the care labels depending on 12 Type of fabric fibre Colour Note Laundry may discolour Wash white and coloured items separately Wash new coloured items separately the first time you wash them Soiling Wash laundry with the same level of soiling together Some examples of soiling levels can be found on Page 13 Light Do not prewash select the SpeedPerfect setting if necessary Normal Heavy Load less laundry select a programme with prewash Stains Remove pretreat stains while they are fresh Firstly dab with soapy water do not rub Then wash the items of laundry with the appropriate programme Stubborn or dried in stains can sometimes only be removed by washing several times Symbols on the care labels Note The numbers in the symbols indicate the maximum washing temperature t
35. hat may be used KY Suitable for normal washing process e g Cottons programme KE A gentle washing process is required e g Easy Care programme EK An especially gentle washing process is required e g Delicate Silk programme Suitable for washing by hand e g Woollens programme Og Do not machine wash Detergent Correct selection of detergent The care label is crucial for selecting the correct detergent temperature and treatment of the laundry gt See also www sartex ch If you visit www cleanright eu you will find further information on detergents care products and cleaning agents for domestic use Standard detergent with optical brighteners Suitable for boil washable white laundry made from linen or cotton Programme Cottons cold max 90 C Detergent for colours without bleach or optical brighteners Suitable for coloured laundry made from linen or cotton Programme Cottons cold max 60 C Detergent for colours delicates without optical brighteners Suitable for coloured laundry made from easy care fibres synthetic fibres Programme Easy Care cold max 60 C Detergent for delicates Suitable for delicate fine fabrics silk or viscose Programme Delicate Silk cold max 40 C Detergent for woollens Suitable for wool Wool programme cold max 40 C Detergent en Saving energy and detergent For light and normal soiling you can save energy lower washing te
36. ing Dose the detergents and care products according to m Water hardness ask your water Supply company m he manufacturer s instructions on the packaging he amount of laundry m soiling Page 13 Filling Z Warning Eye skin irritation Detergents and care products may spray out if the detergent drawer is opened while the machine is in operation Open the drawer carefully Rinse eyes skin thoroughly if they come into contact with detergents or care oroducts If accidentally swallowed seek medical advice Note Dilute viscous fabric softener and fabric conditioner with a little water This prevents blockages in the washing machine s piping Pour the detergent and care products into the appropriate compartments Measuring for liquid detergent aid A Compartmen Detergent for the main t Il wash water softener bleach stain remover Operating the appliance en Compartmen Fabric softener liquid t starch do not exceed max Compartmen Detergent for prewash tl 1 Pull out the detergent drawer as far as possible 2 Add detergent and or care products 3 Close the detergent drawer Measuring aid for liquid detergent depending on the model Position the measuring aid for dosing the correct amount of liquid detergent 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 Slide the measuring aid forwards fold it down and click it into place 3 Rei
37. ired are specified on the rating olate he washing machine is only connected to an alternating current Supply via a properly installed earthed socket m Ihe mains plug fits the socket m Ihe cable cross section is adequate m The earthing system is properly installed Ihe mains cable is only replaced by a qualified electrician if this is necessary Replacement mains cables are available from customer Services No multiple plugs couplings or extension cables are used m lf an earth leakage circuit breaker is used only a type which displays the symbol is used Only this symbol guarantees compliance with the currently applicable regulations m he mains plug can be accessed at all times m Ihe mains cable is not kinked squashed altered or cut through 42 m he mains cable does not come into contact with heat sources Before washing for the first time The washing machine was thoroughly tested before leaving the factory In order to remove any water which may be left over from the test run the first washing cycle without any laundry Notes m The washing machine must be correctly installed and connected from Page 36 m Never use a damaged machine Inform customer services Preparatory work 1 Check the machine 2 Remove the protective film from the control panel Connect the mains plug Turn on the tap un the programme without laundry Switch on the appliance Close the door
38. is blocked Clean the drain hose at the siphon Page 29 E23 There is water in the base trough the appliance is leaking Turn off the tap Call customer services gt Page 34 Ce The childproof lock is activated deactivate it gt Page 24 KS lights up Too much foam has been detected and an additional wash cycle has been activated Add less detergent to the next washing cycle with the same load The indicator light for Run the Drum Clean 90 C programme or a 60 C programme to clean and care the Drum Clean for the drum and the outer tub programme flashes Notes depending onthe Run the programme without laundry model m Use washing powder or a detergent containing bleach To prevent foaming only use half the amount of detergent recommended by the detergent manufacturer Do not use detergent designed for woollens or delicates m switching the information signal on off gt Page 26 Other displays switch off the appliance wait for five seconds and then switch it on again If the display appears again call customer services gt Page 34 31 en Faults and what to do about them Faults and what to do about them Faults Water is leaking fromthe machine The machine is not filling m with water Detergent is not being dispensed The door cannot be opened The programme will not Start The drum briefly jerks or judders after the programme has started The water is not draining Wa
39. m m Inthe EcoPerfect setting the washing temperature is lower than the selected temperature If you would like to set a EcoPerfect speedPertect particular washing temperature use the programme without Prewash the EcoPerfect setting or if necessary set a higher Aqua Plus temperature IheSpeedPerfect setting is suitable as a short programme for lightly soiled laundry Easy Care Max 4 kg synthetic or blended fabrics amp 60 C wy 0 1200 rpm EcoPerfect SpeedPerfect Prewash Aqua Plus Reduced Ironing Reduced Ironing Reduced load for the SpeedPerfect setting Max spin speed depending on the model Programme depending on the model 14 Overview of programmes en Programmer type of laundry information Settings Mixed Fabrics Max 4 kg Mixed load of cottons and synthetic fabrics E 0 00O pm EcoPerfect SpeedPerfect Prewash Aqua Plus Reduced Ironing Delicates Silk Max 2 kg For delicate washable fabrics e g made of silk satin synthetic 40 C fibres or blends e g silk blouses silk scarves w 0 800 rpm Note Use a detergent suitable for machine washing delicates or silk EcoPerfect SpeedPerfect Prewash Aqua Plus Reduced Ironing 4 Wool Max 2 kg Hand or machine washable fabrics that are made of wool or A0 C contain wool w 0 800 rpm particularly gentle wash programme to prevent laundry from shrinking with longer pauses in the programme during which the
40. m specialist dealers customer services Extension for Aqua Stop and cold water supply hose approx 2 50 m order no WM 22380 WZ 10130 CZ 11350 Z 7070X0 A longer supply hose approx 2 20 m for standard models individual component number for customer services 00353925 Water inlet Warning Danger of death There is a risk of electric shock if you touch live components Do not immerse the Aqua Stop safety valve in water it contains an electric valve Notes m Only operate the washing machine using cold mains water Do not connect the machine to the mixer tap of an unpressurised hot water boiler Do not use a used supply hose Only use the supply hose supplied or one that was purchased from an authorised specialist retailer Do not kink or squash the water Supply hose 39 en Positioning and connecting Do not alter shorten cut through the water supply hose otherwise its strength is no longer guaranteed m Only tighten the screw connections by hand If the screw connections are tightened too much with a tool pliers the thread may become damaged m When connecting toa 21 mm 1 2 tap first fit an adapter with a sealing washer from 21 mm 1 2 to 26 4 mm 3 4 supplied depending on the model Optimum water pressure in the supply network At least 100 kPa 1 bar Maximum 1000 kPa 10 bar When the tap is open the water flow rate is at least 8 I min lf the wa
41. may leak out 3 Clean the drain hose and siphon connecting piece Cleaning and maintenance en 4 Re attach the drain hose and secure the connection point using the hose clamp Filter in the water supply blocked First reduce the water pressure in the supply hose 1 Turn off the tap 2 Select any programme except Sp len Schleudern Abpumpen Rinse Spin Empty 3 Press the I button Allow the programme to run for approximately 40 seconds 4 Press the button The appliance is switched off 5 Pull out the mains plug Then clean the filter 1 Disconnect the hose from the tap Clean the filter with a small brush m nae 2 For standard and Aqua Secure models clean the filter on the rear of the appliance Remove the hose from the rear of the appliance Use pliers to remove the filter and then clean it 29 en Faults and what to do about them 1 Switch off the appliance Pull out the mains plug 2 Drain the water Page 28 3 Pull the emergency release downwards with a tool and release The door can then be opened 3 Connect the hose and check for leaks Faults and what to do about them Emergency release E g in the event of a power cut The programme continues when the power supply is restored However if the laundry has to be removed the washing machine door can be opened as follows Warnin
42. mperature and detergent Saving Soiling note Reduced Light temperature and No visible dirt or stains detergent Clothing has taken on some quantity as per body odour g the Light summer sports recommended clothing worn for a few dosage hours m shirts shirts blouses worn for up to one day m Guest bed linen and hand towels used for one day Normal Visible dirt or a few light stains g m shirts shirts blouses Sweat soaked worn a few times m Towels bedding used for up to one week Temperatureas Heavy per the care label Dirt and or stains clearly and detergent visible e g tea towels baby eae as Pel items work clothing recommended dosage for heavy soiling Note When measuring the amount of all detergents additives care products and cleaning agents please always check the manufacturer s instructions and information gt Page 22 13 en Overview of programmes Overview of programmes Programmes on the programme selector Programmer type of laundry information Settings Programme name Max load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable cold spin speed that can be selected w Rinse Stop 0 no spin cycle draining only Other programme settings that can be selected Cottons Max 9 kg 5 kg Hard wearing fabrics heat resistant fabrics made of cotton or linen 90 C Notes 0 1600 rp
43. nce Washing machine Detergent drawer gt Page 22 Operating display panel Door with door handle Open the door Close the door Service flap en Getting to Know the appliance Control panel lt Cottons EcoPerfect lt _ Prewash Easy Care Mixed Fabrics Delicates Silk A 2 Wool Note All the buttons are sensitive except for the main switch and only need to be pressed lightly Main switch for switching the washing machine on and off Press the button Programme selector for selecting a programme Overview of programmes Page 14 Additional programme settings Page 21 SpeedPerfect EcoPerfect Prewash Aqua Plus Reduced Ironing Stains 0 button for Starting a programme Interrupting a programme e g to add items of laundry Page 24 Cancelling a programme Page 25 HEU HLEBEHE E E AquaPlus Reduced Ironing Start Dil Reload Changing the default programme settings gt Page 19 m Temperature m Spin speed Spin m Finished in time L6 Child lock 3 sec to prevent the set functions from being changed accidentally Press and hold the Finished in and buttons at the same time for approx 3 seconds to activate this function gt Page 24 Display panel for settings and information gt Page 11 Display panel Default programme settings Temperature in C 90 cold Spin speed in rom w 0 1600
44. nsert the drawer Note Do not use the measuring aid for gel detergents and washing powder or for programmes with prewash or when the Ready in time is selected For models without a measuring aid pour the liquid detergent into the appropriate dispenser and place it in the drum Change the programme default settings You can use or change the default settings for this washing cycle To do this repeatedly press the corresponding button until the required setting is displayed 23 en Operating the appliance Note Pressing and holding the button automatically runs through the set values to the end Then press the button once more and you can then change the setting values again The settings are activated without needing to be confirmed The settings are not saved after switching off the washing machine Default programme settings gt Page 19 Select additional programme settings By selecting additional settings you can better adapt the washing process to your items of laundry The settings can be selected or deselected depending on the programme progress The button indicator lamps light up if a setting is activated The settings are not saved after switching off the washing machine Additional programme settings Page 21 Start the programme Press the Df button The indicator lamp lights up and the programme starts The display panel shows the Ready in time while the programme
45. o the specific type of stain Hot or cold water gentle or intensive washing and long or short soaking ensure that the wash programme sequence Is specially adapted to each type of stain This makes sure that stains are treated in the best possible way Note Pressing and holding the buttons automatically runs through the set values Operating the appliance Preparing the washing machine Note The washing machine must be correctly installed and connected From Page 36 Connect the mains plug Turn on the tap Open the door Check that the drum is completely drained Drain if necessary Pe 21 en Operating the appliance Switching on the appliance selecting a programme Press the button The appliance is switched on The Cottons programme set at the factory is then always displayed You can use this programme or select a different programme The programme selector can be turned in either direction Note If you have activated the childproof lock you must deactivate it before you can set a different programme Page 24 The indicator light on the programme selector lights up and the default programme settings for the selected programme appear in the display panel m Temperature m Spin speed he maximum load and the duration of the programme alternately m Information on water and energy consumption In appliances with a drum light The drum is lit after switching on the ap
46. ollows 1 Press the Dll button 2 Use the Finished in or button to change the number of hours 3 Press the Df button After starting the programme you can add or remove laundry if necessary Page 24 Additional programme settings An overview of all additional settings which can be selected depending on the programme can be found from Page 14 SpeedPerfect Washing in a shorter time while achieving a washing result that is consistent with but uses more energy than the selected programme without the SpeedPerfect setting Note Do not exceed the maximum load Overview of programmes Page 14 EcoPerfect Energy optimised washing by reducing the temperature while achieving a washing result that is consistent with the selected programme without the EcoPerfect setting Prewash For heavily soiled laundry Note Pour detergent into compartments I and Il Aqua Plus Higher water level and additional rinse cycle for particularly sensitive skin and or for areas with very soft water Reduced Ironing Reduces creasing thanks to a special spin sequence followed by fluffing and reduced spin speed Additional programme settings en Note The washing s residual moisture is increased Stains There are four types of stain to choose from Food based grease oil 2 Blood i Red wine ik Grass The washing machine adjusts the average washing temperature drum movement and soaking time t
47. pliance after opening and closing the door and after starting the programme The light switches off automatically Placing laundry into the drum Z Warning Danger of death ltems of laundry pretreated with cleaning agents that contain solvents 22 e g stain remover cleaning solvent may cause an explosion after being loaded into the washing machine Hand rinse these items of laundry thoroughly beforehand Notes Mix items of laundry of varying sizes Laundry items of different sizes distribute themselves better during the spin cycle Individual laundry items may cause an unbalanced load m Observe the maximum specified load Overfilling adversely affects the washing result and promotes creasing 1 Unfold presorted laundry items and place them in the drum 2 Make sure that no items of laundry are trapped between the door and the rubber seal and close the door The Bll button indicator lamp flashes and the programme settings appear in the display panel Measure and add detergent and care products Caution Damage to the appliance Cleaning agents and agents for pre treating laundry e g stain removers prewash sprays etc may cause damage if they come into contact with the surfaces of the washing machine Do not allow these agents to come into contact with the surfaces of the washing machine lf necessary immediately wipe away spray residue and other residues droplets with a damp cloth Dos
48. ter is not visible in the drum The spin result is not satisfactory Laundry is wet too damp The spin cycle runs several times The programme is taking longer than usual The length of the programme changes during the wash cycle Residual water in the care product compartment amp 32 Cause Remedy Attach the drain hose correctly or replace it m lighten the screw fitting on the supply hose Have you pressed the DO button m Isthe tap turned on m Could the filter be clogged Clean the filter Page 29 m sthe supply hose kinked or trapped The safety function is activated Stop the programme gt Page 25 Is c selected Rinse Stop no final spin gt Page 25 Can the door only be opened by the emergency release gt Page 30 Have you pressed the DO button or selected Finished in time Is the door closed m Isthe childproof lock activated Deactivate it gt Page 24 Not a fault the internal motor test may cause the drum to jerk or judder briefly when the wash programme starts m Is selected Rinse Stop no final spin gt Page 25 m Clean the drain pump gt Page 28 m Clean the drain pipe and or the drain hose Not a fault the water is below the visible area m Nota fault the unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed Distribute small and large items of laundry evenly in the drum m ls Reduce
49. ter pressure is higher than this a pressure reducing valve must be installed Connection Connect the water supply hose to the tap 26 4 mm and to the appliance not necessary for Aqua Stop models as this is permanently installed Model Standard 40 Model Aqua Secure Note Turn on the tap carefully checking the leak tightness of the connection points The screw connection is under mains water oressure Water outlet Z Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot water e g when draining hot water into a washbasin Do not reach into the hot water Caution Water damage lf the drain hose slips out of the washbasin or the connection point during draining due to high water oressure any escaping water may Cause water damage Secure the drain hose so that it cannot Slip out Caution Damage to the appliance fabrics If the end of the drain hose is immersed in the drained water water may be Sucked back into the appliance and may damage the appliance fabrics Make sure that m he plug does not block drainage from the washbasin The end of the drain hose is not immersed in the drained water Ihe water drains away quickly enough Note Do not kink the water drain hose or put strain on it lengthways Connection Drainage into a washbasin Drainage into a siphon
50. tuations in the power supply and the selected additional functions Information on residual moisture based on programme dependent spin speed limit and maximum loads 35 en Technical data Efficiency test programmes for cotton fabrics The following programmes standard programmes indicated by lt _ are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption Standard programmes for Cottons in accordance with the EU directive no 1015 2010 Programme temperature button Load Approximate programme duration lt __ Cottons lt _ EcoPerfect 9 kg 4 3 4 h lt __ Cottons lt __ EcoPerfect 4 5 kg Avah lt __ Cottons lt _ EcoPerfect 4 5 kg Avah Programme setting for testing and energy labelling in accordance with Directive 2010 30 EU with cold water 15 C The programme temperature information is based on the temperature stated on the care label for the fabrics The actual washing temperature may deviate from the stated programme temperature for energy saving reasons Technical data Positioning and connecting Dimensions 850 x 600 x 590 mm height x width x depth Weight Note Check the machine for transport 70 85 kg depending on model damage Never use a damaged machine If you have any complaints Mains connection contact the dealer from whom you Mains voltage 220 240 V 50 Hz purchased the appli
51. u are washing at high temperatures there is a risk of scalding if you come into contact with hot water e g if hot water is being drained into a wash basin Do not reach into the hot detergent solution Safety for children Z Warning Danger of death If children play with the washing machine they may get into life threatening situations or injure themselves Do not leave children unattended near the washing machine Do not let children play with the washing machine en Safety instructions Z Warning Danger of death Children may lock themselves in appliances putting their lives at risk For appliances that have reached the end of their service life a Disconnect the mains plug a Cut through the mains cable and remove it along with plug m Destroy the lock on the washing machine door Z Warning Risk of suffocation Children may become wrapped in packaging film or packing parts if allowed to play with them or they may pull them over their heads and suffocate Keep packaging film and packaging parts out of the reach of children A Warning Risk of poisoning Detergents and care products may be poisonous if consumed Keep detergents and care oroducts out of the reach of children Z Warning Eye skin irritation Detergents and care products may cause Irritation if they come into contact with the eyes or skin Keep detergents and care products out of the reach of children
Download Pdf Manuals
Related Search