Bosch WAE24063GB washing machine
Contents
1. water connection Useful tools Spirit level for installation Hose and cable lengths 0127012141011010 R0 11410102 I min 60 cm max 100 cm Available from specialist dealers the after sales service Extension for Aqua Stop or cold water inlet hose approx 2 50 m order no WMZ2380 WZ10130 CZ11350 Z7070X0 Longer inlet hose approx 2 20 m for standard model Removing the transport braces Water CONNECTION cepenaing on model Risk of electric shock Do not immerse the Aqua Stop safety device in water contains an electric valve To prevent leaks or water damage observe the instructions in this section Caution only operate the washing machine using cold drinking water Do not connect to the mixer tap of an unpressurised hot water boiler Do not use a used inlet hose Only use the inlet hose supplied or one which was purchased from an authorised specialist dealer Ifin doubt have a technician connect the appliance Water inlet Water inlet hose Caution do not bend squash modify or cut through otherwise its strength is no longer guaranteed Optimum water pressure in the supply network 100 1 000 kPa 1 10 bar When the tap is on the water flow is at least 8 I min f the water pressure is higher than this a pressure reducing valve must be installed Model Aqua Stop Standard Aqua Secure Before using the appliance for the first time make sure that y2. gt Operating instructions What to do if Washing machine You will be charged if a technician is called out even during the warranty period You can find your nearest after sales service in the enclosed list Please give the after sales service the product number E no and the production number FD of the appliance You will find the identification plate containing this information on the frame of the loading door when the door is open and in the thickly Product number Production number bordered area of the rating plate on the back of the appliance Please help us to avoid unnecessary call outs by quoting the product and production numbers This will also save you the associated additional costs Aq ua St 07 0 Warran ty only for appliances with Aqua Stop EE Installation In addition to warranty claims against the vendor from the purchase agreement and to our i i appliance warranty we will pay damages under the following conditions Instructions 1 Ifa fault in our Aqua Stop system causes water damage we will reimburse damages caused to private customers 2 The liability guarantee is valid for the service life of the appliance 3 It is a prerequisite of all warranty claims that the appliance with Aqua Stop must have been set ad pee cted Beil in accordance cour a this includes a Contents Page correctly fitted Aqua Stop extension original accessories M Safety instructions 0048 1 Our warranty goes n
3. 40474 Dimensions width x depth x height 60 x 59 x 84 2 cm lf a residual current circuit breaker is used only use a type which displays this symbol Ex Weight 69 83 kg depending on model Only this symbol guarantees compliance with the currently applicable regulations Mains connection Nominal voltage 220 240 V 50 Hz Nominal current 10 A Nominal power 2000 2300 W Water pressure 100 1000 kPa 1 10 bar Do not plug in or unplug the mains plug with wet hands Pull the appliance plug out of the socket at the plug only not by the cable Manufacturer gt Operating instructions Test programmes According to currently valid IEC 60 456 6 After sales service Before you call the after sales service please make sure that you cannot remedy the fault yourself gt Operating instructions What to do if You will be charged if a technician is called out even during the warranty period You can find your nearest after sales service in the enclosed list Please give the after sales service the product number E no and the production number FD of the appliance You will find the identification plate containing this information on the frame of the loading door when the door is open and in the thickly Product number Production number bordered area of the rating plate on the back of the appliance Please help us to avoid unnecessary call outs by quoting the product and production numbers This will also save you
4. M Scope of delivery 0 eee 2 Hose and cable lengths 2 M Removing the transport braces 3 M Water connection 0 00 eee 4 Mm Alignment saved wees ek cae kee es ey 5 M Electrical connection 00 5 HM Transportation e g when moving home 6 E Technical specifications 6 E After sales service 00008 7 Aqua Stop warranty aaa aaan aaa aaa 7 Read these instructions before switching on the washing machine Also observe the separate Instruction manual Keep all documents for use in the future or for the subsequent owner en Safety instructions The washing machine is heavy take care when lifting Caution frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors The washing machine could be damaged Do not lift the appliance by protruding components e g the washing machine door n addition to the instructions provided in this document special regulations from the relevant water and electric utility companies may apply Ifin doubt have a technician connect the appliance Lay hoses and cables in such a way that there is no risk of tripping Installation surface The machine must be stable so that it does not move around The installation surface must be firm and level Soft floors floor coverings are not suitable Installation on a pedestal A
5. N The feet of the washing machine must be secured with holding brackets order no WMZ2200 WX9756 CZ110600 Z7080X0 Installation on a wood joist floor A N If possible place the washing machine in a corner Screw a water resistant wooden board min 30 mm thick to the floor The feet of the washing machine must be secured with holding brackets order no see above Installing the appliance i Install the appliance before connecting it to the power supply Installation in a kitchenette underneath the worktop or fitted in a cabinet Recess width of 60 cm required Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets Installation underneath the worktop Risk of electric shock Instead of the appliance covering plate you must have a metal cover fitted by an expert order no WMZ2420 WZ10190 Recess width of 60 cm required Moisture inside the drum is due to final testing Scope of deli ver 4 depending on model otandard Aqua Stop Aqua Secure Zh We RAL re RIAN Mains cable Water outlet Water inlet i oon gun S ry Yy Covers Elbow for fixing the drainage hose in place Wrench _ _ __ depending on model Also required depending on the connection 1 hose clamp 24 40 mm exclusive dealers to connect to a siphon page 4
6. Safety instructions The washing machine is heavy take care when lifting Caution frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors The washing machine could be damaged Do not lift the appliance by protruding components e g the washing machine door n addition to the instructions provided in this document special regulations from the relevant water and electric utility companies may apply Ifin doubt have a technician connect the appliance Lay hoses and cables in such a way that there is no risk of tripping The machine must be stable so that it does not move around The installation surface must be firm and level Soft floors floor coverings are not suitable Installation on a pedestal A N The feet of the washing machine must be secured with holding brackets order no WMZ2200 WX9756 CZ110600 Z7080X0 Installation on a wood joist floor A N If possible place the washing machine in a corner Screw a water resistant wooden board min 30 mm thick to the floor The feet of the washing machine must be secured with holding brackets order no see above Installing the appliance i Install the appliance before connecting it to the power supply i Installation in a kitchenette underneath the worktop or fitted in a cabinet Recess width of 60 cm required Only install the washing machine un
7. ces to prevent damage to the machine page 6 Store the screw and sleeve screwed together until they move freely in the sleeves Always displace bolt and sleeve together as shown in the illustration All bolts and sleeves must be removed WEG connection 0270121410110100 11410102 Risk of electric shock Do not immerse the Aqua Stop safety device in water contains an electric valve To prevent leaks or water damage observe the instructions in this section Caution only operate the washing machine using cold drinking water Do not connect to the mixer tap of an unpressurised hot water boiler Do not use a used inlet hose Only use the inlet hose supplied or one which was purchased from an authorised specialist dealer Ifin doubt have a technician connect the appliance Water inlet Water inlet hose Caution do not bend squash modify or cut through otherwise its strength is no longer guaranteed Optimum water pressure in the supply network 100 1 000 kPa 1 10 bar When the tap is on the water flow is at least 8 I min f the water pressure is higher than this a pressure reducing valve must be installed Standard Model Aqua Stop Aqua Secure 1 Connect the water inlet hose to the tap Caution only tighten the screw connections by hand 2 Open the water tap carefully checking the leak tightness of the connection points Caution the screw co
8. derneath a continuous worktop that is securely connected to adjacent cabinets i Installation underneath the worktop Risk of electric shock Instead of the appliance covering plate you must have a metal cover fitted by an expert order no WMZ2420 WZ10190 Recess width of 60 cm required Moisture inside the drum is due to final testing Scope of deli ver 4 0 27012141011010 R0 01410103 otandard Aqua Stop Aqua Secure Mains cable ah Me Kt ee aoc ee Water outlet Water inlet Covers Elbow for fixing the drainage hose in place Wrench depending on model Also required depending on the connection 1 hose clamp 24 40 mm exclusive dealers to connect to a siphon page 4 water connection Useful tools Spirit level for installation Hose and cable lengths 0 27012141011010 R0 01110103 i min 60 cm max 100 cm Available from specialist dealers the after sales service Extension for Aqua Stop or cold water inlet hose approx 2 50 m order no WMZ2380 WZ10130 CZ11350 Z7070X0 Longer inlet hose approx 2 20 m for standard model Removing the transport braces Before using the appliance for the first time make sure that you completely remove transport braces and keep them for subsequent transportation Ifyou need to transport the appliance at a later date always re affix the transport bra
9. ecified on the rating plate Make sure that After transportation the transport braces must be removed page 3 the mains plug fits the socket the cable cross section is adequate the earthing system is properly installed If this is necessary the mains cable may only be replaced by a qualified electrician Replacement mains cables are available from the after sales service Technical specifications Do not use multiple plugs couplings or extension cables To prevent unused detergent from flowing straight into the drain during the next wash Pour 1 litre of water into compartment II and start the Empty programme 9401 9000440474 Dimensions width x depth x height 60 x 59 x 84 2 cm lf a residual current circuit breaker is used only use a type which displays this symbol Ex Weight 69 83 kg depending on model Only this symbol guarantees compliance with the currently applicable regulations Do not plug in or unplug the mains plug with wet hands Pull the appliance plug out of the socket at the plug only not by the cable Mains connection Nominal voltage 220 240 V 50 Hz Nominal current 10 A Nominal power 2000 2300 W Water pressure 100 1000 kPa 1 10 bar Manufacturer gt Operating instructions Test programmes According to currently valid IEC 60 456 6 After sales service Before you call the after sales service please make sure that you cannot remedy the fault yourself
10. nnection is under mains water pressure Water outlet E Water outlet hose Caution do not bend or pull lengthways Height difference between the installation surface and the drain min 60 cm max 100 cm Outlet in a sink Caution secure the drain hose from slipping out Caution the plug must not block drainage from the sink During pumping check whether the water is draining away quickly enough The end of the drain hose must not be immersed in the water pumped out This risks water being sucked back into the washing machine Drainage into a siphon Caution the connection point must be secured with a hose clamp 24 40 mm exclusive dealers Alignment JN 1 5 Aligning the washing machine with a spirit level Tighten the lock nut against the housing Transportation e g when moving home Intense noise formation vibrations and wandering may be the result of incorrect alignment Before transporting the washing machine Turn off the tap Release the water pressure in the inlet hose gt Operating instructions Maintenance filter in water inlet Drain residual water gt Operating instructions Maintenance drain pump Disconnect the washing machine from the power supply Dismantle the hoses Preparing and installing transport braces Loosen the lock nut using a wrench by turning it in a clockwise direction 2 3 4 5 Change the height by turning
11. nsportation e g when moving home alignment Before transporting the washing machine Turn off the tap Release the water pressure in the inlet hose Operating instructions Maintenance filter in water inlet Drain residual water gt Operating instructions Maintenance drain pump Disconnect the washing machine from the power supply Dismantle the hoses Preparing and installing transport braces 1 Loosen the lock nut using a wrench by turning it in a clockwise direction gt Aligning the washing machine with a spirit level 2 3 4 5 2 Change the height by turning the appliance feet Caution all four appliance feet must be firmly on the ground The washing machine must not wobble Check the alignment of the washing machine with a spirit level and adjust if necessary 1 Remove the covers 3 Tighten the lock nut against the housing In doing so hold the foot tight and do not adjust its height Caution the lock nuts on all four appliance feet must be screwed tightly against the housing 2 Insert all 4 transportation protection devices and clamp the mains cable to the holders Tighten the bolts Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket The power supply and voltage indicated on the washing machine rating plate must be the same The connected load and fuse required are sp
12. ot cover defective power cables or fittings between the Aqua Stop Installation surface 2222 1 connection and the tap E Installing the appliance 000 1 4 Appliances with Aqua Stop do not need to be supervised during operation nor secured M Scope of delivery iit s neva beeen vanes 2 afterwards by turning off the tap Hose and cable lengths 2 The tap only needs to be turned off if you are away from home for a long period e g for E Removing the transport braces 3 several weeks holiday E Water connection 00000 4 E Alignment 62 oadvcewededaeowae ee ound 5 M Electrical connection 00 5 M Transportation e g when moving home 6 Technical specifications 6 E After sales service 008 7 Agqua Stop warranty a s saaa caaeaae aa T Read these instructions before switching on the washing machine Also observe the separate Instruction manual Keep all documents for use in the future or for the subsequent owner
13. ou completely remove transport braces and keep them for subsequent transportation Ifyou need to transport the appliance at a later date always re affix the transport braces to prevent damage to the machine page 6 Store the screw and sleeve screwed together 1 Connect the water inlet hose to the tap Caution only tighten the screw connections by hand 2 Open the water tap carefully checking the leak tightness of the connection points Caution the screw connection is under mains water pressure until they move freely in the sleeves Always displace bolt and sleeve together as shown in the illustration Water outlet All bolts and sleeves must be removed E Mme ontet hose Caution do not bend or pull lengthways Height difference between the installation surface and the drain min 60 cm max 100 cm Outlet in a sink Caution secure the drain hose from slipping out Caution the plug must not block drainage from the sink During pumping check whether the water is draining away quickly enough The end of the drain hose must not be immersed in the water pumped out This risks water being sucked back into the washing machine Drainage into a siphon Caution the connection point must be secured with a hose clamp 24 40 mm exclusive dealers Alignment h Intense noise formation vibrations and wandering may be the result of incorrect Tra
14. the appliance feet Caution all four appliance feet must be firmly on the ground The washing machine must not wobble Check the alignment of the washing machine with a spirit level and adjust if necessary 1 Remove the covers In doing so hold the foot tight and do not adjust its height Caution the lock nuts on all four appliance feet must be screwed tightly against the housing 2 Insert all 4 transportation protection devices and clamp the mains cable to the holders Tighten the bolts Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket The power supply and voltage indicated on the washing machine rating plate must be the same The connected load and fuse required are specified on the rating plate Make sure that After transportation the transport braces must be removed page 3 the mains plug fits the socket the cable cross section is adequate the earthing system is properly installed If this is necessary the mains cable may only be replaced by a qualified electrician Replacement mains cables are available from the after sales service Technical specifications Do not use multiple plugs couplings or extension cables To prevent unused detergent from flowing straight into the drain during the next wash Pour 1 litre of water into compartment Il and start the Empty programme 9401 90004
15. the associated additional costs Aq TE Deji 07 0 Warran ty only for appliances with Aqua Stop In addition to warranty claims against the vendor from the purchase agreement and to our appliance warranty we will pay damages under the following conditions 1 Ifa fault in our Aqua Stop system causes water damage we will reimburse damages caused to private customers 2 The liability guarantee is valid for the service life of the appliance 3 It is a prerequisite of all warranty claims that the appliance with Aqua Stop must have been set up and connected correctly in accordance with our instructions this also includes a correctly fitted Aqua Stop extension original accessories Our warranty goes not cover defective power cables or fittings between the Aqua Stop connection and the tap 4 Appliances with Aqua Stop do not need to be supervised during operation nor secured afterwards by turning off the tap The tap only needs to be turned off if you are away from home for a long period e g for several weeks holiday Washing machine Installation Instructions con ter 1 t S Page M Safety iNStructionS usss aaa aaaea 1 Installation surface nanana aaa aaa aaa 1 Installing the appliance 1
Download Pdf Manuals
Related Search