Philips 19HFL2829P 19" Black
Contents
1. Scroll through the available sources by pushing the button up or down To switch the TV to standby Press the middle of the button down and hold it down for a few seconds the TV will turn into standby mode Switching on off To switch the TV on To switch on the TV from standby mode either Press the Standby button Programme or a numeric button on the remote control Press the side function switch until the TV comes on from standby Note If the TV has been left on and not been operated for a while the TV will go into standby When you next switch on the following message will be displayed Standby Cause No Operation Press OK to continue To switch the TV off Press the Standby button on the remote control or press the side function switch until the TV switches into standby mode Note To power down the TV completely unplug the power cord from the mains socket First time installation You will see the language selection screen when you first turn on your TV Select your preferred language and press OK Note If a USB device is connected to the TV you can press the GREEN button on the remote before continuing in order to load the NVRAM data service list preferences etc from the USB device which is uploaded from another Philips Hotel TV Refer to the Copy To USB and Copy From USB sections under the Hotel Mode title on the pages at the end of this manual If the correct software update fil2. a Start playback with the OK e Start playback with the Play All files in the list will be button and activate played once in random order All files in the list will be continuously played in the same random order Start playback with the Play button and activate Ey This function allows to control the CEC enabled devices that are connected through HDMI ports by using the remote control of the TV The CEC option in the Settings gt Other Settings menu should be set as Enabled at first Press the Source button and select the HDMI input of the connected CEC device from the Sources list menu When new CEC source device is connected it will be listed in source menu with its own name instead of the connected HDMI ports name such as DVD Player Recorder 1 etc The TV remote is automatically able to perform the main functions after the connected HDMI source has been selected To terminate this operation and control the TV via the remote again press and hold the O Zero button on the remote control for 3 seconds This feature can also be enabled or disabled under the Settings gt Other Settings menu The TV supports also ARC Audio Return Channel feature This feature is an audio link meant to replace other cables between the TV and the audio system A V receiver or speaker system When is active TV does not mute its other audio outputs automatically So you need to decrease TV volume
3. 5 6 D 8 PHILIPS Teletext Press Text button to enter Press again to activate mix mode Press once more to exit Follow the instructions displayed on digital teletext screen Digital teletext Press Text button to view digital teletext information Operate it with the colored buttons cursor buttons and OK button The operation method may differ depending on the contents of the digital teletext Follow the instructions displayed on digital teletext screen 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Standby Switches On Off the TV Text Displays teletext where available press again to superimpose the teletext over a normal broadcast picture mix Stop Stops the media being played Screen Changes the aspect ratio of the screen Source Shows all available broadcast and content sources Menu Displays TV menu Swap Quickly cycles between previous and current channels or sources If the Hotel Mode is set to On a press of this button switches between the Network Channel Types DVB T amp Analogue and DVB Cable amp Analogue Navigation buttons Helps navigate menus content etc and displays the subpages in TXT mode when pressed Right or Left Programme Page Volume Green button Follow the on screen instructions for coloured button functions Red button Follow the on screen instructions for coloured button functions Numeric bu
4. ASF WMA Pro lt 768kbps Bit rate 96KHz Sampling rate AAC HEAAC Free Format Bit rate 8KHz 48KHz Sampling rate 8Kbps 320Kbps Bit rate 16KHz 48KHz Sampling rate works 32Kbps 640Kbps Bit rate 32KHz 44 1KHz 48KHz Sampling rate Ru h 32Kbps 6 Mbps Bit rate 32KHz 44 1KHz 48KHz Sampling rate files LPCM 64Kbps 1 5Mbps Bit rate 8KHz 48Khz Sampling rate IMA ADPCM 384Kbps Bit rate 8KHz 48Khz Sampling rate MS ADPCM 64 128Kbps Bit rate 8KHz Sampling rate Resolution WxH 15360x8640 4147200 bytes Resolution WxH 1024x768 6291456 bytes Resolution WxH 9600x6400 3840000 bytes Lus emm sub Subt Sub2 Sub3 Co English 10 HOTEL MODE The hotel mode is a special mode which restricts some operations of TV This allows the customer to use the TV in special places such as hotels prisons or hospitals These restrictions are basically given below The user cannot increase the volume above a specified limit And can set fixed volume value The user can enable headphone direct volume control The user cannot reach some menus The user cannot use the buttons on the TV The user can limit the start up source position Last status can cannot be used Teletext can be disabled or enabled NVRAM data like service list and user preferences etc can be copied to or from a USB device Pin8 can cannot be used To enter
5. hotel menu press Menu 3 1 9 7 5 3 Mute buttons consecutively HOTEL MENU ITEMS Hotel Mode Set as On to activate hotel mode In hotel mode channel list and install menu are blocked Pin 8 Set as On to enable picture mode changes accroding to Pin8 data Last Status Set as On to enable the TV to reopen with the closing status Panel Lock Set as All to prohibit the use of the buttons on the TV Partial option does not prohibit the scroll button functions If the TV has multiple control buttons only the Source button will be functional if the option is set as Partial RCU Inhibit Set as On to inhibit the use of the remote To turn this option off repeat the steps to open hotel menu Remote control will function in Stand By mode independently from the setting of this option If this option is set as Limited only the Volume Up Down Programme Up Down Numeric Buttons and the Standby button on the remote will be functional Startup Position You can specify the opening settings of the TV Choose the channel and or source to be opened when the TV is switched on next time The available options are as the following Auto The TV will open with the last channel if TV was the last source or last source TV The TV will open with the channel that is specified in Startup Channel menu item Other The TV will open with the specified source EXT1 SIDE AV HDMI1 etc Startup Channel You can specify a channel to be displa
6. to zero manually if you want to hear audio from connected audio device only same as other optical or co axial digital audio outputs If you want to change connected device s volume level you should select that device from the source list In that case volume control keys are directed to connected audio device System Audio Control Allows an Audio Amplifier Receiver to be used with the TV The volume can be controlled using the remote control of the TV To activate this feature set the Speakers option in the Settings gt Other Settings menu as Amplifier The TV speakers will be muted and the sound of the watched source will be provided from the connected sound system Note The audio device should support System Audio Control feature and CEC option should be set as Enabled Change TV settings To access the options listed below 1 Press the Menu button 2 Highlight your selection 3 Press OK to confirm Display options Mode Changes the picture mode to one of the following Cinema Game Sports Dynamic and Natural Contrast Sets the light and dark values of the image Brightness Sets the brightness value of the image Sharpness Sets the sharpness value A high sharpness value may result in a clearer crisper image depending on the content Color Sets the color value Backlight Controls the brightness of the backlight English 5 Noise reduction Reduces the noise level in the image Sound options Volum
7. 19HFL2829P 12 24HFL2829T 12 28HFL2829T 12 32HFL2829T 12 40HFL2829T 12 48HFL2829T 12 EN User manual PHILIPS Notifications features and accessories 4 Energy efficiency 4 TV scroll Ae 4 Switching on off tS t 4 First time installation una aan 4 Play media files from a USB drive 5 Media browser 5 5 Change settings isos 5 Display OPCS sicario 5 Sound Options Sra 6 Configuring parental settings 6 Electronic program quide EP O Lain 6 Update your La 6 Troubleshooting amp Tips isa 6 AV and HDMI signal compatibility 9 Supported file formats for USB mode 10 English 1 Read and understand all information in the accompanying Safety booklet before you install and use your TV If damage is caused by failure to follow these instructions the warranty does not apply Disposal of old Equipment and Batteries Please do not disposed this TV or battery as general household waste If you want to dispose this product or battery please consider the collection systems or facilities for appropriate recycling Notice The sign Pb below the symbol for batteries indicates that this battery contains lead Battery Products English 2 Use Your TV Remote Control 1 2 3 4
8. 2 5W Power Consumption W 45W 50W 50W 65W 75W 75W Weight kg 2 8 kg 3 45 kg 5 1 kg 5 65 kg 8 85 kg 12 45 kg TV Dimensions DxLxH with foot mm 134x451x331 mm 134x554x370 mm 185x640x427 mm 185x735x478 mm 220x923x588 mm 220x1093x681 mm TV Dimensions DxLxH without foot mm 35 min 61 max 554 x339 mm 38 min 65 max 35x451x296 mm x640x387 mm 77 min 97 max x735x438 mm 79 min 98 max x923x544 mm 81 min 99 max x1093x642 mm Operation temperature and operation humidity 5 up to 45 85 humidity max English 8 PC input typical display modes The following table is an illustration of some of the typical video display modes Resolution 640x350 640x400 640x400 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1152x864 1152x864 1152x870 1280x768 1360x768 1280x768 1280x768 1280x960 1280x960 Frequency 85Hz 70 2 85Hz 60Hz 66Hz 72Hz 75Hz 85Hz 56Hz 60Hz 70 2 72 2 75Hz 85Hz 75Hz 60Hz 66Hz 70Hz 72Hz 75Hz 85Hz 60Hz 70 2 75Hz 85Hz 75Hz 60Hz 60Hz 75Hz 85Hz 60Hz 75Hz N N E an 1280x960 85Hz 1280x102
9. 4 1280x1024 1280x1024 1400x1050 60Hz 1400x1050 1400x1050 85Hz ETE 1440x900 1440x900 1600x1200 1680x1050 BET 1920x1080 MOM 1920x1200 EXT 5 Side AV PC YPbPr English 9 AV and HDMI signal compatibility PAL 50 60 O NTSC 60 50 60 877 SECAM PAL 50 60 5 60 SECAM Supported file formats for USB mode Video dat mpg Mpeg1 2 1080P 30fps 50Mbit sec mpeg ts trp 2 H 264 H 264 1080Px2 25fps 1080P 50fps MVC 1080P 24fps Other 1080P 30fps tp m2ts VC1 AVS MVC 50Mbit sec MPEG2 1080P 30fps 50Mbit sec MPEG1 2 4 H 264 1080Px2 25ips 1080P 50fps 1080P 30fps 50Mbit sec H 264 MPEG4 XviD H 264 1080Px2 25fps 1080P 50fps 1080P 30fps SOMbit sec 264 264 fla flv H 264 Sorenson H 264 1080Px2 25fps 1080P 5Ofps 1080P 30fps 40Mbit sec H 263 3 Ww MPEG2 4 Xvid H 264 1080Px2 25fps 1080 50fps 1080P 30fps 50Mbit sec ob mkv VI MPEG4 H 264 1920x1080 30P 20Mbit sec mp3 av pcm MPEG1 2 Layer Layer1 32Kbps 448Kbps Bit rate 16KHz 48KHz Sampling rate 1 2 3 MP3 Layer2 8Kbps 384Kbps Bit rate 16KHz 48KHz Sampling rate Layer3 8Kbps 320Kbps Bit rate 16KHz 48KHz Sampling rate LPCM Audio WMA WMA WMA WMA 128bps 320Kbps Bit rate 8KHz 48Khz Sampling rate
10. confirm LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel number sequence if available After all the available stations are stored the Edit Channel List will be displayed on the screen Press Menu button to quit Edit Channel List and watch TV Note Do not turn off the TV while initializing first time installation Note that some options may not be available depending on the country selection Play media files from a USB drive You can play photo music and movie files stored on a USB disk by connecting it to your TV Connect a USB disk to one of the USB inputs located on the side of the TV Pressing the Menu button while in the Media Browser mode will access the Picture Sound and Settings menu options Pressing the Menu button again will exit from this screen You can set your Media Browser preferences by using the Settings menu IMPORTANT Back up your files before making any connections to the TV The manufacturer will not be responsible for any file damage or data loss Certain types of USB devices for example MP3 players or USB hard disk drives memory sticks may not be compatible with this TV Media browser menu Loop Shuffle Mode Operation All files in the list will be continuously played in original order Start playback with the Play button and activate The same file will be played continuously repeat button and activate
11. e Adjusts volume level Equalizer Changes the equalizer mode Balance Adjusts whether the sound is coming mainly from the right or left speakers Headphone Sets headphone volume Sound mode Sets the preferred sound mode AVL Sets a limit to maximum volume output Dynamic bass Enables or disables the Dynamic Bass Increases the range of bass Surround sound Surround sound mode can be changed as On or Off Digital Out Sets digital out audio type Configuring parental settings This feature is for restricting access to selected content It is controlled by a pin number defined by you Note Default PIN can be set to 0000 or 1234 If you have defined the PIN is requested depending on the country selection during the First Time Installation use the PIN that you have defined Menu lock optional Menu lock setting enables or disables the menu access Maturity lock optional If this option is set TV gets the maturity information from the broadcast and if this maturity level is disabled disables access to the broadcast Child lock optional When Child Lock is set the TV can only be controlled by the remote control In this case the control panel buttons will not work Set PIN Defines a new PIN number Electronic program guide EPG Some channels send information about their broadcast schedules Press the Epg button to view the EPG menu Red button Prev Day Displays the programs of previous day Gree
12. e is pre installed in the USB device you can press the RED button on the remote before continuing in order to upgrade your TV s software The software update file should be named as VES151HE _ upgrade bin Software upgrade via an USB device can be done anytime by using the hidden key combination Menu 1 5 0 5 On the next screen set your preferences using the navigation buttons and when finished press OK followed by the selection Home Mode Store Mode You can set up your TV by following the First Time Installation FTI screen with the following selections Aerial installation Select the Aerial option from the Search Type screen to search for terrestrial digital TV broadcasts Cable installation Select Cable option and press OK on the remote control For automatic installation in case your Cable network supplier supports a Network ID based installation e g Unitymedia select Yes in following screen and press OK English 4 In case your Cable network supplier does not support a Network ID based installation please select No press OK and follow the instruction on the screen You can also select frequency ranges from this screen Enter the frequency range manually by using the numeric buttons Note Searching duration will change depending on the selected search step While the search continues a message may appear asking whether you want to sort channels according to the LCN Select Yes and press OK to
13. itch off the display Other functions continue to operate normally While you watch TV press Menu button and select Picture and from there select the Power Save Mode option Press Right button while Eco is selected A message will be displayed on the screen Select PROCEED and press OK to turn the screen off immediately If you don t press any button the screen will be off in 15 seconds Press any button on the remote or on the TV to turn the screen on again Note Disconnect your TV from the mains plug in case your TV is going to be inactive for a long time TV scroll button The TV Scroll button on the side of the TV allows you to control the volume change channels and put the TV into standby P e wy MM 2 change volume Increase the volume by scrolling up Decrease the volume by scrolling down To change channel Press the middle of the scroll button the channel information banner will appear on screen Scroll through the stored channels by pushing the button up or down To change source Press the middle of the button twice the source list will appear on screen
14. n button Next day Displays the programs of the next day Yellow button Zoom Press the Yellow button to see events in a wider time interval Blue button Filter Views filtering options SUBTTL Press Subtitles button to view Select Genre menu Using this feature you can search the program guide database in accordance with the genre Info available in the program guide will be searched and results matching your criteria will be highlighted Info button Displays detailed information about selected programs Numeric Buttons Jump Jumps to the preferred channel directly via numeric buttons OK Displays program options Text button Search Displays Guide Search menu Swap button Now Displays current event of the highlighted channel Program Options In EPG menu press the OK button to open the Event Options menu Select Channel In EPG menu using this option you can switch to the selected channel Set Timer Delete Timer After you have selected a program in the EPG menu press the OK button Select the Set Timer on Event option and press the OK button You can set a timer for future programs To cancel an already set timer highlight that program and press the OK button Then select Delete Timer option The timer will be cancelled Update your TV Navigate on your main menu choose settings the version of the current software is displayed CAUTION Do not install a lower version of software than the current ver
15. nual tuning The picture quality may degrade when two devices are connected to the TV at the same time In such a case disconnect one of the devices No picture This means your TV is not receiving any transmission Make sure the correct source has been selected Is the antenna connected properly s the antenna cable damaged Are suitable plugs used to connect the antenna If you are in doubt consult your dealer No sound Check if the TV is muted Press the Mute button or increase the volume to check Sound may be coming from only one speaker Check the balance settings from sound menu Remote control no operation The batteries may be exhausted Replace the batteries Input sources can not be selected If you cannot select an input source it is possible that no device is connected If not Check the AV cables and connections if you have tried to connect a device English 7 Specifications TV Broadcasting PAL SECAM BG DK II LL Receiving Channels VHF BAND UHF BAND U HYPERBAND Digital Reception Fully integrated digital terrestrial cable TV DVB T C DVB T2 compliant Number of Preset Channels 1000 Channel Indicator On Screen Display RF Aerial Input 75 Ohm unbalanced Operating Voltage 220 240V AC 50Hz Audio German Nicam Stereo Display 19 24 Audio Output Power WRMS 10 THD 2x2 5W 2x
16. oning Wakeup Time Channel Set the channel whose time information is to be used for wakeup timer If this option is set as 0 time information of the channel which is being watched will be used Note If hotel mode is active Add wake up timer function will be available in Settings Timers menu After the new timer is saved the TV will wake up automatically on desired time Wakeup Time Volume Set the wakeup volume value of the TV This value can t be set as greater than the value in Volume Limit menu item USB Option Set as Off to disable the USB ports on the TV You can also set this option as 5V to provide 5 volts power over USB In this case it will still not be available to browse the USB content via Media Browser feature of the TV Fixed Pic Mode Set as On to disable picture setting menus Boot Up Picture Mode You can choose one of the picture modes that the TV will boot up with or set as Off This option is set as Off by default Picture mode can be changed later using the Mode option in the Picture Settings menu Press the Menu button Select Picture and press OK Highlight Mode and set using the Left Right buttons on the remote Digital Tuner Set as Off to disable digital channels When a digital channel is opened from the channel list no signal message will be displayed and digital channels will not be listed when manual or auto searches are performed Multiple RC Support up to 4 You can cho
17. ose one of the predefined remotes or set as Off You can set the RCU type from RCU program menu The shortcut of this menu is RETURN 1 2 3 4 Note For any MHEG supporting services you should press the INFO RETURN 1 2 3 4 buttons buttons consecutively The multiple RC support is works on RC5 type of remote controllers NIT Update If this option is enabled NIT Nertwork Information Table data will be updated automatically High Security If you set this option as ON the Hotel TV menu will be accessible only via the Philips Hospitality Setup remote 22AV8573 Note Only the RC setup Home Menu key combination can be used to open the Hotel Mode menu Other keys are not recognized by the TV EPG Enable Disable If you enable this option the EPG menu will be accessable while the TV is in Hotel mode CEC Enabled You can set the TV to detect connected CEC devices and switch to related source automatically by setting this option as ON Auto Switch Other options are ON Manual Switch and Off Reset to Default Values Highlight this option and press the OK button on the remote to return the TV to default settings English 12 4 a SY Specifications are subject to change without notice Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N V and are used under license from Koninklijke Philips N V CX 2015 O TP Vision Europe B V All rights reserved Qe www philips com
18. sion installed on your product TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade Update with USB Before you update the software make sure that you have A USB storage device that has at least 256 megabytes of storage space is FAT32 or DOS formatted and has its write protection disabled Access to a computer with a USB connector and Internet access Navigate to www philips com support and follow the software update instructions Automatic update from digital broadcast While the TV is connected to an aerial signal If Automatic scanning in the Upgrade Options menu is Enabled the TV wakes up at 03 00 and searches broadcast channels for new software upgrades If new software is found and downloaded successfully the next time the TV powers up it will have the new software version Note Do not unplug the power cord while led is blinking during the reboot process If the TV fails to come on after the upgrade unplug the TV for 2 minutes and plug in again Troubleshooting amp Tips Tv will not turn on Make sure the power cord is plugged in securely to wall outlet Check if batteries are exhausted Press the Power button on the TV Poor picture Check if you have selected the correct TV system English 6 Low signal level can cause picture distortion Please check antenna access Check if you have entered the correct channel frequency if you have done ma
19. ttons Switches the channel enters a number or a letter in the text box on the screen Subtitles Turns subtitles on and off where available Language Switches between sound modes analogue TV displays and changes audio subtitle language digital TV where available Blue button Follow the on screen instructions for coloured button functions Yellow button Follow the on screen instructions for coloured button functions Volume Mute Completely turns off the volume of the TV Programme Page Return Back Returns to previous screen opens index page in TXT mode OK Confirms user selections holds the page in TXT mode views channel list Info Displays information about on screen content shows hidden information reveal in TXT mode Play Starts to play selected media Pause Pauses the media being played Sleep Sets your TV to shut down automatically EPG Electronic programme guide Displays the electronic programme guide Note The Remote Control range is approximately 7m 23ft English 3 Notifications features and accessories Energy efficiency This TV is designed with energy efficieny features Power save mode Eco You can apply a combination of energy saving picture settings While you watch TV press the Menu button and the Power Save Mode settings can be found in the Picture section of the Main Menu Picture off mode If you only want to listen to audio from the TV you can sw
20. yed when the TV is turned on next time if Startup Position is set as TV Volume Limit Set the maximum value of the volume Fixed Volume Enable Set as On to enable the use of fixed volume value which is set in Fixed Volume Value menu item Fixed Volume Value Set the value of the volume to be fixed OSD Disable The default value is set as Disable Setup Menus for hotel mode You can block all menus by setting this item as Disable All Menus Invisable Setup Menus are Main menu Install and Retune Channel list Settings menu Parental Sources Satellite Settings Network Settings Other settings English 11 Teletext You can enable or prohibit the teletext services or MHEG if available by setting this item as On or Off Copy To USB USB cloning You can copy the NVRAM data service list preferences etc and the welcome image as hotel wel png to a USB device using this option Press OK to copy those files from TV to USB Copy From USB USB cloning You can copy the NVRAM data service list preferences etc and the welcome image from a USB device using this option The welcome image should be named as hotel wel png and copied into a directory named welcome image Press OK to copy those files from USB to TV Note USB device which will be used for USB cloning functions must be FAT32 formatted You can use the hidden key combination Menu 0 6 2 5 9 6 Info for quick USB Cl
Download Pdf Manuals
Related Search