Home

Samsung S34E790C

1. Hold the plug when disconnecting the power cord from the power socket e An electric shock or fire may result DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES Afire may result Do not install the product in poorly ventilated spaces such as a bookcase or closet e An increased internal temperature may cause a fire Install the product at least 10cm away from the wall to allow ventilation An increased internal temperature may cause a fire Keep the plastic packaging out of the reach of children Children may suffocate IN TAS Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc The product may fall and become damaged and or cause an injury Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e Afire or electric shock may result Do not expose the product to direct sunlight heat or a hot object such as a stove The product lifespan may be reduced or a fire may result Do not install the product within the reach of young children The product m
2. sa LCD Monitor User Manual S34E790C The colour and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Table of contents Before Using the Product Copyright 5 Securing the Installation Space 6 Precautions for storage 6 Safety Precautions 6 Symbols 6 Cleaning 7 Electricity and Safety 7 Installation 8 Operation 10 Correct posture to use the product 13 Preparations Checking the Components 14 Components 14 Parts 15 Control Panel 15 Direct Key guide 16 Function Key Guide 17 Reverse Side 19 Installation 20 Adjusting the Product Tilt and Height 20 Anti theft Lock 22 Connecting and Using a Source Device Screen Setup Before Connecting 23 Pre connection Checkpoints 23 Connecting and Using a PC 23 Connection Using the HDMI Cable 23 Connection Using the DP Cable 24 Connecting to Headphones or Speakers 24 Connecting the Power 25 Tidying Up the Connected Cables 26 Connecting the Product to a PC as a USB HUB 27 Connecting a PC to the Product 27 Utilizing the Product as a USB HUB 28 Driver Installation 29 Setting Optimum Resolution 29 Brightness 30 Configuring Brightness 30 Contrast 31 Configuring Contrast 31 Sharpness 32 Configuring Sharpness 32 Game Mode 33 Configuring Game Mode 33 SAMSUNG MAGIC Bright 34 Configuring SAMSUNG MAGIC Bright 34 Co
3. Do not use a damaged power cord or plug or a loose power socket e An electric shock or fire may result Do not use multiple products with a single power socket Overheated power sockets may cause a fire Do not touch the power plug with wet hands Otherwise an electric shock may result Insert the power plug all the way in so it is not loose An unsecure connection may cause a fire Connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result NI Do not bend or pull the power cord with force Be careful not to leave the power cord under a heavy object Damage to the cord may result in a fire or electric shock Do not place the power cord or product near heat sources A fire or electric shock may result Clean any dust around the pins of the power plug or the power socket with a dry cloth Afire may result Do not disconnect the power cord while the product is being used The product may become damaged by an electric shock Only use the power cord provided with your product by Samsung Do not use the power cord with other products e A fire or electric shock may result Keep the power socket where the power cord is connected unobstructed The power cord must be disconnected to cut off power to the product when an issue occurs
4. the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation Easy Setting Box The Easy Setting Box installation may be affected by the Graphics Card Motherboard and the Networking Environment System Requirements OS Windows Vista 32Bit 64Bit Windows 7 32Bit 64Bit Windows 8 32Bit 64Bit Windows 8 1 32Bit 64Bit Hardware e Atleast 32MB of memory e Atleast 60MB of free space on the hard disk drive Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select Easy Setting Box from the programme list and click the Add Delete button Chapter 10 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre test your product as follows If the problem persists contact Samsung Customer Service Centre Testing the Product Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a self diagnosis test 1 Power off both the PC and product 2 Disconnect the cables from the product 3 Poweron the product 4 ifthe message Check Signal Cable appears the product is working normally If the screen remains blank check the PC system video controller and cable Checking the Resolution and Fr
5. MACAU 0800 333 http www samsung com support S E A AUSTRALIA 1300 362 603 http www samsung com au support INDONESIA 021 56997777 http www samsung com id support 08001128888 JAPAN 0120 363 905 http www samsung com jp support MALAYSIA 1800 88 9999 http www samsung com my support 603 77137477 Overseas contact MYANMAR 01 2399888 http www samsung com support NEW ZEALAND 0800 726 786 http www samsung com nz support PHILIPPINES 1 800 10 7267864 PLDT http www samsung com ph support 1 800 8 7267864 Globe landline and Mobile 02 4222111 Other landline SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com sg support TAIWAN 0800 329999 http www samsung com tw support S E A THAILAND 0 2689 3232 http www samsung com th support 1800 29 3232 VIETNAM 1800 588 889 http www samsung com vn support S W A BANGLADESH 09612300300 http www samsung com in support INDIA 1800 3000 8282 Toll Free http www samsung com in support 1800 266 8282 Toll Free SRILANKA 0094117540540 http www samsung com support 0094115900000 MENA ALGERIA 021 3611 00 http www samsung com n_africa support BAHRAIN 8000 GSAM 8000 4726 http www samsung com ae support English http www samsung com ae_ar support Arabic EGYPT 08000 726786 http www samsung com eg support 16580 IRAN 021 8255 http www samsung com iran support JORDAN 0800 22273 http www samsung com Levant support
6. Grey scale___ Scale refers to levels of colour intensity that show variations of colour change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate____Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning rate and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Dot Pitch___ The product and screen consist of red green and blue dots A shorter distance between the dots produces a higher resolution Dot pitch refers to the distance between the shortest distance between dots of the same colour Dot pitch is measured in millimeters Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal ines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal ines per second are t
7. HDMI Black Level may not be compatible with some source devices The HDMI Black Level feature is only activated at a certain AV resolution such as 720P and 1080P Response Time Accelerate the panel response rate to make video appear more vivid and natural It is best to set Response Time to Standard or Faster when you are not Viewing a movie This menu is not available when PIP PBP Mode is set to On and the Size is set to Ll Lil Lamm PIP Mode Accelerate the panel response rate to make video Faster appear more vivid and natural Response Time Standard Fastest The displayed image may differ depending on the model Configuring the Response Time 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Move to Picture controlling the JOG button UP DOWN and press the JOG button 3 Move to Response Time controlling the JOG button UP DOWN and press the JOG button Standard Faster Fastest 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Chapter 05 Screen Adjustment Changing the Image Size 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Change the picture size 7 This menu is not available when PIP PBP Mode is set to On and the Size is set 2 Moveto Screen controlling the JOG button UP
8. a UV A W N When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Move to Screen controlling the JOG button UP DOWN and press the JOG button Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button Move the JOG button UP DOWN to select Contrast and then press the JOG button Adjust the Contrast controlling the JOG button LEFT RIGHT The selected option will be applied available in PBP mode Size EH Adjust the contrast PIP PBP Mode level for each R screen Size Sound Source Source Image Size Contrast E PBP t lt eee gt 75 The displayed image may differ depending on the model Adjust the contrast level for each screen 1 a v A W N When the Function Key Guide appears select ID by moving the JOG button UP Next press the JOG button Move to Screen controlling the JOG button UP DOWN and press the JOG button Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button Move the JOG button UP DOWN to select Contrast and then press the JOG button Adjust the Contrast controlling the JOG button LEFT RIGHT The selected option will be applied Chapter 06 Coordinating OSD A detailed description of each function is provided Refer to your product for details Set the menu language A change to the language setting will only be applied to the onscreen menu display It will n
9. EIRE 0818 717100 http www samsung com ie support ESTONIA 800 7267 http www samsung com ee support FINLAND 030 6227 515 http www samsung com fi support FRANCE 01 48 63 00 00 http www samsung com fr support GERMANY 0180 6 SAMSUNG bzw http www samsung com de support 0180 6 7267864 0 20 Anruf aus dem dt Festnetz aus dem Mobilfunk max 0 60 Anruf GREECE 80111 SAMSUNG 80111 726 7864 only from land line http www samsung com gr support 30 210 6897691 from mobile and land line HUNGARY 0680SAMSUNG 0680 726 786 http www samsung com hu support 0680PREMIUM 0680 773 648 ITALIA 800 SAMSUNG 800 7267864 http www samsung com it support LATVIA 8000 7267 http www samsung com lv support LITHUANIA 8 800 77777 http www samsung com lIt support EUROPE LUXEMBURG 261 03 710 http www samsung com support MONTENEGRO 020 405 888 http www samsung com support NETHERLANDS 0900 SAMSUNG 0900 7267864 0 10 Min http www samsung com nl support NORWAY 815 56480 http www samsung com no support POLAND 0 801 172 678 http www samsung com pl support lub 48 22 607 93 33 koszt potaczenia wedtug taryfy operatora PORTUGAL 808 20 7267 http www samsung com pt support ROMANIA 08008 726 78 64 08008 SAMSUNG Apel GRATUIT http www samsung com ro support SERBIA 011 321 6899 http www samsung com rs support SLOVAKIA 0800 SAMSUNG 0800 726 786 http www sams
10. 06 5777444 English KUWAIT 183 CALL 183 2255 http www samsung com ae support English http www samsung com ae_ar support Arabic MENA MOROCCO 080 100 22 55 http www samsung com n_africa support OMAN 800 SAMSUNG 800 726 7864 http www samsung com ae support English http www samsung com ae_ar support Arabic PAKISTAN 0800 Samsung 72678 http www samsung com pk support QATAR 800 CALL 800 2255 http www samsung com ae support English http www samsung com ae_ar support Arabic SAUDI ARABIA 920021230 http www samsung com sa support http www samsung com sa_en support English SYRIA 18252273 http www samsung com Levant support English TUNISIA 80 1000 12 http www samsung com n_africa support TURKEY 44477 11 http www samsung com tr support U A E 800 SAMSUNG 800 726 7864 http www samsung com ae support English http www samsung com ae_ar support Arabic AFRICA BOTSWANA 8007260000 http www samsung com support BURUNDI 200 http www samsung com support CAMEROON 7095 0077 http www samsung com africa_fr support COTE D IVOIRE 8000 0077 http www samsung com africa_fr support AFRICA DRC 499999 http www samsung com support GHANA 0800 10077 http www samsung com africa_en support 0302 200077 KENYA 0800 545 545 http www samsung com support MOZAMBIQUE 84726
11. DOWN and press the JOG button to Pee Mode 3 gt Move to Image Size controlling the JOG button UP DOWN and press the JOG button In PC mode In PC mode Choose the size and aspect ratio of the Auto Display the picture according to the aspect ratio of the input source picture displayed F a EN Wide Display the picture in full screen regardless of the aspect ratio of the input source PIP PBP The displayed image may differ depending on the model 39 In AV mode In AV mode 4 3 Display the picture with an aspect ratio of 4 3 Suitable for videos and standard broadcasts Choose the size and 16 9 Display the picture with an aspect ratio of 16 9 si 43 aspect ratio of the mage Size picture displayed 21 9 Display the picture with an aspect ratio of 21 9 iti 16 9 son Ss Screen Fit Display the picture with the original aspect ratio without cutting off V Position 21 9 The function may not be supported depending on the ports provided with the product PIP PBP Screen Fit Changing the screen size is available when the following conditions are satisfied A digital output device is connected using the HDMI DP cable he input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of nese signals This can only be set when the external input is connected through HDMI DP and PC AV Mode is set to AV The display
12. Dynamic Contrast mode s menu is not available when Game Mode is enabled m s menu is not available when PIP PBP Mode is set to On and the Size is set to EM PBP Mode Brightness Contrast 75 Sharpness 60 Game Mode off MAG NGBright Custom Color gt HDMI Black Level The displayed image may differ depending on the model Adjust the contrast level Values closer to 100 mean a bigger light dark contrast Configuring Contrast 1 UV A W N When the Function Key Guide appears select OI by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Contrast controlling the JOG button UP DOWN and press the JOG button Adjust the Contrast controlling the JOG button LEFT RIGHT The selected option will be applied Sharpness Configuring Sharpness 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Make the outline of objects more clear or blurry Range 0 100 A higher value will make the outline of objects clearer Move to Picture controlling the JOG button UP DOWN and press the JOG button m SAMSUNG This option is not available when mAe eBright is in Cinema or Dynamic Contrast mode Move to Sharpness controlling the JOG button UP DOWN and press the JOG button This menu is not available when Game Mode is enabled Not available
13. Text is blurry If using a Windows OS e g Windows 7 Windows 8 or Windows 8 1 Go to Control Panel Fonts Adjust ClearType text and change Turn on ClearType Video playback is choppy Playback of high definition large video files can be choppy This may be because the video player is not optimized for the computer resource Try playing the file on another video player Issues Solutions There is no sound Check the connection of the audio cable or adjust the volume Check the volume The volume is too low Adjust the volume If the volume is still low after turning it up to the maximum level adjust the volume on your PC sound card or software programme Video is available but there is no sound Sound cannot be heard if a HDMI DVI cable is used to connect the input device Connect the device using an HDMI cable or a DP cable Issues Solutions A beeping sound is heard when my PC is booting If a beeping sound is heard when your PC is booting have your PC serviced Issues Solutions The ports s344 1and s44 2 are not working The USB data transfer feature is not available when the USB Super Charging feature is set to On To use the USB data transfer feature go to Settings USB Super Charging select a specific USB port USB1 or USB2 and then select Off Refer to the user manual for your PC or graphics card for further instructions on adjustment Q amp A Question H
14. change without notice to improve quality HDMIIN 4 HDMIIN 2 Connects to a source device using an HDMI cable or HDMI DVI cable Sic DPIN Connects to a PC using a DP cable SAMSUNG a i sse PC IN Connects to a PC using a USB cable l 4 This port can only connect to a PC I Kibor Connect to an audio output device such as headphones The sound could only be heard when using the HDMI to HDMI cable or DP cable Connect to a USB device Compatible with a USB cable version 3 0 or lower Source devices can be charged using these USB ports Sar To use the USB Super Charging feature go to Settings USB Super Charging and set the USB port that will be used for fast charging to On z The USB data transfer feature is not available when the USB Super Charging feature is set to On S3 High speed charging is possible using the Ss 1and 9442 ports only These ports HDMI IN 1 HDMI IN 2 SE PCIN AUDIO OUT charge devices faster than typical USB ports The speed depends on the connected sat devices Installation Adjusting the Product Tilt and Height 7 The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality 2 22 0 20 42 0 The monitor tilt and height can be adjusted To avoid damage to the product when adjus
15. controlling the JOG button LEFT RIGHT 6 The selected option will be applied The off timer can be set within a range of 1 to 23 hours The product will automatically power off after the specified number of hours 7 For products for the market in some regions the Off Timer is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go to MENU Settings and set Off Timer to Off Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product Set the status of the power LED Off Timer Working Power LED On Stand by Reset All The displayed image may differ depending on the model Configuring Power LED On 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto Settings controlling the JOG button UP DOWN and press the JOG button 3 Move to Power LED On controlling the JOG button UP DOWN and press the JOG button Working The power LED is on when the product is turned on Stand by The power LED is on when the product is turned off 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Reset All Initializing Settings Reset All 1 When the Function Key Guide appears select ED by moving the JOG button U
16. customer requests software installation and setup for the product Fa service technician removes cleans dusts or foreign materials inside of the product f customer requests an installation additionally after purchasing a product through home shopping or online A Product damage caused by customer s fault Product damage caused by customer s mishandling or wrong repair If a product damage is caused by e External impact or drop e Use of supplies or separatly sold product unspecified by Samsung epair from a person besides an engineer of outsourcing service company or partner of Samsung ectronics Co Ltd mo J emodeling or repairing the product by customer Using it with incorrect voltage or non authorised electrical connections E ot following the cautions in User Manual Others e If product fails by natural disaster lightning fire earthquake flood damage etc e fconsumable components are all used up Battery Toner Fluorescent lights Head Vibrator Lamp Filter Ribbon etc f customer requests a service in case the product has no defect service fee may be charged So please read User Manual first LO UM Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories
17. e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Terminology OSD On Screen Display On screen display OSD allows you to customize on screen settings to optimize the picture quality as required You can change the screen brightness tint size and many other settings using menus displayed on the screen HUB HUB refers to a device that is a common connection point for multiple devices connected over a network It is used to connect multiple PCs video devices office devices and or LANs over a single network Gamma____The Gamma menu adjusts he grey scale that represents middle ones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens he medium brightness
18. http www samsung com latin_en support English PARAGUAY 009 800 542 0001 http www samsung com latin support Spanish http www samsung com latin_en support English PERU 0 800 777 08 http www samsung com pe support PUERTO RICO 1 800 682 3180 http www samsung com latin support Spanish http www samsung com latin_en support English TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com latin support Spanish http www samsung com latin_en support English URUGUAY 000 405 437 33 http www samsung com latin support Spanish http www samsung com latin_en support English VENEZUELA 0 800 SAMSUNG 726 7864 http www samsung com ve support EUROPE AUSTRIA 0800 SAMSUNG 0800 7267864 http www samsung com at support BELGIUM 02 201 24 18 http www samsung com be support Dutch http www samsung com be_fr support French BOSNIA 051 331 999 http www samsung com support EUROPE BULGARIA 800 111 31 be3nnaTHa TenepoHHa nnana http www samsung com bg support CROATIA 072 726 786 http www samsung com hr support CYPRUS 8009 4000 only from landline toll free http www samsung com gr support CZECH 800 SAMSUNG 800 726786 http www samsung com cz support Samsung Electronics Czech and Slovak s r o V Parku 2343 24 148 00 Praha 4 DENMARK 70 70 19 70 http www samsung com dk support
19. in a fire or electric shock If the product generates abnormal sounds a burning smell or smoke disconnect the power cord immediately and contact Samsung Customer Service Centre e An electric shock or fire may result Do not let children hang from the product or climb on top of it Children may become injured or seriously harmed If the product is dropped or the outer case is damaged turn off the power switch and disconnect the power cord Then contact Samsung Customer Service Centre Continued use can result in a fire or electric shock Do not leave heavy objects or items that children like toys sweets etc on top of the product e The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury During a lightning or thunderstorm power off the product and remove the power cable A fire or electric shock may result Do not drop objects on the product or apply impact e A fire or electric shock may result Do not move the product by pulling the power cord or any cable e Product failure an electric shock or fire may result from a damaged cable If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately Sparks can cause an explosion or fire Do nat lift or move the product by pulling the power cord or any cable Product failure an electric sho
20. may differ depending on the model Select the position of the sub screen from the available options 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button 2 ove to Screen controlling the JOG button UP DOWN and press the JOG button 3 ove to the PIP PBP controlling the JOG button UP DOWN and press the JOG button 4 ove to the Position controlling the JOG button UP DOWN and press the JOG button Not available when PBP is selected The screen may flicker if the input signal is unstable D Move to the desired option controlling the JOG button UP DOWN and press the JOG button 6 The selected option will be applied Configuring Sound Source PIP PBP Mode Size Position Sound Source Source Image Size Contrast PIP PBP Mode Size Sound Source Source Image Size Contrast The displayed image may differ depending on the model Set which screen you want to hear the sound for Set which screen you want to hear the sound for Set which screen you want to hear the sound for 1 When the Function Key Guide appears select NM by moving the JOG button UP Next press the JOG button 2 ove to Screen controlling the JOG button UP DOWN and press the JOG button 3 ove to the PIP PBP controlling the JOG button UP DOWN and press the JOG button 4 ove to the Sound Source controlling the JOG button UP DOWN an
21. setting menu appears Config uri ng Image Size Select the image size for sub screen 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button PIP Mode 5 available in PIP mode Size 1 mal mm 3 Move to Screen controlling the JOG button UP DOWN and press the JOG button Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button In PC mode 4 Movethe JOG button UP DOWN to select Image Size and then press the JOG button Select the image E a ee Be Ree eee available in PIP mode Size w C amp Size In PC mode Auto Display the picture according to the aspect ratio of the each screen input source Position Sound Source a Wide Display the picture in full screen regardless of the aspect ratio of the each screen input source Image Si ei In AV mode Contrast 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 In AV mode 21 9 Display the picture of the sub screen with an aspect ratio of 21 9 Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off Select the image The function may not be supported depending on the ports provided with the product PIP PBP Mode size for each screen o Changing the screen size is available when the
22. the color Green Blue Normal Color Tone Gamma Model The displayed image may differ depending on the model Configuring Color 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Move to Picture controlling the JOG button UP DOWN and press the JOG button 3 Move to Color controlling the JOG button UP DOWN and press the JOG button Red Adjust the red saturation level Values closer to 100 mean greater intensity for the colour Green Adjust the green saturation level Values closer to 100 mean greater intensity for the colour Blue Adjust the blue saturation level Values closer to 100 mean greater intensity for the colour Color Tone Se Cool 2 Set Cool 1 Set Normal Display the standard colour Warm 1 Set the colour temperature Warm 2 Set the colour temperature Custom Customize the colour tone When the ex ect a colour tone that bes the colour temperature to the colour temperature to ernal input is connected t suits your viewing needs be cooler than Cool 1 be cooler than Normal mode one o be warmer than Normal mode o be warmer than Warm 1 rough HDMI DP and PC AV Mode is set to AV Color Tone has four colour temperature settings Cool Normal Warm and Custom Gamma Adjust the middle level of luminance Mode Mode2 Mode3 4 Moveto the desired option by controlling the JOG bu
23. the OSD control press the LEFT button for 10 seconds when the main menu displayed 7 If the OSD control is locked Brightness and Contrast can be adjusted PIP PBP is available Information can be viewed Selects TIN by moving the JOG button in the function key guide screen m Press the button when configuring settings for the PIP PBP function is required 6 Selects bd to turn the Monitor off by moving the JOG button in the function key guide screen Actual models because of functional variation Function key guide options will be different Please run the corresponding function based on the actual icon and description When the monitor displays nothing i e Power saving mode or Non signal mode 2 direct keys for control source and power could be used as below JOG Button Power saving Non signal mode UP Source Change Down PRESS ENTER for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below JOG Button Action UP DOWN Move the option Exit the Main menu LEFT Close Sublist without saving value Value decreases in the slider Move to next depth ACHT Value increases in the slider Move to next depth PRESS ENTER Save the value and close Sublist Reverse Side Port Description The colour and shape of parts may differ from what is shown Specifications are Do 22v Connects to the DC power adapter subject to
24. the each screen input source Cf LC 3 In AV mode Image Size The displayed image may differ depending on the model In AV mode 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 21 9 Display the picture of the sub screen with an aspect ratio of 21 9 Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off The function may not be supported depending on the ports provided with the product Changing the screen size is available when the following conditions are satisfied Apply A digital output device is connected using the HDMI DP cable The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals Cancel This can only be set when the external input is connected through HDMI DP and PC AV Mode is set to AV D Move to the desired option controlling the JOG button and press the JOG button 6 The selected option will be applied Configuring Contrast available in PIP mode Size mal mm Adjust the contrast PIP PBP Mode level for each screen Size Position Sound Source Source Image Size Contrast The displayed image may differ depending on the model Adjust the contrast level for sub screen 1
25. 72 Installing the Software Easy Setting Box 73 Installing the Software 73 Removing the Software 73 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre 74 Testing the Product 74 Checking the Resolution and Frequency 74 Check the following 75 Q amp A 78 Table of contents Specifications General 80 PowerSaver 82 Standard Signal Mode Table 83 Appendix Contact SAMSUNG WORLD WIDE 85 Responsibility for the Pay Service Cost to Customers 95 Not a product defect 95 A Product damage caused by customer s fault 95 Others 95 Correct Disposal 96 Correct Disposal of This Product Waste Electrical amp Electronic Equipment 96 Terminology 97 Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited Microsoft Windows are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of the Video Electronics Standards Association Ownership of all other trademarks is attributed to their due owner e An administration fee may be charged if either a an engineer is called out at your request and there is no defect in the product ie where you have failed to read th
26. 7864 827267864 http www samsung com support NAMIBIA 08 197 267 864 http www samsung com support NIGERIA 0800 726 7864 http www samsung com africa_en support RWANDA 9999 http www samsung com support SENEGAL 800 00 0077 http www samsung com africa_fr support SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com suppor SUDAN 1969 http www samsung com suppor TANZANIA 0800 755 755 http www samsung com suppor UGANDA 0800 300 300 http www samsung com suppor ZAMBIA 0211 350370 http www samsung com suppor Responsibility for the Pay Service Cost to Customers When the service is requested in spite of in warranty we may charge you for a visit from a service technician in the following cases Not a product defect Cleaning of the product Adjustment Explanation Re installation and etc Fa service technician gives instructions on how to use product or simply adjusts options without disassembling product f a defect is caused by external environmental factors Internet Antenna Wired Signal etc f a product is reinstalled or devices are connected additionally after installing the purchased product for the first time Fa product is reinstalled to move to a different spot or to move to a different house f customer requests instructions on how to use because of another company s product f customer requests instructions on how to use the network or another company s programme f
27. CABLE hold and pull the COVER CABLE with your thumb and index finger in the arrow direction while holding the stand with the other hand Insert and fix the cables in the slot Hold the COVER CABLE and fix the cables into the grooves on the STAND REAR Hold the bottom of the stand neck securely with your left hand and use the thumb of your right hand to slide up the COVER CABLE to fix it in place Installation is finished O Connecting the Product to a PC as a USB HUB Connecting a PC to the Product 7 The product can function as a HUB by connecting to a PC via a USB cable You can connect a source device directly to the product and control the device from the product without having to connect the device to the PC To use the product as a USB hub connect the product to a PC using a USB cable eo o u J o i i u ik ss amp PC IN A Connect the USB cable to on the back of the product and USB ES on the PC AUSB 20 cable can be used to connect the product to a PC However to take full advantage of the USB 3 0 function connect a USB 3 0 cable between the PC and the product Ensure the PC supports USB 3 0 c Util izing the Product as a USB HUB Using the product as a hub connect and use various source devices with the product at the same time A PC cannot connect to multiple source
28. IS icon and then press the JOG button The main screen will switch in the order DisplayPort gt HDMI 1 HDMI 2 available in PBP mode Size HH PIP PBP Mode A for each screen Size Sound Source Source Image Size Select the source Contrast Source HDMI 1 DisplayPort The displayed image may differ depending on the model Select input sources for the devices displayed on the main and sub screens When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Move to Screen controlling the JOG button UP DOWN and press the JOG button Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button Move the JOG button UP DOWN to select Source and then press the JOG button DisplayPort HDMI 1 HDMI 2 Control the JOG button UP DOWN and choose the left right external input source Move the JOG button LEFT RIGHT to select Apply and then press the JOG button Pressing the JOG button after selecting Cancel will cancel Source configuration and revert back to the PIP PBP control menu The input source for the main screen changes The screen may flicker if the input signal is unstable When the input signal of the left and right screens are the same the operation cannot be performed When the Function Key Guide appears move the JOG button LEFT to select the IS icon and then press the JOG button The same PBP source
29. P Next press the JOG button Return all the settings for the product to the default factory settings Move to Settings controlling the JOG button UP DOWN and press the JOG button Return all the settings for the product to the Power LED On Stand by default factory Move to Reset All controlling the JOG button UP DOWN and press the JOG button OffTimer P Move to the desired option controlling the JOG button LEFT RIGHT and press the JOG button settings Reset All 9 UV A U N The selected option will be applied All the menu settings will be reset to default Are you sure you want to reset The displayed image may differ depending on the model Chapter 08 Information Menu and Others A detailed description of each function is provided Refer to your product for details Information Picture Model 534E790C View the current input source frequency and resolution Screen Options Displaying Information Settings HDMI 1 DisplayPort HERR Galili HER Galali 1 When the Function Key Guide appears select MM by moving the JOG button UP Next press the T kHz Hz 47 Hz nformation JOG button 2 Moveto controlling the JOG button UP DOWN and press the JOG button The current input source frequency and resolution will appear Picture Model S34E790C Options ma ka Picture Model 534E790C Screen Settings HDMI 1 DisplayPort Options m Settings DisplayPort IBAAN HYE Informat
30. SAMSUNG 726 7864 http www samsung com cl support COLOMBIA Bogota 600 12 72 http www samsung com co support Gratis desde cualquier parte del pafs 01 8000 112 112 6 desde su celular SAM 726 olo LATIN AMERICA COSTA RICA 0 800 507 7267 http www samsung com latin support Spanish 00 800 1 SAMSUNG 726 7864 http www samsung com latin_en support English DOMINICA 1 800 751 2676 http www samsung com latin support Spanish http www samsung com latin_en support English ECUADOR 1 800 10 72670 http www samsung com latin support Spanish 1 800 SAMSUNG 72 6786 http www samsung com latin_en support English EL SALVADOR 800 6225 http www samsung com latin support Spanish http www samsung com latin_en support English GUATEMALA 1 800 299 0013 http www samsung com latin support Spanish 1 800 299 0033 http www samsung com latin_en support English HONDURAS 800 27919267 http www samsung com latin support Spanish 800 2791 9111 http www samsung com latin_en support English JAMAICA 1 800 234 7267 http www samsung com latin_en support 1 800 SAMSUNG 726 7864 English MEXICO 01 800 SAMSUNG 726 7864 http www samsung com mx support NICARAGUA 001 800 5077267 http www samsung com latin support Spanish English http www samsung com latin_en support LATIN AMERICA PANAMA 800 7267 http www samsung com latin support Spanish 800 0101
31. Set to an optimum picture quality suitable for the working environment When the external input is connected through HDMI DP and PC AV Mode is set to AV maeicBright has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory You can activate either Dynamic Standard Movie or Custom You can select Custom which automatically recalls your personalized picture settings Dynamic Select this mode to view a sharper image than in Standard mode e Standard Select this mode when the surroundings are bright This also provides a sharp image e Movie Select this mode when the surroundings are dark This will save power and reduce eye fatigue Custom Select this mode when you want to adjust the image according to your preferences 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Color A detailed description of each function is provided Refer to your product for details Adjust the tint of the screen This menu is not available when WaGicBright is set to Cinema or Dynamic Contrast mode This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On Configure color settings Brightness Contrast Sharpness Game Mode MAGICBright Color HDMI Black Level Adjust the red Red saturation level Values closer to 100 mean greater intensity for
32. UP DOWN and press the JOG button 5 The selected option will be applied Transparency Set the transparency for the menu windows Configure the transparency of the menu windows Language Display Time Transparency The displayed image may differ depending on the model Changing Transparency 1 When the Function Key Guide appears select ED to display the corresponding menu screen 2 Moveto Options controlling the JOG button UP DOWN and press the JOG button 3 Moveto Transparency controlling the JOG button UP DOWN and press the JOG button e Off On 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Chapter 07 Setup and Reset A detailed description of each function is provided Refer to your product for details Settings Eco Saving USB Super Charging PC AV Mode DisplayPort Ver Source Detection Auto Key Repeat Time Acceleration Sound Mode Standard Select Sound Stereo The displayed image may differ depending on the model Configuring Volume 1 mn A W N When the Function Key Guide appears select II by moving the JOG button UP Next press the JOG button Move to Settings controlling the JOG button UP DOWN and press the JOG button Move to Sound controlling the JOG button UP DOWN and press the JOG button Adjust the Volume controlling the JOG button LEFT RIGHT The selected option wi
33. able before connecting all other cables Ensure you connect a source device first before connecting the power cable Ensure you connect a source device first before connecting the power cable o o a o o DPIN EICH PF AUDIO OUT 1 Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC AR 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 1 Connect an audio output device such as headphones or speakers to AUDIO OUT on the product 3 Change the input source to DisplayPort controlling the JOG button UP DOWN when input The sound could only be heard when using the HDMI to HDMI cable or DP cable source is not set Provided ports may vary depending on the product To display 3440 x 1440 60 Hz use a DP cable that supports 3440 x 1440 60 Hz Make sure that the graphics card of the DP source supports 3440 x 1440 60 Hz c4 Connecting the Power SAMSUNG CI 1 Connect the power cable to the DC power adapter Then connect the DC power adapter to the DC 22V port on the back of the product 2 Next connect the power cable to the power outlet 3 Press the JOG button on the back of the monitor to turn it on The input voltage is switched automatically ES Tidying Up the Connected Cables To remove the COVER
34. ay fall and injure children Edible oil such as soybean oil can damage or deform the product Do not install the product in a kitchen or near a kitchen counter Do not drop the product while moving Product failure or personal injury may result Do not set down the product on its front The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e The product may fall and become damaged and or cause an injury e Install the product only on cabinets or shelves of the right size Set down the product gently Product failure or personal injury may result Installing the product in an unusual place a place exposed to a lot of fine dust chemical substances extreme temperatures or a significant presence of moisture or a place where the product will operate continuously for an extended period of time may seriously affect its performance e Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place NI There is a high voltage inside the product Never disassemble repair or modify the product yourself e A fire or electric shock may result Contact Samsung Customer Service Centre for repairs To move the product first disconnect all the cables from it including the power cable Damage to the cord may result
35. ayed image may differ depending on the model PC AV Mode Set PC AV Mode to AV The picture size will be enlarged This option is useful when you view a movie Set to AV to enlarge Sound the picture Eco Saving USB Super Charging PC AV Mode DisplayPort Ver Source Detection Auto Key Repeat Time Acceleration Select the PC DisplayPort AV mode for the DisplayPort1 HDMI 1 source HDMI 2 The displayed image may differ depending on the model Supplied for the wide models only such as 16 9 or 16 10 7 If the monitor is in HDMI 1 HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates press the JOG button to display the function button screen and then select the ON icon You can select PC or AV Configuring PC AV Mode 1 When 2 Move 3 Move 4 Move Set to the Function Key Guide appears select MD by moving the JOG button UP Next press the JOG button o Settings controlling the JOG button UP DOWN and press the JOG button o PC AV Mode controlling the JOG button UP DOWN and press the JOG button o the HDMI 1 HDMI 2 DisplayPort controlling the JOG button UP DOWN and press the JOG button PC when connected to a PC Set to AV when connected to an AV device 5 Move 6 These o the desired option controlling the JOG button UP DOWN and press the JOG button ected option will be applied DisplayPort Ver Select your Displaypo
36. ck or fire may result from a damaged cable Do not use or keep combustible spray or an inflammable substance near the product An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e An increased internal temperature may cause a fire Do not insert metallic objects chopsticks coins hairpins etc or objects that burn easily paper matches etc into the product via the vent or input output ports etc Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Centre Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objects on top of the product e Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Centre e Product failure an electric shock or fire may result Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e Activate power saving mode or a moving picture screen saver if you will not be using the product for an extended period of time Disconnect the power cord from the power socke
37. corresponding direction button again Function Key Guide may vary depending on the function or product model Please refer to the actual product Direct Key guide Brightness Volume Features Game Mode Off The shortcut button screen OSD menu shown below is displayed only when the monitor screen is turned on the computer resolution changes or the input source changes UP DOWN Adjust Brightness Contrast Sharpness LEFT RIGHT Adjust Volume PRESS ENTER Display Function Key Guide The function buttons page shows if Game Mode is enabled E off ED On UW Function Key Guide UP DOWN LEFT RIGHT Move to the item you want The description for each item will appear when the focus changes PRESS ENTER The selected item will be applied To enter the main menu or to use other items press the JOG button to display the Function Key Guide You can exit by pressing the JOG button again Icons Description Selects Z to change the input signal by moving the JOG button in the Function Key Guide screen A message will appear on the top left corner of the screen if the input signal r has been changed IT Selects II by moving the JOG button in the function key guide screen The OSD On Screen Display of your Monitor s feature appears OSD control lock Maintain the current settings or lock the OSD control to prevent II unintended changes to settings Enable Disable To lock unlock
38. d press the JOG button PIPmode mj E gt PBP mode EI H The white area of the icon means that the Sound Source comes from the main screen sub screen or the left right screen 5 ove to the desired option controlling the JOG button UP DOWN and press the JOG button 6 The selected option will be applied Config uri ng Source Select the source for each screen 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button PIP Mode 2 Moveto Screen controlling the JOG button UP DOWN and press the JOG button available in PIP mode size mal mm 3 Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button Select the source 4 Move the JOG button UP DOWN to select Source and then press the JOG button for each screen PIP PBP Mode Size e DisplayPort HDMI 1 HDMI 2 Position 5 Move to the desired option controlling the JOG button UP DOWN and press the JOG button Sound Source 6 The selected option will be applied Source DisplayPort Image Size HDMI2 ka Contrast The input source for the main screen changes With the exception of the current input source the other two input sources can be selected The screen may flicker if the input signal is unstable The displayed image may differ depending on the model When the Function Key Guide appears move the JOG button LEFT to select the
39. devices at the same time as it has a limited number of input output ports available The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC If mult inconvenience pq iple source devices are connected to the PC the many cables around the PC may look messy Connecting the devices directly to the product will resolve such Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC This allows you to control the device from the PC or charge the device battery To detect and start a source device faster connect the device to the USB 3 0 port on the product 7 An external mass storage HDD requires an external power supply Be sure to connect it to a power source Hig devices h speed charging is possible using the ss 1 and s9442 ports only These ports charge devices faster than typical USB ports The speed depends on the connected Battery charging is possible in power saving mode However it is not possible when the product is powered off To charge a battery make sure that the USB upstream port on the product is connected to a PC via a USB cable Battery charging is not possible if the power cable is disconnected from the power socket Mobile devices should be purchas
40. ed image are depending onthemod l 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied H Position amp V Position H Position Move the screen to the left or right V Position Move the screen up or down This menu is only available when Image Size is set to Screen Fit in AV Mode When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally select Screen Fit to adjust horizontal position in 0 6 levels Not available when PIP PBP Mode is set to On Move the image displayed on the screen to the left or H Position right Image Size Screen Fit V Position PIP PBP Move the image displayed on the screen up or down Image Size Screen Fit H Position V Position PIP PBP The displayed image may differ depending on the model Configuring H Position amp V Position 1 UV A W N When the Function Key Guide appears select OI by moving the JOG button UP Next press the JOG button Move to Screen controlling the JOG button UP DOWN and press the JOG button Move to the H Position or V Position controlling the JOG button UP DOWN and press the JOG button Adjust the H Position or V Position controlling the JOG button LEFT RIGHT and press the JOG button The selected option will be applied PIP PBP The PIP Picture in Picture function separates the screen into two parts One
41. ed separately 28 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers An installation driver is contained on the CD supplied with the product If the file provided is faulty visit the Samsung homepage http www samsung com and download the file 1 Insert the user manual CD provided with the product into the CD ROM drive 2 Click Windows Driver 3 Follow the instructions given on the screen to proceed with installation Select your product model from the list of models 5 Goto Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase Select a language on the product and change the resolution on your PC to the optimum setting Setup Guide The optimal resolution for this monitor is as follows FR HH x Hz Follow the above settings to set the resolution Return 1 Select a language by moving the JOG button LEFT RIGHT Next press the JOG button 2 To hide the information message press the JOG button If the optimum resolution is not selected the message will appear up to three times for a specified time even when the product is turned off and on again The optimum resolu
42. equency For a mode that exceeds the supported resolution refer to Standard Signal Mode Table the message Not Optimum Mode will appear for a short time 7 The displayed resolution may vary depending on the product or PC system settings 4 Check the following Installation issue PC mode Issues The screen keeps switching on and off Check t Solutions he cable connection between the product and PC and ensure the connectors are locked Blank spaces are found on all four sides of the screen when an HDMI or HDMI DVI cable is connected to the product and PC The blank spaces found on the screen have nothing to do with the product Blank spaces on the screen are caused by the PC or graphics card To resolve the problem adjust the screen size in the HDMI or DVI settings for the graphics card If the graphics card settings menu does not have an option to adjust the screen size update the graphic s card driver to the latest version Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings Issues The power LED is off The screen will not switch on Check t Solutions hat the power cable is connected properly The message Check Signal Cable appears Check t hat the cable is properly connected to the product Check t hat the device connected to the product is powered on Not Optimum Mode is displayed This mes
43. etting USB Super Charging to On during a data transfer will stop the data transfer If you set USB Super Charging to Off USB Super Charging the standard charging and data transfer feature will be available High speed charging is possible using the ss 1and ss 2 ports only These ports charge devices faster than typical USB Charge the battery of a connected source device quickly using the USB 3 0 port ports The speed depends on the connected devices on the product Configuring USB Super Charging Set the USB Super charging mode 1 Sound When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Eco Saving USB Super Charging 2 Moveto Settings controlling the JOG button UP DOWN and press the JOG button PC AV Mode 3 Moveto USB Super Charging controlling the JOG button UP DOWN and press the JOG button DisplayPort Ver Source Detection Auto Off Disable USB Super Charging Key Repeat Time Acceleration On Enable the function to quickly charge a source device connected to the USB 3 0 port 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button Set the USB Port1 5D The selected option will be applied charging On Off Supported output by USB charging mode Standard USB charging 5 V up to 900 mA including USB 3 0 Fast USB charging 5 V up to 1 5 A Outputs may differ depending on the device specifications The displ
44. ff Blinking On Power Consumption Typical 64W 1W 0 5 W Max 77 W The displayed power consumption level can vary in different operating conditions or when settings are changed ENERGY STAR is a US registered mark of the United States Environmental Protection Agency Energy Star power is measured with the test method in the current Energy Star Standard SOG Sync On Green is not supported To reduce the power consumption to 0 disconnect the power cord Disconnect the power cable if you will not be using the product for an extended period of time during vacation etc m ANI NJ Standard Signal Mode Table Model Name S34E790C This product can be set to only one resolution for each screen size to obtain Synchronization Horizontal Frequency 30 90 kHz DisplayPort HDMI the optimum picture quality due to the nature ofthe panel Using a resolution Vertical Frequency 29 61 Hz DisplayPort other than the specified resolution may degrade the picture quality To avoid 24 61 Hz HDMI this it is recommended that you select Resolution Optimum resolution 3440 x 1440 60 Hz DisplayPort the optimum resolution specified for your product 3440 x 1440 50 Hz HDMI Maximum resolution 3440 x 1440 60 Hz DisplayPort 3440 x 1440 50 Hz HDMI If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatica
45. following conditions are satisfied Ie Adigital output device is connected using the HDMI DP cable Position The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of SoundiSource 43 these signals 16 9 This can only be set when the external input is connected through HDMI DP and PC AV Mode is set to AV Image Size a2 5 Move to the desired option controlling the JOG button UP DOWN and press the JOG button Screen Fit Source Contrast 6 The selected option will be applied The displayed image may differ depending on the model available in PBP mode Size HH In PCmode Select the source PIP PBP Mode for each screen Size Sound Source Source Image Size Contrast Image Size Apply Cancel The displayed image may differ depending on the model Set the Image Size for each of the divided screens 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button 2 Moveto Screen controlling the JOG button UP DOWN and press the JOG button 3 gt Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button 4 Movethe JOG button UP DOWN to select Image Size and then press the JOG button In PC mode Auto Display the picture according to the aspect ratio of the each screen input source Wide Display the picture in full screen regardless of the aspect ratio of
46. guring Off Timer 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button You can set the product to automatically turn off 2 Moveto Settings controlling the JOG button UP DOWN and press the JOG button Enable or disable OffTimer Ba the OffTimer 3 Move to Off Timer controlling the JOG button UP DOWN and press the JOG button Power LED On Stand by al Off Deactivate the off timer so that the product does not power off automatically eset On Activate the off timer so that the product powers off automatically 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Enable or disable Off Timer the Off Timer The displayed image may differ depending on the model Set the monitor to OffTimer automatically turn off after a certain Turn Off After time period The displayed image may differ depending on the model Configuring Turn Off After This option is only available when Off Timer is set to On 1 When the Function Key Guide appears select NM by moving the JOG button UP Next press the JOG button Move to Settings controlling the JOG button UP DOWN and press the JOG button Move to Off Timer controlling the JOG button UP DOWN and press the JOG button 2 3 4 Moveto Turn Off After controlling the JOG button UP DOWN and press the JOG button D Adjust the Turn Off After
47. h Stand IN 821 5 x 452 0 x 275 5 mm 9 9 kg Dimensions Wx H x D 32 3 x 17 8 x 10 8 Inches 21 8 Ibs AX 821 5 x 552 0 x 275 5 mm 9 9 kg D A 32 3 x 21 7 x 10 8 Inches 21 8 Ibs Maximum Pixel Clock 319 75 MHz DP si Power Supply AC 100 240V 10 96 50 60 Hz 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries Signal connectors HDMI DP Port Model Name S34E790C Environmental conditions Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 96 80 non condensing Storage Temperature 4 F 140 F 20 C 60 C Humidity 5 96 95 non condensing Due to the nature of the manufacturing of this product approximately 1 pixel per million 1 ppm may appear brighter or darker on the panel This does not affect product performance This device is a Class B digital apparatus PowerSaver The power saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode only functions when the product is connected to a PC with a power saving function PowerSaver Power Consumption Power saving mode Power off Power button Energy Star Test Condition Power Indicator O
48. ight speakers to play only the left channel of the sound source Right Channel Set the left and right speakers to play only the right channel of the sound source Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel This option is not available when MaeicBright is in Dynamic Contrast mode This menu is not available when Game Mode is enabled Adjust the power consumption of the product to save Eco Saving off energy Sound USB Super Charging Minimum PC AV Mode Maximum DisplayPort Ver Source Detection Auto Key Repeat Time Acceleration The displayed image may differ depending on the model Configuring Eco Saving 1 2 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Move to Settings controlling the JOG button UP DOWN and press the JOG button Move to Eco Saving controlling the JOG button UP DOWN and press the JOG button Off Deactivate the Eco Saving function Minimum Change the monitor power consumption to 50 of the default level Maximum Change the monitor power consumption to 75 of the default level Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied e S
49. ion 47047 BHB HOT kHz Hz Information The displayed image may differ depending on the model RRR AHE kHz Hz Configuring Brightness Contrast and Sharpness from the Initial Screen You can adjust Brightness Contrast or Sharpness by moving the JOG button up or down if no OSD menu is displayed Sharpness Brightness Contrast The displayed image may differ depending on the model Brightness is Menu is not avai This menu is not avai Contrast is menu is not avai is menu is not avai is menu is not avai s menu is not avai is menu is not avai ot available when P 1 Move the JOG bu ab ab ab ab ab ab ab ew ew ew ew ew ew ew ne ne ne ne ne SAMSUNG n MAGiGBright is set to Dynamic Contrast mode 1 Eco Saving is enabled n mae cBright is in Cinema or Dynamic Contrast mode n Game Mode is enabled 1 PIP PBP Mode is set to On and the Size is set to LI IR Mode SAMSUNG n MacicBright is in Cinema or Dynamic Contrast mode n Game Mode is enabled IP PBP Mode is set to On 2 Movethe JOG bu on UP DOWN to select Brightness Contrast or Sharpness on LEFT RIGHT to adjust the Brightness Contrast or Sharpness setting Configuring Volume in the Initial Screen You can adjust Volume by moving the JOG button left or right if no OSD menu is displayed Volume aa g
50. is user manual b you bring the unit to a repair centre and there is no defect in the product ie where you have failed to read this user manual e The amount of such administration charge will be advised to you before any work or home visit is carried out Securing the Installation Space Safety Precautions Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or greater when installing Caution the product RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK The exterior may differ depending on the product RPE a THERE ARE NO USER SERVICEABLE PARTS INSIDE 10 cm 3 93 Inches 4 REFER ALL SERVICING TO QUALIFIED PERSONNEL 1 10 om 3 93 Inches AN cm cm a ba Inches 3 93 Inches This symbol indicates that high voltage is present inside i It is dangerous to make any kind of contact with any internal part of this product 1 AN Li a 10cm 1 3 93 Inches This symbol alerts you that important literature concerning operation and maintenance has been aa included with this product Symbols Precautions for storage y High glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used Warning nearby A serious or fatal injury may result if inst
51. ll be applied o7 Configuring Sound Mode Volume Sound Mode Standard Select Sound Music Movie Clear Voice The displayed image may differ depending on the model BS W N When the Function Key Guide appears select ELI by moving the JOG button UP Next press the JOG button Move to Settings controlling the JOG button UP DOWN and press the JOG button Move to Sound controlling the JOG button UP DOWN and press the JOG button Move to Sound Mode controlling the JOG button UP DOWN and press the JOG button Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied Configuring Select Sound Volume Sound Mode Select Sound Stereo Left Channel Right Channel The displayed image may differ depending on the model BS W N When the Function Key Guide appears select EL by moving the JOG button UP Next press the JOG button Move to Settings controlling the JOG button UP DOWN and press the JOG button Move to Sound controlling the JOG button UP DOWN and press the JOG button Move to Select Sound controlling the JOG button UP DOWN and press the JOG button Stereo Enable the sound both from the left and right speakers Left Channel Set the left and r
52. lly be adjusted If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank even though the power LED turns on In such a case change the settings according to the following table by referring to the graphics card user manual Resolution Horizontal Frequency Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V kHz IBM 720 x 400 31 469 70 087 28322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152x870 68 681 75 062 100 000 VESA 640 x 480 31 469 59 940 25 175 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60317 40 000 VESA 800 x 600 48 077 72188 50 000 Resolution Horizontal Frequency Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V kHz Horizontal Frequency VESA 800 x 600 46 875 75 000 49 500 The time required to scan a single line VESA 1024 x 768 48 363 60 004 65 000 J from the left to the right side of the screen is called a horizontal cycle The VESA 1024 x 768 56476 70 069 75 000 sf reciprocal number of a horizontal cycle is called horizontal frequency Horizontal VESA 1024 x 768 60 023 75 029 78 750 frequency is measured in kHz VESA 1152 x 864 67 500 75 000 108 000 Vertical Frequency Repeating the same pic
53. lor 36 Configuring Color 36 HDMI Black Level 37 Configuring the HDMI Black Level Settings 37 Response Time 38 Configuring the Response Time 38 Table of contents Screen Adjustment Setup and Reset Image Size 39 Changing the Image Size 39 H Position amp V Position 41 Configuring H Position 8 V Position 41 PIP PBP 42 Configuring PIP PBP Mode 43 Configuring Size 44 Configuring Position 45 Configuring Sound Source 46 Configuring Source 47 Configuring Image Size 49 Configuring Contrast 52 Coordinating OSD Language 54 Configuring Language 54 Display Time 55 Configuring Display Time 55 Transparency 56 Changing Transparency 56 Sound 57 Configuring Volume 57 Configuring Sound Mode 58 Configuring Select Sound 59 Eco Saving 60 Configuring Eco Saving 60 USB Super Charging 61 Configuring USB Super Charging 61 PC AV Mode 62 Configuring PC AV Mode 62 DisplayPort Ver 63 Configuring DisplayPort Ver 63 Source Detection 64 Configuring Source Detection 64 Key Repeat Time 65 Configuring Key Repeat Time 65 Off Timer 66 Configuring Off Timer 66 Configuring Turn Off After 67 Power LED On 68 Configuring Power LED On 68 Reset All 69 Initializing Settings Reset All 69 Information Menu and Others Information 70 Displaying Information 70 Configuring Brightness Contrast and Sharpness from the Initial Screen 71 Configuring Volume in the Initial Screen 72 Volume
54. lution Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution Question How do I set power saving mode Answer Windows XP Set power saving mode in Control Panel Appearance and Themes Display s Screen Saver Settings or BIOS SETUP on the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC Windows Vista Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 8 Windows 8 1 Set power saving mode in Settings Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Chapter 11 Specifications Size General Model Name Panel Size 34 Class 34 Inches 86 cm Display area 797 22 mm H x 333 72 mm V Display area 31 4 Inches H x 13 1 Inches V u H Pixel Pitch 0 23175 mm H x 0 23175 mm V 0 009124 Inches H x 0 009124 Inches V V Dimensions W x Hx D Without Stand 821 5 x 364 0 x 51 5 mm 74 kg Weight 32 3 x 14 3 x 2 0 Inches 16 3 Ibs Wit
55. on source devices may differ from device to device Do not connect the power cable until all connections are completed Connecting the power cable during connection may damage the product Check the types of ports at the back of the product you want to connect Connecting and Using a PC Select a connection method suitable for your PC 7 Connecting parts may differ in different products Connection Using the HDMI Cable Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable mem HDMI IN 1 HDMI IN 2 M0 gt 1 Connect the HDMI IN 1 or HDMI IN 2 port on the back of the product to the H DMI port on the PC using an HDMI cable 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 3 Change the input source to or controlling the JOG button UP Provided ports may vary depending on the product DOWN when input source is not set To display 3440 x 1440 50 Hz use an HDMI cable that supports 3440 x 1440 50 Hz Make sure that the graphics card of the HDMI source supports 3440 x 1440 50 Hz Connection Using the DP Cable Connecting to Headphones or Speakers 7 Do not connect the power cable before connecting all other cables 7 Do not connect the power c
56. ot be applied to other functions on your PC Options Set the menu language gt Display Time Transparency Espa ol Fran ais Italiano The displayed image may differ depending on the model Configuring Language 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 3 4 5 Move Move Move The se o Options controlling the JOG button UP DOWN and press the JOG button o Language controlling the JOG button UP DOWN and press the JOG button o the desired option controlling the JOG button UP DOWN and press the JOG button ected option will be applied 54 Display Time Set the on screen display OSD menu to automatically disappear if the menu is not used for a specified period of time Display Time can be used to specify the time after which you want the OSD menu to disappear Set how long the menu window will remain on screen Display Time for when it is not in use Language Transparency The displayed image may differ depending on the model Configuring Display Time 1 When the Function Key Guide appears select ED to display the corresponding menu screen 2 Moveto Options controlling the JOG button UP DOWN and press the JOG button 3 Move to Display Time controlling the JOG button UP DOWN and press the JOG button e 5sec T10 sec 20 sec 200 sec 4 Move to the desired option controlling the JOG button
57. ow can I change the frequency Answer Set the frequency on your graphics card Windows XP Go to Control Panel Appearance and Themes Display Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows ME 2000 Go to Control Panel Display Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel Appearance and Personalization Personalization Display Settings Advanced Settings Monitor and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings How can I change the resolution Windows XP Go to Control Panel Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel Display Settings and adjust the resolution Windows Vista Go to Control Panel Appearance and Personalization Personalize Display Settings and adjust the resolution Windows 7 Go to Control Panel Appearance and Personalization Display Adjust Resolution and adjust the reso
58. ponents may differ from the images shown Recommend to use the HDMI cable CP and DP cable which is provided by the supplier gt Warranty card The optimal resolution may not be Quick Setup Guide f i Regulatory guide User manual Not available in some locations available when using a non high speed HDMI or HDMI DVI cable To ensure that the screen displays properly a DP cable that supports 3440 x B 440 60 Hz is recommended An HDMI 4 cable that supports 3440 x 1440 50 Hz WESEN DC power adapter Detachable The Mini DP to DP gender changer may P25 RDM cable E23 DP cable P24 not be provided depending on the model USB 3 0 cable P 27 Mini DP to DP gender Optional Cleaning cloth Parts Control Panel 7 The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality JOG Button Function Key Guide IT RIGHT E 1 CT SAMSUNG Cl O Icons Description Multi directional button that helps navigate JOG Button a E as The JOG button is located on the rear left side of the product The button can be used to move up down left or right or as Enter Press the JOG button when the screen is turned on The Function Key Guide will appear To access the onscreen menu when the guide Function Key Guide is displayed press the
59. ransmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second The horizontal frequency is indicated in 85kHz Vertical Frequency 757 One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and affects screen flicker Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1920 horizontal pixels horizontal resolution and 1080 vertical lines vertical resolution Plug amp Play 73 The Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play
60. rt Displayport 1 1 supports High Bit Rate 1 while 1 2 supports High Bit Rate 2 Select your Displayport Displayport 1 1 Eco Saving supports HBR 1 while 1 2 supports USB Super Charging HBR2 Sound PC AV Mode DisplayPort Ver Source Detection Key Repeat Time The displayed image may differ depending on the model Incorrect settings may cause the screen to go blank If this occurs check the device specifications If the monitor is in HDMI 1 HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates press the JOG button to display the function button screen and then select the ll icon You can select 1 1 or 1 2 Configuring DisplayPort Ver 1 When the Function Key Guide appears select MM by moving the JOG button UP Next press the JOG button 2 Moveto Settings controlling the JOG button UP DOWN and press the JOG button 3 Moveto DisplayPort Ver controlling the JOG button UP DOWN and press the JOG button eae ee 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Source Detection Configuring Source Detection 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button You can activate Source Detection 2 Moveto Settings controlling the JOG button UP DOWN and press the JOG button Decide how input sources will be 3 detected So
61. ructions are not followed Personal injury or damage to properties may result if instructions are not followed O Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product Service fee will be charged Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning The following images are for reference only Real life situations may differ from what is shown in the images Po E 1 Power off the product and computer 2 Disconnect the power cord from the product Hold the power cable by the plug and do not touch the cable with wet hands Otherwise an electric shock may result 3 Wipe the monitor with a clean soft and dry cloth Donot apply a cleaning agent that contains alcohol were solvent or surfactant to the monitor re bi Do not spray water or detergent directly on the product 4 Weta soft and dry cloth in water and wring thoroughly to clean the exterior of the product 5 Connect the power cord to the product when cleaning is finished 6 Power on the product and computer Electricity and Safety The following images are for reference only Real life situations may differ from what is shown in the images
62. s the A wey and tap P Maka test and er tera larger o mele What Ingay etag souk oot To maximize the picture quality it is recommended to use a graphics card that supports WOHD 3440 x 1440 resolution When the PIP PBP function is enabled the resolution will not be able to automatically switch to the optimum resolution due to a compatibility issue between the graphics card and the Windows system Set PIP PBP Mode to Off or manually change the resolution to the optimum resolution using the Windows interface 4 Configuring PIP PBP Mode Image Size Screen Fit H Position V Position PIP PBP PIP PBP Mode The displayed image may differ depending on the model Configure the settings for using Picture in Picture Picture by Picture Turn PIP PBP Mode on or off Enable or disable the PIP PBP Mode function 1 When the Function Key Guide appears select IJ by moving the JOG button UP Next press the JOG button 2 Moveto Screen controlling the JOG button UP DOWN and press the JOG button 3 gt Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button 4 Moveto the PIP PBP Mode controlling the JOG button UP DOWN and press the JOG button Off On 5 Move to the desired option controlling the JOG button UP DOWN and press the JOG button 6 The selected option will be applied Configuring Size Select the size and aspect ratio of the PIP PBP Mode sub screen Si
63. sage appears when the signal from the graphics card exceeds the maximum resolution or frequen cy for the product Change the maximum resolution and frequency to suit the product performance referring to Standard Signal Mode Table P83 The images on the screen look distorted Check t he cable connection to the product Issues The screen is not clear The screen is blurry Solutions Remove any accessories video extension cable etc and try again Set the resolution and frequency to the recommended level The screen appears unstable and shaky Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product Next if required change the settings referring to Standard Signal Mode There are shadows or ghost images left on the screen Table P 83 in this manual and the Information menu on the product The screen is too bright The screen is too dark Adjust Brightness and Contrast Screen colour is inconsistent Change the Color settings The colours on the screen have a shadow and are distorted Change the Color settings White does not really look white Change the Color settings There is no image on the screen and the power LED blinks every 0 5 to 1 second The product is opera ing in power saving mode Press any key on the eyboard or move the mouse to return to normal operating mode
64. source device is displayed on the main screen at the same time the another source device is displayed in inset windows The PBP Picture by Picture function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen 7 Compatible with Windows7 and Windows8 The PIP PBP function may not be available depending on the specifications of the graphics card used If the screen is blank in PIP PBP mode when the optimum resolution is selected go to Control Panel Display Screen Resolution and click Detect on the PC Instructions are based on Windows 7 If the screen is blank when the resolution is set to the optimum resolution change the resolution to 1280 x 1024 The screen may flicker briefly or appear after a delay when you enable or disable the PIP PBP function or when you change the screen size with the PIP PBP function activated This can typically arise when a PC and a monitor are connected to two or more input sources It has nothing to do with the performance of a monitor The issue is mainly caused when the video signals are delayed in transmission to the monitor depending on the graphics card performance CE All Controt Panel Reme Display Screen Recoktion Change the appearance of your displays Masupie al p aye Show aauanp cay an Aag Thus ve currently your man onpuy AGrarced tenor Cenaers to a peoyeenor or pres
65. t 50 The displayed image may differ depending on the model Volume 1 Adjust the Volume controlling the JOG button LEFT RIGHT If the audio quality of a connected input device is poor the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers Set the input volume for the input device to at least 2096 and control the volume using the volume control JOG button LEFT RIGHT on the product What is Auto Mute The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak usually due to a problem with the volume of an input device 72 Chapter 09 Installing the Software Easy Setting Box Ed Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the Easy Setting Box setup programme If the pop up screen for the software installation does not appear on the main screen find and double click the Easy Setting Box setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Follow the instructions given on the screen to proceed with installation The software may not work properly if you do not restart the computer after the installation The Easy Setting Box icon may not appear depending on the computer system and the product specifications
66. t This menu provides an optimum picture quality suitable for the environment where the product will be used This menu is not available when Eco Saving is enabled This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On You can customize the brightness to suit your preferences Set to an optimum picture quality suitable for 75 the working environment Brightness En O Contrast Sharpness Game Mode Custom Standard MAGIGBright ee Color HDMI Black Level Dynamic Contrast Cinema The displayed image may differ depending on the model Configuring SAMSUNG MAGIC Bright 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto Picture controlling the JOG button UP DOWN and press the JOG button 3 Move to MaeicBright controlling the JOG button UP DOWN and press the JOG button Custom Customize the contrast and brightness as required Standard Obtain a picture quality suitable for editing documents or using Internet Cinema Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content Dynamic Contrast Obtain balanced brightness through automatic contrast adjustment Brightness U Contrast 75 Sharpness Game Mode Bipamic Standard MAGI CBright a Color HDMI Black Level Custom Movie The displayed image may differ depending on the model
67. t if you do not plan on using the product for an extended period of time vacation etc Dust accumulation combined with heat can cause a fire electric shock or electric leakage Use the product at the recommended resolution and frequency e Your eyesight may deteriorate Do not put DC power adapters together Otherwise a fire may result Remove the plastic bag from the DC power adapter before you use it Otherwise a fire may result Do not let water enter the DC power device or get the device wet An electric shock or fire may result Avoid using the product outdoors where it can be exposed to rain or SNOW e Be careful not to get the DC power adapter wet when you wash the floor Do not put the DC power adapter near to any heating apparatus Otherwise a fire may result Keep the DC power adapter in a well ventilated area Do not hold the product upside down or move it by holding the stand The product may fall and become damaged or cause an injury Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not use humidifiers or stoves around the product Afire or electric shock may result Rest your eyes for more than 5 minutes for every 1 hour of product use e Eye fatigue will be relieved Do not touch the screen when the product has been
68. ting the tilt push or pull the top area of the product at the centre while holding the top of the stand 20 The colour and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Do not hold the product upside down only by the stand Anti theft Lock An anti theft lock allows you to use the product securely even in public places 7 The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details SAMSUNG 1 Fixthe cable of your anti theft locking device to a heavy object such as a desk Put one end of the cable through the loop on the other end nsert the locking device into the anti theft lock slot at the back of the product BS W N Lock the locking device An anti theft locking device can be purchased separately Refer to the user guide provided with your anti theft locking device for details Anti theft locking devices can be purchased at electronics retailers or online Ce Chapter 03 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices Pre connection Checkpoints Before connecting a source device read the user manual provided with it The number and locations of ports
69. tion can also be selected in Control Panel on your PC Chapter 04 Screen Setup Configure the screen settings such as brightness A detailed description of each function is provided Refer to your product for details You can adjust the general brightness of the picture Range 0 100 A higher value will make the picture appear brighter This menu is not available when Ma eicBright is set to Dynamic Contrast mode This menu is not available when Eco Saving is set Picture Adjust the brightness level Bishines5 values coser to 100 Contrast U 75 meana brighter screen Sharpness Ha 90 Game Mode Off MAGIG Bright Custom Color gt o HDMI Black Level The displayed image may differ depending on the model Configuring Brightness 1 mn A w N When the Function Key Guide appears selec Move to Picture controlling the JOG button Move to Brightness controlling the JOG but Adjust the Brightness controlling the JOG b The selected option will be applied IT by moving the JOG button UP Next press the JOG button UP DOWN and press the JOG button on UP DOWN and press the JOG button utton LEFT RIGHT 30 Contrast Adjus the contrast between the objects and background Range 0 100 A higher value will increase the contrast to make the object appear clearer Thi Thi SAMSUNG s option is not available when Ma eleBright is in Cinema or
70. tton and then press the JOG button 5 The selected option will be applied HDMI Black Level If a DVD player or set top box is connected to the product via HDMI image quality degradation contrast colour degradation black level etc may occur depending on the connected source device In such case HDMI Black Level can be used to adjust the image quality If this is the case correct the degraded picture quality using HDMI Black Level 7 This function is only available in HDMI 1 or HDMI 2 mode Not available when PIP PBP Mode is set to On Optimize HDMI picture brightness and contrast by Contrast adjusting the black level of the video Sharpness signal Brightness Game Mode MAGICBright Color HDMI Black Level The displayed image may differ depending on the model Configuring the HDMI Black Level Settings 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto Picture controlling the JOG button UP DOWN and press the JOG button 3 Move to HDMI Black Level controlling the JOG button UP DOWN and press the JOG button Normal Select this mode when there is no contrast ratio degradation Low Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied
71. ture dozens of VESA 1280 x 720 45 000 60 000 74 250 t ond allows you to vie HA AE NAAN VESA 1280 x 800 49702 59810 83 500 pa natural pictures The repeat frequency is called vertical frequency or refresh rate VESA 1280 x 1024 63 981 60 020 08 000 and is indicated in Hz VESA 1280 x 1024 79 976 75 025 35 000 VESA 1440 x 900 55 935 59 887 06 500 VESA 1600 x 900 RB 60 000 60 000 08 000 VESA 1680 x 1050 65 290 59954 46 250 VESA 1920 x 1080 67 500 60 000 48 500 CEA 861 2560 x 1080 66 000 60 000 98 000 VESA 2560 x 1440 RB 88 787 59 951 241 500 VESA 3440 x 1440 30Hz 43 819 29 993 157 750 VESA 3440 x 1440 50Hz 73 681 49 987 265 250 VESA 3440 x 1440 DP 88819 59 973 319 750 Chapter 12 Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre NORTH AMERICA U S A 1 800 SAMSUNG 726 7864 http www samsung com us support CANADA 1 800 SAMSUNG 726 7864 http www samsung com ca support English http www samsung com ca_fr support French LATIN AMERICA ARGENTINE 0800 333 3733 http www samsung com ar support BOLIVIA 800 10 7260 http www samsung com cl support BRAZIL 0800 124 421 Demais cidades e regides http www samsung com br support 4004 0000 Capitais e grandes centros CHILE 800
72. turned on for an extended period of time as it will become hot Store small accessories out of the reach of children Exercise caution when adjusting the product angle or stand height Your hand or finger may get stuck and injured e Tilting the product at an excessive angle may cause the product to fall and an injury may result Do not place heavy objects on the product Product failure or personal injury may result When using headphones or earphones do not turn the volume too high Having the sound too loud may damage your hearing NJ Correct posture to use the product CHAS Use the product in the correct posture as follows Straighten your back Allow a distance of 45 to 50cm between your eye and the screen and look slightly downward at the screen Keep your eyes directly in front of the screen e Adjust the angle so light does not reflect on the screen Keep your forearms perpendicular to your upper arms and level with the back of your hands Keep your elbows at about a right angle Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Chapter 02 Preparations Checking the Components Contact the vendor where you Components purchased the product if any components are missing j Components may vary depending on the country The appearance of the com
73. und Move to Source Detection controlling the JOG button UP DOWN and press the JOG button Eco Saving f Auto The input source is automatically recognized USB Super Charging e Manual Manually select an input source PC AV Mode DisplayPort Ver Ato 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button Source Detection Manual 5 The selected option will be applied Key Repeat Time The displayed image may differ depending on the model Key Repeat Time Control the response rate of a button when the button is pressed Configure the Sound response rate of a button when the Eco Saving button is pressed USB Super Charging PC AV Mode Acceleration 1 sec DisplayPort Ver 2sec Source Detection No Repeat Key Repeat Time The displayed image may differ depending on the model Configuring Key Repeat Time 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto Settings controlling the JOG button UP DOWN and press the JOG button 3 Move to Key Repeat Time controlling the JOG button UP DOWN and press the JOG button Acceleration 1 sec or 2 sec can be selected If No Repeat is selected a command responds only once when a button is pressed 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Off Timer Confi
74. ung com sk support SLOVENIA 080 697 267 http www samsung com si 090 726 786 SPAIN 0034902172678 http www samsung com es support SWEDEN 0771 726 7864 SAMSUNG http www samsung com se support SWITZERLAND 0800 726 78 64 0800 SAMSUNG http www samsung com ch support German http www samsung com ch_fr support French UK 0330 SAMSUNG 7267864 http www samsung com uk support CIS ARMENIA 0 800 05 555 http www samsung com suppo AZERBAIJAN 0 88 555 55 55 http www samsung com suppo BELARUS 810 800 500 55 500 http www samsung com suppo GEORGIA 0 800 555 555 http www samsung com suppo KAZAKHSTAN 8 10 800 500 55 500 GSM 7799 VIP care 7700 http www samsung com suppo KYRGYZSTAN 8 10 800 500 55 500 http www samsung com kz_ru support MOLDOVA 0 800 614 40 http www samsung com suppor MONGOLIA 7 495 363 17 00 http www samsung com suppor RUSSIA 8 800 555 55 55 http www samsung com ru support TADJIKISTAN 8 10 800 500 55 500 http www samsung com support UKRAINE 0 800 502 000 http www samsung com ua support Ukrainian http www samsung com ua_ru support Russian UZBEKISTAN 8 10 800 500 55 500 http www samsung com support CHINA CHINA 400 810 5858 http www samsung com cn support HONG KONG 852 3698 4698 http www samsung com hk support Chinese http www samsung com hk_en support English
75. when PIP PBP Mode is setto On Adjust the Sharpness controlling the JOG button LEFT RIGHT vv A WU N The selected option will be applied Adjust the R a sharpness ofthe picture Values Contrast 75 closer to 100 mean a sharper image Brightness Sharpness 00 Game Mode Off MAGIGBright Custom Color gt HDMI Black Level The displayed image may differ depending on the model Game Mode Configuring Game Mode 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Configure the product screen settings for game mode Use this feature when playing games on a PC or when a game console such as PlayStation or Xbox is connected Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Game Mode controlling the JOG button UP DOWN and press the JOG button Optimizes image settings for playing Move to the desired option controlling the JOG button UP DOWN and press the JOG button Brightness ne Ga Contrast vv A W N Sharpness The selected option will be applied Game Mode Oii MAGIEBright 2 Color HDMI Black Level When the monitor turns off enters power saving mode or changes input sources Game Mode turns Off even if it is set to On Always On o If you want to keep Game Mode enabled all the time select Always On The displayed image may differ depending on the model SAMSUNG MAGIC Brigh
76. ze Sound Source Source Image Size Contrast The displayed image may differ depending on the model Select the size and aspect ratio of the sub screen 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button 2 Moveto Screen controlling the JOG button UP DOWN and press the JOG button 3 gt Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button 4 Moveto the Size controlling the JOG button UP DOWN and press the JOG button EH Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1720 x 1440 width x height Select the icon image if you want to use PIP mode where the optimum resolution for the sub screen is 720 x 480 width x height Cm Select the icon image if you want to use PIP mode where the optimum resolution of the sub screen is 1280 x 720 width x height Com Select the icon image if you want to use PIP mode where the optimum resolution of the sub screen is 1720 x 720 width x height D Move to the desired option controlling the JOG button UP DOWN and press the JOG button 6 The selected option will be applied Configuring Position Select the position PIP PBP Mode of the sub screen from the available Size options Position Sound Source Source Image Size Contrast The displayed image

Samsung S34E790C

Contents

Download Pdf Manuals

Related Search

Related Contents