JUNG R AN LS 914 WW
Contents
1. Stereo Radio Art No R AN 514 R AN 914 ALBRECHT JUNG GMBH amp CO KG Volmestrasse 1 58579 Schalksm hle Germany mail info jung de www jung de Safety instructions Caution Electrical devices may only be installed and fitted by electrically skilled persons Non compliance with the installation information could cause damage to the device fire or other hazards Danger of electric shock Before working on the device disconnect the power or load and switch off the circuit breakers Danger of electric shock Loudspeaker connections and power supply may not be wired in one socket These instructions are a component part of the product and must remain with the end customer Structure of the device Figure 1 Structure of the radio device Radio Button set Plastic screws Frames Supporting ring with power supply Lever Power supply interface NOaRWN gt Function Correct use e Installation in two concealed appliance boxes according to DIN EN 49073 recommendation deep boxes VHF reception in the frequency range 87 5 MHz to 108 MHz Product characteristics Stereo reception Connection terminal for additional external loudspeaker right stereo channel Automatic recognition of the second loudspeaker Automatic switching from mono to stereo op2. eeeeeeeeeeeteeeeenteaeees approx 15 90 no dew Frequency range ac cccccseedccceeseeseceeeeedeccceneedeateenersesneceneneduese 87 50 MHz 108 00 MHz Protection Class ut ne in aaaea a aa a IP 20 Separate loudspeaker connection cable nne Twin loudspeaker cable E EAE E A EE E EEE HO3VH H 2 x 0 75 ER O E A Alternative JY st Y 2x2x0 6 mm Max Tem tne 4 AA OAE 10 m Connection u uuuenaseneeannnnnnnnnnnannnnen nenn Screw terminals 1 x 2 5 mm or 2 x 1 5 mm Warranty We reserve the right to modify technical and formal characteristics of the product insofar as this supports technical progress Our products are under guarantee within the scope of the statutory provisions Please send the device postage paid to our central Customer Service Centre with a description of the error ALBRECHT JUNG GMBH amp CO KG Service Centre Kupferstr 17 19 44532 L nen Germany Telephone 49 0 2355 80 60 Fax 49 0 2355 80 61 89 kundencenter jung de The CE mark is a free trade symbol intended solely for the authorities and does not carry any guarantee of properties ALBRECHT JUNG GMBH amp CO KG Volmestrasse 1 58579 Schalksm hle Germany Telephone 49 0 2355 806 0 Fax 49 0 2355 806 189 mail info jung de www jung de 0024013722 03 2012
3. eration when there is sufficient signal strength and a second loudspeaker is connected e Simple operation with additional feedback LED Blue LED lit up operational display Blue LED flashing Sleep mode active Red LED lit up favourite channel High quality sound and large loudspeaker dynamics Optimised acoustics through the use of a base reflex tube Integrated VHF aerial High reception quality Automatic and manual channel search Non volatile storage of 4 favourite channels saved channels remain stored when power supply fails Switch on with most recent channel and saved volume Sleep mode switch off after approx 30 minutes e Switching on off possible via extension connection together with the room lighting Switching on off via potential free contact A B e g switch or timer switch with potential free contact Operation Switching radio on off 3 Press button briefly Device switches on off The blue LED lights switches off il The most recently set channel will be called up with the most recently set volume Sleep mode 3 The radio is switched on Press and hold button approx 3 seconds The long press will be acknowledged with a sound The blue LED flashes The radio switches off after approx 30 minutes Automatic channel search Press and hold the button s full surface approx 3 seconds The long press will be acknowledged with a sound The entire frequency range wi
4. ll be scanned and the four strongest channels saved automatic memory assignment li Memory will be overwritten Manual channel search Searching for channels in ascending descending frequency Press button briefly The next channel will be selected Saving overwriting favourite channel The desired channel frequency is selected Press and hold approx 3 seconds 1 2 B or 4 desired memory button The saving will be acknowledged with a sound The channel frequency is saved il If the memory slot is already assigned it will be overwritten with the frequency of the new channel Deselecting favourite channel Briefly press 1 2 B or 4 memory button The associated red LED flashes The stored channel will be received Volume d The button sets the volume Press button louder Press button quieter Information for electrically skilled persons Installation and electrical connection DANGER Touching live parts can result in an electric shock An electric shock can be fatal Before working on the device disconnect the power and cover live parts in the area Installing and connecting radio Installation in two concealed appliance boxes according to DIN EN 49073 Inthe LS series the installation can also be performed x2 and x3 in surface caps The installation can be performed either vertically or horizontally Vertical installation loudspeaker on top Fig 2 left Horizontal ins
5. tallation loudspeaker on left Fig 2 right A ooo0osseDocopaccqooonong SocqGc0g00 90000dg0000000000 Figure 2 Vertical and horizontal installation li For series A CD and FD lever 6 position A for series LS position B Fig 1 Additional loudspeaker Series A and CD An additional loudspeaker must be fitted in a separate frame LS series An additional loudspeaker can be fitted in the same frame or a separate one The cable length may not exceed 10 m il Longer cables lead to sound glitches and interference max 10 m Doonoonaononannaanaananng Figure 3 Additional loudspeaker fitted Power supply connection according to the circuit diagram Fig 4 Connection and on the radio Fig 5 to connect an additional loudspeaker on the right for stereo operation Use the cable enclosed I 1 5 m Connection A and B on radio Fig 5 for connection to a potential free contact e g switch or timer switch with potential free contact Attach the radio with the frame to the insert Ensure contact with the power supply Fasten radio to the supporting ring 3 with the enclosed plas
6. tic screws Only tighten the plastic screws lightly Snap on covers 2 li The aerial is integrated DANGER When connecting the loudspeakers or potential free contact and power supply wires to a shared device socket the loudspeakers or potential free contact cables may come into contact with mains voltage The safety of the entire radio installation will be endangered People can also receive an electrical shock at devices that have been disconnected Lay the loudspeaker or line out cables in separated device sockets in the additional insulation sleeves L N AC 230 V gt Netzteit f r rado LO 006026000 N NG Figure 4 Power supply connection L N AC 230 V connection 1 extension connection Figure 5 Connection of an external loudspeaker and potential free contact External right loudspeaker connection A B potential free loudspeaker contact connection Start up An automatic channel search takes place on the first start up The entire frequency range will be scanned and the four strongest channels saved in memory slots 1 to 4 Appendix Technical data Rated Voltage us ccc dsdedevesiheedese heeded apesdenceastdesaeastasrd dh apecednceaeeaveiieads AC 230 V Frequency anne iieenieee ide gelleobend 50 60 Hz Ambient temperature approx 2424444444nnnneennnnnnnnnnnnnnnnnnnnnnnannnnnnnnnn nen 0 50 C Relative humidity 0 eceeeeeeeeeeeeec
Download Pdf Manuals
Related Search