Powerplus POWXQ5250 cordless combi drill
Contents
1. 21 24 Z For heavy drilling ES For hammer drilling 9 7 Setting the impact drilling mode Fig 8 With the torque setting ring you can select between drilling screwdriver and impact drilling Impact drilling Rotate and set the torque setting ring to the impact drilling symbol U In the impact drilling position the safety clutch is deactivated and the maximum power is always effective 9 8 Speed selector Fig 9 NOTE Mark LOW is Low speed position mark HIGH is High speed position that are moulded onto the button of the two speed selector The drill has a two speed gear 2 train designed for drilling at LOW or HIGH speed A gear selector is located on top of the drill to select either low or high speed When you select low speed range the speed will decrease but will provide more power and torque When using drill in the high speed range speed will increase but will provide less power and torque Use low speed for high power and torque application and high speed for fast drilling applications Important NEVER adjust this two speed selectorwhilst the drill is running Always let it come to a complete stop first 9 9 LED light Fig 10 The LED worklight 10 can light prior to motor running if you press the switch lightly which keep the work area to be lighted for checking clearly at first and it lights also during your operation WARNING Do not stare directly at the light beam Never aim the beam a2. TECHNICAL DE FAILS cci cxiec tb duscEexkiux EE M FOU DE ET EMnEFETI FEE SEE iu inEEds 11 SOUND EMISSION iid us ntti cas Labia ex fui oded cei ode usa puras c wena rcc 12 WARRANTY ec M 12 ENVIRONMENT essisicnsapEE iE nunEN pEEaxRU EAE uE SES EE UN EKUNEUE NEU MEC ennnen nne 13 zzgl qe M 13 DECLARATION OF CONFORMITY eee 13 Copyright O 2011 VARO Page 2 www varo com POWERPLUS X J POWXQ5250 EN CORDLESS HAMMER DRILL 18V LI ION POWXQ5250 1 APPLICATION The power tool is intended for driving and drilling through wood metal plastics and masonry It is not designed for commercial use instructions carefully before using the appliance Your power tool should WARNING For your own safety read this manual and general safety only be passed on together with these instructions 2 DESCRIPTION FIG 1 2 Depth gauge Speed selector switch knob Forward reverse knob ON OFF switch trigger Battery pack release button Battery pack Buckle Auxiliary handle Magnetic plate LED work light Torque adjustment ring Keyless chuck with lock PACKAGE CONTENT LIST Remove all packaging materials Remove remaining packing and package inserts if included Check that the package contents are complete Check the appliance the power cord the power plug and all accessories for transportation damage Keep the packing materials as long as pos
3. Fig 4 2121 Lesser elle eeeeee eniin nnn 8 Switch Fig 5 RENE 8 W Fl HOG Kea sass eenanite aden ain seceth sand sastisiecet Madden cbt ie cen baanmanetaeoncastanbencteleccsta 8 Installing removing bits Fig 7 uisiisenane sectae su d a2 Decii td a etam sa Reo aeta st ena E evoca ee epos 8 Adjusting the torque Fig 8 scscsscssacecsccsiessnctnnveusenszeenetetrcassensvenssccsntexveeseuersacceneessie 9 Setting the impact drilling mode Fig 8 2 esses 9 Speed selector FIG M 9 Copyright O 2011 VARO Page 1 www varo com POWERPLUS POWXQ5250 EN HIGH QUALITY 9 9 9 10 9 11 9 12 10 10 1 10 2 10 3 11 11 1 11 2 11 3 12 13 14 15 16 16 1 17 LED light Fig 10 REM 9 Magnetic plate Fig 11 PU T 9 Auxiliary handle subassembly Fig 12 ssssscccenesceccccceeennnneceseenennsseesseeenennsenseneees 10 Depth Gauge 1 ee 10 sS C 10 Wood ONINI mt 10 Metal OUNO pc 10 Masonry GUNNING MM X 10 CLEANING AND MAINTENANCE eene 11 CORNING REN 11 uz Ier Tap oi NT 11 Connecting cable and mains plug 1221 sesseeee esee eee een n nnne n annua unn nnn 11 STORAGE p 11
4. O 2011 VARO Page 4 www varo com POWERPLUS X J POWXQ5250 EN 5 3 Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool when you are tired or under the influence of drugs alcohol or medication A moment of inattention when operating a power tool may result in serious personal injury Use safety equipment Always wear eye protection Using safety equipment such as a dust mask non skid safety shoes a hard hat or hearing protection whenever it is needed will reduce the risk of personal injury A Avoid accidental starts Ensure the switch is in the off position before inserting the plug Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely Remove any adjusting keys or spanners before turning on the power tool A spanner or key left attached to a rotating part of the power tool may result in personal injury Do not reach out too far Keep your feet firmly on the ground at all times This will enable you retain control over the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from the power tool Loose clothes jewellery or long hair can become entangled in the moving parts If there are devices for connecting dust extraction and collection facilities please ensure that they are attac
5. not suitable incompetent usage e g not following the instructions given in the manual inexpert assembly lightning strike erroneus net voltage This list is not exhaustive Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement Devices or parts which are replaced under the warranty therefore remain the property of Varo NV Wereserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained Clean ventilation slots carbon brushes serviced regularly etc Your purchase receipt must be kept as proof of date of purchase Your appliance must be returned undismantled to your dealer in an acceptably clean state in its original blow moulded case if applicable to the unit accompanied by proof of purchase Copyright O 2011 VARO Page 12 www varo com POWERPLUS X POWXQ5250 EN 16 ENVIRONMENT oo Should your appliance need replacement after extended use do not dispose of it SZ with the household refuse but in an environmentally safe way e Waste produced by electrical machine items should not be handled like normal household rubbish Please recycle where recycle facilities exist Check with your ENENENE Local Authority or retailer for recycling advice 16 1 X Battery pack This product contains Li ion To preserv
6. position a i When drilling hard smooth surface use a center punch to mark the desired hole location This will prevent the drill bit from slipping off center as the hole is started Hold the tool firmly and place the tip of the drill or bit into the work piece applying only enough pressure to keep the bit cutting Do not force or apply side pressure to elongate a hole 10 1 Wood drilling For maximum performance use high speed steel bits for wood drilling Turn the torque adjustment ring on the drill to desired torque setting Begin drilling at a very low speed to prevent the bit from slipping off the starting point Increase the speed as the drill bit bites into the material When drilling through holes place a block of wood behind the workpiece to prevent ragged or shintered edges on the back side of the hole 10 2 Metal drilling For maximum performance use high speed steel bits for metal or steel drilling Turn the torque adjustment ring on the drill to desired torque setting Begin drilling at a very low speed to prevent the bit from slipping off the starting point Maintain a speed and pressure which allows cutting without overheating the bit Applying too much pressure will Overheat the drill Wear the bearings Bend or burn bits Produce off center or irregular shaped holes When drilling large holes in metal it is recommended that you drill with a small bit at first then finish with a large bit Also lubricate the bit with oil t
7. temperatures Battery storage Store and charge your batteries in cool area Temperatures below 10 C 50 F or above 38 C 100 F will shorten battery life Never store batteries in discharged condition Recharge them immediately after they are discharged Batteries gradually lose their charge the higher the temperature the quicker so If you store your tool for longer periods of time without using it recharge the batteries every month or two This will prolong battery life 13 TECHNICAL DETAILS Model No POWXQ5250 Chuck 13mm Power supply 18V DC 0 470 0 1700min 1 Input 220 240VAC 50 60Hz 75W Output 20V d c 3 0 A No Load Speed Charger input Charger Rate Battery Pack Model POWXQ5250B Battery Type Li ion Battery capacity 2600mAh Gear Train 2 Speed Clutch 25 2 Positions Charger 1 hour Torque 45 Nm MAX Copyright 2011 VARO Page 11 www varo com POWERPLUS X POWXQ5250 EN 14 SOUND EMISSION Noise emission values measured according to relevant standard Acoustic pressure level LpA 86 dB A K 3 dB A Acoustic power level LwA 97 dB A K 3 dB A ATTENTION The sound power pressure may exceed 85 dB A in this case individual hearing protection must be worn aw Vibration drill 2 43 m s K z 1 5 m s aw Vibration impact drill 6 14 m s K 1 5 m s 15 WARRANTY This product is warranted for a 5 year period effective from the date of purchase by the first user Th
8. NG Do not allow familiarity with the drill make you careless One careless fraction of a second is sufficient to inflict severe injury 9 1 Charging the battery pack The battery pack for this tool is supplied in a low charge condition to prevent possible problems therefore you have to charge the battery before first use Note The battery will not reach full charge after the first charge Allow several cycles drilling followed by recharging for them to become fully charged TO CHARGE The battery should only be used indoors The battery pack will become slightly warm to the touch while charging this is normal and does not indicate a problem Do not place the charger in an area of extreme heat or cold it will work best at normal room temperature When the battery becomes fully charged unplug your charger from the power supply and remove the battery pack from the charger For battery pack the charging time after normal use is about 1 hour to be fully charged 9 2 Charging indication Fig 3 The charger 13 has two LED lights green 14 and red 15 The green light is a power indicator when the charger is plugged in the green one lights Push the battery pack 6 to make sure contacts on battery pack engage properly with contacts in charger When properly connected the green and red light is all light that means the battery is charging When the battery is loaded the green light keeps illumining and the red one is blinked u
9. POWERPLUS POWXQ5250 EN HIGH QUALITY a 0 5B QN 5 3 5 4 5 5 APPLICATION erdt arsimudi dto undc uium cea tinne set sun i teu S seEE Cu eecesedeesens 3 DESCRIPTION FIG 1 2 11 creer rere nnn nnne nnn uua 3 PACKAGE CONTENT LIST erre eere nennen 3 54 19 C 4 GENERAL POWER TOOL SAFETY WARNINGS 4 WOIMING Ql64 m 4 Electrical Safely qm 4 Iz g 10 2 LE 0 18 riie 5 Power tool USe and Cale ien eee io Eee aa oet uiae R 5 cr jq i o 5 ADDITIONAL SAFETY INSTRUCTIONS 5 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGER ee mt 6 hearer ee LI TIC 6 DOCIUICIFeiiudqup 6 Forgueadjustment ring CET uiii saxea sd ona o onus nennen S RRRRR ea ERR USRAR ERU CREE RNRR RM EE DUREE 6 Forward reverse selector right left rotation selector 3 7 Variable SPE P 7 SDECO SCICCION 2 sssaaa E AR 7 PRE OPERATION cccesseccensecceneceenseesenseeceaseecenseseensesenseesenses 7 Charging the battery DacK oon titi eese o tonto esa eue o pau de oye e eI MEE UE MU EIUS 7 Charging indication Fig 3 iesus cs costa barata rugosa ani 7 Install remove battery pack
10. al directly or via accidental contact with metallic objects the 9 battery is short circuited and an intense current will flow causing heat generation which may lead to casing rupture or fire 7 Do not heat If batteries are heated to above 100 C sealing and insulating separators and other polymer components may be damaged resulting in electrolyte leakage and or internal short circuiting leading to heat generation causing rupture or file Moreover do not dispose of the batteries in fire explosion and or intense burning may result 8 Under extreme conditions battery leakage may occur When you notice liquid on the battery proceed as follows Carefully wipe the liquid off using a cloth Avoid skin contact ncase of skin or eye contact follow the instructions below i Immediately rinse with water Neutralize with a mild acid such as lemon juice or vinegar ii In case of eye contact rinse abundantly with clean water for at least 10 minutes Consult a physician Chargers Use the charger provided with the tool only to charge the battery Never attempt to charge non rechargeable batteries Have defective cords replaced immediately Do not expose to water Do not open the charger Do not probe the charger The charger is intended for indoor use only 8 FEATURES 8 1 Keyless chuck 12 Your drill has a keyless chuck that allows you to hand tighten or release drill bit in the chuck jaws UP e oT 8 2 Torque adju
11. e natural resources please recycle or dispose of batteries properly Local state or federal laws may prohibit disposal of Li ion batteries in ordinary trash Consult you local waste authority for information regarding available recycling and or disposal options 17 DECLARATION OF CONFORMITY VARO N V Joseph Van Instraat 9 BE2500 Lier BELGIUM declares that AZ Product Cordless Hammer drill 18V li ion Trade mark POWERplus Model POWXQ5250 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives as they relate to European harmonized standards Any unauthorized modification of the apparatus voids this declaration European Directives including if applicable their amending directives 2004 108 EC The Electromagnetic Compatibility Directive 2006 42 EC The Machinery Directive European harmonized standards and their amendments EN60745 1 2009 EN60745 2 1 2010 EN55014 1 2006 EN55014 2 1997 The undersigned acts on behalf of and under the power of attorney granted by the company management S MEER VM A i 2d Philippe Vankerkhove Certification Manager 17 01 11 Copyright O 2011 VARO Page 13 www varo com
12. er tool taking into account the working conditions and the work which needs to be done Using a power tool in ways for which it was not intended can lead to potentially hazardous situations 5 5 Service Your power tool should be serviced by a qualified specialist using only standard spare parts This will ensure that it meets the required safety standards 6 ADDITIONAL SAFETY INSTRUCTIONS Always wear hearing protection with impact drills Exposure to noise can cause hearing loss Use auxiliary handle s if supplied with the tool Loss of control can cause personal injury Copyright 2011 VARO Page 5 www varo com eo XQ POWXQ5250 EN Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord Cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock 7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS Batteries 1 Never attempt to open for any reason 2 Do not store in locations where the temperature may exceed 40 C 3 Charge only at ambient temperatures between 10 C and 40 C 4 Charge only using the charger provided with the tool 5 When disposing of batteries follow the instructions given in the section Protecting the environment Do not cause short circuits If connection is made between the positive and negative termin
13. hed and used correctly Using such devices can reduce dust related hazards 5 4 Power tool use and care Do not expect the power tool to do more than it can Use the correct power tool for what you want to do A power tool will achieve better results and be safer if used in the context for which it was designed Do not use the power tool if the switch cannot turn it on and off A power tool with a broken switch is dangerous and must be repaired Disconnect the plug from the power source before making adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store power tools when not in use out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it Power tools are potentially dangerous in the hands of untrained users Maintain power tools Check for misalignment or jammed moving parts breakages or any other feature that might affect the operation of the power tool If it is damaged the power tool must be repaired Many accidents are caused by using poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control Use the power tool accessories and cutting tools etc in accordance with these instructions and in the manner intended for the particular type of pow
14. is warranty covers all material or production flaws It does not include defective parts subject to normal wear amp tear such as bearings brushes cables and plugs or accessories such as drills drill bits saw blades etc damage or defects resulting from maltreatment accidents or alterations nor the cost of transportation This warranty covers all material or production flaws excluding batteries chargers defective parts subject to normal wear and tear such as in particular bearings brushes cables plugs Accessories such as drills drill bits saw blades etc also do not fall under this warranty Damage and or defects resulting from inappropriate use also do not fall under the warranty provisions We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool Repairs may only be carried out by an authorised customer service centre for Powerplus tools You can always obtain more information at the number 00 32 3 292 92 90 Any transportation costs shall always be borne by the customer unless agreed otherwise in writing Atthe same time no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload Definitely excluded from the warranty is damage resulting from fluid permeation excessive dust penetration intentional damage on purpose or by gross carelessness inappropriate usage use for purposes for which the device is
15. ld be positioned to the left of the switch for drilling The rotation direction is reversed when the selector is to the right of the switch When the selector is in the center position the switch trigger is locked Fig 6 9 4 3 Variable speed This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure Speed is controlled by the amount of switch trigger depression 9 5 Installing removing bits Fig 7 This drill has a keyless chuck with lock 12 to prevent the bit or drill from loosening Hold the drill s handgrip tight with one hand Turn chuck ring anticlockwise with the other hand until the drill chuck opening is large enough to accept the tool Insert the drill or the screwdriver bit into the drill chuck Turn chuck ring clockwise until the tool is clamped tightly Remove the tool in the opposite way Copyright O 2011 VARO Page 8 www varo com POWERPLUS X J POWXQ5250 EN 9 6 Adjusting the torque Fig 8 The torque is adjusted by rotating the torque setting ring 11 the torque is greater when the torque setting is set on a higher position The torque is less when the torque setting ring is set on a low position 1 denote lowest and M denote highest Torque is set by means of a torque setting according to different screw and different material you can adjust suitable torque if the screw is long and material is hard you can adjust the bigger setting
16. ntil the charger is disconnected from mains power NOTE If both the green and red light of the charger are blinking simultaneously the charger or the battery is defective Copyright 2011 VARO Page 7 www varo com POWERPLUS X POWXQ5250 EN 9 3 Install remove battery pack Fig 4 WARNING Before making any adjustments ensure the drill is switched off with the reversing switch in the centre position Hold the drill with one hand and the battery pack 6 with the other To install pull and slide battery pack 6 into battery port make sure the latch on the back side of the battery snap into place and battery is secure before beginning operation To remove use your thumb and fingers press the battery release latch in and pull the battery pack off at the same time 9 4 Switch Fig 5 The drill is started and stopped by depressing and releasing the switch trigger Release the switch trigger to turn the drill OFF in short time because of electric brake 9 4 1 Switch lock The switch trigger can be locked in the OFF position Fig 6 This helps to reduce the possibility of accidental starting when not in use To lock the switch trigger place the direction of rotation selector in the center position 9 4 2 Direction of rotation The direction of rotation is controlled by the direction of rotation selector located above the switch trigger With the drill held in normal operating position the direction of rotation selector shou
17. o improve drilling action and increase bit life 10 3 Masonry drilling For maximum performance use carbide tipped masonry impact bits when drilling holes in brick tile etc Rotate the torque selector to impact position T Apply light pressure and medium speed for best results in brick When drilling holes in tile practice on a scrap piece to determine the best speed and pressure Copyright 2011 VARO Page 10 www varo com POWXQ5250 EN 11 CLEANING AND MAINTENANCE 11 1 Cleaning Keep the ventilation slots of the tool clean to prevent overheating of the engine Regularly clean the tool housing with a soft cloth preferably after each use Keep the ventilation slots free from dust and dirt If the dirt does not come off use a soft cloth moistened with soapy water Never use solvents such as petrol alcohol ammonia water etc These solvents may damage the plastic parts 11 2 Maintenance Our tools have been designed to operate over a long period of time with a minimum of maintenance Continuous satisfactory operation depends upon proper tool care and regular cleaning 11 3 Connecting cable and mains plug If the connecting cable or mains plug is damaged it must be replaced Replacement of the connecting cable should only be carried out by a qualified specialist qualified electrician 12 STORAGE Store it out of the reach of children in a stable and secure position in a cool and dry place avoid too high and too low
18. or example in the presence of inflammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders at a distance when operating a power tool Distractions can cause you to lose control of it 5 2 Electrical safety Always check that the power supply corresponds to the voltage on the rating plate Power tool plugs must match the outlet Never modify the plug in any way Do not use adapter plugs with earthed power tools Unmodified plugs and matching outlets will reduce the risk of an electric shock Avoid body contact with earthed surfaces such as pipes radiators kitchen ranges and refrigerators There is an increased risk of an electric shock if your body is earthed Do not expose power tools to rain or wet conditions If water gets inside a power tool it will increase the risk of an electric shock Do not damage the cord Never use the cord for carrying pulling or unplugging the power tool Keep the cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of an electric shock When operating a power tool outdoors use an extension cable suitable for outdoor use Using a cord suitable for outdoor use reduces the risk of an electric shock f operating a power tool in a damp location is unavoidable use a power supply protected by a residual current device RCD Using an RCD reduces the risk of an electric shock Copyright
19. sible till the end of the warranty period Dispose it into your local waste disposal system afterwards SoS Mg N oo Nl C2 WARNING Packaging materials are not toys Children must not play with plastic bags Danger of suffocation 1pc machine 1pc charger 2pcs batteries 1pc manual 1pc XQ catalog If any parts are missing or damaged please contact your dealer Copyright O 2011 VARO Page 3 www varo com POWERPLUS X J POWXQ5250 EN 4 SYMBOLS In this manual and or on the machine the following symbols are used Denotes risk of personal injury or damage to the tool Only use indoors Do not expose charger and Read manual before use battery pack to water In accordance with essential requirements of the Do not incinerate battery pack European directive s Class II The machine is double insulated earthing wire is therefore not necessary 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions Failure to heed warnings and follow instructions may result in electric shock fire and or serious injury Keep safety warnings and instructions for future reference The term power tool in the safety warnings refers to your mains operated corded power tool or battery operated cordless power tool 5 1 Working area Keep working area clean and well lit Untidy and dark areas can lead to accidents Do not operate power tools in potentially explosive surroundings f
20. stment ring 11 The drill has a torque adjustment ring It allows you to select the desired torque depending on the task you have to perform drill different types of screws into different materials The proper setting depends on the type of material and the size of screw you are using Copyright 2011 VARO Page 6 www varo com POWERPLUS X J POWXQ5250 EN 8 3 Forward reverse selector right left rotation selector 3 The drill has a forward reverse selector located above the switch trigger Press selector F orward R everse on left side of machine to the right side drill turns left reverse loosen screws Press selector F orward R everse on right side to the left side drill turns right forward fasten screws CAUTION To prevent damage to the gearbox always allow the chuck to come to a complete stop before changing the direction of rotation or selecting another speed HI LO To stop release the trigger switch 8 4 Variable speed Your cordless drill has a variable speed switch The rotational speed and torque will in decrease equivalently to applied trigger pressure This drill has an electric brake when the trigger switch is released the chuck stops turning 8 5 Speed selector 2 Your cordless drill has a two speed gear designed for drilling or driving at LO Low or HI High speed A slide switch is located on top of your drill to select either LO Low or HI High speed 9 PRE OPERATION WARNI
21. t any person or an object other than the work piece Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a person for longer than 0 25s 9 10 Magnetic plate Fig 11 On the bottom side of this drill there is a magnetic drill bit holder This can be used when drilling to hold various sized drill bits to be used while completing the job The magnet can also hold the accessories you may need like some screws bits and drills etc Copyright 2011 VARO Page 9 www varo com POWERPLUS X J POWXQ5250 EN 9 11 Auxiliary handle subassembly Fig 12 The auxiliary handle subassembly will provide additional control support and guidance for the drill The handle is adjustable to any position around the 360 handle collar mount 16 Installing the auxiliary handle subassembly Loosen the collar mount by turning the grip 17 adequately then slide the handle over the handle collar mount on the suitable position of this tool Finally securely tighten the grip NOTE Use auxiliary handle supplied with the tool Loss of control can cause personal injury 9 12 Depth Gauge 1 Your drilling depth can be pre set and or repeated by using the depth gauge Setting depth loosen grip adequately place the straight part of the depth gauge in the hole and slide the depth gauge to desired depth and securely tighten grip again 10 DRILLING Before use for drilling the torque setting should be set on drill
Download Pdf Manuals
Related Search