Powerplus POW30080 power drill
Contents
1. Before performing any work on the equipment pull the power plug 9 1 Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine Regularly clean the machine housing with a soft cloth preferably after each use Keep the ventilation slots free from dust and dirt If the dirt does not come off use a soft cloth moistened with soapy water Never use solvents such as petrol alcohol ammonia water etc These solvents may damage the plastic parts 9 2 Maintenance Our machines have been designed to operate over a long period of time with a minimum of maintenance Continuous satisfactory operation depends upon proper machine care and regular cleaning Copyright 2013 Page 5 www varo com POWERPLUS POW30080 EN 10 TECHNICAL DATA Voltage Frequency 230V 50Hz Input power 1050W Chuck capacity Max 13 mm No load speed 0 2800 min 11 NOISE Noise values measured according to relevant standard K 3 Acoustic pressure level LpA 97 dB A Acoustic power level LwA 108 dB A ATTENTION Wear hearing protection when sound pressure is over 85 dB A aw Vibration 11 37 m s K 1 5 m s 12 STORAGE Thoroughly clean the whole machine and its accessories Store it out of the reach of children in a stable and secure position in a cool and dry place avoid too high and too low temperatures Protect it from exposure to direct sunlight Keep it in the dark if possible Don t ke2. Double insulated European directives Copyright 2013 Page 2 www varo com POWERPLUS POW30080 EN 5 GENERAL POWER TOOL SAFETY WARNING Read all safety warnings and instructions Failure to heed warnings and follow instructions may result in electric shock fire and or serious injury Keep safety warnings and instructions for future reference The term power tool in the safety warnings refers to your mains operated corded power tool or battery operated cordless power tool 5 1 Working area Keep working area clean and well lit Untidy and dark areas can lead to accidents Do not operate power tools in potentially explosive surroundings for example in the presence of inflammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders at a distance when operating a power tool Distractions can cause you to lose control of it 5 2 Electrical safety AN Always check that the power supply corresponds to the voltage on the rating plate Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain
3. The power tool is intended for driving and drilling through wood metal plastics and masonry It is not designed for professional use POW30080 EN instructions carefully before using the appliance Your power tool should e WARNING For your own safety read this manual and the general safety only be given to other users together with these instructions DESCRIPTION FIG A Chuck Depth gauge Drill and impact mode selector ON OFF switch PACKAGE CONTENT LIST Remove all packaging materials Remove remaining packaging and packing inserts if included Check that the package contents are complete Check the appliance the power cord the power plug and all accessories for transportation damage Keep the packaging materials as far as possible until the end of the warranty period Then take it to your local waste disposal system Lock on button Speed control dial Forward reverse lever Auxiliary handle rss RONN SE WARNING Packaging materials are not toys Children must not play with plastic bags There is a danger of suffocation 1 impact drill 1 instruction manual 1 auxiliary handle 1 depth gauge i If any parts are missing or damaged please contact your dealer 4 SYMBOLS In this manual and or on the machine the following symbols are used Warning Danger ri Wear ear protection Read manual before use i Wear eye protection In accordance with essential applicable safety standards of
4. or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock f operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock 5 3 Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool when you are tired or under the influence of drugs alcohol or medication A moment of inattention when operating a power tool may result in serious personal injury Use safety equipment Always wear eye protection Using safety equipment such as a dust mask non skid safety shoes a hard hat or hearing protection whenever it is needed will reduce the risk of personal injury Avoid accidental starts Ensure the switch is in the off position before inserting the plug Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely Do not reach out too far Keep your feet firmly on the ground at all tim
5. tools etc in accordance with these instructions and in the manner intended for the particular type of power tool taking into account the working conditions and the work which needs to be done Using a power tool in ways for which it was not intended can lead to potentially hazardous situations POW30080 EN 5 5 Service Your power tool should be serviced by a qualified specialist using only standard spare parts This will ensure that it meets the required safety standards 6 SPECIFIC SAFETY INSTRUCTIONS Always use the auxiliary handle for maximum control Secure the material being drilled Never hold it in your hand or across legs Unstable support can cause loose of control and injury Do not touch the bit after operation It could be very hot Keep your hand away from under the work piece 7 ASSEMBLY Disconnect the power plug before carrying out any adjustments or maintenance 7 1 Inserting bit or drill Open the chuck 1 Insert the drill or bit in the chuck Tighten the chuck firmly Check if the bit or drill is in the centre of the chuck 7 2 Auxiliary handle The auxiliary handle 8 will provide additional control support and guidance for the drill Slide the holder of the side grip over the drill chuck on the machine Turn the side grip in the required position and tighten it firmly 7 3 Depth gauge The depth stop is used to limited the maximum drilling depth Loosen the side grip 8
6. 0 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives based on the application of European harmonized standards Any unauthorized modification of the apparatus voids this declaration European Directives including if applicable their amendments up to the date of signature 2011 65 EU 2006 42 EC 2004 108 EC European harmonized standards including if applicable their amendments up to the date of signature EN60745 1 2009 EN60745 2 1 2010 EN55014 1 2006 EN55014 2 1997 EN61000 3 2 2006 EN61000 3 3 2008 Keeper of the Technical Documentation Philippe Vankerkhove VARO Vic Van Rompuy N V The undersigned acts on behalf of the company CEO m 7 d d Philippe Vankerkhove Regulatory Affairs Compliance Manager 13 05 2013 Copyright 2013 Page 7 www varo com
7. Insert the depth stop 2 in the hole in the holder of the side grip Adjust the depth stop to the required drilling depth Tighten the side grip firmly Copyright 2013 Page 4 www varo com POWERPLUS 8 OPERATION 8 1 Selecting the operation mode Select the required operating mode before use drilling or hammer drilling For drilling in wood metal plastics and soft stone push the switch 3 to the drill position For drilling in concrete or hard stone push the switch 3 to the hammer position POW30080 EN 8 2 Forward reverse lever To select forward position right rotation push the forward reverse lever to the right R To select the reverse position left rotation push the forward reverse lever to the left L 8 3 Variable speed This tool has a speed control dial 6 that delivers higher speed by turning to the position and delivers lower speed by turning to the position 8 4 Switching ON and OFF Connect the tool to the power supply To start the machine you squeeze the ON OFF switch 4 To stop the machine you release the ON OFF switch 8 5 Continuous mode To switch the machine to continuous mode keep the on off switch pressed and at the same time press the lock on button 5 Subsequently release the on off switch To switch off continuous mode press the on off switch again AN Never put down the machine when using the continuous mode 9 CLEANING AND MAINTENANCE AN
8. POWERPLUS POW30080 EN 1 APPLICA HON WE 2 2 DESCRIPTION bi ale d NEE 2 3 PACKAGE CONTENT LIST ccccssseecesseecssseecenseseeseesenseeseaees 2 4 SCENE 2 5 GENERAL POWER TOOL SAFETY WARNING 0000 3 5 1 tel dee aroa cocoice rres E EEEE EREE 3 5 2 TEE E 3 5 3 Personal Salei sink eee eee eee 3 5 4 Power 100 USC and RE 4 5 5 EE ee d 6 SPECIFIC SAFETY INSTRUCTIONS ccccsssssseeessesssseeeeeeenseees 4 T PAS EID LLY cienne E a 4 7 1 MSIN D Or OFI creeer ss nnanesies 4 7 2 Auxiliary Handle sisisi aii EEA 4 7 3 DEP AUC e E E 4 8 OPERATION ema eee eer ters eee Breet ee ae Ce ene ia tele eee atest nn atae ek ene on 5 8 1 Selecting the operation mode 1 ssccccsssseecccnecnssnssnenseeessnsssnsesenaaannsnsssanaaaasesnsseees 5 8 2 F rward EE 5 8 3 VaNlADIC SPCC DE 5 8 4 SWITCHING ON and OF E 5 8 5 CONNNUOUS MORE xan dennnendieen den a a 5 H CLEANING AND MAINTENANCE 00 cccccsessseeecesseeeeeneeeseees 5 9 1 I RUNING risa tas sd tenis os sis eee S 5 9 2 MAIC ANCE ccscrsnecensasaasasasnarencisaencssuwnatansiusannee svenstenauekunsndvenaicndersuucseumnadanduesuactenenuteds 5 10 TECHNICAL DATA WEE 6 11 NOISE eoa a A eamee rent eee neiia te as ath were 6 12 STORAGE EEN 6 13 WARRANTY EE 6 14 ENVIRONMENT eegener ee T 15 DECLARATION OF CONFORMITY cccecesseeecsseeeseeneeeees T Copyright 2013 Page 1 www varo com POWERPLUS POW30080 IMPACT DRILL 1 APPLICATION
9. ep it in plastic bags to avoid humidity build up 13 WARRANTY e This product is warranted for a 24 month period effective from the date of purchase by the first user e This warranty covers all material or production flaws excluding batteries chargers defective parts subject to normal wear amp tear such as bearings brushes cables and plugs or accessories such as drills drill bits saw blades etc damage or defects resulting from maltreatment accidents or alterations nor the cost of transportation e Damage and or defects resulting from inappropriate use also do not fall under the warranty provisions e We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool e Repairs may only be carried out by an authorised customer service centre for Powerplus tools e You can always obtain more information at the number 00 32 3 292 92 90 e Any transportation costs shall always be borne by the customer unless agreed otherwise in writing e Atthe same time no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload e Definitely excluded from the warranty is damage resulting from fluid permeation excessive dust penetration intentional damage on purpose or by gross carelessness inappropriate usage use for purposes for which the device is not suitable incompetent usage e g not following the instructions given in the manual inexpert a
10. es This will enable you retain control over the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from the power tool Loose clothes jewellery or long hair can become entangled in the moving parts Copyright 2013 Page 3 www varo com POWERPLUS 5 4 Power tool use and care Do not expect the power tool to do more than it can Use the correct power tool for what you want to do A power tool will achieve better results and be safer if used in the context for which it was designed Do not use the power tool if the switch cannot turn it on and off A power tool with a broken switch is dangerous and must be repaired Disconnect the plug from the power source before making adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store power tools when not in use out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it Power tools are potentially dangerous in the hands of untrained users Maintenance Check for misalignment or jammed moving parts breakages or any other feature that might affect the operation of the power tool If it is damaged the power tool must be repaired Many accidents are caused by using poorly maintained power tools Use the power tool accessories and cutting
11. ssembly lightning strike erroneus net voltage This list is not exhaustive e Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement e Devices or parts which are replaced under the warranty therefore remain the property of Varo NV Copyright 2013 Page 6 www varo com POWERPLUS POW30080 EN e We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained Clean ventilation slots carbon brushes serviced regularly etc e Your purchase receipt must be kept as proof of date of purchase Your appliance must be returned undismantled to your dealer in an acceptably clean state in its original blow moulded case if applicable to the unit accompanied by proof of purchase 14 ENVIRONMENT Should your appliance need replacement after extended use do not discard it KE with the household rubbish but dispose of it in an environmentally safe way Cs Waste produced by electrical machine items should not be handled like normal household rubbish Please recycle where recycle facilities exist Check with your EE Local Authority or retailer for recycling advice 15 DECLARATION OF CONFORMITY CE VARO N V Joseph Van Instraat 9 BE2500 Lier BELGIUM declares that product Impact drill trade mark POWERplus model POW3008
Download Pdf Manuals
Related Search