Kramer Electronics VM-2DH video converter
Contents
1. To acquire the EDID Connect the power Connect the output s from which you want to acquire the EDID Press and hold the EDID button to select the desired EDID source The OUTPUT LEDs light in the following cycle HDMI OUT DVI OUT Both LEDS Auto Mix VM 2DH Connecting the VM 2DH i saree Both LEDs flash default 4 Release the button when reaching the desired EDID source The EDID is acquired If you set the machine to acquire the EDID from an output that is not connected the default EDID is acquired VM 2DH Connecting the VM 2DH 5 Technical Specifications INPUT 1 DisplayPort connector OUTPUTS 1 DVI 1 2Vpp on a DVI Molex 24 pin female connector DDC signal 5Vpp TTL 1 HDMI connector STANDARDS COMPLIANCE Supports DVI 1 1 HDCP and HDMI Up to WUXGA 1920x1200 1080p BANDWIDTH 4 95Gbps 1 65Gbps per graphic channel CONTROLS EDID button for selecting and storing EDID information POWER SOURCE 5V DC 800mA OPERATING TEMPERATURE 0 to 40 C 32 to 104 F STORAGE TEMPERATURE 40 to 70 C 40 to 158 F HUMIDITY 10 to 90 RHL non condensing DIMENSIONS 12cm x 7 2cm x 2 4cm 4 7 x 2 8 x 1 0 W D H WEIGHT 0 3kg 0 67lbs approx ACCESSORIES Power supply mounting bracket OPTIONS RK 3T rack adapter Specifications are subject to change without notice at http www kramerelectronics com VM 2DH Technical Specifications LIMITED WARRANTY The wa2. see Section 4 1 sO S lt DVI Projector Display Computer Graphics Source Figure 2 Connecting the VM 2DH DisplayPort to DVI HDMI Converter 6 VM 2DH Connecting the VM 2DH 4 1 Acquiring the EDID Initially the VM 2DH operates with the factory default EDID stored in the non volatile memory The source reads the EDID from the device when the device is plugged in or powered on This is usually done only once when the unit is being set up in an installation Once acquired the EDID is saved in non volatile memory and further acquisition is not necessary The VM 2DH reads the EDID which is stored in the non volatile memory The VM 2DH provides the ability to acquire the EDID from One output the relevant output LED lights Two connected outputs in Auto Mix mode both output LEDs are lit The EDID acquired is a weighted average of all the connected outputs For example if several displays with different resolutions are connected to the outputs the acquired EDID supports all the resolutions as well as other parameters included in the EDID The initial default EDID both output LEDs flash Pressing the EDID button briefly causes the output LEDs to indicate the source of the EDID that was last acquired If the HDMI OUT LED lights the HDMI OUT EDID was stored DVI OUT LED lights the DVI OUT EDID was stored Both OUT LEDs light the Auto Mix EDID was stored Both OUT LEDs flash the default EDID is stored
3. processing algorithm that ensures Plug and Play operation for DVI HDMI systems A DVI I connector which is compatible with all types of DVI cables State of the art line drivers on both outputs to provide a cost effective solution for distributing the TMDS signals used for DVI HDMI 3 1 Defining the VM 2DH DisplayPort to DVI HDMI Converter This section defines the VM 2DH EDID IN OUT Setup DVI HOMI DisplayPort to DVIZHDMI Converter VM 2DH DP IN DVI Out HDMI Out Figure 1 VM 2DH DisplayPort to DVI HDMI Converter Feature Function 1 EDID SETUP Button Press to cycle through the EDID sources and to read the EDID see Section 4 1 2 INLED Lights green when the input is active flashes when the input is not valid 3 Lights green when a DVI acceptor output is 7 5V DC Connect to the 5V DC power adapter center pin positive VM 2DH Overview e 4 Connecting the VM 2DH Always switch off the power to each device before connecting it to your VM 2DH After connecting your VM 2DH connect its power and then switch on the power to each device To connect the VM 2DH as illustrated in the example in Figure 2 1 Connect a computer graphics DisplayPort source to the DP IN connector 2 Connect the DVI OUT connector to the DVI projector 3 Connect the HDMI OUT connector to the plasma display 4 Connect the supplied 5V DC power adapter to the VM 2DH and to the mains electricity 5 Optional acquire the EDID
4. used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Whois Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subsequent purchasers or owners of this product What Kramer Electronics will do Kramer Electronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to
5. 1 Acquiring the EDID 5 Technical Specifications Figures Figure 1 VM 2DH DisplayPort to DVI HDMI Converter Figure 2 Connecting the VM 2DH DisplayPort to DVI HDMI Converter ONO OP ONN Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront video audio presentation and broadcasting professionals on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Routers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Products Congratulations on purchasing your Kramer VM 2DH DisplayPort to DVI HDMI Converter which is ideal for the following typical applications e Multiple screen applications e Rental and staging 2 1 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual user manuals application prog
6. CLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years
7. If itis decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT IN
8. KRAMER ELECTRONICS LTD USER MANUAL MODEL VM 2DH DisplayPort to DVI HDMI Converter P N 2900 300264 Rev 3 VM 2DH Quick Start Guide This guide helps you install and use your product for the first time For more detailed information go to http www kramerelectronics com support product_downloads asp to download the latest manual or scan the QR code on the left Step 1 Check what s in the box d VM 2DH DisplayPort to DVI HDMI Converter A 4 Rubber feet A 1 Power supply 5V DC A 1 Quick Start sheet Step 2 Install the VM 2DH Attach the rubber feet and place on a table or mount the VM 2DH in a rack using an optional RK 3T rack mount Step 3 Connect the inputs and outputs DVI Projector Brese Step 4 Connect the power Connect the 5V DC power adapter to the VM 2DH and plug the adapter into the mains electricity Step 5 Operate the VM 2DH If required acquire the EDID Connect the output s from which you want to acquire the EDID Select the required EDID by pressing and holding the EDID SETUP button to cycle through the options HDMI OUT DVI OUT Auto Mix and default When you reach the desired setup release the EDID SETUP button to acquire the EDID Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 2 2 Recycling Kramer Products 3 Overview 3 1 Defining the VM 2DH DisplayPort to DVI HDMI Converter 4 Connecting the VM 2DH 4
9. g Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at htto www kramerelectronics com support recycling Overview The Kramer VM 2DH is a DisplayPort to DVI HDMI converter and distributor for digital signals that is HDCP High Bandwidth Digital Content Protection compatible Since high resolution DVI signals are very sensitive to cable quality and to PCB layout the VM 2DH uses a uniquely designed PCB which includes all buffering conditioning and amplifying circuitry to provide two high level output signals In particular the VM 2DH features Support for resolutions up to WUXGA including all HDTV formats A maximum data rate of 4 95Gbps 1 65Gbps per graphic channel The DDWG DVI 1 0 standard Support for up to eight embedded audio channels Built in re clocking circuitry that regenerates the DVI HDMI signal so that several units may be cascaded A non volatile read and store memory for the EDID Extended Display Identification Data block from one of the outputs so it can then provide the EDID information to the DisplayPort source even if the display device is not connected A default EDID for fast and efficient connection of the unit EDIDPro Kramer Intelligent EDID Processing W intelligent EDID handling and
10. of satisfaction VM 2DH Technical Specifications For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com KRAMER E mail info kramerel com SAFETY WARNING Disconnect the unit from the power supply before opening and servicing P N 2900 300264 Rev 3
11. rams and to check if firmware Go to http www kramerelectronics com to check for up to date upgrades are available where appropriate Achieving the Best Performance To achieve the best performance e Use only good quality connection cables we recommend Kramer high performance high resolution cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables e Do not secure the cables in tight bundles or roll the slack into tight coils e Avoid interference from neighboring electrical appliances that may adversely influence signal quality e Position your Kramer VM 2DH away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may only be connected to other equipment that is installed inside a building Caution There are no operator serviceable parts inside the unit amp Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing 2 2 Recycling Kramer Products The Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recyclin
12. repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a specific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product
13. rranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons equipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be
Download Pdf Manuals
Related Search