Home

MSI Wind Top AE220-037EU

1. the disc and store it properly Discs required 3 Discs created 3 Please click Next to continue ix S C N NO System Operations Windows 8 9 Check the following box if you want to remove the temporary files Click Fin ish to complete recovery disc creation Burn Recovery Thank you for using Recovery Disc Creation Tool The recovery disc creation has been completed Do you wantto remove the temporary files Wind Top Series System Recovery Important The System Recovery Function is only available on systems bundled with Win dows OS and MSI utilities by default The purposes for using the System Recovery Function may include Restore the system back to the initial status of original manufacturer s default settings When some errors have occurred to the operating system in use m When the operating system is affected by virus and is not able to work normally When you want to install the OS with other built in languages Before using the System Recovery Function please backup the important data saved on your system drive to other storage devices If the following solution fails to recover your system please contact the authorized local distributor or service center for further assistance a S ETT N JI ma System Operations Windows 8 gt Recovering the System with the Recovery Discs This section is meant for users to restore your system with the recovery
2. O Reduced solid waste production through take back policy Wind Top Series m Environmental Policy S The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life pa W Users should contact the local authorized point of collection for recycling and disposing of their end of life products S Visit the MSI website and locate a nearby distributor for further recycling information W Users may also reach us at cso msi com for information regarding proper Disposal Take back Recycling and Disassembly of MSI products Chemical Substances Information In compliance with chemical substances regulations such as the EU REACH Regula tion Regulation EC No 1907 2006 of the European Parliament and the Council MSI provides the information of chemical substances in products at http www msi com html popup csr evmtprtt pcm html Battery Information European Union Batteries battery packs and accumulators should not be disposed of as unsorted household waste Please use the public collection system to return recycle or treat them in compliance with the local regulations be collected separately for recycling or special disposal a Taiwan 9 For better environmental protection waste batteries should he GE tk BI ik California USA The button cell battery may contain perchlorate material and requires special handling when recycled or
3. Wind Top AE220 All in One AIO PC MS AC15 System Preface Contents EA Ax a d COP elei Ee TI ee eee iii Sz e s DIS CNN T iii isi cro MR RR CORRER iii Upgrade and Watan iv Acquisition of Replaceable Parts cccccccccccesseeceseeeeeeeeeeeceseseeeeesaeeeeeesseeeeesaees iv Techical Support VE iv Green Product E iv weil ECH Ee e MET T V Chemical Substances Information La GAAN V Battery ACUNA V El Ern ee Tu RU T T T vi CE EE viii FCC B Radio Frequency Interference Statement AA viii WEEE Statement EE ix BA WT Led Packing e 1 2 System OvervieW P 1 3 System Specifications T T u 1 9 Component Replacement amp Upgrade a 1 11 Getting BR d La CT Ee 21 Satety amp EIER yo cc 2 2 Pleat Weal SUN m 2 3 System Operations Windows 7 3 1 System Booting Setup for the first time 3 2 Network Connection under WINdOWS nennen nnns 3 3 sound Blaster Cinema Optional 0 ntt etr ptt ren rae sis erat ekeg dE deggedee 3 8 On Screen Display OSD aaa te rH EE 3 12 Power MANAGSIMGM E 3 15 System Recovery TOOL usciti ota ni tno tate t ane HR Plan Is e aeteba tun um KEnE ep uti 6s 3 17 System Operations Windows 8 4 1 System Booting Setup for the first me aa 4 2 Networ
4. 4 of master audio volume for their selected audio output device It ranges from 0 to 10096 while bigger percentage indicates larger volume typically Advanced Setting Click on the Menu button to start your advanced setting w Start Sound Blaster Cinema when Windows starts v Visualization Always On Top Settings Restore Default Audio Device Selection software Language Selection Software Update About Sound Blaster Cinema Start Sound Blaster Cinema when Windows starts Check the option if you wish to automatically start Sound Blaster Cinema when Windows starts m Visualization Check this if you wish to have Visualization to be active Always On Top Check this if you wish Sound Blaster Control to be always the top window m Settings Selecting the headphones speakers configuration for playback For an optimized employment of SBX Pro Studio technologies Esp SBX Sur round the appropriate configuration needs to be selected Restore Default To set the current audio device to the default state click on the Restore Default option then click OK on the Windows dialog box de uU KO System Operations Windows 8 Audio Device Selection To select the desired audio output device to apply the SBX Pro Studio effects Click on the Audio Device Selection option and select the desired output device from the drop down list And click OK Software Language Selection
5. Avgusta 2005 proizvodi koji spadaju pod elektronsku i elektri nu opremu ne mogu vi e biti odba eni kao obi an ot pad i proizvo a i ove opreme bi e prinu eni da uzmu natrag ove proizvode na kraju njiho vog uobi ajenog veka trajanja Netherlands Nederlands De richtlijn van de Europese Unie EU met betrekking tot Vervuiling van Electrische en Electronische producten 2002 96 EC die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus Romanian Rom n n baza Directivei Uniunii Europene UE privind Evacuarea Echi pamentului Electric si Electronic Directiva 2002 96 EC care intra n vigoare pe 13 au gust 2005 produsele din categoria echipament electric si electronic nu mai pot fi evacu ate ca de euri municipale iar fabricantii echipamentului electronic vizat vor fi obliga i sa primeasc napoi produsele respective la sf r itul duratei lor de utilizare Portuguese Portugu s De acordo com a Directiva 2002 96 EC de Res duos de Eq uipamentos El ctricos e Electr nicos da Uni o Europeia UE efectiva desde o 13 de Agosto do ano 2005 os produtos de equipamento el ctrico e electr nico n o podem ser descartados como res duo municipal e os fabricantes do equipamento electr nico sujeitos a esta legisla o estar o obligados a recolhar
6. Chapter 4 System Operations Windows 8 This chapter provides you with essential information on system operations All information is subject to change without prior notice al T NG System Operations Windows 8 System Booting Setup for the first time For the first time use you will need to go over the following steps to start using your AlO PC The entire booting setup will take you a while 11 Windows setup starts running Please wait until Windows setup finishes the progress loading Select the language of the operating system and click Next to continue Please read the license terms Check the I accept the license terms for using Windows box and click Accept to continue Select a color and enter the PC name Click Next to continue Please choose a wireless network you intend to join from the provided WLAN list Click Connect to continue You may also click Connect to a wireless network later to set up the wireless network later Enter the password for this network and click Connect to continue By choosing the express settings this PC will occasionally send info to Micro soft to help make things run more smoothly in Windows Click Use express settings to continue Enter your email address as a Microsoft account to sign in to Windows Click Next to continue Enter your Microsoft account password and click Next to continue Enter your phone number and alternate email as the
7. Check if there is a non bootable CD DVD inside the optical disk drive If so re move the CD DVD then restart the computer 2 Check Boot Device Priority settings in the BIOS Setup The system can not be shut down It is best to shut down your computer using the Shut Down icon in the operating sys tem Using other methods including those listed below may result in data failure If the Shut Down procedure does not work choose one of the following steps 1 Press Ctrl Alt Del keys then choose Shut Down 2 Press and hold the power button till the system is off 3 Unplug the power cable from the system My microphone does not work 1 For built in microphone please go to Start gt Control Panel gt Sounds and Audio Devices gt Audio to check if it is muted 2 If you are using an external microphone check that the microphone is plugged into the Microphone jack The Internet connection has problems 1 If you are having a problem connecting to your Internet Service Provider ISP check if the ISP is experiencing technical problems 2 Check the Network settings and connection and make sure the system is properly configured to Internet access 3 The wireless LAN data transfer speed is affected by distance and obstructions be tween devices and access points To maximize the data transfer speed choose the access point closest to your system Wind Top Series System speakers do not work 1 Check the master volum
8. Connect to a hidden network or create a new wireless profile Connect to a workplace Set up a dial up or VPN connection to your workplace Cancel Wind Top Series m 6 Select Broadband PPPoE to connect using DSL or cable that requires a user name and password ct to the Interne How do you want to connect Broadband PPPoE P Connect using DSL or cable that requires a user name and password Show connection options that this computer is not set up to use Cancel 7 Type the information from your Internet Service Provider ISP and click Connect to establish your LAN connection to the Interne Type the information from your Internet service provider ISP User name Name your ISP gave you Password Password your ISP gave you Show characters Remember this password Connection name Broadband Connection C Allow other people to use this connection This option allows anyone with access to this computer to use this connection don t have an ISP e n o E System Operations Windows 8 Wireless LAN 1 Select Settings E on Desktop locate a wireless icon with available net work 2 A list of available WLAN connections pops up Choose a connection from the list Settings Control Panel Personalization Gei Networks PC info Wi Fi FET Network AIOSW AP diobar Ee AIOFAE AP David iPhone RC 3
9. IAEA Sl CHEt SAA EU Al amp l X amp 2002 96 ECOl Q H 3k04 MI7 MALA B S Vest AAI EK S HOH MG 9 SBol Chats oS MAAS 9 doit Ole ASS SF 54910 VAIS ict Vietnam Tieng Viet Theo Hu ng dan cua Li n minh Chau Au EU v Thi t bi dien amp dien tu da qua st dung Hu ng dan 2002 96 EC von d c hi u luc v o ng y 13 8 2005 cac san ph m thu c thi t bi dien v dien t s khong con duoc v t b nhu l r c thai do thi nia v c c nha san xu t thi t bi dien tt tu n th hu ng dan s ph i thu hoi c c san ph m n y v o cudi v ng doi Thai luz matl lasrarinwuearesawnawel tsi CEU OT ENEE wav lannsatind taa 2002 96 EC defin atiaetular iauer uf 13 Souen 2005 nla lara snfisuAnfionithu mlnsorlylvnuaz nmse nen Juluduvanaeia aaa le dinaa Li wae nAnaunsmaldnnsatinddwnaniaaniauluuananAmndsnarnauduula AUAAAIAIT TESTEN Indonesia Bahasa Indonesia Sesuai dengan Regulasi Uni Eropa UE perihal WEEE Limbah Peralatan Listrik dan Elektronik Directive 2002 96 EC yang berlaku sejak 13 2005 produk peralatan listrik dan elektronik tidak lagi dapat dibuang sebagai sampah umum dan pabrik peralatan elektronik diwajibkan untuk mengambil kembali produk terse but pada saat masa pakainya habis Wind Top Series m Serbian Srpski Po Direktivi Evropske unije EU o odbacenoj ekektronskoj i elektri noj opremi Direktiva 2002 96 EC koja stupa na snagu od 13
10. To change into the desired display language of this program Click on the Software Language Selection option Choose the desired language from the drop down list of supported languages And follow the instructions on the screen to complete the change Software Update To update this program Click on the Software Update option And follow the instructions on the screen to complete the update About Sound Blaster Cinema The About Box shows the version number of the Sound Blaster Cinema Application Click on OK on the dialog box to close it Wind Top Series mW On Screen Display OSD The on screen display OSD allows you to tune the viewing options of the moni tor such as brightness contrast positioning language etc Mode Monitor Power System Power Menu Enter Up Volume Up Down Volume Down f ct Press the Menu button to launch the OSD main menu Use the Up and Down buttons to select the desired function menu and press the Menu button to en ter Use the Up and Down buttons to select or tune the values to suit your per sonal preferences After the settings are done press the Mode button to exit Adjusting contrast and brightness Adjusting color MODE Exit MENU Enter MODE Exit MENU Enter System Operations Windows
11. Windows 8 Reset PC The Reset utility will bring the system back to original factory settings 1 Select Settings on Desktop then Change PC settings to enter PC settings main page gt General gt Remove everything and reinstall Windows and click Get started Settings Control Panel P C sett n g S ore B Highlight misspelled words Personalization Activate Windows On PC info Personalize Help Users Add or change input methods keyboard layouts and languages Notifications Search You have 416 GB available See how much space your apps are using View app sizes Share Privacy If your PC isn t running well you can refresh it without losing your photos music H ideos and other personal files Devices e s Get started Ease of Access Sync your settings If you want to recycle your PC or start over completely you HomeGroup settings Get started Windows Update Start up from a device or disc such as a USB drive or DVD change your PC s firmware settings change Windows startup settings or restore Windows from a system image This will restart your PC 2 It will show the changes to be made during the process click Next to continue Reset your PC Here s what will happen All your personal files and apps will be removed Your PC settings will be changed back to their defaults Cancel Wind Top Series mW 3 You will be prompted to choose which drive you want
12. any component of the product if you are not an authorized dealer or service center since it may cause the warranty void It is strongly recommended that you contact the authorized dealer or service center for any upgrade or replace service Acquisition of Replaceable Parts Please be noticed that the acquisition of replaceable parts or compatible ones of the product users purchased in certain countries or territories may be fulfilled by the manu facturer within 5 years at most since the product has been discontinued depending on the official regulations declared at the time Please contact the manufacturer via http support msi com for the detailed information about the acquisition of spare parts Technical Support If a problem arises with your system and no solution can be obtained from the user s manual please contact your place of purchase or local distributor Alternatively please try the following help resources for further guidance S visit the MSI website for technical guide BIOS updates driver updates and other information via http www msi com service download fe Contact our technical staff via http support msi com Green Product Features S Reduced energy consumption during use and stand by Limited use of substances harmful to the environment and health Easily dismantled and recycled O O S Reduced use of natural resources by encouraging recycling S Extended product lifetime through easy upgrades
13. der Europ ischen Union EU Richtlinie ber Elektro und Elektronik Altgerate Richtlinie 2002 96 EG mit Wirkung vom 13 August 2005 d rfen Elektro und Elektronikgeraten nicht mehr als Hausm ll entsorgt werden Der Hersteller verpflichtet sich zur R cknahme solcher Produkte am Ende ihrer Nutzungsdauer Spanish Espanol Bajo la directiva 2002 96 EC de la Uni n Europea en materia de desechos y o equipos electr nicos con fecha de rigor desde el 13 de agosto de 2005 los productos clasificados como el ctricos y equipos electr nicos no pueden ser depos itados en los contenedores habituales de su municipio los fabricantes de equipos elec tr nicos est n obligados a hacerse cargo de dichos productos al termino de su per odo de vida Italian Italiano In base alla Direttiva dell Unione Europea EU sullo Smaltimento dei Materiali Elettrici ed Elettronici Direttiva 2002 96 EC in vigore dal 13 Agosto 2005 prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono pi essere eliminati come rifiuti municipali i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita Russian PycckuA4 B coorBercrTBuM c nupekruBoA EBpone ckoro Cosa EC no npenorBpauleHuto 3arpsiaHeHuMs okpyxxaroujel cpenbl UCNONb3OBaHHbIM NEKTPNYECKNM H 3nekrpoHHbIM o6opynoBaHMeM AupektuBa WEEE 2002 96 EC Bctynatouyen B cuny 13 aBrycra 2005 roga u3genun OTHOCALUIMECA
14. Place your system on a flat and steady surface such as a table or desk Pull the stand open and tilt the monitor To stabilize the system make sure that the stand has been pulled until the mark on its hinge aligns to the edge of the hinge cover Proper positioning helps to reduce your eye strain amp muscle fatigue as well TANI DN ERE x mm i gt gt gt gt gt gt EV Getting Started Connecting the AC Power 1 Assemble the AC DC adapter and the AC power cord 2 Plug the DC end of the adapter to the AIO PC 3 Plug the male end of the AC power cord to the electrical outlet ny OOM a We suggest that you connect the AC DC adapter to your AIO PC first and then connect the AC power cord to the socket outlet for safety concerns Wind Top Series m Powering on the System Press the power button to power on the system E GU I gt H ff a J AY msi Chapter 3 System Operations Windows 7 This chapter provides you with essential information on system operations All information is subject to change without prior notice NG System Operations Windows 7 System Booting Setup for the first time For the first time use you will need to go over the following steps to start usi
15. authorized dealer or service center for any upgrade or replace service misi Chapter 2 Getting Started This chapter provides you with the information on hard ware setup procedures While connecting peripheral devices be careful in holding the devices and use a grounded wrist strap to avoid static electricity NG Getting Started Safety amp Comfort Tips The AIO PC is a portable platform that allows you to work anywhere However choos ing a good workspace is important if you have to work with your PC for a long period of time o o Your work area should have enough illumination Choose the proper desk and chair and adjust their height to fit your posture when operating When sitting on the chair sit straight and keep a good posture Adjust the chair s back if available to support your back comfortably Place you feet flat and naturally on the floor so that your knees and elbows have the proper position about 90 degree when operating Put your hands on the desk naturally to support your wrists Adjust the angle position of the AlO PC to have an optimal view Avoid using your PC in a place where discomfort may occur such as on the bed The AIO PC is an electrical device Please treat it with great care to avoid personal injury S Wind Top Series Hardware Setup Positioning Your System 1
16. drive and click Next to continue Burn Recovery Thank you for using Recovery Disc Creation Tool Please insertthe number 1 blank writable DVD and prepare to proceed the recovery disc creation 3 blank writable DVDs will be required for this operation Please click Next to continue 6 The Windows Disc Image Burner pops up Click Burn to start the burning progress It takes a while to finish the processing t Windows Disc Image Burner Disc image file recovery dvd iso Disc burner Status To start burning the disc image click Burn E 7 Verify disc after burning Windows Disc Image pune NN Disc image file recovery dvd iso Disc burner DVD R Drive E M Status Burning disc image to recordable disc C Verify disc after burning Wind Top Series m 7 On completion of the disc creation click Close to exit and take out the disc Follow the on screen instructions to create all recovery discs e Windows Disc Image Bumer BC Disc image file recovery dvd2 iso Disc burner Status The disc image has been successfully burned to disc Verify disc after burning 8 All recovery discs have been successfully created Please store the discs carefully and click Next to continue Burn Recovery Thank you for using Recovery Disc Creation Tool j The 3 of 3 recovery disc has been successfully created Please remove
17. hole next to the Eject button System monitor does not display anything 1 Check if the system is connected to an electrical outlet and it is turned on 2 The system may be in Standby mode Press any key to activate the Display
18. input switch between PC amp HDMI Menu Enter Button Press this button to view the OSD menu or enter into the submenu EN Co Overview o O O e Up Volume Up Button In Menu mode this button indicates the cursor movement or OSD manual selection in incremental values Out of Menu mode it works as Volume Up button Down Volume Down Button In Menu mode this button indicates the cursor movement or OSD manual selection in decremental values Out of Menu mode it works as Volume Down button USB 3 0 Port The USB 3 0 port is backward compatible with USB 2 0 devices It supports up to 5Gbit s SuperSpeed data transfer rate USB 3 0 Port with MSI Super Charger Technology The USB 3 0 port is backward compatible with USB 2 0 devices It supports up to 5Gbit s SuperSpeed data transfer rate With MSI Super Charger Technology not only does it function as normal USB 3 0 port but it also enables users to charge USB devices even when the system is turned off Us ers will no longer need to power on the system just to charge USB devices Better yet it can reduce the charge time up to 40 making life more efficient than ever Card Reader Drive The built in card reader may support various types of memory cards Power Jack The AC DC adapter converts AC power to DC power for this jack Power supplied through this jack supplies power to the PC To prevent damage to the PC always use the supplied power adapter O
19. network ag Configure a new router or access point Connect to a workplace Set up a dial up or VPN connection to your workplace fig Set up a dial up connection ub Connect to the Internet using a dial up connection 7 Enter information for the wireless network you intend to add and click Next to proceed Network name Security type Choose an option Encryption type Hide characters A new WLAN connection has been made Click Close to exit or select Change connection settings to modify the WLAN settings Change connection settings Open the connection properties so that I can change the settings 3 8 System Operations Windows 7 Sound Blaster Cinema Optional Sound Blaster Cinema improves how you experience stereo and multi channel soundtracks from a variety of sources including DVDs games CDs MP3s and even Blu Ray Powered by the SBX Pro Studio technologies the Sound Blaster Cinema delivers a much more realistic and immersive experience conveniently placed in a central and intuitive console The SBX Pro Studio suite of technologies features SBX Surround SBX Crystalizer SBX Bass SBX Smart Volume SBX Dialog Plus gt Overview and Operation After installing and activating Sound Blaster Cinema you can click on each enhance ment feature name SURROUND CRYSTALIZER BASS DIALOG PLUS or SMART VOLUME to switch in
20. or VPN connection or set up a router or access point E Troubleshoot problems Diagnose and repair network problems or get troubleshooting information Followingly choose Manually connect to a wireless network and click Choose a connection option Connect to the Internet Set up a broadband or dial up connection to the Internet Ew Set up a new netwoi sag Set up a new router Connect to a workplace Set up a dial up or VPN connection to your workplace Co P System Operations Windows 8 6 Enter information for the wireless network you intend to add and click Next to proceed SS Manually connect to a wireless network Enter information for the wireless network you want to add Network name Security type Encryption type Security Key Choose an option Hide characters Cancel 7 Anew WLAN connection has been made Click Close to exit or select Change connection settings to modify the WLAN settings Successfully added gt Change connection settings i Open the connection properties so that I can change the settings Wind Top Series Sound Blaster Cinema Optional Sound Blaster Cinema improves how you experience stereo and multi channel soundtracks from a variety of sources including DVDs games CDs MP3s and even Blu Ray Powered by the SBX Pro Studio technologies the Sound Blaster Cinema delivers
21. security info to keep your account more secure Click Next to finish The system enters the Windows 8 OS Get ready to explore your AIO PC Have fun with it Wind Top Series mW Network Connection under Windows Wired LAN 1 Goto Start Control Panel Programs and Features Power Options Event Viewer System Device Manager Disk Management Computer Management Command Prompt Command Prompt Admin Task Manager i Windows Explorer Search Run Desktop 2 Select View network status and tasks under Network and Internet Control Panel Adjust your computer s settings View by Category v EE System and Security Ke Review your computer s status Save backup copies of your files with File History User Accounts and Family Safety Change account type yi Set up Family Safety for any user Find and fix problems Appearance and Personalization Change the theme Change desktop background Adjust screen resolution Hardware and Sound Clock Language and Region L e Network and Internet M View network status and tasks E Choose homegroup and sharing options View devices and printers Add a language Add a device Change input methods 8 Change date time or number formats P4 Programs a Ease of Access Let Windows suggest settings Optimize visual display Uninstall a program E System Operations Windows 8 3 To establish a new connection select N
22. to have control over the five SBX Pro Studio tech nologies SURROUND provides immersion control to enhance the natural sense of audio depth SURROUND and spaciousness by creating virtual sur round sound channels CRYSTALIZER restores the natural E B dynamic range that is lost when iTunes and MP3 music gets compressed 7 M P ma BASS fills in the missing low frequency tones and gives the extra impact for a better jJ r entertainment experience i SMART VOLUME addresses the problem of abrupt volume level changes during play back and between songs by automatically and continuously measuring volume and intelligently applying gain and attenuation to compensate for those changes DIALOG PLUS enhances the voices in movies for clearer dialog Wind Top Series Click on the circles to turn ON OFF the individual fea o o tures A tick will imply the selected feature is turned ON and vice versa Control Slider The slider will be lighted up and ready for adjustment when the particular enhancement feature is turned on You can drag the slider left or right to the desired level It ranges from 096 to 10096 while bigger percentage indicates larger effect typically Volume Control Mute Click on the Speaker ICON to mute 4 un mute the Master Volume of the selected audio output device Ch Cy m z1 You can drag the slider left or right to the desired level
23. your PC isn t running well you can refresh it without losing your personal files 1 Select Settings E on Desktop then Change PC settings to enter PC settings main page General Refresh your PC without affecting your files and click Get started Autocorrect misspelled words Highlight misspelled words Add or change input methods keyboard layouts and languages You have 416 GB available See how much space your apps are using View app sizes If your PC isn t running well you can refresh it without losing your photos music videos and other personal files Get started If you want to recycle your PC or start over completely you can reset it to its factory settings Get started Start up from a device or disc such as a USB drive or DVD change your PC s firmware settings change Windows startup settings or restore Windows from a system image This will restart your PC 2 It will show the changes which will be made during the process click Next to s Wind Top Series 3 A message indicates that your PC is ready to be refreshed click refresh to start This might take a while Ready to refresh your PC This will take a few minutes and your PC will restart 4 After the refresh process ends you will be back to Windows Start Screen where you can find all default Windows 8 utilities and widgets T m m System Operations
24. 505 RG54GS default KI TD e HTC TITAN X310e8946 Available 13 Unavailable MSI DQA9 ADSL2 Ralink_AP Notifications Power Keyboard alan Belkin N1 03DFAE Change PC settings R800i RCRD Airstation VMAXEDA618 Nicole iPhone Wind Top Series mW 3 To establish a new connection select Network and Sharing Center under Network and Internet in Control Panel gt Control Panel gt Network and Internet gt Control Panel Home A System and Security kb Network and Sharing Center View network status and tasks Connect to a network View network computers and devices Network and Internet m HomeGroup Hardware and Sound Choose homegroup and sharing options Programs e Internet Options User Accounts and Family Safety Appearance and Personalization Clock Language and Region Ease of Access Connect to the Internet Change your homepage Manage browser add ons Delete browsing history and cookies Select Set up a new connection or network X Control Panel gt Network and Internet gt Network and Sharing Center Control Panel Home Change adapter settings Change advanced sharing settings Next to continue Change your networking settings View your basic network information and set up connections View your active networks You are currently not connected to any networks RU Set up a new connection or network Set up a broadband dial up
25. 8 Adjusting phase focus amp clock pitch MODE Exit MENU Enter Adjusting signal source MODE Exit MENU Enter HDMI in Specifying language MODE Exit Deutsch Espa ol Ess Frangais Italiano Peewee Adjusting screen position ARTT 1297 ps Di AINA TANA MODE Exit MENU Enter Adjusting OSD position amp timeout Rz m UMP eT aMa EE j 3 MODE Exit MENU Enter MODE Exit MENU Enter Game Cinematic Wind Top Series mW Resetting system Adjusting wide screen mode eT LESER EIERE TP D HECK MODE Exit MENU Enter MODE Exit MENU Enter Wide Mode 2 Press the Up amp Down buttons to adjust the system volume 3 Press the Mode button to view the signal source Press it again to select PC HDMI monitor off mode Whenever any error takes place and incurs abnormal display or volume malfunc tion enter the OSD menu and reset your monitor to restore all settings to manufac turer default for optimal performance Moon System Operations Windows 8 Power Management Power management of personal computers PCs and monitors has the poten tial to save significant amounts of electricity as well as deliver environmental benefits To be energy efficient turn off your display or set your PC to sleep mode after a period of user inactivity Power Management in Windows OS Power Options in Windows OS allow you to c
26. CNNOATALMOHHUA UM nepuop Croatian Hrvatski U okviru Direktive Europske Unije EU o Otpadnim elektri nim i elektronickim uredajima Direktiva 2002 96 EC koja je na snazi od 13 kolovoza 2005 elektri ni i elektroni ki ure aji se ne smiju vi e bacati zajedno s ku nim otpadom i proizvo a i su obvezni zbrinuti takve proizvode na kraju njihovog ivotnog vijeka Estonia Eesti Vastavalt Euroopa Liidu EL direktiivile 2002 96 EU elektri ja elek troonikaseadmete j tmete kohta mis j ustus 13 augustil 2005 on keelatud kodumaja pidamiste elektri ja elektroonikaseadmete j tmete h vitamine koos majapidamisj t metega ja elektri ja elektroonikaseadmete tootjad on kohustatud sellised tooted p rast nende kasutuselt k rvaldamist tagasi v tma 4 Persian 35 Sig g Ss I cle ANG 5 as o gli Geb 42002 96 EC bs LS pi ANS coul el ald sade 2005 She cua SI 13 i5 AS Lgl enisi L ues NG pao Yg GUL oes 3 48 OY man A ysl kaa Aa Gb ga onus al gi VS Ax 21 Arabic 2002 96 EC gt s xSJlg Asi PSI 8o Vl 9 Glam olla o au ugil sS VI syl ai ell sil waksl Jl s SU oo V auol Aal eg p l kmo ol 2005 wl pubuel 13 99 Uordodl Su eol sil ayeVl csocoU Ap Wo Ho Gulpi 99 SLA oia kio slap pple Ll US ais iV claseoJl garing wll lp ay Lic Chapter 1 Overview This system is integrated in design selecting a stylish appearance with a mirror screen which d
27. Install to continue 12 The software is being installed Please do not turn off the computer when software installation is running When the progress bar completes loading click Finish to continue 13 The system enters the Windows 7 OS to start its personalized settings Get ready to explore your AIO PC after the personalized settings are done Have fun with it Wind Top Series mW Network Connection under Windows gt Wired LAN 1 Go to Start gt Control Panel QR Snipping Tool Ki Magnifier i Solitaire Calibration e msi Wind Match gt All Programs Documents Pictures Music Games Computer i Devices and Printers Default Programs Help and Support 2 Select Connect to the Internet under Network and Internet a Control Panel gt Search Control Panel p Adjust your computer s settings System and Security Review your computer s status Back up your computer Find and fix problems Network and Internet Connectto the Internet View network status and tasks Choose homegroup and sharing options Hardware and Sound View devices and printers Add a device Programs Uninstall a program View by Category Y User Accounts and Family Safety Add or remove user accounts dy Set up parental controls for any user Appearance and Personalization Change the theme Change desktop background Adjust screen resolution Clock Language and Region Change keybo
28. K SNEKTPUYECKOMY N NEKTPOHHOMY o6opyAoBaHnio He MOryT paccMaTpUBaTbCA Kak ObITOBOU MyCODp 103TOMy ripou3BonMTern BbBllLIenepeudcneHHOoro 3nekrpoHHOrO o60opynoBaHMs oba3aHbi npuHaMMaTb ero ANA nepepa6orku no okoHuaHMM cpoxka CInyx6bl Turkish T rk e Avrupa Birli i AB Kararnamesi Elektrik ve Elektronik Malzeme At 2002 96 EC Kararnamesi alt nda 13 A ustos 2005 tarihinden itibaren ge erli olmak zere elektrikli ve elektronik malzemeler di er at klar gibi pe at lamayacak ve bu elektonik cihazlar n reticileri cihazlar n kullan m s releri bittikten sonra r nleri geri toplamakla y k ml olacakt r Greek EAAnvik Zougang pe Tnv O ny a 2002 96 EK tns Eupwra khs Evwons EE Trepi ATTOppiyng HAekrpikoU Kal H ektpoviko Ego No Joou WEEE n omoia AauBavel vu TIG 13 Auyouotou 2005 Ta mrpoi vra KNAEKTPIKOU KAI NAEKTPOVIKOU EOT IOO dev eivai uvaT v va ATTOPPIPBOUV TTAEOV WG KOIVA arropp ppara KAI OI KATAOKEUQAOT KEKA Up VOU NAEKTPOVIKOU EEOTTAIOWOU eivai UTTOXPEWHEVO Va TTAPOUV Triow AUT TA Trpol vra OTO TEAOG TNG WO AING Gun roug Preface Polish Polski Zgodnie z Dyrektywa Unii Europejskiej UE dotyczaca odpad w produk tow elektrycznych i elektronicznych Dyrektywa 2002 96 EC kt ra wchodzi w zycie 13 sierpnia 2005 tzw produkty oraz wyposa enie elektryczne i elektroniczne nie mog by traktowane jako mieci komunalne tak wi c producenci tych pr
29. RT VOLUME addresses the problem of abrupt volume level changes during play back and between songs by automatically and continuously measuring volume and intelligently applying gain and attenuation to compensate for those changes DIALOG PLUS enhances the voices in movies for clearer dialog System Operations Windows 7 Click on the circles to turn ON OFF the individual o o features A tick will imply the selected feature is turned ON and vice versa Control Slider The slider will be lighted up and ready for adjustment when the particular enhancement feature is turned on You can drag the slider left or right to the desired level It ranges from 0 to 100 while bigger percentage indicates larger effect typically Volume Control Mute Click on the Speaker ICON to mute 8 un mute the Master Volume of the selected audio output device Ch Cc z1 You can drag the slider left or right to the desired level of master audio volume for their selected audio output device It ranges from 0 to 100 while bigger percentage indicates larger volume typically Advanced Setting Click on the Menu button to start your advanced setting w Start Sound Blaster Cinema when Windows starts v Visualization Always On Top Settings Restore Default Audio Device Selection software Language Selection Software Update About Sound Blaster Cinema Start Sound Blaster Cinema when Windows starts Ch
30. a much more realistic and immersive experience conveniently placed in a central and intuitive console The SBX Pro Studio suite of technologies features SBX Surround SBX Crystalizer SBX Bass SBX Smart Volume SBX Dialog Plus gt Overview and Operation After installing and activating Sound Blaster Cinema you can click on each enhance ment feature name SURROUND CRYSTALIZER BASS DIALOG PLUS or SMART VOLUME to switch into particular feature view for necessary setting controls Advanced Setting Sound YY BLASTER CINEMA il Music e l User Profile SBX Pro Studio Master SBX PRO STUDIO ON OFF SURROUNDS Feature Title KH jJ Control Slider Feature Toggle Volume Control Mute Ix m System Operations Windows 8 Tool Tip When you hover the mouse cursor over a button slider or feature name on the panel a tooltip will show describing the particular function of that item Adjust the loudness of your audio playback automatically to minimize sudden volume changes Users Profile Drop down list provides three different profiles 1 Music Listening 2 Movies Watching 3 Games Playing A custom profile is available for you to customize the profile It will be automatically saved once application has exit SBX Pro Studio Master ON OFF Click on the Master ON OFF button to experience the full effect of SBX Pro Studio Feature Toggle Click on the individual feature toggle
31. agement of your system power Ea Shut down Ze Network Restart Jnavailable b Power Keyboard Change PC settings Power Management through ENERGY STAR qualified monitors Optional The power management feature allows the computer to initiate a low power or Sleep mode after a period of user inactivity When used with an external ENER GY STAR qualified monitor this feature also supports similar power management features of the monitor To take advantage of these potential energy savings the power management feature has been preset to behave in the following ways when the system is operating on AC power Turn off the display after 15 minutes Initiate Sleep after 30 minutes Waking the System Up The computer shall be able to wake up from power saving mode in response to a command from any of the following m the power button m the network Wake On LAN m the mouse m the keyboard e Energy Saving Tips Turn off the monitor by pressing the LCD power button after a period of user inactivity Tune the settings in Power Options under Windows OS to optimize your PC s power management Install power saving software to manage your PC s energy consumption Always disconnect the AC power cord or switch the wall socket off if your PC would be left unused for a certain time to achieve zero energy consumption ma System Operations Windows 8 Creating System Recovery Disc For the first time u
32. and fix problems Network and Internet Connect to the Internet View network status and tasks Choose homegroup and sharing options Hardware and Sound View devices and printers Add a device Programs Uninstall a program a Ag c Documents Pictures Music Games Computer Lm Devices and Printers Default Programs Help and Support Shutdown os e Search Control Panel D View by Category Y User Accounts and Family Safety Se Add or remove user accounts E Set up parental controls for any user Appearance and Personalization Change the theme Change desktop background Adjust screen resolution Clock Language and Region Change keyboards or other input methods Change display language Ease of Access Let Windows suggest settings Optimize visual display E System Operations Windows 7 3 Select Wireless to connect using a wireless router or a wireless network How do you want to connect E Wireless e Connect using a wireless router or a wireless network Broadband PPPoE Connect using DSL or cable that requires a user name and password Show connection options that this computer is not set up to use Help me choose 4 Alist of available WLAN connections pops up Choose a connection from the list or click Open Network and Sharing Center to establish a new connection Not connected Fil Connections are available Wireless Network Connect
33. ards or other input methods Change display language Ease of Access Let Windows suggest settings Optimize visual display E P System Operations Windows 7 3 Select Broadband PPPoE to connect using DSL or cable that requires a user name and password How do you want to connect Wirel E ireless Connect using a wireless router or a wireless network Broadband PPPoE ng Connect using DSL or cable that requires a user name and password Show connection options that this computer is not set up to use Help me choose 4 Type the information from your Internet Service Provider ISP and click Connect to establish your LAN connection Type the information from your Internet service provider ISP User name Name your ISP gave you Password Password your ISP gave you Show characters Remember this password Connection name Broadband Connection Allow other people to use this connection This option allows anyone with access to this computer to use this connection Idon t have an ISP connect Cancel Wind Top Series mW Wireless LAN 1 Go to Start gt Control Panel gi a Sticky Notes Q Snipping Tool E Magnifier d Solitaire Calibration e msi Wind Match gt All Programs 5g Control Panel gt Adjust your computer s settings System and Security Review your computer s status Back up your computer Find
34. ce Use a device UEFI TSSTcorp o CDDVDW SN 208AB UEFI Built in EFI Shell 5 Press any key to reconfirm the selection when the following message ap pears Press any key to boot from CD or DVD 6 The Windows OS starts loading files Windows is loading files 7 The system recovery menu pops up Hard Disk Recovery will format the whole HDD All data on the HDD will be erased while all settings will be restored to manufacturer default Select Hard Disk Recovery only when your HDD is infected with fatal viruses and no solution can be found except a Clear cleanup of the HDD System Partition Recovery fep E ST A Bee o eee The whole hard disk will be formatted All the data will be defragmented and restored to factory default settings BIR m System Operations Windows 8 System Partition Recovery will format the C drive only Only the C drive will be restored to manufacturer default Other drives will not be affected It is highly recommended that users select System Partition Recovery to restore the system Only OS_Install drive will be formatted Other drives will not be affected OS Install drive will be restored to factory default settings 8 The system recovery will format your HDD partition Make sure that the important data have been backed up Click YES to continue click NO to stop the system recovery 4 26 Please sure to continue again Wi
35. d stable surface Cable Routing Hole Route the cables through the cable routing hole to avoid cable spaghetti when connect ing devices TV Tuner Antenna Connector Optional This connector is provided for digital TV tuner antenna HDMI Out Port Optional Ho mr HIGH DEFINITION MULTIMEDIA INTERFACE The High Definition Multimedia Interface HDMI is an all digital audio video interface capable of transmitting uncompressed streams HDMI supports all TV format includ ing standard enhanced or high definition video plus multi channel digital audio on a single cable Serial Port Optional The serial port supports barcode scanners barcode printers bill printers credit card machine etc USB 2 0 Port The USB Universal Serial Bus port is for attaching USB devices such as keyboard mouse or other USB compatible devices It supports up to 480Mbit s Hi Speed data transfer rate dba I er Overview RJ 45 LAN Jack The standard RJ 45 LAN jack is provided for connection to the Local Area Network LAN You can connect a network cable to it Yellow Green Orange UI LED Color LED State Condition Left Yellow Off LAN link is not established On steady state LAN link is established On brighter amp pulsing The computer is communicating with another computer on the LAN Right Green Off 10 Mbit sec data rate is selected On 100 Mbit sec data rate is selected Oran
36. discs that you created beforehand Follow the instructions below to continue 1 Insert the recovery disc into the optical disc drive 2 Select Settings on Desktop then Change PC settings to enter PC settings main page gt General gt Advanced startup and click Restart now to restart the system Settings PC settings mr On Highlight misspelled words Personalization Activate Windows On PC info Personalize Help Users Add or change input methods keyboard layouts and languages Notifications Search Share Privacy your PC isn t running well you can refresh it without losing your photos music videos and other personal files Devices Ease of Access KI Dh Available 13 Unavailable Sync your settings int to recycle your PC or start over completely you can reset it to its factory HomeGroup di ENG Notifications Power Keyboard l l l l 1 AL l l I Windows Update l Change PC settings Me uch as a USB drive or DVD d hanga your PC s in lows startup settings or restore Windows from a sys your P 3 After booting up following screen will pop up select the Use a device to continue Choose an option Continue Turn off your PC 5 Exit and continue to Windows 8 O Use a device Use a USB drive network connection or Windows recovery DVD Troubleshoot Refresh or reset your PC or use advanced tools Wind Top Series m 4 Select recovery disc the boot devi
37. disposed of in California For further information please visit http www dtsc ca gov hazardouswaste perchlorate Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Preface Safety Instructions Read the safety instructions carefully and thoroughly All cautions and warnings on the equipment or user s manual should be noted Keep the User s Guide that comes with the package for future reference Keep this equipment away from humidity and high temperature Lay this equipment on a reliable flat surface before setting it up S Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100 240V before connecting the equipment to the power outlet Do not disable the protective earth pin from the plug The equipment must be connected to an earthed mains socket outlet Always unplug the AC power cord before installing any add on card or module to the equipment Always disconnect the AC power cord or switch the wall socket off if the equipment would be left unused for a certain time to achieve zero energy consumption M n SLU A a Wi H r w i 5355 OU Ww The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating Do not cover the ventilator Do not leave the equipment in an unconditioned env
38. e button to view the signal source Press it again to select PC HDMI Hi monitor off mode Whenever any error takes place and incurs abnormal display or volume malfunction enter the OSD menu and reset your monitor to restore all settings to manufacturer default for optimal performance At aR Prier HISZ Dr BEIER EIS SERIES MODE Exit MENU Enter Wind Top Series mW Power Management Power management of personal computers PCs and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits To be energy efficient turn off your display or set your PC to sleep mode after a period of user inactivity Power Management in Windows OS Power Options in Windows OS allow you to control the power management features of your display hard drive and battery Go to Start gt Control Panel gt System and Security a Control Panel Adjust your computer s settings i System and Security b 4 Review your computer s status Back up your computer Find and fix problems Then click on the Power Options link Power Options Require a password when the computer wakes Change what the power buttons do Change when the computer sleeps Select a power plan that suits your personal needs You may also fine tune the settings by clicking Change plan settings Select a power plan Power plans can help you maximize your computer s performance or conse
39. e setting in the Audio Mixer 2 If you are using an application that has its own volume control check if the volume is muted 3 If you have connected an audio cable to the Headphone jack disconnect it 4 If the system has OSD function please adjust the volume of OSD cannot play a CD DVD with the DVD ROM of the system 1 Make sure the label of the CD DVD is facing up 2 If the CD DVD requires software make sure the software is well installed accord ing to the program instructions 3 If a region code warning appears when you play the DVD the problem could be that the DVD is incompatible with the DVD ROM in your system The region code is listed on the disc packaging 4 If you see video but cannot hear audio check the media player Also make sure the speakers and the master volume setting in the Audio Mixer are not muted 5 Check if the drivers are installed properly Click Start gt Control Panel gt System gt Device Manager 6 A dirty or scratched disc may cause the computer to hang when it is trying to read the disc If necessary reboot the computer remove the disc and check if it is dirty or scratched 7 Please use DVD player software like PowerDVD or WinDVD to play DVD video My DVD ROM drive tray does not open 1 Make sure the computer is turned on 2 Press the Eject button on the DVD ROM drive 3 If the Eject button does not work open the tray by inserting a sharp pointed object into the
40. eck the option if you wish to automatically start Sound Blaster Cinema when Windows starts m Visualization Check this if you wish to have Visualization to be active Always On Top Check this if you wish Sound Blaster Control to be always the top window Settings Selecting the headphones speakers configuration for playback For an optimized employment of SBX Pro Studio technologies Esp SBX Sur round the appropriate configuration needs to be selected Restore Default To set the current audio device to the default state click on the Restore Default option then click OK on the Windows dialog box Wind Top Series Audio Device Selection To select the desired audio output device to apply the SBX Pro Studio effects Click on the Audio Device Selection option and select the desired output device from the drop down list And click OK Software Language Selection To change into the desired display language of this program Click on the Software Language Selection option Choose the desired language from the drop down list of supported languages And follow the instructions on the screen to complete the change Software Update To update this program Click on the Software Update option And follow the instructions on the screen to complete the update About Sound Blaster Cinema The About Box shows the version number of the Sound Blaster Cinema Application Click on OK on the dialog b
41. em Estimated size of the image file 2 56G Disk space 1 68G BACKUP cancel i Subsequent Backups Subsequent backups will replace the previous backup files msi REcovery Foor E 5 Backup System EF L Estimated size of the image file 2 56G Disk space 1 68G Previous backup time 2011 10 10 09 32 02 BACKUP CANCEL EV System Operations Windows 7 3 The system backup is in progress Please note that it may take a while Do not switch off the power or it may cause unknown damage to the system msi REcovery Ton 1 e KI Backup System Ce CANCEL 4 Alternatively select CANCEL to stop the system backup immediately Please do not switch off the power while the system backup cancellation is in progress W4 REcovery Ton 3 20 5 Backup System EJ m Wind Top Series m 5 The following message indicates a successful system backup Press OK to finish 4 fiecnvery TOOL CANCEL System Restore This tool helps to return the system to a previous state with the backup files that users created and saved in the hard disk drive beforehand If no backup files are available the system will be restored to the default setup Follow the instructions below to continue 3 21 1 Select Restore System to enter Alternatively select X or press Esc on the key LL board to exit PAS REcovery Ton pra Pala 1 apa b H OY ER E to select ENTER to confi
42. estes produtos ao finalizar sua vida til Swedish Svenska Under Europeiska unionens EU Weee direktiv Waste Electrical and Electronic Equipment Direktiv 2002 96 EC vilket tr dde i kraft 13 augusti 2005 kan inte produkter fr n elektriska och elektroniska utrustningar kastas i den vanliga hush llssoporna l ngre och tillverkare av inbyggd elektronisk utrustning kommer att tvingas att ta tillbaka s dan produkter n r de r f rbrukade Finnish Suomi Euroopan unionin EU 13 8 2005 voimaan tulleen s hk ja elektroniik kalaiteromua koskevan direktiivin 2002 96 EY mukaisesti s hk ja elektroniikkalaitteita ei saa en h vitt talousj tteiden mukana Direktiivin alaisen s hk tai elektroniikkalait teen valmistajan on otettava laitteet takaisin niiden k ytt i n p ttyess Slovak Sloven ina Na z klade smernice Eur pskej nie EU o elektrick ch a elek tronick ch zariadeniach slo 2002 96 ES ktor vst pila do platnosti 13 augusta 2005 v robky ktor mi s elektrick a elektronick zariadenia nesm by zne kod ovan spolu s komun lnym odpadom a v robcovia patri n ch elektronick ch zariaden s povinn tak to v robky na konci ivotnosti prevzia nasp Slovenian Sloven ina Skladno z dolo ili direktive Evropske unije EU o odpadni elektri ni in elektronski opremi Direktiva 2002 96 ES ki je veljavna od 13 avgusta
43. etwork and Sharing Center gt Control Panel Network and Internet gt Control Panel Home amp Network and Sharing Center E View network status and tasks Connect to a network View network computers and devices System and Security Network and Internet A HomeGroup Choose homegroup and sharing options Hardware and Sound CERS CR Internet Options User Accounts and Family Connect to the Internet Change your homepage Manage browser add ons Safety Delete browsing history and cookies Appearance and Personalization Clock Language and Region Ease of Access 4 Select Set up a new connection or network i gt Control Panel gt Network and Internet gt Network and Sharing Center View your basic network information and set up connections Control Panel Home Change adapter settings View your active networks You are currently not connected to any networks Change advanced sharing settings Change your networking settings i Set up a new connection or network ef Set up a broadband dial up or VPN connection or set up a router or access point Es Troubleshoot problems Diagnose and repair network problems or get troubleshooting information 5 Choose Connect to the Internet the Internet band or dial up connection to the Internet Aau Set up a new network cag Set up a new router or access point A Manually connect to a wireless network sag
44. ge On 1000 Mbit sec data rate is selected This connector is provided for microphones Line Out Jack This connector is provided for headphones or speakers 10 Microphone Jack D Important High speed devices are recommended for USB 3 0 ports whereas low speed devices such as mouse or keyboard are suggested to be plugged into the USB 2 0 ports on the rear panel Wind Top Series Side View o O Go O OQ e L n M Ml LA System Power LED The power LED glows when the system is turned on and goes off when the system is shut down In terms of power saving the LED blinks in S3 Suspend to RAM mode and goes off in S4 Suspend to Disk mode Monitor Power LED The power LED glows when the monitor is turned on and goes off when the monitor is shut down Hard Disk Drive LED This indicator shows the activity status of the HDD It flashes when the system is ac cessing data on the HDD and remains off when no disk activity is detected System Power Button Press the system power button to turn the system on or off Monitor Power Mode Button This button works both as the monitor power button and as the signal
45. ion WR741ND HP ADSL TEST HP ADSL N HP lablib EllieElvin HP ADSL G 3601 5 To establish a new WLAN connection select Set up a new connection or network in Network and Sharing Center en oS SS SIRE Control Panel Network and Internet Network and Sharing Center 2 47 Search Control Pan Control Panel Home S s s View your basic network information and set up connections Manage wireless networks A x b See full map Change adapter settings MSI MSI Internet Change advanced sharing This computer settings View your active networks Connect to a network You are currently not connected to any networks Set up a new connection or network Set up a wireless broadband dial up ad hoc or VPN connection or set up a router or access point Ex Connect to a network Connect or reconnect to a wireless wired dial up or VPN network connection Choose homegroup and sharing options Access files and printers located on other network computers or change sharing settings KA Troubleshoot problems Diagnose and repair network problems or get troubleshooting information See also HomeGroup Internet Options Windows Firewall Wind Top Series mW 6 Followingly choose Manually connect to a wireless network and click Next to continue Choose a connection option Connect to the Internet Set up a wireless broadband or dial up connection to the Internet E Set up a new
46. ironment with a stor age temperature above 60 C 140 F or below 09C 32 F which may damage the equipment NOTE The maximum operating temperature is around 40 C Wind Top Series Never pour any liquid into the opening that could damage or cause electri cal shock Place the power cord in a way that people are unlikely to step on it Do not place anything on the power cord When installing the coaxial cable to the TV Tuner it is necessary to en sure that the metal shield is reliably connected to protective earthing sys tem of the building Cable distribution system should be grounded earthed in accordance with ANSI NFPA 70 the National Electrical Code NEC in particular Sec tion 820 93 Grounding of Outer Conductive Shield of a Coaxial Cable Always keep the strong magnetic or electrical objects away from the equipment If any of the following situations arises get the equipment checked by service personnel S The power cord or plug is damaged Liquid has penetrated into the equipment The equipment has been exposed to moisture The equipment does not work well or you can not get it work accord ing to user s manual The equipment has dropped and damaged E The equipment has obvious sign of breakage The optical storage devices are classified as CLASS 1 LASER PRODUCT Use of controls or adjustments or performance of procedures other than those specified is prohib
47. isplays the sim plicity of modern individualism and the comfort of home With a touchscreen display flawless audio video capa bilities and intuitive user interface it blends technology with life making computers easier and more fun to use suitable for the whole family KN Overview Packing Contents Wind Top Series AC Power Cord msi User Manual LCD Display Wiper Driver Utility Disk amp Quick Guide Keyboard Optional Mouse Optional Stylus Optional Please contact us immediately if any of the items is damaged or missing The illustrations are for reference only and your packing contents may slightly vary depending on the model you purchased Wind Top Series System Overview gt Front View E O O 8 G WG LLL Microphone The built in microphone can be used for video chatting online Webcam The built in webcam with the microphone can be used for picture taking video recoding online conferencing and any other interactive applications LED Indicator Optional The LED indicator indicates when it is recording The LED indicator should be on when device is capturing video and off when the device is not capturing video Display The 21 5 inch Full HD display is with an optimal resolution of 1920 x 1080 pixels and standard proportion of 16 9
48. ited Do not touch the lens inside the drive vill Preface CE Conformity Hereby Micro Star International CO LTD declares that this device is in compliance with the essential safety requirements and other relevant pro visions set out in the European Directive FCC B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the measures listed below M Reorient or relocate the receiving antenna M Increase the separation between the equipment and receiver B Connect the equipment into an outlet on a circuit different from that to which the receiver is connected M Consult the dealer or an experienced radio television technician for help Notice 1 The changes or modifications
49. izdel kov elektri ne in elektronske opreme ni dovoljeno odstranjevati kot obi ajne komunalne odpadke proizvajalci zadevne elektronske opreme pa so zavezani da tovrstne izdelke na koncu njihove ivljenjske dobe sprejmejo nazaj Danish Dansk henhold til direktiv fra den europ iske union EU vedr rende elektrisk og elektronisk affald Direktiv 2002 96 EC som tr der i kraft den 13 august 2005 m produkter som elektrisk og elektronisk udstyr ikke mere bortskaffes som kommunalt af fald Producenter af det p g ldende elektroniske udstyr vil v re forpligtet til at tage disse produkter tilbage ved afslutningen p produkternes levetid xii H Preface Norwegian Norsk Under den europeiske unionens EU direktiv om deponering av elektronisk og elektrisk utstyr direktiv 2002 96 EC som trer i effekt 13 august 2005 kan ikke produkter av elektronisk og elektrisk ustyr lenger deponeres som husholdningsavfall og fabrikantene av disse produktene er forpliktet ta tilbake slike produkter ved slutten av produktets levetid Bulgarian 6bnrapcKu Cnopen nupekruBara Ha EBponelmck va CbI03 OTHOCHO OT ag bli nTE OT enekrpuuecko n enekrpoHHOo o6opynBaHe AnpektuBa 2002 96 EC Baxauja oT 13 aBrycr 2005 r enekrpuuecko n enekrpoHHo o6opynBaHe He Moxe Aa ce U3XBLPNA 3aenHo c 6NT0BNTE ornagmeun n npou3Bonurenure Ha TakoBa OOOpyABaHe Ca 3agbNXKeEHn na npuemat o6parHo CbOTBETHUTE rponykrM B kpaa Ha EK
50. k Connection under WINdOWS nnne nns 4 3 Sound Blaster Cinema Optional EE 4 9 On Screen Display OSD RA ANAN 4 13 Power Management esisiini naro m 4 16 Creating System Recovery Disc 4 18 MV SIEM IRECOVENY E 4 23 A Troubleshooting ssssssunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn AL Wind Top Series Copyright Notice The material in this document is the intellectual property of MICRO STAR INTERNA TIONAL We take every care in the preparation of this document but no guarantee is given as to the correctness of its contents Our products are under continual improve ment and we reserve the right to make changes without notice Trademarks All trademarks are the properties of their respective owners MSI is a registered trademark of Micro Star Int l Co Ltd M Intel is a registered trademark of Intel Corporation M Windows is a registered trademark of Microsoft Corporation M Realtek is a registered trademark of Realtek Semiconductor Corporation M Sound Blaster is registered trademark of Creative Technology Ltd Revision Revision Date V1 0 2013 05 Preface Upgrade and Warranty Please note that certain components preinstalled in the product may be upgradable or replaceable by user s request To learn more about upgrade limitation please refer to the specifications in the User s Manual For any further information about the product users purchased please contact the local dealer Do not attempt to upgrade or replace
51. ke up from power saving mode in response to a com mand from any of the following m the power button m the network Wake On LAN m the mouse m the keyboard e Energy Saving Tips Turn off the monitor by pressing the LCD power button after a period of user inactivity Tune the settings in Power Options under Windows OS to optimize your PC s power management Install power saving software to manage your PC s energy consumption Always disconnect the AC power cord or switch the wall socket off if your PC would be left unused for a certain time to achieve zero energy consumption Wind Top Series System Recovery Tool The Recovery Tool is only available on systems bundled with Windows OS and MSI utilities by default The purposes for using the Recovery Tool may include Restore the system back to the initial status of original manufacturer s default settings When some errors have occurred to the operating system in use When the operating system is affected by virus and is not able to work nor mally When you want to install the OS with other built in languages Before using the Recovery Tool please back up the important data saved on your sys tem drive to other storage devices If the following solution fails to recover your system please contact the authorized local distributor or service center for further assistance Recovering the System with the F3 Hotkey If the system encounters non recoverable
52. nd Top Series mW 9 DO NOT turn off the system power while performing the system recovery function or it may cause unknown damage to the system 10 The following message indicates successful system recovery Press OK to restart the system and access the Windows operating system as usual Recovery Manager x Windows B Recovery is successful Please press OK and restart your system 4 27 11 If the recovery process is interrupted or failed please repeat the recovery procedures from the beginning M ma System Operations Windows 8 i Refresh PC Settings Control Panel Personalization PC info Help KI Available Y eso N Co continue Refresh your PC Here s what will happen PC settings Activate Windows Personalize Users Notifications Search Share Privacy Devices Ease of Access Sync your settings HomeGroup Windows Update Your files and personalization settings won t change Your PC settings will be changed back to their defaults Apps from Windows Store will be kept Apps you installed from discs or websites will be removed A list of removed apps will be saved on your desktop Recovery from the Operating System The Refresh PC utility checks whether the system files Windows registry and other important system components are working fine or not on finding issues with Windows files it will attempt to repair your PC If
53. ng your AlO PC The entire booting setup will take you around 30 minutes 1 Windows setup starts running Please wait until Windows setup finishes the prog ress loading 2 Select the language of the operating system and click Next to continue 3 Choose the Country or region Time and currency and Keyboard layout you need Click Next to continue 4 Choose a user name for your account and name your computer to distinguish it on the network Click Next to continue 5 Set a password for your account to protect your user account from unwanted us ers Leave this field blank if no need for password Click Next to continue 6 Please read the license terms Check the I accept the license terms box and click Next to continue 7 Select Use recommended settings for Help protect your computer and improve Windows automatically 8 Review your time and date settings Click Next to continue 9 Please choose a wireless network you intend to join from the provided WLAN list Click Next to continue You may also click Skip to skip this step and set up the WLAN later 10 Optional Followingly comes the anti virus software screen Click Agree to ac cept the license agreement terms and activate the anti virus software Alterna tively choose Stay Unprotected and click Next to proceed without activating the anti virus software 11 The Software Installation Menu pops up Click
54. not expressly approved by the party responsible for com pliance could void the user s authority to operate the equipment Notice 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits VOIR LA NOTICE D INSTALLATION AVANT DE RACCORDER AU RESEAU This device complies with Part 15 of the FCC Rules Operation is subject to the follow ing two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may Cause undesired operation Wind Top Series m WEEE Statement English Under the European Union EU Directive on Waste Electrical and Electronic Equipment Directive 2002 96 EC which takes effect on August 13 2005 products of electrical and electronic equipment cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life French Francais Au sujet de la directive europ enne EU relative aux d chets des quipement lectriques et lectroniques directive 2002 96 EC prenant effet le 13 ao t 2005 que les produits lectriques et lectroniques ne peuvent tre d pos s dans les d charges ou tout simplement mis la poubelle Les fabricants de ces quipements se ront oblig s de r cup rer certains produits en fin de vie German Deutsch Gem
55. odukt w b d zobowi zani do odbierania ich w momencie gdy produkt jest wycofywany z u ycia Hungarian Magyar Az Eur pai Uni EU 2005 augusztus 13 n hat lyba l p az elektromos s elektronikus berendez sek hullad kair l sz l 2002 96 EK ir nyelve szerint az elektromos s elektronikus berendez sek t bb nem kezelhet ek lakoss gi hullad k k nt s az ilyen elektronikus berendez sek gy rt i k teless v lnak az ilyen term kek visszav tel re azok hasznos lettartama v g n Czech e tina Podle sm rnice Evropsk unie EU o likvidaci elektrick ch a elek tronick ch v robk 2002 96 EC platn od 13 srpna 2005 je zak z no likvidovat elek trick a elektronick v robky v b n m komun ln m odpadu a v robci elektronick ch v robk na kter se tato sm rnice vztahuje budou povinni odeb rat takov v robky zp t po skon en jejich ivotnosti Traditional Chinese 8 FX MRCRTABRSRETRiwzT B B 20054F8 H 13 H E 3X892002 96 EC AMEE SRE SES aen gdesgen HFF A4 EFRR HAEEREARAER AE ETER Simplified Chinese Ft xc KAT RINTAKRBUSETIREET JRBUER20055F8B 13H 4E3892002 96 EC AXA E EBAJLEB Fi ms TIBA BAYAN Bo BIKE RAHE 9NE ia fie HED ARTEA Japanese HAs 2005 8H13A JAFE CEUZTIBSES Zr JS SEA GARA cl WEEE KSC KAW ODS HCXHOUD HT DILY IORRARBIISNTHY RR MEULTHTSCEDBIEEUY LIONS BBIISNTWET Korean 204 200544 824 13942 z ABE mp 7
56. ontrol the power manage ment features of your display hard drive and battery Go to Start gt Control Panel gt System and Security Adjust your computer s settings System and Security Review your computer s status Save backup copies of your files with File History Find and fix problems Then click on the Power Options link Power Options Require a password when the computer wakes Change what the power buttons do Change when the computer sleeps Select a power plan that suits your personal needs You may also fine tune the settings by clicking Change plan settings wm EI gt Control Panel System and Security Power Options Control Panel Home e Choose or customize a power plan Require a password on wakeup A power plan is a collection of hardware and system settings like display brightness sleep etc that manages how your computer uses power Tell me more about power plans Choose what the power buttons do Preferred plans Create a power plan Balanced recommended Change plan settings IJ Choose when to turn off the Automatically balances performance with energy consumption on capable hardware display Change when the computer Power saver Change plan settings sleeps Saves energy by reducing your computer s performance where possible Show additional plans O Wind Top Series The Shut Down Computer menu presents the options of Sleep S3 S4 amp Shut Down S5 for rapid and easy man
57. ox to close it E System Operations Windows 7 On Screen Display OSD The on screen display OSD allows you to tune the viewing options of the monitor such as brightness contrast positioning language etc Mode Monitor Power System Power Menu Enter Up Volume Up Down Volume Down Press the Menu button to launch the OSD main menu Use the Up and Down buttons to select the desired function menu and press the Menu button to enter Use the Up and Down buttons to select or tune the values to suit your personal preferences After the settings are done press the Mode button to exit Adjusting contrast and nS MODE Exit MENU Enter Adjusting color MODE Exit MENU Enter Wind Top Series mW Adjusting phase focus amp clock pitch Adjusting screen position MODE Exit MENU Enter MODE Exit MENU Enter Adjusting signal source MODE Exit MENU Enter MENU Enter HDMI in Specifying language MODE Exit MODE Exit MENU Enter Deutsch Frangais Game Espanol Italiano Cinematic e EB m System Operations Windows 7 Adjusting wide screen mode MODE Exit MENU Enter Resetting system MODE Exit MENU Enter Wide Mode 2 Press the Up amp Down buttons to adjust the system volume 3 Press the Mod
58. problems it is always recommended that you try the F3 hotkey to recover your system with the recovery partition of the hard disk drive first Follow the instructions below to continue 1 Restart the system 2 Press the F3 hotkey on the keyboard when the following image appears msi a 4 Press F3 key to run Recovery Tool ri Press DEL key for BIOS Setup Press F11 key for Boot Menu EV System Operations Windows 7 3 Enter the Recovery Tool This tool contains three features Backup System Restore System and Recover to factory default D 7 FREcOVERY Ton X Ce 1 30 OFF t to select ENTER to confirm ESC to exit e r Recover to Backup omi Restore System factory default System Backup It is highly recommended that users back up the system as the solution in the event of a catastrophic disk failure or other accidents Follow the instructions below to continue 1 Select Backup System to enter Alternatively select X or press Esc on the key board to exit meas fFRECOVERY TOOL Y BE n Le E To b EI e e b i OY t to select ENTER to confirm ESC to exit Recover to factory default Backup System Restore System Wind Top Series mW 2 Select BACKUP to start the system backup immediately i The Initial Backup The initial backup may take a while Please let it complete without interruption Nasi fiecnvenrny TOOL Ce Y KI Backup Syst
59. ptical Disk Drive A DVD Super Multi drive is integrated for your home entertainment Blu ray is option al Eject Hole Insert a thin straight object such as a paper clip into the eject hole to open the optical disk drive manually if the eject button does not work Eject Button Press the eject button to open the optical disk drive Wind Top Series m System Specifications Processor m AMD Kabini APU Accelerated Processing Unit TDP Max 15W Memory m 2 DDR3L DDR3 SO DIMM slots m Supports the maximum of 8GB LAN m Bluetooth optionally supported through built in Bluetooth module Wired LAN supported by Realtek RTL8111G Gigabit Ethernet controller m Wireless LAN optionally supported through Mini PCI E WLAN module Audio HDA Codec by Realtek ALC887 Compliant with Azalia 1 0 specs Display m 21 5 inch Full HD display with LED backlight An optimal resolution of 1920 x 1080 pixels Standard proportion of 16 9 widescreen Rear Input Output 4 USB 2 0 ports m 1 line out jack microphone jack m 1 RJ 45 LAN jack 1 serial port Optional m 1 HDMI out port Optional 1 TV tuner antenna connector Optional Side Input Output 2 USB 3 0 ports m 1 DC power jack Storage m Hard Disk Drive 3 5 SATAIII m Optical Disk Drive Slim DVD Super Multi Blu ray is optional Card Reader 3 in 1 SD MS MMC Stereo Speaker m 2 stereo speakers Overview WebCam m Support
60. rm ESC to exit bf 3 r Recover to factory default Backup System Restore System Ca e N e NG System Operations Windows 7 2 Select OK or NEXT so that the system can recover to the previous backup or de fault setup Alternatively select CANCEL to stop the system restore immediately m With backup files restoring the system to the previous backup bY fiecnveny TOOL E Pala Dp ka ares Va NESTOTE gt yste m e E Ces to 2011 10 10 09 32 02 CANCEL iU Without backup files restoring the system to the default setup Nasi fiecnvery TOOL No image files in the backup Select Next so that the system can recover to the default setup CANCEL Wind Top Series 3 The system restore is in progress Please note that it may take a while Do not switch off the power or it may cause unknown damage to the system M d FREcOVERY TOOL E ms pen ye Portree Va Restore System e Ty rar var T e e system recovery in progress Blanea An nat yer Ve eee ikan Please do not switch off the power 4 The following message indicates a successful system restore Press OK to finish Restart the system and access the Windows operating system as usual If the restore process fails or is interrupted please start the whole procedure all over again WX fiecnveny TOOL CANCEL 3 24 System Operations Windows 7 System Recovery This tool helps to recover the
61. rve energy Make a plan active by selecting it or choose a plan and customize it by changing its power settings Tell me more about power plans Preferred plans Balanced recommended Change plan settings Automatically balances performance with energy consumption on capable hardware Power saver Change plan settings Saves energy by reducing your computer s performance where possible Show additional plans Co o System Operations Windows 7 The Shut Down Computer menu presents the options of Sleep S3 S4 amp Shut Down 5 for rapid and easy management of your system power E Magnifier j Solitaire Control Panel Devices and Printers Calibration Default Program Switch user Q msi Wind Match ag Log off elp and Suppo Sa gt All Programs Restart Power Management through ENERGY STAR quali fied monitors Optional The power management feature allows the computer to initiate a low power or Sleep mode after a period of user inactivity When used with an external ENERGY STAR qualified monitor this feature also supports similar power management features of the monitor To take advantage of these potential energy savings the power management feature has been preset to behave in the following ways when the system is operating on AC power Turn off the display after 15 minutes Initiate Sleep after 30 minutes Waking the System Up The computer shall be able to wa
62. se it is highly recommended that you create a system recovery disc as the backup solution in the event of a catastrophic disk failure or other ac cidents Before moving forward please make sure your system booting setup is complete and go over the following procedures to get it done 1 Double click the BurnRecovery icon on the desktop to launch the Recovery Disc Creation Tool Please note that it may take a while for the operating system to prepare recovery files Burn Recovery Prepare files please wait 2 Click Next to start the image creation of the recovery disc Burn Recovery _4 Thank you for using Recovery Disc Creation Tool 1 E The Recovery disc can restore your system back to default settings Ifyou wantto create a recovery disc now please follow Wind Top Series mW 3 Select Create and burn a recovery disc and click Next to continue Alterna tively choose Advanced to bring forth advanced options Burn Recovery Thank you for using Recovery Disc Creation Tool i Cree andbumarecovey dec 4 The image of recovery disc is being created It takes some time to finish the processing Burn Recovery Thank you for using Recovery Disc Creation Tool I F Creating the Recovery disc Please wait a X O System Operations Windows 8 5 Follow the on screen instructions to prepare enough number of blank DVD discs Insert the blank DVD disc into the optical disc
63. system back to factory default settings All data on the HDD will be erased while all settings will be restored to factory default Follow the instructions below to continue 1 Select Recover to factory default to enter Alternatively select X or press Esc on the keyboard to exit oN FREcOVERY TOOL 5 to select ENTER to confirm ESC to exit gt Ce 7 Recover to Backup System Restore System factory default 2 The system will be recovered to factory settings All data will be gone Make sure all important data have been backed up Select NEXT to continue Alternatively select CANCEL to stop ver to factory default CANCEL Wind Top Series mW 3 Please select OK so that the system can recover its default setup fiecnvery TOOL Recover to factory default 4 The system recovery is in progress Please note that it may take a while Do not switch off the power or it may cause unknown damage to the system REcovery TOOL EL si A ud Recover to factory default e Se Ca DT N e SR System Operations Windows 7 5 The following message indicates a successful system recovery Press OK to fin ish Restart the system and access the Windows operating system as usual If the recovery process fails or is interrupted please start the whole procedure all over again p fiecnvery TOOL E AR n eg Kg Si P TEY 4 Pd Recover to factory default Ce MG CANCEL
64. to clean for a hard disk with multiple partitions Your PC has more than one drive Do you want to remove all files from all drives Only the drive where Windows is installed All drives Cancel 4 Now select either to remove files or to fully clean drives according to your needs 4 31 Do you want to fully clean your drive When you remove your files you can also clean the drive so that the files can t be recovered easily This is more secure but it takes much longer Just remove my files This will take a few moments Fully clean the drive This will take much more time Cancel a N P System Operations Windows 8 9 It is now ready to reset your PC click Reset and follow the on screen instructions to restart your PC Ready to reset your PC This will remove your personal files and apps from your PC and restore all settings to their defaults If you use File History make sure the latest versions of your files were copied to your File History drive before you proceed This will take a few minutes and your PC will restart ses E Appendix A Troubleshooting d Troubleshooting My system does not start 1 Check if the system is connected to an electrical outlet and it is turned on 2 Check if the power cord and all cables are connected firmly When turn on my computer the message Operating System not found appears or Windows does not start 1
65. to particular feature view for necessary setting controls Advanced Setting Sound YY BLASTER CINEMA E Mum e User Profile SBX Pro Studio Master SBX PRO STUDIO ON OFF SURRDUND Feature Title Control Slider Feature Toggle Volume Control Mute Wind Top Series H Tool Tip When you hover the mouse cursor over a button slider or feature name on the panel a tooltip will show describing the particular function of that item Adjust the loudness of your audio playback automatically to minimize sudden volume changes Users Profile Drop down list provides three different profiles 1 Music Listening 2 Movies Watching 3 Games Playing A custom profile is available for you to customize the profile It will be automatically saved once application has exit SBX Pro Studio Master ON OFF Click on the Master ON OFF button to experience the 3 9 full effect of SBX Pro Studio Feature Toggle Click on the individual feature toggle to have control over the five SBX Pro Studio technologies SURROUND provides immersion control to enhance the natural sense of audio depth SURROUND and spaciousness by creating virtual sur round sound channels CRYSTALIZER restores the natural E B dynamic range that is lost when iTunes and MP3 music gets compressed 7 uf P pma m BASS fills in the missing low frequency tones and gives the extra impact for a better J r entertainment experience i SMA
66. webcam with microphone Power Supply m 65 watt AC DC adapter with active PFC m Input 100 240V 50 60Hz 1 5A m Output 19V 721 3 42A ER cM o Wind Top Series m Component Replacement amp Upgrade Please note that certain components preinstalled in the product may be upgradable or replaceable by user s request depending on the models users purchased INCAS PARED Bu msi SCHO NIT id eueqe SEKR mo SS e a 00 0 00 0 0 0 00 0 0 0 0 6 GB GG O 0 0 0 0 O O O DG aaa fff Q N No To learn more about upgrade limitation please refer to the specifications in the User s Manual For any further information on the product users purchased please contact the local dealer Do not attempt to upgrade or replace any component of the product if you are not an authorized dealer or service center since it may cause the warranty void It is strongly recommended that you contact the
67. widescreen Stereo Speakers The built in stereo speakers deliver high quality sound blaster with stereo system Overview gt Rear View A Far O NT Important We suggest that you connect the AC DC adapter to your AIO PC first and then connect the AC power cord to the socket outlet for safety concerns o O 8 O Wind Top Series Ventilator The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating Do not cover the ventilator Kensington Lock Port This AIO PC provides a Kensington lock port which allows users to secure the AIO PC in place with a key or some mechanical PIN device and attached through a rubberised metal cable The end of the cable has a small loop which allows the whole cable to be looped around a permanent object such as a heavy table or other similar equipment thus securing the AIO PC in place Stand Use this stand to position your system on a flat an

MSI Wind Top AE220-037EU

Contents

Download Pdf Manuals

Related Search

Related Contents