Powerplus POW4001 power sander
Contents
1. eee reeee enn 8 Copyright 2013 VARO Page 1 www varo com POWERPLUS POWA001 EN DESIGNED AND MARKETED BY VARO HANDPALM SANDER 135W POW4001 1 APPLICATION The sander is used to sand and buff wood plastic and similar materials It is very important to use the correct sandpaper It is not designed for commercial use before using the machine for your own safety Your power tool should only WARNING Read this manual and the general safety instructions carefully be passed on together with these instructions DESCRIPTION 2 1 Sanding disk 2 On off switch 3 Dust extractor connection 4 Dust extraction connector 5 Cable 3 PACKAGE CONTENT LIST Remove all packing materials Remove remaining packaging and transit supports if existing Check the completeness of the packing content Check the appliance the power cord the power plug and all accessories for transportation damages Keep the packaging materials as far as possible till the end of the warranty period Dispose it into your local waste disposal system afterwards WARNING Packing materials are no toys Children must not play with plastic bags Danger of suffocation 1pcs handpalm sander 135W 10x sanding papers 3X 80gr 3x 120gr 4x 120gr 1 x Dust extractor adaptor manual o When parts are missing or damaged please contact your dealer Copyright 2013 VARO Page 2 www varo com POWERPLUS POWA001 EN DESIGNED AND MARKETE2. manual inexpert assembly lightning strike erroneous net voltage This list is not exhaustive Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement Devices or parts which are replaced under the warranty therefore remain the property of Varo NV Wereserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained Clean ventilation slots carbon brushes serviced regularly etc Your purchase receipt must be kept as proof of date of purchase Your appliance must be returned undismantled to your dealer in an acceptably clean state in its original blow moulded case if applicable to the unit accompanied by proof of purchase Copyright 2013 VARO Page 7 www varo com POWERPLUS POWA001 EN DESIGNED AND MARKETED BY VARO 14 ENVIRONMENT Should your appliance need replacement after extended use do not discard it with the household rubbish but dispose of it in an environmentally safe way Waste produced by electrical machine items should not be handled like normal household rubbish Please recycle where recycle facilities exist Check with your Local Authority or retailer for recycling advice 15 DECLARATION OF CONFORMITY VARO N V Joseph Van Instraat 9 BE2500 Lier BELGIUM declares that Product Handpalm Sander 135W Trad
3. D BY VARO 4 SYMBOLS In this manual and or on the machine the following symbols are used Denotes risk of personal ee Read manual before use injury or damage to the tool In accordance with essential Class II The machine is double safety standards of applicable insulated Earthing wire is European directives therefore not necessary Wear a mask In dusty conditions Mandatory use of eye protection 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions Failure to follow all warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool 5 1 Work area Keep work area clean and well lit Cluttered and dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating a power tool Distractions can cause you to lose control 5 2 Electrical safety Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with earthed or ground
4. POWERPLUS powon EN 1 APPEICA HON ouo inuE tu amo uRHE Utd d Ro pue CU pud ud vi C MEE 2 2 Biz eme E n 2 3 PACKAGE CONTENT LIST e ereee eee reee eren nnn 2 4 SIMBOLS c M 3 5 GENERAL POWER TOOL SAFETY WARNINGS 3 5 1 WU OTIC ICE 3 5 2 Jugo 3 5 3 lzictiE i i c n0 0 0 SS4 4 5 4 POWEF tool use and CAIC ee 4 5 5 SOE VI CO e 4 6 ADDITIONAL SAFETY HINTS FOR SANDERS 4 T OPERATING INSTRUCTIONS ec eeeeee re eee enn nns 5 7 1 SWREDINO ONO eM 5 7 2 Attaching the sandpaper 1211 eee elle i iiie e seen e essen nna nna aaa a aun a anna a hahaha aura aa haa annu 5 7 3 Collecting he GUS 6 TECHNICAE DATR cece eric tetas ese circ cere oe tee ve deusicrerocreeseieevereicea 6 NOIE at ttn ee E 6 10 CLEANING AND MAINTENANCE eere nnne 6 11 SERVICE DEPARTMENT 11 eccreee re ree rne n nennen nnns 6 12 STORAGE zem T T 13 piii T 14 ENVIRONMENT arron EEE 8 15 DECLARATION OF CONFORMITY
5. TA Power rating 135W Mains voltage 230V Mains frequency 50Hz Sanding surface 140 x 140 x 80mm No load speed 13 000 min Safety class 9 NOISE Noise emission values measured according to relevant standard K 3 Acoustic pressure level LpA 80 dB A Acoustic power level LwA 91 dB A ATTENTION Wear hearing protection when sound pressure is over 85 i N dB A aw Vibration 6 3 m s K 1 5 m s 10 CLEANING AND MAINTENANCE The machine does not require any special maintenance For safe and efficient working always keep the machine and the ventilation slots clean Always be sure that the tool is switched off and unplugged before carrying out any work on the tool 11 SERVICE DEPARTMENT Damaged switches must be replaced by our after sales service department Copyright 2013 VARO Page 6 WWW Varo com POWERPLUS POWA001 EN If the connecting cable or mains plug is damaged it must be replaced by a particular connecting cable which is available from our service department Replacement of the connecting cable must only be carried out by our service department see last page or by a qualified person qualified electrician a STORAGE Thoroughly clean the whole machine and its accessories Store it out of the reach of children in a stable and secure position in a cool and dry place avoid too high and too low temperatures Protect it from exposure to direct sunlight Keep it in the dark if possible Don t
6. US POW4001 EN Take special care when sanding lead based paint Lal persons entering the work area must wear a mask specially designed for protection against lead paint dust and fumes Children and pregnant women must not enter the work area Do not eat drink or smoke in the work area Do not leave the tool running Operate the tool only when hand held Ventilate your work area adequately when you perform sanding operations Be sure that there are no cracks or breakage on the pad before use Cracks or breakage may cause a personal injury 7 OPERATING INSTRUCTIONS Do not sand plaster surfaces WARNING In this case your guarantee becomes void this may clog the motor brushes ball bearings 7 1 Switching On off Press On off switch I O 7 2 Attaching the sandpaper Select sandpaper with the correct grain size Make sure the perforations in the paper coincide with those on the sanding base plate The sandpaper should rest flush on the base plate and must not come loose You can be sure to find the right sandpaper among our product range see technical specifications Copyright 2013 VARO Page 5 www varo com POWERPLUS POW4001 EN DESIGNED AND MARKETED BY VARO 7 3 Collecting the dust For a better dust extraction of the working surface your sanding machine can be connected to the ordinary vacuum cleaner for house use Use the supplied dust extraction connector POWERPLUS 8 TECHNICAL DA
7. allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or sticking of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to stick and are easier to control Use the power tool accessories and tool bits etc in accordance with these instructions and in the manner intended for the particular type of power tool taking into account the working conditions and the work to be performed Use of the power tool for operations different from intended could lead to a hazardous situation 5 5 Service Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained 6 ADDITIONAL SAFETY HINTS FOR SANDERS Always wear safety goggles and a dust mask during your work with the finishing sander Always secure the work piece by clamps or else to avoid slipping away Always keep the holes in the base plate clean from dust Always connect a vacuum cleaner to the attached adaptor during your work Copyright 2013 VARO Page 4 www varo com POWERPL
8. e mark POWERplus Model POW4001 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives based on the application of European harmonized standards Any unauthorized modification of the apparatus voids this declaration European Directives including if applicable their amendments up to the date of signature 2006 42 EC 2004 108 EC 2011 65 EU European harmonized standards including if applicable their amendments up to the date of signature EN60745 1 2009 EN60745 2 4 2009 EN55014 1 2006 EN55014 2 1997 EN61000 3 2 2006 EN61000 3 3 2008 Keeper of the Technical Documentation Philippe Vankerkhove VARO Vic Van Rompuy N V The undersigned acts on behalf of the company CEO Hugo Cuypers Regulatory Affairs Compliance Manager 09 04 13 Copyright 2013 VARO Page 8 www varo com
9. ed surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock f operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock Copyright 2013 VARO Page 3 www varo com POWERPLUS POWA001 EN 5 3 Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use safety equipment Always wear eye protection Safety equipment such as dust mask non skid safety shoes hard hat or hearing protection used whenever conditions require will reduce personal injuries Avoid accidental starting Ensure the switch is in the off position be
10. fore plugging in Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts f devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of these devices can reduce dust related hazards 5 4 Power tool use and care Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store idle power tools out of the reach of children and do not
11. keep it in plastic bags to avoid humidity build up i WARRANTY This product is warranted as provided by law for a 24 month period effective from the date of purchase by the first user This warranty covers all material or production flaws excluding batteries chargers defective parts subject to normal wear amp tear such as bearings brushes cables and plugs or accessories such as drills drill bits saw blades etc damage or defects resulting from maltreatment accidents or alterations nor the cost of transportation Damage and or defects resulting from inappropriate use also do not fall under the warranty provisions We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool Repairs may only be carried out by an authorised customer service centre for Powerplus tools You can always obtain more information at the number 00 32 3 292 92 90 Any transportation costs shall always be borne by the customer unless agreed otherwise in writing Atthe same time no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload Definitely excluded from the warranty is damage resulting from fluid permeation excessive dust penetration intentional damage on purpose or by gross carelessness inappropriate usage use for purposes for which the device is not suitable incompetent usage e g not following the instructions given in the
Download Pdf Manuals
Related Search