iHome IBN27
Contents
1. Use the controls on your device to play or pause audio navigate tracks and adjust volume When done istening move the Power ON OFF Switch to OFF position to turn the unit OFF Remember to urn off your audio device too NOTE unlink your device simply touch it again on antenna area on top of the unit Similarly to switch between music playing from two paired NFC devices touch the N area of the desired device to the Wantenna area on top of the unit To pair a device manually please see the following Pairing Your Device Manually section Using Bluetooth Pairing Your Device Manually For First Time use auto pairing 1 Turn on your Bluetooth enabled manual 2 Move the Power ON OFF S device and turn on Bluetooth capability as described in the device s user witch on the unit to the ON position right The first time the unit is turned on it will enter auto pairing mode indicated by a rapidly flashing blue light NOTE In any mode auto link pairing Bluetooth or Aux audio if the unit is connected to charging source the indicator light will be red instead of blue iHome iBN27 should appear on your device s menu If Not Paired Not Connected or similar message appears tap on iHome iBN27 to complete pairing If your device asks for a password enter 1234 on the keyboard of your device 3 Once paired with a device tl device that pairing is complete blue light will glow steadil2. not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment IC Statement his device complies with Industry Canada licence exempt RSS standard s Operation is subject to the ollowing two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device e pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence l exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement he device meets the exemption from the routine evaluation limits in section 2 5 of RSS 102 and compliance with RSS 102 RF exposure users can obtain Canadian information on RF exposure and compliance e dispositif rencontre l exemption des limites courantes d valuation dans la section 2 5 de RSS 102 et la conformit l exposition de RSS 102 rf utilisateurs peut obtenir l information canadienne sur l exposition et a conformit de rf his device compl
3. resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI product 2014 SDI Technologies Inc All rights reserved Questions Visit www ihome com iBN27 140314B or call 1 800 288 2792 Toll Free Printed in China
4. the Bluetooth Pairing Button again Playing Audio Via Bluetooth 1 Move the Power ON OFF Switch to ON position right to listen to audio streamed wirelessly from your paired iPad iPhone iPod or other Bluetooth device The blue light will flash as the unit searches for a previously paired device and then turn solid blue once a previously paired device is detected 2 Use the controls on your device to play or pause audio navigate tracks and control volume from your Bluetooth device 3 When done listening move the Power ON OFF Switch to the OFF position left to turn the unit off NOTE Auxin audio is disabled when Bluetooth audio is playing from a different device Playing Audio via Aux In 1 Connect the included 3 5 mm audio cable plug to the headphone or line out jack on your audio device and the other end into the Auxin Jack on the back of the unit 2 Move the Power ON OFF Switch to the ON position right to listen to audio via aux in The indicator light will flash blue 3 Power on the audio device and use the controls on the device to play or pause audio navigate tracks and control volume If your audio device is already paired with the unit the light will glow steadily blue as in Bluetooth mode but you will hear your audio via auxin 4 When done listening move the Power ON OFF Switch to the OFF position left to turn the unit off Remember to turn off your audio device too Playing Audio via Aux Out You c
5. under license from Bluetooth SIG Inc The is a trademark or registered trademark of NFC Forum Inc in the United States and in other Countries Limited 1 Year Warranty iHome Products a division of SDI Technologies Inc hereafter referred to as SDI warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of one 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction durin he warranty period SDI will repair or at its discretion replace this product without charge This decision is subject to verification of the defect or malfunction upon delivery of this product Io the Factory Service Center authorized by SDI Customer Service The product must include proof of purchase including date of purchase An outoFwarranty fee for service will be charged for units that are received without proof of purchase Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Call SDI Customer Service at 1 800 288 2792 for Return Authorization and for the address of the Factory Ser
6. Model iBN27 Wireless Rechargeable Stereo Speaker CHARGE BEFORE USE instruction manual FCC ID EMOIBN24 IC 986B IBN24A FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may
7. an connect the unit to an external speaker via the Aux out jack located on the back of the unit to expand the audio playing in Bluetooth or 1 modes Connect a 3 5 mm audio cable plug to the Aux out jack on back of the unit and connect the other end to the line in jack on your external speaker Move the Power ON OFF Switch to the ON position right Power on a Bluetoot navigate tracks and When done listening move the Power ON OFF Switch to the OFF position left to turn the unit off Remember to 2 3 4 urn off h or auxin audio device and use the controls on the device to play or pause audio control volume your audio device too Playing Audio From a Computer via USB The included micro USB 1 harging i 2 Connect the s Si Si setup steps for etting up on iBN27 sh Under Control PC amp a PC BN27 Connect the micro USB plug to the micro USB charging audio port on the back of the unit andard USB plug end of the cable to a USB port on your computer Below are typical o standard USB cable lets you play audio from a USB port on a Mac or PC while Mac ould automatically load required audio drivers onto your PC when connected via USB Panel gt Sound select iHome iBN27 and click on Set Default etting up on a Mac OSX Open System Preferences gt Hardware gt Sound click on the Output tab then select iHome iBN27 Use the audio controls on you
8. devices Trouble pairing device computer with iBN27 Bluetooth implementation varies depending on your device s hardware and operating system Please see our website for updates on pairing Make sure you have the latest firmware for your device Make sure your device is working properly Check your device s manual for details on Bluetooth pairing and linking For further information and to see the latest instructions visit www ihome com support 9 Internal Rechargeable Lithium ion Battery This device uses an internal rechargeable lithium ion battery that should last the lifetime of the device If you suspect your battery may be dead try charging it several times If the battery does not recharge please contact us for repair information WARNING DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself If the battery has died and you do not want us to replace your eA battery you should follow the disposal instructions below lever dispose of used batteries electronics with ordinary solid wastes since they contain toxic substances Ways dispose of used batteries electronics in accordance with the prevailing community regulations that apply disposal of batteries electronics If there are no local regulations concerning battery electronics disposal please dispose of the device in a waste bin for electronic devices Many electronics retailers now recycle batteries and other electronic com
9. e used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement 2 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a builtin installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket Cleaning The unit should be cleaned only using a warm damp cloth Do not use solvents etc Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product ae 8 Attachments Do not use attachments not recommended by the product manu
10. facturer 9 lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and powerline surges 10 Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally 12 Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion 13 Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel Questions Visit www ihome com or call 1 800 288 2792 Toll Free Bluetooth is a registered trademark of Bluetooth SIG Inc Bluetooth technology is incorporated
11. ies with Industry Canada licence exempt RSS standard s Operation is subject to the ollowing two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device e pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence l exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement CAN ICES 3 B NMB 3 B QDID B021970 Introduction Thank you for purchasing the iHome iBN27 This product is designed to provide high quality wireless sound for your iPad iPhone iPod computer PDA or other Bluetooth audio device Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit Please read them carefully and keep for future reference This unit features NFC near field communication technology which allows you to wirelessly connect your NFC enabled device to instantly pair and play See your device s user manual for details on how to interact with NFC devices If your Bluetooth device does not support NFC you can pair it manually with this unit Maintenance Place the unit on a level
12. ponents at no charge Check to see which ones in your area do so CAUTION The battery used in this device may present a risk of fire explosion or chemical burn if mistreated e eA eA lever use or charge the battery if it appears to be leaking discolored deformed or in any way abnormal ever disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other lectrolytic substance lways confirm that the temperature is 5 C 35 C 41 95 Fahrenheit before you charge the battery Leakage or deterioration of the battery may occur if this warning is not heeded lever expose the battery to any liquid lever expose the battery to excessive heat such as direct sunlight or fire Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered ways keep the battery out of the reach of infants and small children Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 Water and Moisture The unit should not b
13. r computer to play or pause audio navigate tracks and control volume Note while connected via USB with iBN27 selected as the audio output source audio will play through the IBN27 whether it is turned ON or OFF When finished listening stop play in your computer and disconnect the USB cable from the iBN27 OR unselect iBN27 as an audio output source in your computer 8 Troubleshooting Unit doesn t respond no power Make sure unit is completely charged e Check that all connections are correct and properly plugged in Make sure your device is properly paired with the iBN27 Make sure the Power ON OFF Switch is not in the OFF left position If the unit cannot be charged up please remove the auxin cable from the unit and slide the Power ON OFF Switch to OFF position before charging Resetting the Unit If the unit is frozen or locks up you may wish to reset it To do so turn unit ON and press the end of paper clip or similar into the reset port on the back of the unit for less than 2 seconds to reset it without clearing Bluetooth settings The unit will reset and power back on lf pressed for longer than 2 seconds the unit will reset but will not power back on To reset Bluetooth settings turn unit ON then press and hold the Bluetooth Pairing Button on the back of the unit for 8 seconds The light will flash red rapidly and a tone will sound You will then need to repair any previously linked
14. surface away from sources of direct sunlight or excessive heat Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture e Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as benzene thinner or similar materials can damage the surface of the unit Included iBN27 system Micro USB to USB charging audio cable 3 5mm stereo audio cable ol iBN27 System USB charging audio cable Audio cable Meet Your iBN27 Antenna area Top Power Charging Pairing _ Indicator Light LI LI auxin powerin on pairing speaker out ce reset O 7 O Reset port Front Back Auxin Jack Aux out Jack Micro USB Charging Audio Port Bluetooth Pairing Button Power On Off Switch 3 Charging the Unit 1 Connect the micro USB plug to the micro USB charging audio port on the back of the unit Charge via computer USB port USB AC adaptor or other powered USB port iHome iBN27 USB port OS Computer connected 4 to working outlet Computer USB port NOTE When unit is on and not connected to power source the red light will slowly flash for a short time 10 times each minute to indicate the battery needs charging 2 Connect
15. the standard USB plug end of the cable to a power USB port on a computer or other USB charging device For first time use charge unit for about 3 hours 3 A red light glows steadily while the unit is charging and turns OFF once the unit is fully charged If unit is not powered on when micro USB plug is connected the red light glows steadily to indicate unit is charging For best sound performance only operate the unit when fully charged Using Bluetooth Pairing and Playing Your Device Using N This unit features wireless NFC pairing which allows playing NFC enabled devices to pair and play instantly For pairing non NFC devices please see the following section Pairing Your Device Manually lt Turn on your Bl typically unde Place your NFC enabled device in play mode Move the iB Touch the area of your playing NFC device against the N uetooth enabled NFC enabled device and turn on NFC capability r Settings as described in the device s user manual 27 s Power ON OFF Switch to the ON position antenna area on top of the unit The unit will enter automatic pairing mode tones will sound and the light will flash blue while the unit attempts to pair If promp ed accept Bluetooth pairing iHome iBN27 should appear on your device s menu Once paired with a device the blue indicator light will glow steadily a confirmation tone will sound and your music will play through the unit
16. vice Center 2 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box SDI is not responsible for damage that occurs during shipping to the Factory Service Center 3 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period Also include your name and address information a brief description for why the unit is being returned and the return authorization number No unit can be processed without a return authorization number 4 Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service Center address authorized by SDI Customer Service Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and ifs return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI or any of its affiliates contractors
17. y There should be an indication on your Connected or similar On some devices you must then select Use as Audio Device or similar on the device s Bluetooth menu Once paired your device should auto ink to the iBN27 whenever within range about 30 feet If auto pairing did not work press and hold the Bluetooth Pairing Button loca ed on the back of the unit for 2 seconds to retry pairing Once the Unit Has Paired with A Device auto linking 1 When the unit has been paired with a device the next time it is powered on the unit will turn on in auto link mode and attempt to auto link to a previously paired device indicated by a slowly flashing blue light If a linked device is found the indicator will glow solid blue 2 If no linked device is found blue light will continue to flash slowly Press and hold the Bluetooth Pairing Button located on the back of the unit for 2 seconds The unit will enter pairing mode 2 short beeps will sound and the ligh will flash blue rapidly while the unit attempts to pair Using Bluetooth Pairing Your Device cont d iHome iBN27 should appear on your device s menu If Not Paired Not Connected or similar message appears tap iHome iBN27 to complete pairing If your device asks for a password enter 1234 on the keyboard of your device If no device is paired within 2 minutes the unit will revert to auto link mode To retry pairing press and hold
Download Pdf Manuals
Related Search