Technoline WS 6650 weather station
Contents
1. Fig 3 Weather pattern 2 Press HISTORY button 2 to confirm weather pattern Interpreting the weather forecast symbols The weather station requires at least 24 hours on acclimatizing to local weather conditions The weather station process and analyze the weather patterns for the past 24 hours in order to determine the future weather Until that time has elapsed the predicted weather forecast may not accurately reflect the actual weather for your immediate area The weather station will display the symbols see fig 3 to indicate the predicted weather forecast for the next 12 to 24 hours for an area within a radius of approximately 30 50 km Note 1 Accuracy rate might be lower in extreme weather conditions The weather forecast is only for reference only and it is only for domestic use only Do NOT rely on the weather station for weather forecast if any serious matter replies on it including but not limited to personal health life and death situation any business or financial decisions and or agricultural planning 2 The weather forecast does not display the current weather It displays the weather for the future Glowing weather icons Lit weather forecast icons will glow from dim to bright and back to dim at a regular interval Adjusting the weather station 1 Press HISTORY button 2 for 3 seconds until a beep sound is heard 2 Press RCC button 4 or C F button 5 to toggle between absolute ABS a2. Press MODE SET button 3 again Press RCC button 4 or C F button 5 to change the minute setting Press MODE SET button 8 again When alarm time is shown press RCC button 4 or C F button 5 to turn on and off the alarm A will be shown when the alarm is on The alarm will sound for 120 seconds when the preset alarm time is reached Hit any button on the back of the clock to deactivate the alarm The clock will automatically enter snooze mode if the alarm is not deactivated Hit the SNOOZE LIGHT button 1 when the alarm is on to enter snooze mode Z Z will flash when the clock is it snooze mode The alarm will sound again in 5 minutes Hit any button on the back of the clock to deactivate the alarm Please note that alarm time setting seize to function when the clock is in RCC synchronization mode Wait until synchronization has ended before setting the alarm time Configuring the thermometer This weather station is equipped to synchronize up to 3 remote temperature sensors One remote temperature sensor is included Additional remote temperature sensor is available for purchase separately Please contact your local distributor for purchase Remote temperature sensors 1 Fig 4 Back View Fig 5 Back view open RTS 1 Hang hole RTS 2 Battery compartment screws RTS 3 TX button RTS 4 RESET button RTS 5 CHANNEL 123 switch Batteries installation 1 Open battery compartment on
3. WS6600 Desktop Weather Station Instruction Manual Introduction This desktop weather station comes with barometric weather prediction clock calendar indoor and outdoor temperature and humidity display It is battery powered with AC charger It is recommended to use the AC charger at all times Optional mirror Fig 1 Front view Fig 2 Back view SNOOZE LIGHT button HISTORY button MODE SET button RCC button C F button CHANNEL button MAX MIN button Battery compartment DC line in jack OONOaARwWNM gt General notes 1 It is recommended to set up the remote temperature sensor before setting up the weather station clock See Configuring Remote Temperature Sensor s for more information Batteries and AC adapter should be used together 2 Please note all other clock weather station settings seize to function when the clock is in RCC synchronization mode See RCC Synchronization for additional information 3 During initial installation the temperature and humidity sensor may take up to an hour or more to acclimatize to current conditions Getting started Installing AC adapter Plug in AC DC adapter at DC input jack 9 see fig 2 Use only approved adapters Optional mirror finish User might choose to use optional mirror finish for decoration purposes Carefully remove adhesive tape backing on the back of the mirror finish and place the mirror finish on the weather station see fig 1 B
4. atteries installation 1 2 3 4 5 Open battery compartment 8 on the back of the unit see fig 2 Install replace 3 x AAA size batteries in the compartment It is recommended that only alkaline batteries are used Replace the battery compartment 8 on the back of the unit A short beep will be heard to confirm proper installation of batteries It will take approximately 3 seconds for the screen to light up Batteries safety warnings 1 NOR WON 8 9 Please read all instructions carefully before use Install batteries correctly by matching the polarities Always replace a complete set of batteries Never mix used and new batteries Remove exhausted batteries immediately Remove batteries when not in use Do not recharge and do not dispose of batteries in fire as the batteries may explode Ensure batteries are stored away from metal objects as contact may cause a short circuit Avoid exposing batteries to temperature or humidity extremes or direct sunlight 10 Keep all batteries out of reach from children They are a choking hazard 11 Please retain packaging for future reference Setting up the weather station The weather station will sound once batteries are installed or ac adapter is plugged in 1 Press RCC button 4 or C F button 5 to change the current weather situation of your location See fig 3 below for the weather pattern that is resembles your immediate area
5. chronize or it is synchronized to set other clock and weather station function If the alarm goes off during synchronization mode RCC synchronization will seize immediately Follow the above instructions again to set synchronization Successful reception or failed reception When A is only shown the DCF time cannot be received in this location A When A is mostly shown and changes to A frequently it is very unlikely that the DCF time can be received in this location i gt m When A is mostly shown with occasional A itis very likely that the DCF time can be received in this location i When A is only shown it is very likely that the DCF time can be received in this location RCC Zone offset This clock is equipped with radio controlled time adjustment The user will need to work out the time zone signal they receive at their current location and make any adjustment as required This function also allows for daylight saving adjustment Contact your local weather bureaus or authorities for more information Press RCC button 4 once for 1 time zone Press RCC button 4 once again for 2 time zone Press RCC button 4 once again for 1 time zone Press RCC button 4 once again for same time zone To set time manually Hold down the MODE SET button 3 for approximately 3 seconds until the display is flashing Press MODE SET button 3 again Press RCC button 4 or C F button 5 to
6. e and current temperature MAX indicates maximum temperature MIN indicates minimum temperature 2 Press and hold MAX MIN button 7 for approximately 3 seconds to reset the maximum and minimum temperature and humidity records Temperature display 1 The IN temperature displays the indoor temperature It is the temperature of the location of the weather station 2 The OUT temperature displays the temperature of the remote temperature sensors 3 Press CHANNEL button 6 on weather station repeatedly to display the temperature of channel 1 channel 2 and channel 3 4 When C is shown the display will automatically show through all the remote sensors channel Press CHANNEL button 6 to cancel Celsius Fahrenheit 1 Press C F button 5 to toggle between displaying the temperature in Celsius and Fahrenheit Temperature Trend 1 matt indicates the temperature is in a increasing trend 2 a indicates the temperature is in a no change trend 3 4 indicates the temperature is in a decreasing trend Warnings e Do not subject the unit to excessive force shock dust temperature or humidity e Do not immerse the unit in water e Dispose the complete unit when battery is no longer charging or when the unit is no longer displaying the temperature and humidity e Do not remove any screws e Do not dispose this unit in a fire IT MAY EXPLODE e Keep unit away from small children The unit or parts of the unit might be a choking ha
7. nce between the remote temperature sensor and the weather station The remote temperature sensor might have to closer than 30 meters if the weather station is not able to receive any signals This is due to obstructions and interference The user might need to experiment with various locations to get the best reception Configuring Weather Station to receive remote temperature signals Follow the above instructions to set up remote temperature sensor Press and hold CHANNEL button 6 on weather station for 3 seconds T will flash This will reset all temperature memories The weather station will begin scanning for signals for channel 1 As soon as signals are received for channel 1 the temperature will be displayed The weather station will automatically scans for the other channels It will scan each channel for approximately 3 seconds before skipping to the next channel Once all your channels are received press CHANNEL button 6 once to confirm the channel Cc will no longer be displayed The weather station will receive a new signal automatically every 30 seconds to update the remote temperature Press CHANNEL button 6 on weather station repeatedly to toggle between channel 1 CH1 channel 2 CH2 and channel 3 CH3 7 ca will be displayed if any of the remote temperature sensor s battery needs replacing Temperature memory 1 Press MAX MIN button 7 to display maximum recorded temperature minimum recorded temperatur
8. nd relative REL atmospheric pressure 3 Press HISTORY button 2 to confirm 4 Press RCC button 4 or C F button 5 to toggle between atmospheric pressure units of Pascal hPa to inch of mercury inHg 5 Press HISTORY button 2 to confirm 6 Press RCC button 4 or C F button 5 to change the sea level closest to your location The sea level units are in meters 1 meter equals approximately 3 28 feet Contact your local weather bureaus or authorities for more information 7 Press HISTORY button 2 to confirm sea level 8 Press RCC button 4 or C F button 5 to change the current weather situation of your location See fig 3 above for the weather pattern that is resembles your immediate area 9 Press HISTORY button 2 to confirm Reading Pressure trend 1 Recorded memory of the barometric pressure changes are displayed with 3 arrows to show pressure trend Increasing Steady e es eS Note It is only possible to measure the barometric pressure trend properly when the unit remains at the same altitude When moving around at different altitudes within a short period of time the air pressure and the barometric pressure will change The pressure trend will only be correct and regulate the has remain at a constant altitude for 24 hours or more To recall recorded pressure history reading The barometric pressure reading is recorded at an hourly interval and can be recalled and dis
9. played up to previous 12 hours Press HISTORY button 2 repeatedly to view pressure recorded in the past hours 1 HR indicates the pressure of the previous hour The pressure reading history will appear for 20 seconds before the current pressure returns RCC Synchronization Where ever available this clock will automatically synchronize with the radio control towers at the following time 02 00 03 00 04 00 05 00 User may also manually synchronize the clock by following the instructions below Press and hold down the RCC button 4 for approximately 3 seconds until A is flashing When this signal is flashing the clock is attempting to synchronize with the radio control i Cay will flash when a strong signal is received and the clock will synchronize with the t Ca radio control This process can take up to 7 minutes A will stop flashing and will be displayed once the signal is received and in synchronization A will not be displayed if the clock is not able to synchronize within this period of time User may manually synchronize again at a later time or the clock will automatically attempts to synchronize at the above mentioned time When the clock is attempting to synchronize press down the RCC button 4 to cancel RCC synchronization Please note all other clock weather station settings seize to function when the clock is in RCC synchronization mode Wait until the clock is no longer attempting to syn
10. the back of the unit by removing the two small screws RTS 2 with a Philips head screwdriver see fig 4 Install replace 2 x AAA size batteries in the compartment It is recommended that only alkaline batteries are used Do not use rechargeable batteries The weather station is capable of receiving up to 3 different channels Select the channel number 1 2 or 3 by sliding the CHANNEL 123 switch RTS 5 If you only have 1 remote temperature sensor select Press the RESET button RTS 4 once and the red light will flash once Replace the battery compartment on the back of the unit by tightening the two screws RTS 2 Installation 1 Place the remote temperature sensor at a desired place by mounting the unit s hang hole RTS 1 on a screw screw not included Alternatively the unit can be place on a flat horizontal surface The unit can be placed indoor or outdoor The unit is weather proof Do not submerge unit in water Do not expose unit to water for prolonged periods Avoid accumulation of water and or snow on unit Avoid exposing unit to direct sunlight Remove unit from the exterior in extreme or harsh weather including but not limited to hurricane typhoon and cyclones seasons Do not place the unit in area of high winds Do not place the remote temperature sensor more than 30 meters 98 feet from the receiving weather station The remote temperature sensor is most effective if there are no obstruction and interfere
11. toggle between AM PM and 24 hour clock Press MODE SET button 3 again Press RCC button 4 or C F button 5 to change the hour setting Press MODE SET button 3 again Press Press RCC button 4 or C F button 5 to change the minute setting Press MODE SET button 3 again Press RCC button 4 or C F button 5 to change the year setting Press MODE SET button 3 again Press RCC button 4 or C F button 5 to change the month date and date month setting Press MODE SET button 3 again Press RCC button 4 or C F button 5 to change the month setting Press MODE SET button 3 again Press RCC button 4 or C F button 5 to change the date setting Press MODE SET button 3 again Press RCC button 4 or C F button 5 to change the weekday language setting ENG for English GE for German IT for Italian FR for French NE for Dutch ES for Spanish DA for Danish Press MODE SET button 3 again to confirm settings Display will no longer flash To see alarm time Press MODE SET button 3 once and alarm time 1 will be shown as indicated by AL Press MODE SET button 3 again and the current time will be shown To set alarm time Press MODE SET button 3 once and alarm time will be shown as indicated by AL Press and hold MODE SET button 3 for approximately 3 seconds until the digits flash Press RCC button 4 or C F button 5 to change the hour setting
12. zard e Never attempt to recharge the batteries in any other methods e Dispose the unit legally e Recycle when possible Specifications Indoor temperature range 0 C to 50 C 32 F to 122 F Outdoor temperature range 20 C to 50 C 4 F to 122 F Relative humidity range 20 95 Barometeric pressure range 930 mb to 1050 mb Power 3 x AAA Micro 1 5V batteries Consideration of duty according to the battery law Old batteries don t belong to domestic waste because they could cause damages of health and environment End user are committed by law to bring back needed batteries to distributors and other collecting points
Download Pdf Manuals
Related Search