Denon DHT-S514 soundbar speaker
Contents
1. 51 x 127 mm HHRT drivers x 2 Low Frequency Drivers 5 15 64 133 mm woofers x 2 Dimensions H x W x D Sound bar Subwoofer 3 9 64 x 39 17 32 x 3 5 64 79 8 x 1004 x 78 3 mm 12 21 64 x 6 3 4 x 13 5 8 313 x 171 5 x 346 mm Wireless Technologies Bluetooth 2 1 EDR A2DP APT X 2 4 5 2 5 8 GHz triband frequency hopping subwoofer Rating Voltage AC 120 V 60 Hz Power consumption Sound bar DC 24V 2 5 A 0 5 W or less Standby Subwoofer 60 W Weight Sound bar 5 Ibs 1 oz 2 3 kg Subwoofer 13 Ibs 5 9 kg Specifications are subject to change without notice Trademark information DOLBY XY DOLBY erat PROON Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by D amp M Holdings Inc is under license Other trademarks and trade names are those of their respective owners SS dts Digital Surround Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS Digital Surround and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved apt RA CSR 20132. Avoid using outlets that are connected to switches or dimmers No sound e Is DHT S514 s volume turned up Don t laugh we do this one ourselves all the time Is DHT S514 muted if so the front panel Mute key mX LED will be flashing e Is the DHT S514 set to the correct source A flashing Bluetooth key LED on the front panel indicates DHT S514 is trying to pair to Bluetooth press the Television Input key LJ to interrupt this and switch to television sound e Is the audio source a volume controlled television or cable satellite box output If so you must turn up the volume of the television or cable satellite box to send adequate signal level to DHT S514 For this reason it is best to choose fixed level outputs where possible some televisions have separate physical outputs other employ on screen menu settings to manage this e Check connections remember that DHT S514 auto prioritizes multiple incoming signals selecting HDMI optical digital coaxial digital and analog mini plug in that order Confirm that the television is routing audio to the appropriate output there may be TV menu settings to manage this No subwoofer sound sound interrupted or noise occurring e Check that the Status LED is lit in green on the subwoofer When the Status LED is flashing in red disconnect from the wall outlet and then reconnect to it or try to pair again page 12 Pairing the sound bar and subwoofer e When there is an obstacle b
3. 12 IR BLASTER OUT HDMI Input connects to the HDMI equipment with an HDMI cable HDMI Output ARC connects to the TV with an HDMI cable Compatible with the ARC function Service Port for service only do not use IR Blaster Output connect the supplied IR Blaster here See Locating DHT S514 Components IE page 4 for more information Pair Button Pre paired at the factory See Pairing the sound bar and subwoofer IS page 12 for more information Power Input connect the power supply cable here Coaxial Digital In RCA jack connects to television s coaxial digital audio Optical Digital Input S PDIF connects to television s optical digital out Analog In 3 5 mm mini plug stereo connects to television s rear panel audio out Subwoofer Rear Panel 18 19 20 21 Power Input connect the supplied power cable here Subwoofer Volume Adjusts the volume of the subwoofer for best balance with the sound bar Pair Button Pre paired at the factory See Pairing the sound bar and subwoofer IS page 12 for more information Status LED DENON pbut s514 ACIN SUBWOOFER VOLUME l Q PAIR N O O MIN MAX 18 19 2021 Locating DHT S514 Components The sound bar of the DHT S514 should be place as close as possible to the television screen It should be centered left to right with the screen and ideally no more than a few inches above or below The most common locat
4. CSR plc and its group companies The aptxX mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions HOM The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Adobe the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries DENON www denon com D amp M Holdings Inc 3520 10274 00AD
5. a DVD Blu ray player or cable satellite tuner will automatically play through DHT S514 Television rear panel DHT S514 Sound Bar DIGITAL AUDIO DC IN COAXIAL OUTPUT ron DIGITAL IN COAXIAL DIGITAL IN OPTICAL ANALOG IN Digital coaxial cable not supplied Analog Input Fifth Choice If your television has no digital audio outputs connect its analog stereo audio output using the supplied 3 5 mm stereo cable to the analog input of the DHT S514 The analog outputs of most televisions are dual RCA jacks typically red for right and white or black for left Use the supplied adaptor to connect those outputs to the 3 5 mm stereo cable Television rear panel AUDIO OUTPUT RCA to 3 5 mm Adaptor supplied 3 5 mm Stereo Cable supplied DHT S514 Sound Bar DCIN DIGITAL IN COAXIAL E O ANALOG IN Connecting DHT S514 to your HDMI equipment You can play back from a device that has a HDMI terminal such as a Blu ray disc recorder or game console HDMI equipment rear panel HDMI OUTPUT SF B m Power Connections HDMI cable not supplied HDMI OUT ARC l TO TELEVISION SERVICE IR BLASTER OUT Connect the sound bar power supply and power cord to the sound bar power input Connect the subwoofer power cord to the subwoofer power input The wireless subwoofer connects to the sound bar automatically DHT S514 Sound Bar DC I
6. disc recorder or game console using a HDMI cable to transmit high resolution digital video signals and Blu ray disc audio signals ARC Audio return channel function The TV audio can be played back through this unit using the HDMI cable used to connect this unit to the TV 1 1 The TV also needs to be compatible with the ARC function HDMI control function You can switch off the power switch input source and adjust the volume of this unit using the TV 2 remote control 2 The TV also needs to be compatible with the HDMI control function This function may not operate due to connected devices or settings Setting the HDMI Control Function When the connection to the TV is the same as or enable the HDMI control function on the TV If the TV is compatible with the ARC function enable the ARC function on the TV See the TV Owner s Manual for details Disable Your Television s Speakers When the connection to the TV is the same as disable your television s built in speakers when using DHT S514 Usually this is done Wu with an on screen setup menu on your television Look for an Audio or Sound sub menu and a Speakers Off Disable Speakers External Speakers or similar menu item Some televisions have a switch on the rear panel to disable the built in speakers Setup TV Speaker On HOff S Don t leave the television speakers on so that both systems play simultaneously this
7. subwoofer range is 8 meters Wireless subwoofer can be positioned vertically or horizontally Attach the supplied non slip stickers to the subwoofer Note Don t put the subwoofer where curtains or furniture will block the sound The port on the back of the subwoofer cabinet should be unobstructed Wall Mounting The DHT S514 sound bar can be wall mounted using the integrated keyhole mounts A mounting template can be found in the product carton Using a level position and tape the template to the wall in the desired location Install hardware using the template as a guide and then remove the mounting template from the wall Connect the audio and power cables prior to mounting the sound bar on the wall Consult a person knowledgeable about your wall type to recommend suitable hardware for hanging the speaker Po Wall Mounting Keyholes Note To ensure safety request a contractor perform the mounting work when mounting onto a wall In order to use the unit safely do not place items on or hang items from the unit Be sure to fix connection cables to the wall to ensure that cannot be pulled or tripped over causing the unit to fall Check that the unit is mounted safely after the mounting work is complete Also periodically check the safety of the unit and whether there is a possibility that the unit may fall Denon cannot accept any responsibility for damage injury or accidents caused by problems with the mounting location or moun
8. 514 commands each associated with a front panel button as you wish Note Rapid blinking of the two LEDs indicates a failed learn Press any other front panel or DHT S514 remote key to reset learning and start again See the Troubleshooting section S page 13 for tips to help you successfully teach DHT S514 to recognize the signals from your remote control Once you have programmed DHT S514 to respond to your everyday remote controller you may wish to put away the DHT S514 remote for safekeeping If you do we recommend that you remove the battery and wrap it in a slip of paper masking tape or similar to prevent accidental discharge and put it and the DHT S514 remote someplace safe Some remotes can learn by pressing the remote key several times up to four times Pairing the sound bar and subwoofer The subwoofer and sound bar are paired at the factory However if the communication is interrupted follow this procedure 1 Press the Pair Button on the subwoofer until the Status LED flashes red rapidly 2 The sound bar power is turned on Press the Pair Button on the back of the sound bar The Status LED on the subwoofer will be solid green Status LED Red LED Subwoofer not paired to or searching for sound bar Green LED Subwoofer is paired to sound bar Your system is ready Troubleshooting DHT S514 DHT S514 Does not power on e Is the DHT S514 plugged into a proven live wall outlet Try a lamp or other known good appliance
9. DENON DHI S514 Sound Bar and Wireless Subwoofer System Contents Introduction Accessories Sound Bar Controls Sound Bar Rear Panel Subwoofer Rear Panel Locating DHT S514 Components Wall Mounting Connecting DHT S514 to your television Setting the HDMI Control Function Disable Your Television s Speakers HDMI Input ARC First Choice HDMI Input without ARC Second Choice Digital Optical Input Third Choice Digital Coaxial Input Fourth Choice Analog Input Fifth Choice Connecting DHT S514 to your HDMI equipment Power Connections The DHT S514 Remote Control About DHT S514 s Automatic Power Modes without the HDMI cable About the DHT S514 Control Button LEDs Adjusting the subwoofer level Volume Change Indication Listening Modes Night Mode Using Bluetooth Use Any Remote to Control your DHT S514 Pairing the sound bar and subwoofer Troubleshooting DHT S514 Specifications Trademark information Owner s Manual Introduction Thank you for choosing Denon Modern flat panel televisions are wonders of digital video but leave little room for serious sound reproduction Denon s DHT S514 home theater sound bar speaker system will envelop you in rich room filling sound Simple to set up and easy to use the DHT S514 transforms any TV into a home entertainment system delivering truly wide range response including deep bass from the wireless subwoofer and clear mids and detailed highs from the mu
10. N DIGITAL IN COAXIAL DIGITAL IN OPTICAL ANALOG IN Subwoofer DENON obit ss14 The subwoofer power switches on when the subwoofer power plug is inserted into the wall outlet The PAIR LED on the back of the subwoofer flashes red Connection with the subwoofer starts when the sound bar power is turned on The PAIR LED lights green when connection to the subwoofer has completed Note f the LED does not light green see page 12 The DHT S514 Remote Control A remote control is supplied with DHT S514 Its keys duplicate DHT S514 s front panel buttons E amp page 3 Sound Bar Controls with one addition Day Night and one deletion the Learn key Power on standby Select TV HDMI input Selects the Bluetooth wireless audio input Volume up Selects the Listening Mode Day Night toggles Night Mode on and off I page 11 Listening Modes Volume down Mute Note Don t forget to insert the supplied battery into your remote control Remember you can use your television or cable satellite box remote DENON to operate DHI S514 10 Beat see the Use Any Remote to Control your a DHT S514 ts page 12 lt gt A CR2025 Note e Use lithium batteries in the remote control e Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit The supplied batteries are only fo
11. N ey al SERVICE en g IR BLASTER OUT teams HDMI cable supplied Digital optical cable supplied Example When the audio output on the TV is an analog output Television rear panel DHT S514 Sound Bar AUDIO HDMI omn a OUTPUT INPUT COAXIAL HDMI OUT ARC E AA ae AR SERVICE 4 ANALOG IN IRBLASTER OUT RCA to 3 5 mm Adaptor supplied HDMI cable supplied 3 5 mm Stereo Cable supplied Digital Optical Input Third Choice Use the supplied digital optical cable to connect your television s optical digital output to DHT S514 s Optical Digital Input Other components connected to the television such as a DVD Blu ray player or cable satellite tuner will automatically play through DHT S514 Television rear panel DHT S514 Sound Bar DC IN DIGITAL AUDIO ea OPTICAL OUTPUT COAXIAL DIGITAL IN OPTICAL ANALOG IN Digital optical cable supplied The optical connector looks square but it is keyed and will only plug in one way don t force it Digital Coaxial Input Fourth Choice If your television doesn t have and ARC equipped HDMI output or an optical digital output it will probably have a coaxial digital output Use an RCA type cable not supplied to connect your television s coaxial digital audio output to DHT S5 14 s Coaxial Digital Input Other components connected to the television such as
12. bove Make sure DHT S514 is not paired to a different Bluetooth source device Make sure your desired Bluetooth source device is actually playing music or another audio program and is paired to DHT S514 and not some other device On a multifunction source device such as a tablet or mobile phone not every program or app may support Bluetooth audio broadcast consult the instructions for the program or app Consider possible sources of interference particularly those operating at 2 4 GHz Wi Fi routers microwave ovens landline cordless telephones power down suspects one at a time to identify a culprit Often repositioning an interfering device to another room or even across the room will restore Bluetooth function DHT S514 takes several seconds to turn on e The DHT S514 s power saving design puts the unit into standby mode after five minutes of no sound DHT S514 takes a few seconds to start up the next time audio plays Factory reset Unplug sound bar from wall Hold down Vol minus button Plug into power again Standby button light will blink fast for several seconds indicating that the system has been reset Clears Bluetooth pairing remote learning audio mode Specifications Rated output Sound bar 10W 10 W 4 O ohms 200 Hz 0 7 T H D Subwoofer 49 W 4 O ohms 60 Hz 0 7 T H D Frequency Range 40 Hz to 20 kHz High Frequency Drivers 35 64 14 mm tweeter x 2 Mid Frequency Drivers 2 1 64 x 5
13. ct to sound bar power input Your power supply may look different depending on where you live The AC adapter and the power cable are packaged separately 7 ME 8 IR Blaster cable connect to sound bar IR Blaster Output l 9 Sound Bar for foot 19 mm 31 mm Two sets of two 8 10 Non slip stickers for subwoofer 4 stickers on one sheet 9 OO QO 11 CD ROM Owner s Manual 12 Quick Start Guide 13 Mounting Template CD 10 11 14 Safety Instructions 15 Notes on radio 13 Sound Bar Controls 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Loe lials Li lele l n a Power on standby Television HDMI Input select to watch television or connected HDMI equipment Bluetooth wireless input select for Bluetooth pairing or playback Remote Learning engages remote control learning Listening Mode changes Listening Mode stepping through the three modes in sequence Mute sound Press to mute the audio press again to unmute Pressing either Volume key also unmutes Volume down Decreases the volume Press and hold to continually decrease the volume Volume up Increases the volume Press and hold to continually increase the volume Sound Bar Rear Panel 9 10 11 12 13 14 15 16 17 9 Hom IN Dein 14 o DIGITAL IN COAXIAL 15 HDMI OUT ARC asics _ ane O 10 d TELEVISION mar a DISTT AN pit6 O 11 SERVICE ANALOGIN 17
14. etween the sound bar and the subwoofer remove it or place the subwoofer closer to the sound bar Distorted sound from the DHT S514 e Ifthe signal source is a volume controlled output turn it down a couple of steps from maximum e Check the signal source to be sure the distortion is not originating there e If DHT S514 s volume is set to its maximum turn it down a few steps Trouble teaching DHT S514 remote control commands e Make sure the source remote is working properly in the first place check batteries confirm direct operation e Move the DHT S514 and source remote out of bright sunlight or powerful room lighting too bright light will impede infrared signal transmission e Be sure to hold the source remote steady 0 3 0 5 m in front of the DHT S514 on its level with the remote s IR emitter usually a smooth black plastic area across the end you point toward the television aimed straight and level at the center of DHT S514 s front panel e Press and release source remote keys deliberately hold each keypress down for a half second or so and pause a second between repetitions e Remember that while DHT S514 can learn almost all IR infrared remote commands there remain a few rare code formats that cannot be taught much like some engineers we know Television speakers keep getting turned back up e Disable the television s speakers usually a setup menu option but a rear panel switch on some televisions If this is not po
15. ion is below the screen Sometimes this location can be difficult because the base of the TV gets in the way The DHT S514 has two sets of feet 19 mm and 31 mm high that raise the sound bar off the shelf for a more stable and attractive installation when used with this type of television Note Depending on your TV model or installation location the remote control receiver on the TV may be hidden by the sound bar preventing the remote control from being used because the remote control signals cannot reach the TV In this case connect the supplied IR Blaster Attach the tip of the IR Blaster near the TV remote control signal receiver and check that the remote control can be used to control the TV Remote control sensor of the TV OS HDMI IN f HDMI OUT ARC O TO TELEVISION SERVICE IR BLASTER OUT IR Blaster cable supplied You may also place DHT S514 sound bar on a shelf or furniture above or below the screen It should be centered with the screen and ideally no more than a few inches above or below The system will usually sound best when the front of the sound bar is close to or flush with the front edge of the furniture or shelf on which it rests This reduces unwanted sound reflections Place the wireless subwoofer anywhere in the room For the best sound place the subwoofer near a wall or corner within 6 meters of the sound bar and on the same side of the room as the sound bar The wireless
16. ither Listening Mode key e gt front panel or remote Each keypress advances in sequence through the three modes Dialog Music and Movie DHT S514 s front panel key LEDs momentarily display a pattern representing each newly selected mode The following information describes the various listening modes and shows an illustration of the LED pattern displayed when that mode is selected Note The LED displays used to indicate the various Listening Modes are simple horizontal display patterns there is no correspondence between the lit LEDs and their underlying key functions Dialog mode highlights center recorded sounds such as movie dialog television announcers o Tofa HET x TF or musical soloists it is valuable for everyday television viewing Music mode widens the Soundstage somewhat Coe RoE i e ENE for a more enveloping involving sound Lo FHR jz Movie mode deploys DHT S514 s maximum Al AN i i oade Ae WY PW 2 processing for the biggest possible sound on 0 Zi E S 2 action films or other large scale content 1 5 Night Mode Night Mode improves low volume listening by subtly lifting softer sounds and lowering very loud ones While you may use Night Mode whenever you like for maximum dynamic realism from television programming movies or music leave night mode turned off A 7 To engage Night Mode press the Day Night button pA on the remote control press or
17. lti driver high fidelity sound bar Simply connect it to your television and enjoy powerful dynamic audio from your favorite TV shows movies games and music DHT S514 s inputs adapt to any television or system arrangement The DHT S514 also accepts wireless Bluetooth streaming for convenient audio playback from mobile devices An ingenious remote control learning solution lets you continue using your familiar television or cable satellite remote We ve worked hard to make DHT S514 the best performing product of its kind and just as diligently to ensure it is the simplest to set up and easiest to use You re about to hear just how much you ve been missing but first please take a few moments to review this brief manual You probably think it is not really necessary but doing so will help you get the most from the DHT S514 Please save your original shipping carton and packing materials If you need to move or ship the DHT S514 this is by far the safest way to do so Accessories 1 Remote Control remote control with battery 2 Subwoofer Power Cable connect to subwoofer power input 3 HDMI Cable best choice for connecting ARC equipped HDMI televisions 4 Digital Optical Cable best choice for connecting digital audio sources to 1 DHT S514 5 3 5mm Stereo Cable for connecting a source to the Analog Input 6 RCAto 3 5 mm Adaptor adapts a left right RCA output to a stereo 3 5 mm output 7 Sound Bar Power Supply conne
18. press and hold the front panel Listening Mode button lt lt for three seconds When Night Mode is engaged the LED pattern for the current Listening Mode dimly lights To exit Night Mode use the same buttons in the same way When DHT S514 exits Night Mode the LED pattern for the current listening mode brightly lights Using Bluetooth DHT S514 can stream music wirelessly via Bluetooth from any compatible Bluetooth device such as a mobile phone tablet or laptop computer Pairing Your Bluetooth Device Before you can stream Bluetooth audio to DHT S514 you must pair your device to DHT S514 To pair the device to the DHT S514 for the first time 1 Press and hold the Bluetooth key front panel or remote for at least 3 seconds the Bluetooth LED will begin to flash rapidly 2 Go to Bluetooth settings on your device Make sure the device s Bluetooth feature is set to on 3 From the Bluetooth list on your device select DHT S514 4 Playback audio on the Bluetooth source you should now hear audio from the DHT S514 DHT S514 s Bluetooth key LED will remain on as long as DHT S514 s Bluetooth input is selected and active DHT S514 can pair multiple Bluetooth devices however only one can play at a time First come first served One Bluetooth Source will need to be disconnected before another paired device can play Use Any Remote to Control your DHT S514 It s easy to teach DHT S514 to respond to nearly any conventional IR infra
19. r verifying operation Replace them with new batteries at an early date e To prevent damage or leakage of battery fluid e Do not short circuit disassemble heat or dispose of batteries in flames Do not keep the battery in a place exposed to direct sunlight or in places with extremely high temperatures such as near a heater e If the battery fluid should leak carefully wipe the fluid off the inside of the battery compartment and insert new batteries e Remove the batteries from the remote control unit if it will not be in use for long periods Used batteries should be disposed of in accordance with the local regulations regarding battery disposal About DHT S514 s Automatic Power Modes without the HDMI cable DHT S514 will automatically wake up whenever any of its wired inputs receives an audio signal Simply turning on your television will also turn on DHT S514 For Bluetooth playback you will need to turn on DHT S514 manually using the remote control or top panel power button Because of DHT S514 s power saving design the system takes five to seven seconds to turn on from standby Pressing either the front panel Television Input LJ or Bluetooth keys will also power up the DHT S514 Press the Power key again to return DHT S514 to its low power standby mode DHT S514 will automatically return to standby after five minutes of not receiving an audio signal Note Except the HDMI connection For the HDMI connection the HDMI con
20. red remote so that you may continue to use your favorite television or cable satellite You may prefer to teach DHT S514 only selected commands to avoid unintentional operations and subsequent confusion among some household members Some DHT S514 owners teach only Volume Up Down and Mute relying on the DHT S514 s front panel or DHT S514 s own remote for other functions Learning commands using Volume up as an example 1 Press and hold the front panel s Learn button Bi for 3 seconds its key LED will flash slowly 2 Now press the front panel Volume up key the Volume up key LED will also commence flashing slowly in sync with the Learn LED 3 Within 60 seconds aim the source remote for example the television handset from approximately 0 5m directly toward DHT S514 s front panel and press its Volume up key 4 times in slow succession both flashing DHT S514 LEDs will now light steadily for 3 seconds indicating a successful learn Unlearning commands z 1 Press and hold the front panel s Learn button g for 3 seconds its LED will flash slowly 2 Press the button you want to clear the button s LED will also flash slowly in sync with the Learn LED 3 Press the learn button g within 60 seconds both LEDs will flash rapidly for 3 seconds The command has been unlearned Seven of the eight DHT S514 front panel buttons can be taught to respond to an external remote Simply repeat this three step process for as many of the other DHT S
21. ssible the problem is likely that the television responds to press and hold ramping volume commands more quickly than the DHT S514 in this rare case use DHI S514 s front panel or supplied remote to turn the DHT S514 s volume up Trouble Pairing Bluetooth e Make sure DHT S514 is in Bluetooth pairing mode Bluetooth key LED should be flashing e Make sure your Bluetooth source is in Bluetooth pairing mode see the source s instructions e Bluetooth source device must support A2DP Advanced Audio Distribution Profile some Bluetooth products some tablets some GPS units for example will thus work with Bluetooth keyboards or headsets but are not capable of high fidelity audio playback e Keep your Bluetooth source within 3m of DHT S514 while pairing e Power cycle the Bluetooth device complete power off and hard reboot and try to pair again Bluetooth connection problems If a Bluetooth fault occurs the device moves out of range or stops playing due to low battery or user input DHT S514 s Bluetooth LED again blinks rapidly the DHT S514 will automatically attempt to re connect and will resume playback when the Bluetooth source is in range Note On some devices you will need to press play again Bluetooth s effective wireless range varies with the source 9 12 m is typical If the source moves out of range DHT S514 will continue trying to re connect it for 4 minutes after that interval you will have to re connect as a
22. ting method Connecting DHT S514 to your television DHT S514 can be connected to your system one of five ways In order of preference they 1 First Choice HDMI Input ARC If your television has an ARC audio return channel HDMI connector connect it to one of the HDMI Input of the DHT S514 This will provide the best sound and several other benefits 2 Second Choice HDMI Input without ARC Connect to a TV that is not compatible with the ARC audio return channel function using the HDMI cable and audio input cable 8 3 Third Choice Digital Optical Input S PDIF A digital optical cable connection from the television also provides excellent sound 4 Fourth Choice Digital Coaxial Input RCA jack Another way to supply a digital audio signal to the DHT S514 Fifth Choice Analog Input 3 5 mm stereo mini plug You can enjoy the sound of the DHT 5514 with equipment that doesn t have digital signal outputs by connecting them to the analog input All five inputs are all selected by the television button on DHT S5145 front panel or remote but which is active is determined by auto priority If only one input is receiving a signal that input will play If more than one input is receiving a signal the order of priority is HDMI Digital Optical Digital Coaxial and Analog HDMI Connection You can enjoy high quality audio and video playback by connecting this unit and a TV or this unit and a device such as a Blu ray
23. tly lit when selected The Bluetooth LED will flash bright slowly while attempting to re pair a device that has passed out of range or otherwise lost wireless contact and blink rapidly to indicate a Bluetooth error unable to pair This will stop after 60 seconds or if any DHT S5 14 key is pressed Learning Flashes when learning functions from your remote IS page 12 Use Any Remote to Control your DHT S514 Listening Mode Flashes once when pressed at the front panel and selects the next Listening Mode page 11 Listening Modes Gy lew Mute Flashes bright continuously as long as Mute function is invoked Adjusting the subwoofer level SUBWOOFER Use the Subwoofer Volume control on the rear of the subwoofer to adjust its sound output level In many rooms setting between 10 and 2 o clock will sound good Once set you typically won t need to adjust this control MIN MAX Volume Change Indication When you adjust DHT S514 s volume from the remote control the 8 front panel LEDs momentarily function as a horizontal bar graph of the volume setting reached illuminating from 1 to all 8 buttons the latter indicating maximum volume Listening Modes DHT S514 includes three Listening Modes for different kinds of audio programs room acoustics or personal preferences It also has a special Night Mode which enhances low volume listening which is described in the following section Select a Listening Mode using e
24. trol is activated page 5 Setting the HDMI Control Function If you wish to change this auto on behavior you may switch between the standard automatic wake up standby mode and a manual power on standby mode To change from one to the other press and hold the front panel Power key for three seconds The power key LED will flash bright for three seconds then illuminate steadily for three seconds and then turn off indicating you have changed to manual power mode Each time you repeat the Power key press and hold it will change to the other mode In manual power mode the DHT S514 is turned on or standby with a momentary press of the Power key About the DHT S514 Control Button LEDs The eight LEDs illuminating the top panel control buttons flash or light in various patterns to indicate different functions Power Momentarily bright when the DHT S514 is turning on waking from sleep dimly lit while on awake operating mode off when the DHT S514 is asleep in standby mode flashes when toggling between manual and auto on standby modes TV HDMI Input Switches the audio input of the DHT S514 The input switches between TV Input and HDMI Input each time the button is pressed The button LED flashes twice when the input is switched to TV input The button LED flashes 4 times when the input is switched to HDMI input i Al Bluetooth Input Flashes bright rapidly while Bluetooth is pairing a wireless device brigh
25. will not yield sound that is louder or better HDMI Input ARC First Choice If your television has an ARC audio return channel HDMI connector connect it to one of the HDMI output of the DHT S514 with the supplied HDMI cable Often with televisions that have multiple HDMI connectors the number one HDMI connector will be the one equipped with ARC Note The TV also needs to be compatible with the ARC function Turn the TV HDMI control function on See the TV Owner s Manual for details Television rear panel DHT S514 Sound Bar HDMI INPUT Hom IN ARC i HDMI OUT ARC OC TO TELEVISION ii SERVICE nS Oo IR BLASTER OUT HDMI cable supplied HDMI Input without ARC Second Choice When connecting to a TV that is not compatible with the ARC function connect the TV to HDMI output on this unit using the supplied HDMI cable You can also playback the TV audio on this unit by connecting the TV to audio input either digital optical cable supplied digital coaxial cable not supplied or 3 5 mm stereo cable supplied Note The TV audio cannot be played back on this unit when it is only connected with the HDMI cable Example When the audio output on the TV is a digital optical output Television rear panel DHT S514 Sound Bar DIGITALAUDIO HDMI INPUT Hom IN g DC IN OPTICAL OUTPUT Zy DIGITAL IN COAXIAL HDMI OUT ARC DIGITAL IN TO TELEVISIO
Download Pdf Manuals
Related Search