Home

Buffalo LinkStation 220

1. gt Status Enabled On Folders 2 fo DLNA Server gt Status Disabled Off d USB Device gt e USB Drive Connected 0 2 GB 3 7 GB Ut Advanced Settings 3 Move the print server switch to the on position to enable the print server Print Server Print Server On a 4 Tap Apply then OK 80 Email Notification Your LinkStation can send you email reports daily or when settings are changed or an error occurs Notification emails may be triggered by any of the following events e Scheduled hard drive status notification includes quota exceeded notification Fan error LS220D and LS220DE only e Backup job completed e Hard drive read error 1 In Advanced Settings click Management 7X Management 2 Move the email notification switch to the position to enable email notification EM Email Notification On 3 Click f to the right of Email Notification 4 Click Edit a 5 Enter your mail server settings and choose what events will trigger notification Click OK to send a test email SMTP Server Address SMTP Port 25 Authentication Type Dmb POP3 Server Address POPS Port 110 SSL TLS Disable isl Usernarne Password Subject LinkStation Status Report System V HDD status report 00 v Hour Fan error Disk error Backup complete 81 Salact tom List Sleep Mode To save energy you can specify times
2. Selek A Unceteek aa Clore 12 Click Edit 1 3 Enable Access Restrictions Access Restrictions Enable Disable 1 4 Click on External Users tab and select the level of access for each external user BAI Read and write access allowed l Read access allowed Access prohibited 15 click ox Notes Users that are automatically registered belong to the hdusers group They can be added to other groups from within groups settings Added users will be listed in Users External Users To delete a user that was registered automatically select that user and click Delete External User If both read only and read amp write permissions are given to a user the user will have read only access The most restrictive attribute will apply e To access access limited shared folders from OS X 10 7 use AFP instead of SMB Enable AFP Mac under LAN Protocol Support on the destination folders to use AFP e If access restrictions are set for users and groups from the authentication server guest and anonymous connections will not be possible with AFP connections e FTP connections do not support authentication with an external SMB server e If using a Windows PC for external authentication the default Windows SMB security settings may need to be changed An easy way to do this is to run the File Sharing Security Level Change Tool available from this product s download page on www buffalotech com This utility will let
3. underscores _ periods and symbols amp amp 5 Se Note You can open this same screen by clicking Getting Started from Easy Admin Al Enter the new password twice then click Next Note The default username and password are admin and password To keep the defaults leave both fields blank and click Next 5 Configure levels of sharing for all existing shared folders public or private to complete the initial setup wizard u Getting Started Shared Folder Setup Shared Folder List face chant Cerner pter gt ote Amel repond Li sure 2 Aayi Select a sharing kwel for your fodder share Set af public folder dee Cee pica Pen Coker Rangeela For harra ibb gud veld mcis pier eel aea Pope Set ia parit folder i ely Papaka wears cms appia hin oiir Bajpai tar gcns baira crum Em ined prc thee III lt NLCNN Notes Select Set as private folder to restrict access to the folder to specific users e Click Create Shared Folder to create a new shared folder from the wizard By default SMB and AFP connections can be used to access this folder 6 Click OK when the following message is displayed Note Ep All shared folders are configured Installing Applications NAS Navigator2 1 Insert the LinkNavigator CD into your computer You can also download the latest LinkNavigator from Buffalo s website LinkNavigator will launch 2 Click NAS Navigator2 Install 3 Follow the sc
4. 1 Open Settings and tap the blinking red information icon r g BUFFALO 1e fi amp Or Ov Ov I 5 Users gt Number of Users 2 W Folder Setup gt Number of Folders 1 xy WebAccess Status Disabled On Folders 0 Fol DLNA Server gt Status Disabled OH 2 Tap Recover RAID Array View Status Error The drive has failed Replace the drive Drive 2 Note The system is running in degraded mode because of the condition of one or more arrays An error occured on RAID array 1 Recover RAID Array system Information Name LS220DC16 DTCP IP Firmware Version 1 42 0 29 Serial Number IP Address LAM Port 1 192 168 10 25 MAC Address LAM Port 1 00 50 43 F5 2C 16 Workgroup WORKGROUP 47 3 Check the status of the drive that failed Follow the instructions to shut down the LinkStation Wy Recover RAID Array An error was detected in the drive to be used in the RAID array Replace the defective drive before RAID recovery RAID RAID array 1 RAID 1 Shut down the LinkStation and replace drive 2 with a new drive Q Drive Harmnal A Drive 2 Error Shutdown Move the power switch to Off Wait until the power LED shuts off completely before replacing the drive Back to Home Squeeze the left side of the front panel and swing it open Push the failed drive s cartridge up and remove it from the Link
5. St Webaccess EA 3 Select the level of access for each shared folder from the drop down list Target Shared Folder Level of Access usbdisk 1 No remote access i share No remote access p No remote access Allow access to anyone BuffaloNAS com Name Only registered groups and users Sync with shared folder settings Al Enter a BuffaloNAS com name for your BuffaloNAS account BuffaloNAS com Name BuffaloNAS com name is a username to access your shared folder s via WebAccess Note The BuffaloNAS com name may contain from 3 to 20 alphanumeric characters underscores _ and 50 hyphens The BuffaloNAS com name is case sensitive 5 Click Apply 6 Continue with the procedure at http buffalonas com manual setup en Configuration from Advanced Settings Note Use compatibility mode to use WebAccess with Internet Explorer on Windows 8 and Windows 8 1 1 In Advanced Settings click File Sharing fm File Sharing 2 Click to the right of WebAccess E WebAccess _ ofF ip 3 Click Edit wetv ccess Settings HTTPS SSL Encryption Disabled BuffaloNAS com Registration Disabled Other DNS Service Hostname Automatic Router Setup UPnP Diti Extemal Port NAS Intemal Port 9000 Exclusive Session Disabled Session Timeout 30 minutes WebAccess URL Edit Close 4 Configure the desired settings then click OK WebAccess Settings e HTTPS5 5SL Encryption Enable Disable BuffaloNAS com Reg
6. Under some circumstances data from formatted drives can be recovered The disk erasure process in this section does a much more thorough job of erasing data This procedure is recommended for removing all data from a drive in a way that makes it nearly impossible to recover with current tools All data on the drives is completely erased The LinkStation will then be in the following state Both drives in JBOD e An empty shared folder on each drive e All settings returned to their default values Alllogs deleted 1 In Advanced Settings click Management Management 2 Click to the right of Restore Erase gt Restore Erase rm 3 Click Erase LinkStation Erase This will erase all data and settings and return the LinkStation to its factory defaults Erased data cannot be restored Several hours will be required for this process Erase LinkS tation Al The Confirm Operation screen will open Enter the confirmation number then click OK Confirm Operation JA Format Disk This action will erase all data on the disk and restore configuration settings to factory defaults Warning This operation cannot be canceled 690 3 Confirmation Number 5 All data on the LinkStation will be permanently erased Disk Quotas Disk quota will limit drive space for each user or group You can also configure alert space which will send a notification email when the drive space exceeded the alert space To spend a n
7. e To configure a password enter it in the Remote Backup Password field Leave this field blank if you don t want a password If the target or source device is configured with a backup password the folder will not be listed as a target or source device in the folder list unless the configured password is entered A backup password is not available when a new shared folder is created by a power user Backing up to a LinkStation or TeraStation on another network when connected by a VPN You can back up to a LinkStation or TeraStation on another network as long as the two networks are connected by a VPN Follow this procedure to enter the IP address or hostname of the target LinkStation or TeraStation 1 In Advanced Settings click Backup ot Backup 39 2 Click f to the right of Backup f Backup recu A 3 Click List of LinkStations and TeraStations Backup List Backup Password Sat List of LinkS tations and Teras tations Create Hew Job Delete Jobis Filter w Task Scheduled Day Time Operation Mode Status Select AI Unselect All Close 4 Click Add enter the IP address of the target LinkStation or TeraStation and click Close List of LinkStations and TeraStations e Detected LinkStations and TeraStations Refresh Filter x Name IP Address T55400D467 192 168 10 3 d L5420698 192 168 10 2 r L5410897 192 168 10 22 Off subnet Devices Add Delete Filter IP Address
8. users nogroup all none hdusers admin guest man www sshd administrator ftpuser apache mysql e Donotuse any of the following words as the name of a shared folder These words are reserved for internal use by the LinkStation info spool lost found global printers homes Ip authtest ram msdfs root mt daapd usbdisk where is a number for example usbdisk1 e Don t use the following unsupported characters in shared folder names workgroup names or filenames DXX GOXOXXX9X1000 2 3505190519190 I ILIV V VIVIVIIX X i ii div Y vi vivi b x mncnkameksccm No KK T OBOE SHA HAL SER tux ets domnk deu APA 55 0 dd p abf y mW t nM 2LA UMBIRESSEATEHMESERUR IZEBA Pe e ROR UR B nU ie UE B 8 7 L sah 2E BUE EAR SECURE as SER PL Meo PRASATA RARER UT p eS US Ego og SD DETENI TTS E ERI IS RUBUS Spe PADS PAESANI Se AGRA USE ARIES EA EASIER TEE nal SS 0g SRG DEBA RARE ART CO EERE RAO Vil DUSHP TET SEE rai RII B ABESSE GE aI LAGE VERE SEE A EA ICE YUNE E i ae ALE A Te E EEN eae 2 OL RS E EEEE 141278 PRON E E E 40 15004 047 908 TEET Aee a e O a O DTI E e File and folder names may contain up to 255 single byte characters e Configure hidden and read only file attributes in Settings Configuring them from within Windows is not supported and may cause unexpected behavior Folder and workgroup names whose names contain non Roman characters may not be displayed correctly If shared folders are accessed from a Maci
9. 1CH1 916 6 GB naB 0 00 XFS Disk 2 Normal ST1000DMO03 9 YMN1 916 6 GB GB O 00 XFS gt Close Al Click Check You have the option of deleting information files from Mac OS during the check if desired Check Disk Check Target Disk 1 El Delete Mac OS specific files Warning Before running the disk check check that the disk is nat set as a backup device Do nat run the disk check if the disk is set as a backup device Formatting Drives Note Under some circumstances data deleted when a drive is formatted can be recovered To ensure that data is gone forever a format might not be sufficient See the Erase Data on the LinkStation Completely section below 1 In Advanced Settings click Drives Drives L 2 Click Drives to format an internal drive or USB Drives to format an external drive mE Drives pj Wn USB Drives p 40 3 Select the drive to format then click Format Disk Drives IQ Check Disk Fenmat Disk Dsemount Disk Fuediscower Disk Disk Hame Stabus Model Name Unit Capacity Amount Used Used File System M a Disk i Normal STi000DMOO03 1CH1 916 6 GB naB D D0 XFS Disk 2 Normal ST1000DMO03 9YN1 916 6 GB GB 0 00 XFS Close Note If you connect an external drive to the LinkStation and the drive status is still shown as Unformatted refresh the status by clicking Rediscover Disk If the status doesn t change disconnect and reconnect the USB drive al Select a
10. In Settings click File Sharing fm File Sharing Click to the right of Folder Setup FA Folder Setup 2 Folder s vu Select the folder that you want to share with media players and other DLNA compatible devices Click Edit Under LAN Protocol Support check DLNA and click OK Click Close Click Services A Services Move the DLNA Server switch to the 93 position to enable DLNA IRB DLNA Server on jJ p Click amp to the right of DLNA Server 10 click Edit 1 1 Select an interval for DLNA server database updates and click OK DLNA Server Settings DLNA Client Access Permissions Automatic Update m Search for updates B Specify update interval Initialization of the Database a Keep current list Initialize Required 70 Configuration from a Mobile Device 1 In Settings tap DLNA Server BUFFALO itt al Not logged in fi amp Ov Or Ov JL Users gt e Folder Setup 53 WebAccess gt Status Disabled Off Oo O 574 DLNA Server Status Disabled Off w USB Device 2 Enable the shared folder for DLNA and tap Apply Oo O fof DLNA Server Configure shared folders to use via DLNA share Liniktytion folder On Playing Files To play back content from a DLNA compatible device 1 Connect the DLNA compatible device to the same network as the LinkStation and turn it on 2 Select the LinkStation in the software of the DLNA compatible device 3 Selec
11. LinkStation is a member server in an Active Directory domain and you change the authentication method to Workgroup the account on the domain controller will not be deleted automatically When the LinkStation joins an Active Directory domain FTP is disabled Before using FTP move the FTP switch back to the EE position Don t disable the SMB protocol while Active Directory is used for access restrictions If you do you will need to enable SMB again and reconfigure AD from scratch NT Domain In an NT domain environment the LinkStation uses account information from the NT domain server to set access restrictions for files and folders on the LinkStation There s no need to perform individual account management for the LinkStation If multiple LinkStations are installed on the network the account information is centrally managed in the NT domain greatly reducing the operations required for installation and management Note The LinkStation supports a domain environment with a maximum of 1000 domain users and 1000 groups 10 000 users and 10 000 groups can be downloaded from the domain controller but are not supported 1 2 Create an account on the domain controller for the LinkStation In Advanced Settings click Network f Network 3 Click Pf to the right of Workgroup Domain sa Workgroup Domain ee ma 27 4 Click Edit 5 Select NT Domain then click Next Workgroup Domain Settings Authentication
12. Note that only the first partition of a connected USB hard drive is mounted Additional partitions are not recognized 37 Note Hard drives formatted with NTFS exFAT ext3 or HFS will have read only access Dismounting Drives If the LinkStation is powered on dismount external drives before unplugging them You may dismount external drives with the function button or any drives from Settings If the LinkStation is off then all drives are already dismounted and may be unplugged safely Note If you unplug your external drives without dismounting them Settings may still show usbdisk in File Sharing Folder Setup Reboot your LinkStation to clear it Dismounting with the Function Button If the LinkStation is on hold down the function button for 3 seconds The white function LED will go out as all attached USB drives are dismounted You may now unplug them safely Dismounting from Settings on a Computer 1 In Advanced Settings click Drives _ we Drives 2 Click to the right of USB Drives BL USB Drives my 3 Select the drive to dismount and click Dismount Disk Al The Confirm Operation screen will open Enter the confirmation number and click OK USB Drives Check Disk Format Disk Dismount Disk Retesh Disk Mame Status Model Mame Unit Capacity Amount Used Used File System Manufacture amp USEDiki Norma DT 100 G2 317GB 0 1GB 4 79 FAT32 Kingston 4 T t Diosa 5 When the following m
13. a steady amber a new firmware version is available Update the firmware to the newest version Default Settings Administrator s Name cer faster eae for both Windows and Mac computers The recycle bin is enabled on share by default Normally the LinkStation will get its IP address automatically from a DHCP server on the network If no DHCP server is available then an IP address will be assigned as follows DHCP Client IP address 169 254 xxx xxx xxx is assigned randomly when booting the LinkStation Subnet mask 255 255 0 0 Registered Grouse Me admin and guest are default groups and cannot be edited or Microsoft Network Group Setting WORKGROUP Ethernet Frame Size 1500 bytes not including 14 bytes of header and 4 bytes of FCS Specifications Check www buffalotech com for the latest product information and specifications 99 File Sharing SMB CIFS AFP FTP FTPS HTTP HTTPS HTTP HTTPS Wet 00 1500 4084 7404 and 9216 byte modes are Jumbo Frames supported not including 14 bytes of header and 4 bytes of FCS USB 2 0 Port Series A x 1 Note Compatible USB devices include printers and Buffalo USB hard drives If a hard drive in your LS220D and LS220DE malfunctions replace it with a Buffalo OP HD LS series of the same or more capacity available from www buffalotech com LS210D 45 x 128 x 205 mm 1 8x 5 0 x 8 1 in LS220D 87 x 128 x 205 3 4 x 5 0 x 8 1 in LS220DE 87 x 128 x 205 3 4 x 5 0 x 8 1
14. and time to run Backup Job Settings Name Schedule Wot scheduled wv Date and Time Sunday 0 Hou 0 Minutes Operation Mode Normal backup w Options Create backup log file F Encrypted data transfer Compress and transfer Ignore backup errors and continue backup job on schedule Do not back up recycle bin aaa Delete Filter x Backup Source Folder Name Backup Target Folder Name Select An Unselect an LinkS tation and TeraStation List Update Backup Target MAS List OK Note The following types of backup jobs may be selected Files Included Normal backup All files in the source will be backed up to the destination The first time the backup job runs like a normal backup In subsequent Overwrite incremental backups files added to the source as well as files deleted from the source are kept in the backup folder The first backup job runs like a normal backup As each additional backup Overwrite differential job runs files are added to and deleted from the backup folder The backup destination folder is always the same size as the backup source folder 7 Click Add 8 Click Browse under Backup Source Folder Name 9 Select the shared folder that will be the backup source then click OK Browse Folders y Ml share 3j M back src g Mill back trg OF Cancel ee 1 0 Click Browse under Backup Target Folder Name 62 1 1 Select the backup target and click OK
15. are mnt disk1 share mnt usbdisk1 Accessing the LinkStation with an anonymous user To allow anonymous access to your FTP share disable access restrictions To access the LinkStation via anonymous FTP configure your FTP client software with the following settings Hostname IP address of the LinkStation Username Anonymous Password Any character string Port 21 If the LinkStation joins a domain anonymous users cannot access it Notes e Don t use FTP to share files and folders with multi byte characters in their names with a Mac Use an AFP or SMB connection instead e Ifa file was created or copied by AFP you may not be able to delete it using an FTP connection If this occurs use an SMB or AFP connection instead to delete the file For FTP connections make sure that the total filename including directory path is 250 single byte characters or less 58 Chapter 6 Backup Back Up from the LinkStation You can back up LinkStation folders to e A different folder on the LinkStation e Another LinkStation on the network e Another TeraStation on the network Preparing a Backup Destination First configure a folder as a backup destination 1 In Advanced Settings click File Sharing Ba File Sharing 2 Click f to the right of Folder Setup fe Folder Setup 2 Folder s v 3 Choose the folder to set as a backup destination 4 click dit 5 Under LAN Protocol Support check Backup and click OK Notes
16. date from your computer If an NTP server is specified by name instead of IP address make sure that a DNS server is configured for the LinkStation Note The internal clocks of the LinkStation and other devices on your network may run at slightly different speeds Over a long period of time your network devices may show somewhat different times which can cause network problems If clocks on your network vary by more than 5 minutes it may cause unexpected behavior For best results keep all clocks on the network set to the same time by adjusting them regularly or use an NTP 86 server to correct them all automatically 6 Click the Language tab Select the language to be used in the Windows client then click OK Hame Time Language Mane Time Language Management Information Character Encoding CP932 x Display Language English Nw Required OK Cancel Note This tab changes the language used by the LinkStation for email notification DLNA and other functions To change the language displayed in Settings go to Advanced Settings or Easy Admin and click Language in the menu bar Choose your desired language from the drop down menu Jumbo Frames If your other network devices support it you may be able to increase network performance with jumbo frames 1 In Advanced Settings click Network i Network 2 Click to the right of IP Address I IP KR LAM Port 1 192 168 10 19 p 3 Click the LAN port where the j
17. drive using NAS Navigator2 1 Double click the icon to start NAS Navigator2 2 Right click on the LinkStation s icon and choose Map Share Men Sa View mm Browse gt Refresh Browse Shares Settings Properties Map Share Disconnect Share Create Desktop Shortcut L52100 Series WORKGROUP z HDD 2 5 6B 916 7 GB 0 396 I 192 158 10 20 i ask 2855 255 255 0 v 192 168 10 1 AA BBE OC DD EE FF 1 40 Note The following shared folders can be mounted as network drives from NAS Navigator2 share share2 share3 share4 usbdisk1 usbdisk2 usbdisk3 usbdisk4 usbdisk5 3 An icon for the mapped share will appear in Computer or My Computer You can use this network drive just like 92 any other hard drive 4 Changing the IP Address 1 Double click the j icon to start NAS Navigator2 2 Right click on your LinkStation s icon and choose Properties IP Address 3 Uncheck Use DHCP enter the IP address and subnet mask and click OK If the username and password prompts appears enter the admin username and password LS210DCBF Properties L52100 Seres Configuration IP Address Renew IP address IF Address Subnet Mask Default Gateway OK Cancel Note The following IP addresses are reserved and should not be used If you configure one of them by accident initialize settings with the function button on the LinkStation Local loopback address 127 0 0 1 255 255 255 0 Ne
18. eee eee eee eeee 17 Configuration from a Computer e eee eee ee eee eee eee eee se eee eso eeeeoe 17 Configuration from a Mobile Device eee eee e eee eee ee eere ooo 18 Adding DSBES s ois A AE EE S091 08S URSUS RES ES UNS EESEXIRUTEPE SHE TUUS 19 Configuration from a Computer e eee eee ee eee esee etes eese ee eessseeeeoe 19 Configuration from a Mobile Device eee eee e eere eee eere oou 21 PROG GEOBUDS aossieerais tuse EE eua S EIU H AER CIAR IUE ERELVAEIDU FI NOTE ERE PLUS ER EE APNS 22 Access Restrictions de ETE 23 Local Users OFOUDS E E A E 23 Ted D o Y A EE E E EEA 25 NT DOMAIN rera N E EEEE E S 27 User Authentication with an External SMB Server 29 Chapter 4 Managing Storage cccccccccscscsccccsesccesses DD RAID ALL OUS wrisscccscecscinsccuscovsiansscnsceesbassucussoesbussicnswovsinssscusvevsiuasnonsese 33 Working with RAID Arrays eee ee eee eee eee eee re eee eee e eoe sees 33 SIE JBOD e 33 Changing RAID Mode conn sitae EXEE IU pEE EAS E EI NO UIPSE S Eta essa Ii Cv aei PAS PECES PE PE 34 RMM RAID Mode Manager eee e e eee ee e eee ee e eee ee eee eee e eee e ee esoose 35 RAID Scanning A tre eei varii Io u a Pe Po aS reo RTL A SEVA SE TVAVVE I VOCI a CHAIR VE ES RUE 36 Adding an External Hard Dri
19. for certain operations For best results create a user account with permissions on the WebAccess share before using WebAccess Q Click Edit 1 0 Under LAN Protocol Support check WebAccess and click OK Notes e The following levels of security are available Allow Anonymous Anyone can access view shared folders Allow All Groups and Users All groups and users registered on the LinkStation or TeraStation can use WebAccess If you added a local group or user but you cannot access a shared folder which is allowed to access all groups and users restart WebAccess by moving the WebAccess switch to off then on and try again Use Inherited Folder Permissions Users and groups have the same access permissions with WebAccess that they do locally If access restrictions are not set for the shared folder then this option will not be shown e When a user or group can access a folder through WebAccess depends on a combination of WebAccess settings and the shared folder s settings WebAccess Public Allow All Groups and Use Inherited Folder Allow Anonymous abo Folder Sot Mode Users Permissions O u g Folder Attribute Read amp Read Read amp Read Read amp Read LN e MUN prem rcr EN Not Notloggedin in write access WebAccess access A t i write access Group with read only access m bhu i mi R Read only R W Read and write No access 1 1 Continue with the procedure at http buffalonas com m
20. format type and click Format Format Disk e J Format Disk 1 Format Type XFS Warning Before formatting check that the disk is not set as a backup device Do not format if the disk is set as a backup device The Confirm Operation screen will open Enter the confirmation number and click OK Confirm Operation J Disk Format A format will erase all data stored on the target drive or array During a format you will not be able to change the Linkstation s settings To continue enter the confirmation number displayed below and click OK Warning This operation cannot be canceled Confirmation Number 9 C J 6 Depending on the size of your drive the format may take several minutes to several hours to complete The power LED will flash during the format Shared folders cannot be accessed during a format Do not turn off the LinkStation until the disk format is finished Notes Do not turn off or disconnect power to the LinkStation while formatting a hard drive For drives of 2 2 TB or larger make sure that the GPT Partition checkbox is selected If you accidentally format a larger drive without GPT disconnect and then reconnect it before reformatting with GPT e The following format types are supported to format from Settings FAT32 recommended for connecting to 41 computers and XFS recommended for adding additional external storage to a LinkStation Erase Data on the LinkStation Completely
21. or Hostname Select All Unselect All Close If your setup meets the requirements below you don t have to configure these settings e The source and target LinkStations are on the same network e No backup password is set for the target LinkStation e NoLinkStation from outside the subnet or connected by a VPN is used Notes e To back up data between LinkStations or TeraStations on a network using jumbo frames make sure that both devices are configured to use identical or similar Ethernet frame sizes If Ethernet frame sizes are significantly different the backup job may not be properly performed In such a case select the default frame size 1500 bytes e You can also specify hostname by a fully qualified domain name FQDN 60 Configuring a Backup Job 1 In Advanced Settings click Backup f Backup 2 Click f to the right of Backup DU Backup Inactive Z 3 If you configured a backup password click Set to the left of Backup Password If not skip to step 5 4 Enter the configured backup password and click OK Set Backup Password Backup Password 5 Click Create New Job Backup List Backup Password sat List of LinkStations and TeraStations Create New Job Delete Job s Filter x Task Scheduled Day Time Operation Mode Status Select Al Unselect Al 61 Note Up to 8 backup jobs can be configured 6 Select backup settings such as date
22. pa Users Configure users and passwords for your LinkStation here Create User gt e guest gt a eat in account for quest access to the system e admin gt mmm Built in account for administering the system 21 3 Enter the desired username password and description and tap Apply bd L Create User Using the same username and password that you use to log in to Windows is recommended Username pa Create a folder for this use Fassword Password Confirm Description Optional Note Usernames may contain up to 128 alphanumeric characters and symbols Passwords may contain up to 20 alohanumeric characters and symbols Adding Groups 1 In Settings click File Sharing Bg File Sharing 2 Click f to the right of Groups Local G 36 i ha Groups is vu 3 Click Add Group 22 4 Enter the desired settings then click OK Group Settings Group Name Filter x Username Group ID admin Enter a number from 1000 to 1535 test Group Privileges General Users v Select a recipient for group notifications User with email address configured Disabled w Email address Description Select All Unselect All Quota 5 Enable Units GB amp Diable Required OK Cancel Notes e Group names may contain up to 20 alphanumeric characters hyphens underscores and periods Do not use a symbol other than an underscore _
23. procedure in this chapter Always back up any important data before performing actions that affect your RAID array e After the RAID mode is changed except when creating a RAID 0 array or JBOD the LinkStation performs a RAID check that will take about 10 hours per TB File transfers are slower during this period While the 117 message is displayed in NAS Navigator2 do not turn off the LinkStation If you do the RAID check will start Over RAID 1 Combines 2 drives into a mirrored array The available space in the array is the capacity of a single drive Identical data is written to each drive If a drive is damaged data can be recovered by replacing the damaged drive As long as one drive in the array remains undamaged all data in the array can be recovered RAID 0 Combines 2 or more hard drives into a single array The usable disk space is the total space of all drives used This simple RAID mode offers faster performance than RAID modes that include parity If a single drive in the array fails then all data in the array is lost JBOD This mode uses the hard drives inside the LinkStation as individual drives The disk space you can use is the total capacity of all drives in the LinkStation If any drive is damaged then the data on that drive is lost Working with RAID Arrays To change RAID settings navigate to Drives RAID in Advanced Settings Using JBOD With JBOD each hard drive in the LinkStation is addressed separa
24. will still apply to shared folders if an external SMB server is used for authentication The procedure below contains methods to automatically register external users You can also manually add external users by converting them from local users Refer to the Converting Local Users into External Users section above for more details on converting local users In Advanced Settings click Network it Network Click f to the right of Workgroup Domain sa Workgroup Domain jii Fi Click Edit 29 4 Select Workgroup and click Next Workgroup Domain Settings Authentication Method os aah Workgroup 2 NT Domain Active Directory net Cancer 5 If a prompt appears click Yes 6 Enter a workgroup name Select Authenticate local and external SMB server users and enter the SMB server s IP address You can also specify a server from another subnet Workgroup Settings Workgroup Name WORKGROUP WINS Server IP Address Authentication Settings Authenticate local LinkStation users only Authenticate local and external SMB server users Authentication server name or IP address v Automatically register users who access LinkStation folders V Restrict user registration to a single folder Name Required OK Cancel 7 If Automatically register users who access LinkStation folders is checked users that access any of the LinkStation s folders will be automatically registered as external users This
25. you easily change or restore your Windows security settings to work with external authentication Converting Local Users into External Users If using an external SMB server for authentication you may convert any local users into external users This way the LinkStation will have a user list that matches the users in the external SMB server and access restrictions for this LinkStation s shared folders may be assigned to the converted external users Follow the steps below to convert a local user into an external user If a local user is converted their user information including passwords will be removed from the LinkStation External users cannot be reverted to local users Note External authentication should be enabled before local users can be converted For more information on external authentication refer to the User Authentication with an External SMB Server section 1 In Advanced Settings click File Sharing 31 2 Click f to the right of Users 3 In the user list screen check any users to be converted to an external user then click Convert to External User 4 ClickOK 5 Enter the confirmation number and click OK Converted users are displayed under the External Users tab You can then configure access restrictions for external users 32 Chapter 4 Managing Storage RAID Arrays The default RAID mode is RAID 1 Notes If you change the RAID mode all data on the array is deleted This is true for every
26. 1000 users and 1000 groups 10 000 users and 10 000 groups can be downloaded from the domain controller but are not supported To use the LinkStation as a member server in an NT domain the LinkStation should be logged in to the domain and accessed from a computer that is not a member of the domain with a valid domain account If the LinkStation is a member server of an NT domain you cannot connect as a guest user via AFP When you change the user or group settings on the domain controller these changes may not take effect immediately on the LinkStation until it is rebooted If your LinkStation is a member server in an NT domain and you change the authentication method to Workgroup the account on the domain controller will not be deleted automatically If the LinkStation has joined a domain network you cannot connect to it via FTP Don t disable the SMB protocol while an NT domain server is used for access restrictions If you do you will need to enable SMB again and reconfigure the NT domain settings from scratch User Authentication with an External SMB Server LinkStations on your network can be linked to an authentication server for centralized management of user accounts and passwords The authentication server should be another TeraStation or another LinkStation Other external SMB authentication servers are not supported Notes Disable SMB2 before using external authentication Access restrictions for local users and groups
27. 2 Not used Timer 3 Not used No operation is performed at 12 00 and the unit goes into sleep mode at 24 00 Example 2 When running at a current time of 10 00 Wednesday Timer 1 Daily 9 00 18 00 Timer 2 Wednesday 10 00 20 00 Timer 3 Not used 82 On days other than Wednesday normal operation begins at 9 00 and the unit goes into sleep mode at 18 00 On Wednesday the unit goes into sleep mode at 20 00 Example 3 If running at the current time of 10 00 Wednesday Timer 1 Daily 9 00 18 00 Timer 2 Wednesday 10 00 3 00 the next day Timer 3 Not used On days other than Wednesday normal operation begins at 9 00 and the unit goes into sleep mode at 18 00 On Wednesday normal operation begins at 9 00 and the unit goes into sleep mode at 1 00 the next day Example 4 When running at a current time of 10 00 Wednesday Timer 1 Daily 9 00 18 00 Timer 2 Wednesday 7 30 22 00 Timer 3 Not used On days other than Wednesday normal operation begins at 9 00 and the unit goes into sleep mode at 18 00 On Wednesday normal operation begins at 7 30 and the unit goes into sleep mode at 22 00 e Toturn on the LinkStation before the wake up time when it is in sleep mode press the function button Encrypting Data Transmission Encrypting Settings Data All communication with Settings can use SSL encryption if you access Settings through https Encrypting FTP Transfer Data You can encrypt passwords and files using SSL TLS for secure
28. 84 Initializing from Settings ecce eee eee eee eee eee ee ee eee ee eee ee esee oe seee 84 Initializing with the Function Button seesscecsccecsccccscecsccccscccsccosscecsceeo 84 Online Uppdal sssrinin rnae 85 Name Date Time and Language scsecesscecseccsccccscecscecsccesecessee 85 Jumbo Frames conii i Ii E SIS EE EE ETE 87 Changing the IP Address ccce eere ee ee eee eee ee e eee e eee 88 Chapter 9 Utilities ccccccccccsccccccscsccccscsccccccscscccsses GO NAS Navigator2 for Windows cec eee eee e e eee eee eee ee eee eoe 90 Mount as Network Drive eee eee eee eee eee ee etes e eese eese eese eoe ee eoe 92 Changing the IP Address iere vitra i VENIR UIVEX Y TI NSP TEST EY VI E PE VE VeL SX EYEPAS TE 93 NAS Navigator2 for Mac OS eee eee eee eee eee eee eese eos seeeoe 93 Mount as Network Drive eee eee eee eee eee ee eee ee e eee eese eese soos eoe 94 Changing tbe EP GU GSS ccicese seca ticiscececnuseidacacdevucseteasddestasevceseseceavacscesseons 95 Chapter 10 Appendix e eee eee ee eee e o eese eese scs OF When the Power LED Blinks ccce eee eere ee eee 97 Derauit SeEinds E E E 99 Specificato docs csascecescvscvacsssvacscvecsncsesseceacuees EPEE EE CUS 99 Mode Pesas EE E E E A 100 Chapter 11 Regulatory Compl
29. A Server Settings DLNA Client Access Permissions Automatic Update a Search for updates Specify update interval Initialization of the Database Keep current list Initialize Required Disabling Playback from Specific Devices You may block specific DLNA devices from playing back media content 72 1 In Advanced Settings click Services A Services 2 Click Pf to the right of DLNA Server 3 Click DLNA Client Access Permissions al Uncheck any devices you do not want to allow to play media and click OK Enable DLNA Clients Refresh Database MAC Address IP Address 00 08 9b c0 b6 4e 192 168 11 77 Device Mame a 00 19 d1 83 19 d2 o DD 1a 4b 49 39 80 DO0 1d 73 87 35 19 D0 22 68 7d a3 73 00 24 35 6a 15 0f 192 168 11 70 e 0 50 43 82 64 75 Supported File Types The LinkStation supports DLNA streaming of files with the extensions below File Extensions mpe mpeg mpeg2 mpg m2p tts m2ts m2t mts m 1v m4v mp4 mov Video Files ais wmv avi divx xvid asf dvr ms vob 3gp vdr spts tp ts Picture Files jpg jpeg png bmp gif tif tiff yuv Music Files mp3 wma wav lpcm pcm ogg m4a mp4 3gp flac m3u Mpa aac apl ac3 aif aiff mp2 mp1 dsf dff iTunes Server If the iTunes server is enabled computers on your network with iTunes can play music files stored on the LinkStation and transfer them to your iOS devi
30. Access ee eee eee ee ee eoe esesosescsss DO WED ACCESS scacscasacpiccctcacsersisvossescaveesenesareaessvacesacrsevsevsesaacecsstseosavcocsiys 50 Configuring from a Computer ccccscsccccscscccsscsscccsscscccsssscccsssscooesessces 50 Configuring from a Mobile Device eee eee eee eee e eere eee eee oe 53 xia EE M MM 57 Back Up from the LinkStation 1 ecce eee e eee ee een eeu 59 Preparing a Backup Destination ccce e eee eee eee eee eee eee ee eee osose 59 Configuring a Backup Job ccce e eee eee ee eere eee eate eee e eee eee e eeoe 61 Backing Up Your Mac with Time Machine 63 Copying from a USB Device e eee eee e eee eee ee retos esee ee eeoe 66 Configuring Direct Copy from a Computer ccce eee eee eee eene 66 Configuring Direct Copy from a Mobile Device 67 Starting Dir ct CODY iouis i na isa E ERU RREER ECL IEIR ELTERN RE IRURE ERE 67 Chapter 7 Multimedia e eee ee eee ee eee o eese esses OD Configuration from a Computer ee eee eee e eee eee ee ee eee ese eee essseeeoe 69 Configuration from a Mobile Device eee eee e eere eee eere eue 71 Playing PUGS 4s ccececsesacvacsscecetes
31. BUFFALO LinkStation 200 User Manual www buffalotech com 35020312 04 2014 09 Contents Chapter 1 Getting Started eee ee eee eee eese eee s O BIETER E TTD 6 Changing Admin Password and Adding a Shared Folder 7 Installing Applications cosi cr er Yee NOCT YEHEUE VR EFUS VH EVE EN YEVENETEVEV KT SES ETHER SN Y 9 AM LUPLtCIAM n 9 SmartPhone NavidjatOLaesi eoskeestsvevevecevvkvivavavsvsee vu ve vseuvx eve eese eus eue ee vvs 9 WeBAECOSS sonne ne PEDE evOE o EE EXEC NN ESSEE T PR V ESET 9 Accessing Shared Folders ees eo sees e uses sena aae E Ra FERE NE EE SEN N EEVP x OU oe FS ua aora 9 Accessing from a Computer eere eee eee eee esee eese esee eee sse ees esseeeeesooe 9 Accessing from a Mobile Device ecce ee eee eee e e eere e e reae ee nooe 10 Turning the LinkStation On and Off eee creen 10 Chapter 2 Configuration eee eee ee ee eee e eeosososes 11 Opening Settings from a Computer eee e ee eee eee eee eee none 11 Opening Settings from a Mobile Device 15 Settings That Can Be Changed from Your Mobile Device 16 Chapter 3 Sharing Files e eee e e eee eee s 17 Adding Shared Folders ccce ecce ee eee eee
32. Configure access restrictions for each shared folder Create Folder gt share gt recoge webaxs gt 3 Enter a folder name and description and tap Apply BUFFALO ce d a admin A amp rovrov P W Create Folder Folder Name Description Optional Access Restrictions Off Notes Folder names may contain up to 27 alphanumeric characters and symbols The description may contain up to 75 alphanumeric characters e Ifyou create a shared folder from a mobile device SMB and AFP connections can be used to access this folder by default Adding Users Note The LinkStation can register a maximum of 300 users which includes the default users admin and guest Configuration from a Computer 1 In Settings click File Sharing B9 File Sharing 19 2 Click to the right of Users Local Users 3 User s Bb Users 3 Click Create User 4 Enter the desired settings then click OK User Settings Username Filter Group User ID l admin umi ta I i Enter a number from 1000 to 1559 imus Email Password Confirm Password Description Sele ct All Unset ot Al Primary Group m kd Quota hdusers Enable Units GB a Disable Required 0 jJ ome Notes e Usernames may contain up to 128 characters including hyphens underscores periods amp S and 96 Do not use a symbol as the first chara
33. Desktop Shortcut L52100 Series WORKGROUP HDD 2 6 GB 816 7 GB 0 396 192 168 10 20 A Mask 255 255 2550 192 168 10 1 AA BBE OC DD EE FF 1 40 11 3 The Easy Admin screen will open BUFFALO e Ov y ov E Simin a Rearrange Tiles m Language T ui Es v gt 133 Getting Started WebAccess BitTorrent DLNA Advanced Settings Notes e Ifyou click any buttons you will need to enter a username and password Enter Username and Password El Log in as a different user Username admin Password Time out Period amp 10 minutes Unlimited e Ifthe time out period is set to 10 minutes you will be logged out of Settings after 10 minutes of inactivity You will also be logged out when you reboot the LinkStation or close the web browser even if you select Unlimited e Click Secure Connection to log in with an encrypted connection e You can also use Bonjour to log in to Settings from Mac OS In Safari click View Show Bookmarks Bar From Bookmarks click Bonjour LinkStation name Getting Started The wizard lets you configure the following settings e Changing administrator password e Creating shared folders e Access restrictions a Getting Started Status Configured The first time you access your LinkStation this page will open Step through the wizard to change your 12 administrative password BUFFALO f amp Ov Ov ovr P admin F language EI P1 Getting Star
34. FTP communication First open a shared folder s settings and click Edit under LAN Protocol Support check FTP and click OK Enable SSL security in the setup screen for your FTP client The procedure depends on the FTP client software SSL Encryption SSL is a cryptographic protocol for communication security and data confidentiality over the Internet To use SSL you will need a certificate and a key These are available from web hosting services and many private privacy providers Configuring SSL To enter or update a server certificate and private key for SSL following this procedure 1 Navigate to Management SSL 83 2 Enter or browse to the locations of the key and certificate then click Import SSL Secret Key Browse Import Server Certificate crt Browse Import Close Rate Restoring Factory Defaults To initialize the LinkStation to its factory default settings follow this procedure Initializing from Settings 1 In Advanced Settings click Management Management 2 Click to the right of Restore Erase gt Restore Erase ri 3 Click nitialize LinkStation Restore Erase This initializes the LinkStation s settings All settings are restored to their factory defaults Saved data is not erased Initialize LinkStation l The Confirm Operation screen will open Enter the confirmation number then click OK 5 The LinkStation will be restored to its factory default sett
35. Method C Workgroup t NT Domain 3 Active Directory Me xt Cancel 6 Click Yes 7 Enter the desired settings then click OK NT Domain Settings NT Domain Name WORKGROUP NetBIOS Name HT Domain Controller Name Computer Name Administrator Name Administrator Password WINS Server IP Address Required C 8 In Advanced Settings navigate to File Sharing Folder Setup n Folder Setup 2 Folder s vu 9 Click a shared folder for which you want to set access restrictions Shared Folder List ie Create Foker Fiter x Name Volume Recycle Bn SME AFP FTF Bacup BUNA WebAccess z usbdisk1 USE Desk 1 zi i share Array l Li w x Dore 10 click Edit 1 1 Enable Access Restrictions Access Restrictions Enable Disable 1 2 Select the level of access for Domain Users or Domain Groups you added BA Read and write access allowed l Read access allowed Access prohibited 28 13 click ok Notes If you change the LinkStation s name you will no longer be able to use domain users and groups or access restrictions To repair this rejoin the domain If both read only and read amp write permissions are given to a user the user will have read only access The most restrictive attribute will apply If a domain username is more than 20 bytes long the LinkStation truncates it to 20 bytes The LinkStation supports a domain environment with a maximum of
36. N utilisez aucun autre accessoire ou cable sauf instruction sp cifique de la documentation Italiano Non utilizzare cavi USB lunghi 3 metri o pi per collegare dispositivi USB a questa LinkStation Utilizzare esclusivamente i cavi e gli accessori inclusi nell imballaggio Non utilizzare altri accessori o cavi a meno che non sia specificamente indicato nella documentazione Nederlands Gebruik geen USB kabels die 3 meter of langer zijn om USB apparaten met deze LinkStation series te verbinden Gebruik alleen de kabels en toebehoren die zich in de verpakking bevinden Gebruik geen ander toebehoren of kabels tenzij dit uitdrukkelijk in de handleiding wordt aangegeven Norsk Bruk ikke USB kabler p tre meter eller mer for koble USB enheter til denne LinkStation serien Bruk kun kabler og tilbeh r som er inkludert i pakken Ikke bruk annet tilbeh r eller kabler med mindre spesielt instruert til gjore det i dokumentasjonen Portugu s Nao usar cabos USB de 3 metros ou mais para ligar dispositivos USB a esta s rie LinkStation Utilizar apenas cabos e acess rios inclu dos na embalagem Nao utilizar outros acess rios ou cabos salvo se especificamente indicado na documenta o Suomi Ala k yt 3m tai pitempi USB kaapeleita USB laitteiden liitt miseen n ille LinkStation sarjoille K yt ainoastaan pakkauksen mukana toimitettuja kaapeleita ja varusteita Ala k yt muita varusteita tai kaapeleita ellei n in ole erityisest
37. Re Array No RAID array i configured Ir L Options Close 4 Set the RAID mode to RAID 1 5 Check Add a disk to RAID array with RMM Your data will be preserved Arrayi RAID Mode RAIDI 2 Add a disk to RAID array with AMM Your data wil be preserved Select the disk to preserve Disk 1 a Select the drives to configure in a RAID array Disk Status Model Shared Folder Size Dek 1 Normal ST10000 4003 1CH1 3 u 916 668 a Disk 2 Normal ST 10000MO003 9TN 1 916 665 Select an Unselect an Create RAJD Array Cancel Ji l Select the drive whose data will be saved from the drop down menu Select the drive to add to the RAID array Click Create RAID Array o ON OQ The Confirm Operation screen will open Enter the confirmation number then click OK RAID Scanning A RAID scan checks your RAID array for bad sectors and if it finds any it automatically repairs them RAID 1 arrays are supported For best result run RAID scans regularly 1 In Advanced Settings click Drives amm W Drives 2 Move the RAID scanning switch to the O position to enable RAID scanning amp Q RAID Scanning ma my 3 Click Pf to the right of RAID Scanning 36 4 Click Edit 5 Select the schedule for running RAID maintenance then click OK RAID Maintenance Settings RAID Scan Schedule Every 1st day of the month M Start Time a m M E Immediately Notes e Check Immediately to run a RAID sca
38. Station Remove the drive from the cartridge Install a new Buffalo OP HD LS series drive in the cartridge o N QAU A Replace the four screws 9 Insert the new drive in the empty slot 1 0 Close the front panel 1 1 Connect all cables then turn on the LinkStation 1 2 In Settings tap the blinking yellow information icon 48 1 3 Tap Recover RAID Array twice BUFFALO cwn amp admin W Recover RAID Array The defective drive has been replaced Start RAID array recovery RAID RAID array 1 RAID 1 Defective drive was replaced with a new drive Drive 1 Normal Drive 2 Mew Drive Recover RAID Array 1 Recover RAID Array 1 4 Click Yes 1 5 Enter the confirmation number and tap OK The array will begin to rebuild 49 Chapter 5 Remote Access WebAccess WebAccess is a program for accessing the files in the shared folder of your LinkStation from your computer or mobile device through the Internet Be careful when configuring WebAccess Certain settings can make the files in the shared folder available to anyone on the Internet without any access restrictions Configuring from a Computer Configuration from Easy Admin Note Use compatibility mode to use WebAccess with Internet Explorer on Windows 8 and Windows 8 1 1 Click WebAccess in Easy Admin x F WebAccess Status Disabled zm Number of Folders 1 o 2 Move the WebAccess switch to the 93 position to enable WebAccess
39. able to connect to a surge protector or outlet 9 Power Status LED The LED glows green when the power cable is connected 1 0 Anti Theft Security Slot Use this slot to secure your LinkStation with a cable lock not included 1 1 prive 1 Error LED LS220D LS220DE only If there is an error on drive 1 this LED will light 1 2 Drive 2 Error LED LS220D LS220DE only If there is an error on drive 2 this LED will light Changing Admin Password and Adding a Shared Folder After initial setup changing your password and creating other shared folders are recommended 1 Double click the icon to start NAS Navigator2 2 Right click on your LinkStation s icon and select Settings On the Mac select the LinkStation s icon while holding down the control key then select Settings Properties Map Share Disconnect Share Create Desktop Shortcut LS210D Series Norkgroup WORKGROUP HDD 2 6 GB 916 7 GB 0 396 IF ess 192 168 10 20 iF wbnet Mask 255 255 255 0 y 192 168 10 1 AAS BBE OC DD EE FF 1 40 3 Changing the password from the default is recommended BUFFALO f nh Ov Ov ov D a admin P Language P1 Getting Started gt Change Administrator Password Change the administrator password For security please chooge a naw administrator password below Administrator Username admin Show entered paesword Password 2D Confirm Password D The password may include up to 20 alphanumeric characters hyphens
40. amp Trackpad Print amp Fax Sound Saver Mouse Internet amp Network wv Q Blabla Me Network QuickTime Sharkey System u 0 9e 9 Accords Date amp Time Parerial baoltware tpeech Sartup isk Time Machine Universal Controls Update Aces Other Q Oo M o imghmh a Control Center Dx Fligsdilar Google Gravel Lime 6 Audia MacFUSE Pug Sanit wi Desktop MICH Devices Fa Ea 64 1 8 Click Choose Backup Disk gt og Time Machine 4 e Show All c Choose Backup Disk hi Time Machine Time Machine keeps copies of everything on your Mac inchading system files applications amd settings as well as your music pecrumes and other important files S ace Time Machine keeps daily backups you can revisit your Mac as it OFF NE ON appeared in the past IV amp haw Time Machine status in the menu bar il Click the lock to prevent further changes m 1 9 Select the LinkStation then click Use for Backup EA Documents JohnsPro TimeMachina i EA share LS CHLAB1 TimeMachine EA backtoMac JOHNSCHL TimeMachine EA backups BRIAM QUAD TimeMachina EA tempi TS XL5BEsupport TimaMachina o Set Up Time Capsule Use for Backup 20 Enter a username and password with the rights to access the shared folder on the LinkStation then click Connect Enter your user name and password so 9 Time Machine can access the file server LS pum CHLABI Connect
41. anual setup en 22 Note If you change your BuffaloNAS com name after WebAccess has been configured WebAccess may no longer work properly If this happens disable and then re enable WebAccess Configuring from a Mobile Device Notes On your mobile device download and install the SmartPhone Navigator and WebAccess applications from the App Store iOS devices or Google Play Android devices e You can also configure WebAccess settings from Settings 1 Open SP Navigator on your iOS device or SmartPhone Navigator on your Android device n BUFFALO 2 Select the LinkStation to configure WebAccess v NAS List Ss LS220D5E7 192 168 10 8 3 Tap NAS Setup lt NAS List LS220DC16 M LS220DC16 Menu NAS Setup Configure WebAccess settings using the setup wizard Open Settings You can configure your MAS from Settings the web based user interface IP Address Settings Change IP address settings 53 al Enter a username and password This will create a new user Tap Next lt Back NAS Setup Enter an username and password If the account does not already exist a new user will be created A shared folder will be created with the same name as the username Username Password 5 Enter the password from the previous step again and tap Next Enter the password for Password Note If UPnP is not enabled on your network you will only be able to access your NAS from the
42. are Retesh L amp 220D05E7gshare D L522005E7 back src D LS22005E7 back_trg OK Cancel 1 2 Click OK New backup jobs are now visible 1 3 Click Close Backing Up Your Mac with Time Machine Time Machine is a backup program included with OS X To use your LinkStation as a backup destination for Time Machine configure it as described below 1 Make sure that AFP is enabled in Advanced Settings The AFP switch should be in the on position fm AFP on S 2 Click amp to the right of Folder Setup Ke Folder Setup 2 Folder s p Choose a shared folder as your backup destination for Time Machine Click Edit Under LAN Protocol Support check AFP Mac and click OK Click OK Click Close O nN AUA UW Click Backup n Backup 9 Click amp to the right of Time Machine Time Machine are p 10 click Edit 63 1 1 Click Browse Time Machine Target Folder Required 1 2 Select the shared folder that you set in the previous step then click OK Im g BI share m Bil bak src ig BI back tro 13 click ok 14 click ox 1 5 Move the Time Machine switch to the 93 position to enable Time Machine Time Machine ma pi 1 6 On the Mac open System Preferences 1 7 Click Time Machine ww PM id uu o Q Appeariece Desktop amp Deck Expos amp international Security Spatlighe reer Saver Hardware 0 mM E Tham F Bucteth Cos 6 DaD rns Lrergy Keyboard
43. as Guest 9 Registered User Name admin oe Note If access restrictions are not configured on the target share log in with the administrator account The default username and password for the administrator account are admin and password If access restrictions are configured log in with an account with write privileges 21 Time Machine will count down from 120 seconds and the backup will begin 800 m Time Machine AM Name chare 2 Available Oldest Backup Change Disk oat Latest Backup Options Next Backup 115 seconds Time Machine em Hourly backups for the past 24 hours Daily backups for the pau manch OFF mem ON a Weekly backups until your backup disk is full fI Show Time Machine status in the menu bar al Click the lock to prevent further changes m 65 Copying from a USB Device Use Direct Copy to copy from a USB device directly to the LinkStation These devices are supported e USB mass storage devices e Card readers except for card readers that can recognize two or more memory cards e Digital cameras and other PTP devices e USB printers These devices are not supported e USB hubs e Mice e Keyboards Configuring Direct Copy from a Computer 1 In Advanced Settings click Backup f Backup 2 Move the Direct Copy switch to the on J position to enable Direct Copy Es Direct Copy on rj To change the Direct Copy target folder navig
44. as the first character Group descriptions may contain up to 75 alphanumeric characters hyphens underscores _ and spaces Do not use a symbol or space as the first character e Ifthe group ID field is left blank a group ID is automatically assigned Use numbers between 1000 and 1999 to set a group ID manually Don t use duplicate group IDs You may register up to 300 groups with the LinkStation e If you are logged in as a member of the general users group you can only change your own password If you re logged in as an administrator you can change any settings including other users passwords If you are logged in as a member of the power users group you can create and edit shared folders users and groups Access Restrictions You may restrict access to specific shared folders including external USB drives Notes e Access restrictions can be set separately for each shared folder but not for subfolders within the shared folders e Configure access restrictions through Settings Configuring access restrictions through Windows is not supported and may cause unexpected behavior Local Users Groups 1 In Settings click File Sharing Ba File Sharing 23 2 Click to the right of Folder Setup F Folder Setup 2 Falder s vu 3 Click the shared folder that you want to set access restrictions for Shared Folder List l Bessie Enkay Fiter xe Hame Volume Recycle Bn SME AFP FIP Eackup GUNA W
45. ate to Backup Direct Copy Edit select a new folder and click OK Direct Copy Target share 66 Configuring Direct Copy from a Mobile Device 1 In Settings tap USB Device Im WebAccess gt Status Enabled Folders 2 fol DLNA Server gt Status Disabled Off m USB Device gt a USB Drive Connected 0 2 GB 3 7 GB Ti Advanced Settings 2 Move the Direct Copy switch to the on position to enable Direct Copy then tap Apply w USB Device Direct Copy Direct Copy Target Folder amp USB Drive Connected 0 2 GB 3 7 GB Print Server Print Server Off The data from the USB drive will be copied to the target folder You may change the target folder from the drop down list if desired Starting Direct Copy 1 Connect the USB device When it mounts about 10 seconds the function LED will light up Notes e Devices that don t trigger the function LED to light up are not supported e When you connect PTP devices the function LED may not light up In such case disconnect the PTP device from the LinkStation once then reconnect it 2 You now have 60 seconds to press the function button once If you do the function LED will flash as all the files on the USB device are copied to the Direct Copy folder of the LinkStation 67 Notes e While the function LED is flashing hold the function button down for 3 seconds to cancel Direct Copy Note If accessing Settings from a mobile dev
46. ately after clicking Upload 4 The download will start Note To cancel downloading click and Remote Click Ju to pause the download Click or e to resume Connecting a Printer You can connect a printer to the USB port on the LinkStation Notes Only one USB printer can be connected to the LinkStation e Bidirectional communication is not supported i e remaining ink quantities and other printer status information is not supported e Don t disable the SMB protocol while the print server is enabled If you do you will need to enable SMB again and reconfigure the print server from scratch 7 Setting Up a Printer from a Computer Windows 8 1 Windows 8 Windows 7 or Windows Vista 1 Connect a printer to the LinkStation s USB port then turn the printer on 2 In Advanced Settings click Services A Services 3 Move the print server switch to the O position to enable the print server ie Print Server ma pi Al Refer to the manual supplied with the printer and install the printer drivers 5 Launch NAS Navigator2 Double click your LinkStation s icon 6 Double click the icon of the connected printer shared name is displayed J info X Ip F J share J timemachine ay Printers clickoK Connect to Printer The server for the printer does not have the correct printer driver installed If you want to search for the proper driver click OK Otherwise click Cancel and contact your network admi
47. can disable update notifications in Management Update e To clear an update notification press the function button Name Date Time and Language Configure the LinkStation s hostname date time and language as follows 1 In Advanced Settings click Management Management 2 Click to the right of Name Time Language Name Time Language pz 3 Click Edit 85 Al Click the Name tab and configure the LinkStation s name and description Hame Time Language Hume Time Lanrguare Management Information Name L5210DCBF Description LinkStation Required OK Cancel 5 Click the Time tab Enable NTP server and check Use Local Date Time to use your computer s time settings for the LinkStation Hame Time Language Mame Time Language Management Information Date Time Source 9 Enable Use Default NTP Server NTP Synchronization Frequency Daily v Disable Time Zone UTC 09 00 Osaka Sapporo Tokyo w Required DK Cancel By default the LinkStation adjusts its clock automatically by using a default NTP server This NTP server belongs to Internet Multi Feed Inc For more information visit http www jst mfeed ad jp To use a different NTP server navigate to Management Name Time Language Click Time then Edit Uncheck Use Default NTP Server and enter a new NTP IP address Click OK If NTP is not used enter the time and date manually Click Use Local Date Time to import the time and
48. cenesoccoustrasssduscssshanseusrehosncssdencossssecsstevencansontens 71 Connected DLNA compatible Devices eee e e eee e e eene eene oo 71 Streaming to DLNA compatible Devices eee eee eee ee eee 72 Disabling Playback from Specific Devices 72 AETERNITATE E 73 SIEUT ELTE TU TTL 74 Opening Download Manager cccccssssccssssccssssccsssscccssscccssscccssscoescsces 76 Downloading FII6S o cnr rue EN aTV EE EVESTETIVR NE YR AVR PEPA SEEN VOFI YR FUN FAVORE VE Pa IEEE 77 Connecung a PRINICCD scssctvcscccssevssssavascasaccusesecscsvessssusessaccscessbeusessises 77 Setting Up a Printer from a Computer eee e ee eee eee e eee eee eeeoe 78 Setting Up a Printer from a Mobile Device eee e eee eere 79 Chapter 8 Advanced Features e e ee ee eoo eese S 1 Emal NOCITICATIONN eene e beri eNvrevenvaeP iesu Erer NEFERET 81 SUCTCTOnILIM 82 Encrypting Data Transmission ccce e eee ee eee eee eee ee ee eee eoee 83 Encrypting Settings Data Ix ERE So SERRE SA EEEERAE EEURR EXE Fa aO ENS EEFERU nsn 83 Encrypting FTP Transfer Data coros iii EY EERPRR OSA ERA TER ES SAXEVATEES E CHER EVE EECS 83 SOL diea up 83 Restoring Factory Defaults eee eere ee eee eee eee eee eoo esses
49. ces The iTunes server supports playback from up to five computers 1 In Advanced Settings click Services A Services 2 Click to the right of iTunes Server 3 Click Edit 4 Click Browse 73 5 Select the shared folder that you want to make available to iTunes then click OK Browse Folders Retesh 3 B back src gD bad tra 6 clickok 7 Make sure that the iTunes server is enabled The iTunes server switch should be in the 93 position Ib iTunes Server ma pj BitTorrent BitTorrent is a protocol for distributing large amounts of data efficiently The information in this chapter is for users who are familiar with BitTorrent Note Use compatibility mode to use the download manager with Windows 8 1 or Windows 8 Configuration from Easy Admin 1 Click BitTorrent Jof BitTorrent Status Disabled 2 Move the BitTorrent switch to the al position to enable BitTorrent BitTorrent A 3 Select the shared folder to save files downloaded via BitTorrent from the drop down list then click Apply Configuration from Advanced Settings 1 In Advanced Settings click Applications E Applications 74 2 Click f to the right of BitTorrent Es BitTorrent TF a 3 Click Edit 4 Click Browse BitTorrent Settings Download Folder Browse Port 9090 Required Jom Retesh q UM share Select the shared folder where the downloaded file will be saved then click OK i
50. cter e The user ID should be a number from 1000 to 1999 Each user ID should be unique If this field is left blank a user ID is assigned automatically e When you log in to Settings as a registered user you can see the LinkStation s name IP address workgroup and disk status and modify the password e Do not duplicate user IDs group IDs usernames or group names Each should be distinct and unique The description may contain up to 75 alphanumeric characters hyphens underscores and spaces Do not use a symbol or space as the first character e Passwords may contain up to 20 alphanumeric characters and the following characters _ amp 5 Z Do not use a symbol other than an underscore as the first character Usethe same username and password for both Windows and the LinkStation or you may not be able to access shared folders e Ifa user belongs to multiple groups the most strict access restrictions will apply For example if a user is added to a group with read and write access and also to a read only group the user will effectively have read only access 20 Configuration from a Mobile Device 1 In Settings tap Users BUFFALO eat B ak Not logged in fi amp Ov Ov Ov _ Users gt W Folder Setup gt Ezi WebAccess gt Status Disabled Off fo DLNA Server gt Status Disabled Off USB Device gt 2 Tap Create User BUFFALO HL aL admin f 9 GOvov D
51. ction Move the LinkStation to a cool location 110 System temperature is too high Do not place objects in the area around the LinkStation 2 Operating in degraded mode 0000000000000 13 14 Examining the error status of RAID array X Note Transfer speeds are slower during the examination process 116 Creating RAID array X Resynchronizing RAID array X 117 Note Transfer speeds are slower during resynchronization ot ese Ro 115 118 Note Transfer speeds are slower during the rebuilding process Writing Os to RAID array X erasing all 119 data 120 Formatting hard drive X 121 Checking hard drive X 122 Erasing the data for hard drive X 123 System is being initialized 125 Updating the LinkStation firmware 126 Initializing all settings Don t turn off the LinkStation 127 Checking USB hard drive 128 Formatting USB hard drive Don t turn off the LinkStation 146 Dad ee CORO Don t turn off the LinkStation migration is in progress 147 ana mueren Scanners tens Don t turn off the LinkStation migration is in progress 52 A new firmware version has been Update the firmware released Make sure that the backup job is configured correctly Make sure that the NAS is on and not in standby mode If 154 A backup job has failed the backup job still fails check the status of the network and backup source and destination 98 Amber Not Blinking When the power LED glows
52. eh ccess T nI usbdisk USB Dirk 1 EE shere Array I w ri wi Sahak A Uns ast A Clore 4 Click Edit 5 Enable Access Restrictions Access Restrictions Enable Disable 6 Select the level of access for the user or group you added EF Read and write access allowed 4 Read access allowed Access prohibited Local Users Local Groups Filter Local Username guest admin Notes e An example of access restrictions by user is shown in the screen To apply access restrictions by group click the Local Groups tab and select group permissions If both read only and read amp write permissions are given to a user the user will have read only access clckok Notes e The following characters are handled differently by Mac OS and Windows Avoid using these characters when sharing data between Mac OS and Windows i pE e Windows does not support some characters that Mac OS and the LinkStation allow If you create a filename on a Mac with any of the following characters it will not display correctly on a Windows computer and you may have to connect to the LinkStation via AFP in order to display or copy any of the following characters on a Mac computer Ig esee e Donotuse any of the following words as a username or group name root bin daemon sys adm tty disk Ip 24 sync shutdown halt operator nobody mail news uucp ftp kmem utmp shadow
53. essage is displayed it is safe to unplug the drive Note a Job completed Dismount disk OF 38 Note To remount the drive unplug it and then plug it back again Dismounting from Settings on a Mobile Device 1 In Settings tap USB Device Bart WebAccess gt Status Enabled Folders 2 foT DLNA Server gt Status Disabled Off USB Device eo USB Drive Connected 0 2 GB 3 7 GB Tta Advanced Settings 2 Tap Dismount w USB Device Direct Copy Direct Copy Target Folder eo USB Drive Connected 0 2 GB 3 7 GB Print Server Print Server Off 3 When the completion message is displayed unplug the USB device and tap OK Checking Drives A disk check tests the data on a drive in the LinkStation or connected via USB for integrity Errors are fixed automatically With large drives a disk check may run for many hours Shared folders cannot be accessed during a disk check Do not turn off the LinkStation until the disk check is finished Follow the procedure below to run a disk check 1 In Advanced Settings click Drives zi Drives 39 2 Click Drives to check an internal drive or USB Drives to check an external drive mE Drives pj BL USB Drives pj 3 Select the drive to test and click Check Disk Drives Check Disk Ci maunt Disk Fiedizccwer Disk Disk Name Stabus Model Hame Unit Capacity Amount Used Used File System M C Disk 1 Normal STi000DMOUOS3
54. gure WebAccess settings to remotely access your LinkStation Configure your LinkStation to use with DLNA compatible devices on the LAN e Configure and dismount USB devices connected to your NAS including Direct Copy options and print server settings e Update the firmware Recover the RAID array when a drive fails models with 2 drives only 16 Adding Shared Folders Configuration from a Computer 1 In Advanced Settings click File Sharing Bg File Sharing 2 Click Pf to the right of Folder Setup F Folder Setup 2 Folder s a 3 Click Create Folder Al Configure the desired settings then click OK Shared Folder Settings mes 0000000 Dems E A Attribute Read Only Read amp Write Recycle Bin Enable E Disable LAN Protocol Support 7 SMB Windows Mac AFP Mac FTP Backup DLNA WebAccess Folder Attributes Hidden Share SMB Only Remote Backup Password WebAccess Public Mode Allow Anonymous Y Access Restrictions Enable Disable Required 17 Notes e Names may contain up to 27 alphanumeric characters hyphens and underscores Do not use a symbol as the first character in a name The description may contain up to 75 alphanumeric characters hyphens underscores and spaces Do not use a symbol or space as the first character You may create up to 400 shared folders e The names of shared folders should not use characters from mo
55. hared folder you right clicka Map Share iila the LinkStation s shared folder as a network device s icon Disconnect Share Unmaps the network drive Creates a shortcut icon to the shared folder share on Create Shortcut the desktop Click on the LinkStation s icon to display these options Sort by Displays when When NAS Navigator2 is minimized right click on the NAS Navigator2 icon in the system tray for the following options Browse Shares Settings Properties L5210DCBF d Map Share Refresh Disconnect Share Browse Shares Create Shortcut Exit Assigns the LinkStation s shared folder as a network NAS Name Map Share dive Unmaps the network drive Creates a shortcut icon to the LinkStation s shared folder share on the desktop Exits NAS Navigator2 91 The following tasks may be performed from the LinkStation s properties page LS210DCBF Properties L52100 Seres Configuration IF Address Settings Is where you configure your NAS Settings Apply Name Configuration Click Settings to open the configuration interface Check Use DHCP to assign an IP address from the DHCP server automatically If there is no DHCP server in the network you cannot use this function Check Renew IP address to obtain an IP address from the DHCP server You can manually enter an IP address subnet mask and default gateway Mount as Network Drive You can easily map a shared folder as a network
56. i ohjeistettu asiakirjoissa Svensk Anv nd inte USB kablar som r 3 meter eller l ngre f r att ansluta USB enheter till den h r LinkStation serien Anv nd bara kablar och tillbeh r som ing r i f rpackningen Anv nd inte andra tillbeh r eller kablar om du inte f r uttryckliga instruktioner om det i dokumentationen T rk USB ayg tlar bu LinkStation serisine ba lamak i in 3 metre ve daha uzun USB kablolar kullanmay n 103 Yaln zca pakette bulunan kablo ve aksesuarlar kullan n Belgelerde zellikle belirtilmedik e ba ka aksesuar ve kablolar kullanmay n 104
57. iance Information 102 For Customers in the United States cccccsccccccccccccccsccccccces 102 For Customers in Europe ee eee e eee e eee e eee eee eese eee eee e eoose 102 LS210D LS220D LS220DE 1 Power LED The white power LED will light up while the LinkStation is on The white power LED blinks while booting or shutting down The red power LED blinks when an error occurs If there is a status message the power LED blinks amber If there is new firmware available the power LED glows amber 2 Function LED This LED glows white while the LinkStation is being initialized and while dismounting USB devices It blinks 6 white during Direct Copy For enclosure model the red function LED glows when turning the LinkStation on to the initial hard drive installation and blinks after pushing the function button 3 Function Button Use this button for Direct Copy dismounting USB devices and initializing settings 4 Power Switch Move the switch up and down to power on and off D uUsB20Port Compatible Buffalo USB hard drives USB flash drives digital cameras and USB printers can be connected USB hubs are not supported 6 LAN Port Connect to a router hub or switch on your Ethernet network with the included Ethernet cable Linkand Activity LED This LED shows network activity It blinks green when the LinkStation is accessed over the network 8 Power Connector Use the included power c
58. ice you can start Direct Copy at any time by tapping Start Direct For digital cameras that are not in the USB mass storage class all files from the digital camera are copied When the copy operation is finished the access LED of the USB device will stop flashing Hold down the function button for 8 seconds The function LED will flash as all external drives are dismounted which will take about 30 seconds When the dismount is finished the function LED will stop flashing and glow steadily You now have 60 seconds to unplug any USB drives safely Copy d USB Device Direct Copy Direct Copy Target Folder e USB Drive Connected 0 2 GB 3 7 GB Start Direct Copy Print Server Print Server Off 68 DLNA DLNA is a set of guidelines for sharing digital media The LinkStation includes a DLNA server compliant with the DLNA guidelines Movies photos and music saved on the LinkStation can be played back on DLNA compatible TVs stereo equipment game consoles and other devices on the local network i E d a i 3 TeraStation eE Configuration from a Computer Configuration from Easy Admin 1 Click the e icon for DLNA 2 Move the DLNA switch to the position to enable DLNA Fol DNA Em 3 Move the switch for the folder you ll use for DLNA media to the position as well Shared Folder Name Al Click Apply 69 Configuration from Advanced Settings 1 vw JO U BB UW 9
59. in LS210D Approx 1 1 kg 2 4 Ib Weight LS220D Approx 2 5 kg 5 5 Ib LS220DE Approx 0 9 kg 1 9 Ib LS210D 1 2 TB models max 18 W 3 TB models max 24 W Power Consumption LS220D LS220DE max 48 W Temperature 5 35 C 41 95 F Operating Environment u Environment humidity 20 8096 no condensation Windows computers with Ethernet interface Windows 8 1 Windows 8 Windows 7 Windows Vista Windows XP Windows RT 8 1 Windows RT Intel Mac computers with Ethernet interface OS X 10 9 10 8 10 7 10 6 iPhone iPad iPod touch Compatible Devices and a rate OS Android smartphones and tablets Android 2 3 or later IEEE 802 3ab 1000BASE T Interface IEEE 802 3u 100BASE TX IEEE 802 3 10BASE T 1000 Mbps Full duplex auto negotiation Transfer Speed 100 Mbps Full duplex Half duplex auto negotiation 10 Mbps Full duplex Half duplex auto negotiation Number of Ports LAN Per Dimensions W x H x D Windows Phone Windows Phone 7 or later 32 bit and 64 bit Note The LinkStation requires an Ethernet connection with your computer for operation It cannot be connected via USB To use with mobile devices Wi Fi connection is required LS210D0101 LS210D0201 LS210D0301 LS210D0401 100 LS220D0202 LS220D0402 LS220D0602 LS220D0802 LS220DE 101 Chapter 11 Regulatory Compliance Information For Customers in the United States FCC Statement This equipment has been tested and found to comply wi
60. ing File Sharing as Drives Fg Folder Setup 1 Folder s ri M T ls liters Local Users 2 User s g Lace Group X Groupi x E4 Applications fg Groups a m SMB on ri i Network fm AFP lor Di Backup I FTP of k a ii r Management ia WebAccess c ri Link Station 52200 L522005ET Version 180 8 02 Copyright 2014 Butfala inc Notes e Username Password Combinations Settings Available admin password All blank 14 System information read only If a user is assigned as an administrator all settings are available If assigned as a general user the user can only access read only system information our username our password y ME and change their own password If assigned as a power user the user can create and edit shared folders users and general users groups To go back to Easy Admin click the Home icon Opening Settings from a Mobile Device You can access your LinkStation s Settings from your iOS or Android device Download and install SmartPhone Navigator from the App Store or Google Play Notes e If you have an older version of SmartPhone Navigator installed on your device update it to the latest version Your icons and software may be slightly different from the examples in this manual e You must be logged in as an administrator to change settings To use SmartPhone Navigator log in as a member of the administrators group e Mobile devices that support mobile op
61. ings Initializing with the Function Button You can also initialize the settings with the function button 1 Turn off the LinkStation 2 Turn the LinkStation on while holding down the function button The function LED will flash white 3 Press the function button again while the LED is flashing 4 Initialization will take 5 to 10 minutes Do not power down the LinkStation while it is initializing and showing an 123 information message in NAS Navigator2 and with the power LED When initialization is finished the LinkStation will automatically reboot Notes e The following settings will be initialized admin username admin password IP address and Ethernet frame size 84 e To disable initializing username and password navigate to Management Restore Erase Edit and change Restore factory default settings to Keep current settings Be careful with this option If this is selected and you lose your admin password you will not be able to reset it Online Update If a new firmware is available a message is displayed when the LinkStation boots You can update the firmware as follows 1 In Advanced Settings click Management Management 2 Click to the right of Update This LinkStation is using the raj e Update latest firmware 3 Click Install Update Notes e Settings is not available while the firmware is updating Don t try to access Settings from another computer until the update is complete e You
62. isable 1 1 Select the level of access for the user or group HA Read and write access allowed l Read access allowed Access prohibited 12 click ok Notes If you change the LinkStation s name you will no longer be able to use domain users and groups or access restrictions To repair this rejoin the domain To have the LinkStation join an Active Directory domain configure it to use a DNS server that can resolve names for the Active Directory domain After building an Active Directory domain the administrator password for joining the domain must be changed at least once or joining the Active Directory domain will fail The DNS name and NetBIOS name of Active Directory domains should be identical If both read only and read amp write permissions are given the user will have read only access The most restrictive access setting will apply If there are more than 5 minutes difference between the LinkStation s clock and the domain controller s clock joining the domain or authenticating domain users and groups may fail For best results use an NTP server to set the time for all network devices To use the LinkStation as a member server in an Active Directory domain the LinkStation should be logged in to the domain and accessed from a computer that is not a member of the domain with a valid domain account If the LinkStation is a member server of an Active Directory domain you cannot connect as a guest user via AFP If your
63. istration amp Enable BuffaloNAS com Name BuffaloNAS com Key j Random Generation Disable Automatic Router Setup Enable UPnP Disable External Port NAS Internal Port 8000 Exclusive Session Enable 3 Disable Session Timeout 30 minutes unlimited Required Loos LAN Only OK Cancel Be m To use SSL encryption for more secure data transfers enable HTTPS SSL Encryption Some WebAccess applications may not support HTTPS SSL encryption Disable it if this is an issue For more details refer to the WebAccess Help Guide You may use the default BuffaloNAS com registration or disable it to use a different DNS server 51 e Choose a BuffaloNAS com name and BuffaloNAS com key for your WebAccess account Names and keys may use 3 to 20 alphanumeric characters underscores and hyphens e If Exclusive Session is enabled users cannot log multiple computers in to WebAccess Only the last login will be active e Enter atime in minutes 1 to 120 or Unlimited before inactive users are logged out of WebAccess Click OK Move the switch to the al position to enable WebAccess 7 Click to the right of Folder Setup F Folder Setup 2 Folder s pri 8 Select a shared folder to publish Notes For best results create a new dedicated share for WebAccess When accessing shared folders through WebAccess from a remote location the username and password may be required
64. lect the drives to configure in a RAID array Disk Status Model Disk 1 Normal ST 10000003 10H 1 Disk 2 Normal ST 1000079003 91N1 Select AI Unselect Al 7 Resyme after creating the RAID array e Shared Folder Size 916 668 316 666 Create RAID Array Ji Cancel E JL M Note Normally after a RAID array is created it is resynced which optimizes the array making it more stable The resyncing process takes about 1 hour per terabyte of space in the array File transfers will be slower during this period but the array will remain fully usable RAID Array x Resycncing will be shown in NAS Navigator2 during the resync If you uncheck Resync after creating the RAID array the resync will be skipped If the LinkStation is rebooted during the resyncing process the resync will begin again from the beginning 9 Step through the wizard to create the array After changing the RAID mode create a shared folder RMM RAID Mode Manager With RMM you can create or expand a RAID array without erasing the data on the drives Hard drives that aren t in a RAID array show Normal You must have at least two drives available in JBOD not in aRAID array to build the RAID 1 array with RMM 1 In Advanced Settings click Drives Eg Drives 2 Click amp to the right of RAID ws RAID 35 3 Choose a RAID array RAID Array List Mame RAID Mode Status Unit Capacity Amount Used Used File System Time
65. local network To use WebAccess from outside your home either enable UPnP in the router or open port 9000 for WebAccess in 54 your router s settings Setup Complete Configuration finished You can now access your NAS using WebAccess Note You can not access from an outside network Tap Open WebAccess to start the WebAccess app Finish Open WebAccess 6 Enter the BuffaloNAS com name and tap Set lt Back NAS Setup Enter your BuffaloNAS com name You will use this name for opening the shared folder from outside network The BuffaloNAS com name may contain up to 20 alphanumeric characters 55 7 Tap Open WebAccess Setup Complete Configuration finished You can now access your NAS using WebAccess BuffaloNAS com name testwebaxs000 Tap Open WebAccess to start the WebAccess app Finish Open WebAccess 8 WebAccess will launch 9 Tap OK if the following message is displayed The link is now registered OK 1 0 Tap your LinkStation s hostname to open the shared folder LS220D5E7 testwebaxs000 Cancel If Creating BuffaloNAS com Name Failed If UPnP is disabled in your router creating the BuffaloNAS com name from SmartPhone Navigator may fail If this happens try the following procedure 56 1 Tap the SmartPhone Navigator icon on your mobile device 2 Tap Open Settings 3 Tap WebAccess BUFFALO T Ene ak Not logged in fi Ov Or Ov x Users gt XJ Folde
66. n immediately To stop a RAID scan click Cancel RAID Scan Adding an External Hard Drive Connect an External Drive Your LinkStation includes a USB port and you can connect an external drive to this port It will appear as a shared folder on the LinkStation Formatted drives are detected automatically Unformatted drives should be formatted in Settings After a USB drive is recognized Windows adds usbdisk X under the LinkStation in Network where X is the USB port where the hard drive is connected Notes e Hubs are not supported Connect a single USB drive to the USB port e Backup data from Mac OS may include characters that cannot be written to FAT16 or FAT32 drives such as DS Store For best results reformat the drive before using it as a backup target Compatibility The following devices are supported by the LinkStation e USB storage devices e Card readers except for card readers that can recognize two or more memory cards e Digital cameras e USB printers Buffalo external USB drives are recommended These devices are not supported e DUB and DIU series drives Hubs mice and keyboards Connect only one device to a USB port Some external drives with automatic power on don t turn on automatically when connected to the LinkStation Use their manual switch to turn them on Be sure to connect only one bus powered drive at a time If there is insufficient bus power for your USB drive connect its AC adapter
67. nd Off Move the power switch on the back of the LinkStation to the on position to turn it on To turn it off move the switch to the off position and wait for the unit to fully shut down before unplugging it Never unplug the AC adapter without properly shutting down the LinkStation first When all the LEDs on the front of the LinkStation turn off the shutdown process is complete ON OFF 10 Chapter 2 Configuration Configure and manage your LinkStation using the Settings interface accessible from a browser window Open the interface using the procedure below or type the LinkStation s IP address in the URL field of your browser Within Settings the Easy Admin page gives you quick access to commonly used settings Opening Settings from a Computer Note Internet Explorer 9 Firefox 18 Google Chrome 24 Safari 5 and later are supported If you have difficulty viewing Settings check the following If you have a proxy server enabled in the browser settings disable the proxy server Opening Easy Admin The Easy Admin page makes it easy to change common settings Follow the steps below to open Easy Admin e 1 Double click the icon to start NAS Navigator2 2 Right click on your LinkStation s icon and choose Settings For Mac OS click your LinkStation s icon while holding down the control key then select Settings ucc Browse Shares Settings Properties Map Share Disconnect Share Create
68. nistrator or original equipment manufacturer for the correct printer driver the manufacturer and model of your printer F your printer came with ee strainer inl A L A a printer documentation for a compatible printer Printers Bf Apollo P 1200 Bf Apollo P2100 P2300U Bf Apollo P2200 9 Register the printer 78 Windows XP 1 Connect a printer to the LinkStation s USB port then turn the printer on 2 In Advanced Settings click Services ER Services 3 Move the print server switch to the Lon position to enable the print server ie Print Server on my Al Refer to the manual supplied with the printer and install the printer drivers 5 Launch NAS Navigator2 Double click your LinkStation s icon 6 Double click your printer icon Ll f ue Ip 7 When The server for the printer does not have the correct printer driver installed If you want to search for the proper driver click OK displays click OK 8 Select the driver for your printer then click OK 2 x mE Solche man d acurer and model oteur printer H your primer came with an ze installation disk click Hawe Disk fyour printer is not Ested consultyour ennter cocunmantedontfoar a comet bl printer 9 Register the printer Setting Up a Printer from a Mobile Device 1 Connect a printer to the LinkStation s USB port then turn the printer on 79 2 In Settings tap USB Device Eg WebAccess
69. ns Lets you choose icon size position and view mode Auto power mode can turn supported TeraStations and AO ower LinkStations on the network on and off automatically l l Open Folder Opens the LinkStation s shared folder To display these options Settings Opens Settings for the selected LinkStation hold down the control O m hati 6 he NAS s IP noraen address or open Settings Label Color Selects the color of the name displayed below the icon Mount as Network Drive You can map a shared folder as a network drive from NAS Navigator2 E 1 2 W 1 Click the icon in the Dock to start NAS Navigator2 94 2 Double click the LinkStation icon or click the LinkStation icon while holding down the control key then select Open Folder Enter a username and password with the rights to access the shared folder 60G NAS Navigator2 OROSO ro Open Refresh l m here Open Folder am Settings Configure Label Color LS210DCBF LS210D1 Workgroup WORKGROUP HDD 2 6 GB 916 7 GB 0 3 IP Address 192 168 10 20 T Subnet Mask 255 255 255 0 USB HDD __1 3 GB 3 7 GB 34 0 Default Gateway 192 168 10 1 MAC Address AABB CCDD EE FF Firmware 1 40 NASNavigator version 2 71 3 Select the shared folder to mount and click OK 4 The shared folder is now mounted as a network drive Changing the IP Address Or nc 1 Click the icon in the Dock to start NAS Navigator2 2 Hold down the contr
70. ntosh information files for the Macintosh may be generated automatically Do not delete these files If they are deleted using Windows this may prevent further access from a Macintosh e TheLinkStation belongs to the default zone in AppleShare Server the zone cannot be specified e When files are copied to the LinkStation or to a USB drive connected to the LinkStation file information such as date created date modified and other date information may be updated or changed e Hard drive capacity is shown in Settings in actual gigabytes The Properties window in Windows may show GiB instead which will be a smaller number e If any settings are changed during a file transfer the transfer process may abort e File copying to the LinkStation is protected by a journaling file system If the Ethernet cable is disconnected or a power outage occurs while copying data the following may occur Preset data such as the LinkStation name users and groups may be erased An incomplete file may be copied and the file can no longer be deleted If this happens restart the LinkStation delete the file and perform the copy operation again e After a drive is formatted the 96 Used and Amount Used in Settings will not be 0 This is because some drive space is used for the system area Active Directory If an Active Directory environment the LinkStation uses account information from the Active Directory domain controller to set access restric
71. ol key select your LinkStation and choose Configure IP Address 3 Uncheck Use DHCP enter the desired settings and the administrator password then click Apply eoo NASNavigator2 LS210D006 LS210D Series Configuration Bl ss ect Use DHCP Renew IP address IP Address Subnet Mask 0 0 0 l Default Gateway 192 168 10 1 Administrator Password gm m Note The following IP addresses are reserved and should not be used If you configure one of them by accident initialize settings with the function button on the LinkStation Local loopback address 127 0 0 1 255 255 255 0 Network address 0 0 0 0 255 255 255 0 Broadcast address 255 255 255 255 255 255 255 0 95 The IP address range from 224 0 0 0 to 255 255 255 255 96 Chapter 10 Appendix When the Power LED Blinks White The power LED will blink white during bootup or shutdown Red If there is an error the power LED will blink red The pattern of the blink gives the error code You can also see any errors in NAS Navigator2 Place of Error Code toe B scaofErrorCoda The LED flashes for 1 0 second every 0 3 seconds This gives the tens place of the error code is PlhaceorErorCode The LED flashes for 0 5 seconds every 0 3 seconds This gives the ones place of the error code Corrective Action assistance Check the fan Use compressed air or tweezers to remove any dust or foreign An error occurred in the fan speed object
72. otification configure email 42 notification referring to chapter 8 Email Notification section Notes e When using quotas disable the recycle bin or empty the trash folder often The limited space includes the space used for trash e Quotas apply per drive or per array If a quota is set to 1 GB each array or drive can use a maximum of 1 GB e Quotas cannot be set for external drives connected to the LinkStation e If both user and group quotas are configured for a user the most restrictive quota will always apply Quotas for Users Follow this procedure to limit the shared folder disk space available for a user 1 In Advanced Settings click File Sharing Bg File Sharing 2 Click f to the right of Users Local Users 3 User s zl Bd Users ri 3 Select the user whose space will be limited Al Enable quotas choose the maximum space the user will be allowed to use and click OK Quota hdusers v Enable Units GB Quota Capacity 500 gt Disable Requred Note If you change the primary group restart the LinkStation to apply the quota settings D cClickok 6 Click the icon and select Restart to apply the quota settings Quotas for Groups Follow the procedure below to limit the space for shared folders that each group can use 1 In Advanced Settings click File Sharing fm File Sharing 2 Click to the right of Groups Local Groups 3 Group s ha Groups 3 Select the group whose s
73. pace will be limited 43 Enable quotas choose the maximum space the group is allowed and click OK Quota amp Enable Units GB Quota Capacity 500 gt Disable Required Click OK In Advanced Settings click 1 to the right of Users E Users Local Users 3 User s mg Select the user who will inherit the group quota settings Change the user s primary group to the group with the quota then click OK Click OK 1 0 Click the X icon and select Restart to apply the quota settings Hard Drive Replacement If a drive fails NAS Navigator2 and Settings will show an error message Notes Do not replace a running drive while the LinkStation is turned on Power down the LinkStation before changing the drive While the LinkStation is running never unplug or remove drives without dismounting them first The replacement drive should be a OP HD LS series drive available from Buffalo Using a different drive might cause your LinkStation to malfunction Use a Buffalo OP HD LS series drive of the same size or larger for the replacement drive If a larger drive is used the extra space will not be usable in a mirrored RAID array To avoid damaging the LinkStation with static electricity ground yourself by touching something made of metal before handling any sensitive electronic parts After a drive is replaced it will take about 30 minutes before normal file reading and writing are restored Settings may not be acces
74. process only applies with folders that have access restrictions disabled After new external users are added disable this option to limit the number of authenticated user accounts 8 If Restrict user registration to a single folder is checked the LinkStation will automatically create a read only shared folder Enter the shared folder name Users that access this specific folder will be automatically registered as external users If this setting is de selected at a later time the LinkStation will automatically remove the folder Note Connect to the authentication folder via SMB not FTP or AFP Automatic user registration may not work with OS X 10 8 or later the first time If this occurs try rebooting the LinkStation then access the authentication shared folder again 9 Click OK to save any changes When saving changes to the external authentication server settings you may not to convert all current local users to external users If a local user is converted to an external user their user information including passwords will be removed from the NAS External users cannot be reverted to local users 1 0 Click f to the right of Folder Setup F Folder Setup 2 Folder s vu 30 1 1 Click a shared folder to set access restrictions on Shared Folder List e Create Foker shes ier Fiter x Hame Volumes Recycle Bn SME AFP FTP Bacup DLHA Weh ccess T E usbdisk USB Dirk 1 v v f share Array v wf m
75. r Setup gt Ezt WebAccess gt Status Disabled Off fo DLNA Server gt Status Disabled Off USB Device gt Select the access level from the drop down list and tap Apply Tap OK Enter the desired BuffaloNAS com name vw OU A Select Configure router s port settings manually enter the router s port number and tap Apply FTP By default the LinkStation s shares are only accessible by users connected to the same network or router as the LinkStation The optional FTP server allows users outside the local network to access the LinkStation Note FTP is intended for users who already have FTP client software and have experience with it 1 In Advanced Settings click File Sharing fm File Sharing 2 Move the FTP switch to the Ma position to enable FTP f FTP C3 3 Click amp to the right of Folder Setup Ke Folder Setup 2 Folder s pz 4 Choose a folder to enable remote FTP access on 5 D Click Edit 6 Select read only or read amp write for the shared folder s attribute under LAN Protocol Support check FTP and click OK Accessing the LinkStation with an FTP client To access the LinkStation via FTP configure your FTP client software with the following settings Hostname IP address of the LinkStation Username The LinkStation s username Password The LinkStation s password Port 21 Shared folders connected by FTP are available from the mnt directory The default locations
76. rane Folders g BI back src g MI back trg DK Cancel 6 Enter the port number then click OK 7 Move the BitTorrent switch to the P position to enable BitTorrent Fel BitTorrent on P 75 Opening Download Manager Note The default username is admin and the default password is blank no password Opening from Easy Admin 1 Click BitTorrent Toff BitTorrent Status Disabled o 2 The download manager will open Im T amp ui v Show Al al f 0 Traealers w kl s Okl s Opening from Advanced Settings 1 In Advanced Settings click Applications Applications 2 Click f to the right of BitTorrent fy BitTorrent E pi 3 Click Open Download Manager BitTorrent Settings Download Folder share Port 9090 Open Download Manager 4 The download manager will open Skew All lt All O Trarifers w kbs 0 kis 2 SI zz Downloading Files 1 Open the download manager Am 2 Click the Lal icon 3 Enter the URL at Or enter a URL and click Upload The downloaded file will be saved in the folder that is specified in the Destination folder field Upload Torrent Files Please select a torrent file to upload Choose Files no files selected Or enter a URL Destination folder 9881 5 G8 Free mnt disk1 share transmission vf Start when added Cancel Upload Note Check Start when added to start downloading immedi
77. re than one language For example mixing Japanese and Korean characters in names is not supported e If multi byte characters are used in shared folder names configure the client language to match the characters in Management Name Time Language Recycle Bin To protect your data from accidental deletion you may configure your LinkStation to use a recycle bin instead of deleting files immediately The recycle bin will only work with SMB connections Read only Shares By default new shares are set with read amp write access but you may change the attribute to Read Only in Attribute Read only shares and HFS formatted USB hard drives will have Read only added to the shared folder description Hidden Shares To hide a shared SMB folder select Hidden Share SMB Only and click OK To open a hidden folder click Start Search programs and files and enter LinkStation s name Shared folder namesSV for the name For example if the LinkStation name is LSXXX001 and shared folder name is share enter LSXXX001 share to open it Note AFP and FTP folders cannot be hidden Configuration from a Mobile Device 1 In Settings tap Folder Setup BUFFALU Nm f oS 90v Ov Or Users gt 3y Folder Setup Z3 WebAccess gt Status Disabled Off o_o 4 DLNA Server gt Status Disabled Crt m USB Device gt 18 2 Tap Create Folder BUFFALO iw D aL admin fi amp Or Ov Ov I W Folder Setup
78. reen instructions to install NAS Navigator2 4 When the installation finished click Finish SmartPhone Navigator SmartPhone Navigator will allow to open LinkStation s Settings change the IP address and configure WebAccess settings Follow the instructions below to install the application 1 Open the App Store iOS devices or Google Play Android devices 2 Install SmartPhone Navigator WebAccess WebAccess will allow you access files in the LinkStation Follow the instructions below to install WebAccess application 1 Open the App Store iOS devices or Google Play Android devices 2 Install WebAccess Accessing Shared Folders Accessing from a Computer 1 Double click the 63 icon to start NAS Navigator2 2 In NAS Navigator2 double click your LinkStation s icon The Explorer will open with shared folders lists For 9 Mac OS the LinkStation is mounted as a drive icon on the desktop or it is displayed in the sidebar of the Finder Accessing from a Mobile Device To access shared folders from a mobile device with the following steps you must configure WebAccess settings first To configure WebAccess see the WebAccess section in chapter 5 1 Open SmartPhone Navigator 2 Tap your LinkStation from the NAS list 3 Tap Browse Note Alternatively you can access shared folders from the WebAccess app Open the application and tap your LinkStation s hostname in the NAS list Turning the LinkStation On a
79. rope EU Declaration of Conformity Dansk Brug ikke USB kabler der er 3 meter eller laengere for at tilslutte USB enheder til denne LinkStation serie Der ma kun bruges de kabler og det tilbeh r der er inkluderet i pakken Der ma ikke bruges andet tilbeh r eller kabler medmindre det er udtrykkeligt beskrevet i dokumentationen Deutsch Verwenden Sie keine USB Kabel die 3 Meter lang oder langer sind um USB Gerate an LinkStations dieser Serie anzuschlie en Verwenden Sie ausschlie lich die Kabel und Zubeh rteile die im Lieferumfang enthalten sind Andere Zubeh rteile oder Kabel d rfen nur dann verwendet werden wenn dies in der Dokumentation ausdr cklich vorgeschrieben ist 102 English Do not use USB cables that are 3 meters or longer to connect USB devices to this LinkStation series Only use the cables and accessories that are included in the package Don t use other accessories or cables unless specifically instructed to in the documentation Espanol Utilice cables de una longitud inferior a 3 metros para conectar los dispositivos USB a este tipo de LinkStation Utilice Unicamente los cables y accesorios incluidos en el paquete No utilice otros accesorios ni cables a menos que as se indique en la documentaci n Francais Utilisez des c bles d une longueur de moins 3 m tres pour connecter les p riph riques USB ce type de LinkStation Utilisez uniquement les cables et accessoires inclus dans ce package
80. s Confirm that the fan is spinning normally If it is not contact Buffalo technical support for assistance A rise in the system temperature may Do not place objects in the area have exceeded the allowable safety around the LinkStation Also move the value LinkStation to a cool location RAID array X cannot be mounted Run the RAID array disk check in Settings The bad sectors have reached a Replace the defective drive dangerous level Hard drive X may be disconnected Unable to find hard drive X or may have failed Shut down the LinkStation and reinstall the hard drive Format the hard drive After formatting if the error still appears after rebooting Unable to mount drive X replace the hard drive If the error is displayed again contact Buffalo technical support for assistance An error occurred so the hard drive was oae thes soie dus removed from the RAID array P y ES0 A hard drive error occurred Replace the faulty drive E07 E11 E12 E15 E16 E22 E23 E30 97 Amber If there is a status message the power LED will blink amber The pattern of the blink gives the information code You can also see any status messages in NAS Navigator2 The LED flashes for 1 0 seconds every 0 3 seconds This gives the tens place 10s Place of the information code The LED flashes for 0 5 seconds every 0 3 seconds This gives the ones place 1s Place of the information code Information Code Corrective A
81. sible during this period Do not change the order of the hard drives in the LinkStation For example pulling out drive 1 and replacing it with drive 2 may cause data to be corrupted or lost If a new drive is not recognized after installing it click Rediscover Disk in Settings Rebuilding the RAID Array from a Computer 1 Turn the LinkStation off and remove all cables 44 2 Squeeze the left side of the front panel and swing it open 3 Notes e Do not press hard on the top of the LinkStation e Pull the drive straight out the front of the chassis 4 Remove the drive from the cartridge 5 45 6 Replace the four screws 7 Insert the new drive in the empty slot 9 Connect all cables then turn on the LinkStation 10 For RAID O Navigate to Drives RAID in Advanced Settings Select the array with the error then click Delete RAID Array Navigate to Drives Drives Choose the new drive the unformatted one and format the drive After formatting the drive change the RAID mode For RAID 1 Navigate to Drives RAID in Advanced Settings Select the array with the error then click Recover RAID Array Follow the procedure on the screen to complete the hard drive replacement For JBOD Navigate to Drives Drives in Advanced Settings Format the new drive and create a shared folder before use Rebuilding the RAID Array from a Mobile Device You can also initiate the RAID rebuild from your mobile device 46
82. system tray when the computer is on Double click the o icon to start NAS Navigator2 Workgroup WORKGROUP 2 6 GB 916 7 GB 0 3 IP Address 192 168 10 20 Subnet Mask 255 255 255 0 Default Gateway 192 168 10 1 MAC Address 00 50 43 F6 3C BF Firmware 1 40 NAS Navigator version 2 71 Click your LinkStation s icon to open a share on the LinkStation and display e Total capacity e Capacity in use e IP address e Workgroup e Subnet mask e Default gateway e MAC address e Firmware version 90 Assigns the LinkStation s shared folder as a network Map Share aga Disconnect Share Unmaps the network drive Map All Remote Shares to Drive Assigns all the LinkStation s shared folders as network Letters drives Create Desktop Shortcut Creates a shortcut to the LinkStation s shared folder share Launch NAS Navigator2 on Launches NAS Navigator2 in the system tray when Startup Windows boots l If an error occurs an error message will pop up from the M APA Enor NAS Navigator2 icon in the system tray Opens the selected LinkStation s properties page Closes NAS Navigator2 Icons Displays icons View Details Displays hostname product name workgroup IP address subnet mask and default gateway If you have multiple LinkStations and TeraStations on the network you may choose to display them in order of hostname product name workgroup IP address subnet mask or default gateway Opens the LinkStation s s
83. t the content to be played back Note For more information on playing files see the DLNA compatible devices manuals Connected DLNA compatible Devices Follow the procedure below to view the DLNA compatible devices connected to your LinkStation 1 In Advanced Settings click Services A Services 71 2 Click Pf to the right of DLNA Server 3 Click DLNA Client Access Permissions 4 A list of the MAC addresses IP addresses and device names of the DLNA compatible devices connected to the same network as the LinkStation is displayed If your device is not listed click Refresh Database Enable DLNA Clients Refresh Database MAC Address IP Address Device Mame Allow 00 08 9b cO b 4e 192 158 11 77 amp D0 19 d1 83 19 d2 D0 1a 4b 49 38 80 D0 1d 73 87 35 19 D0 22 68 7d a3 73 D0 24 a5 5a 15 0fF 192 168 11 70 D0 50 43 82 64 75 OF Cancel Streaming to DLNA compatible Devices When new movies photos and music files are added to the LinkStation s DLNA folder the database must be updated before the new files can be streamed By default the database is updated when the files are stored in the LinkStation You can change this interval or update the database manually 1 In Advanced Settings click Services A Services 2 Click Pf to the right of DLNA Server 3 Click Edit 4 You may change the update interval or select Refresh Database to update the database immediately DLN
84. ted gt Change Administrator Password Change the administrator password For security please chocpe a nirw administrator peesword below Administrator Usemame admin Show entered password Password Confirm Password PD The password may include up to 20 alphanumeric characters hyphens underscores periods and symbols amp 0 5 jh WebAccess Configure WebAccess to access your LinkStation remotely Refer to the WebAccess section in chapter 5 for more information E oF WebAccess Status Disabled Number of Folders 1 BitTorrent Configure BitTorrent to download large files efficiently Refer to the BitTorrent section in chapter 7 for more information a oF BitTorrent Status Disabled DLNA Configure DLNA to stream media files to DLNA compatible devices on the LAN Refer to the DLNA section in chapter 7 for more information To3 CES 13 Opening Advanced Settings 1 Click Advanced Settings in Easy Admin BUFFALO ft eth vr Qr Or i admin a Rearrange Tiles m Language T Getting Started WebAccess BitTorrent DLNA Advanced Settings 2 Enter the administrator username and password then click OK Enter Username and Password El Log in as a different user Username admin WSeMdMe Password Time out Period 10 minutes unlimited 3 The Advanced Settings screen will open BUFFALO aA nh Ov Ov ov F amp A drin E Language English T Bg rue Shar
85. tely To put drives from an array into JBOD mode follow the steps below 1 In Advanced Settings click Drives s W Drives 33 2 Click f to the right of RAID w RAID 3 Click the array to delete RAID Array List Name RAID Made Amayl RAID Status Normal Unit Capacity Amount Used 516 6 GB Oca Used File System 0 00 e NFS Time Remaining 4 nr Options 4 Click Delete RAID Array Progress a 5 The Confirm Operation screen will open Enter the confirmation number then click OK Once JBOD is configured create shared folders on each drive to use them Changing RAID Mode To change the RAID mode first put the drives in JBOD 1 In Advanced Settings click Drives we Drives 2 Click to the right of RAID uc EZ RAID Pa 3 Click the array to delete RAID Array List ie Mame RAID Mode Status Unit Capacity Amount Used Used File System Time Remaining Progress Amayi RAIDI Normal 216 6 GB 0GB 0 00 XFS d nt k Options Close Note If the RAID Mode is blank the array is already in JBOD mode Proceed to step 7 Al Click Delete RAID Array 5 The Confirm Operation screen will open Enter the confirmation number then click OK 34 coickoxk 7 Choose a RAID array 8 Select a RAID mode and the drives to be used then click Create RAID Array Arrayi RAID Mode RAIDI s Add a dik to RAID array with RMM Your data wil be preserved Se
86. th the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Only use the cables and accessories that are included in the package Don t use other accessories or cables unless specifically instructed to in the documentation For Customers in Eu
87. timized Settings display are listed below iPhone iPad and iPod touch Android smartphones and tablets iOS 5 or later Android 2 3 or later 1 Open SP Navigator on your iOS device or 5martPhone Navigator on your Android device BUFFALO 2 Tap Open Settings lt NAS List LS220DC16 M LS220DC16 BuffaloNAS com name is not sel NAS Setup Configure WebAccess settings using the setup wizard Open Settings You can configure your NAS from Settings the web based user interface IP Address Settings Change IP address settings 15 3 Settings will be displayed BUFFALO re fi Ov Ov JL Users LL m f Folder Setup gt Sart WebAccess gt Status Disabled Off Qo Ee DLNA Server gt Status Disabled Off w USB Device gt Notes e The first time you go through setup you ll be given a chance to change the default password correct the time zone settings and select the RAID mode models with 2 drives only Step though the wizard to change these settings Ifyou tap any buttons you will need to enter a username and password e Tap Desktop to show Advanced Settings This screen gives the full array of settings that could be changed from a computer but is not optimized for mobile devices Settings That Can Be Changed from Your Mobile Device You can change the following settings from your mobile device e Create users change usernames and passwords Create shared folders e Confi
88. tions for LinkStation s shared folders There is no need to perform individual account management for the LinkStation If multiple LinkStations are installed on the network the account information is centrally managed in Active Directory greatly reducing the operations required for installation and management Note The LinkStation supports a domain environment with a maximum 1000 users and 1000 groups 10 000 users and 10 000 groups can be downloaded from the domain controller but are not supported 1 In Advanced Settings click Network if Network 25 2 Click Pf to the right of Workgroup Domain A Workgroup Domain Mrs pj 3 Click Edit al Select Active Directory and click Next Workgroup Domain Settings Authentication Method Workgroup C NT Domain Active Directory He xt Cancel 5 Click Yes 6 Enter the desired settings then click OK Active Directory Domain Settings e NetBIOS Name WORKGROUP DNS Name Active Directory Domain Controller Name Authentication Server Administrator Name Administrator Password WINS Server IP Address Required 7 In Advanced Settings navigate to File Sharing Folder Setup lee Folder Setup 2 Folder s pj 8 Click a shared folder that you want to set access restrictions for Shared Folder List amp 4 4 4 EZE unes an O click Edit 26 1 0 Enable Access Restrictions Access Restrictions amp Enable D
89. to put the LinkStation into sleep standby mode where the hard drive and LEDs are turned off 1 In Advanced Settings click Management Management 2 Click f to the right of Sleep Timer E Sleep Timer pz 3 Click Edit 4 Specify the timer interval wake up time and time to go into sleep mode then click OK Sleep Timer Settings Tamer 1 Schedule Weekly ur Monday Tuesday J Wednesday Thursday Friday Saturday Sunday Wake Upat 09 Hour OO Minutes Begin Sleep at 18 Hour 00 Minutes Timer 2 Schedule Disable n Timer Schedule Disahla x OK I Cancel J Notes e Up to three timers can be set e The time to enter sleep mode can be set from 0 00 am to 3 45 of the next day The time to wake from sleep mode can be set from 0 00 to 23 45 If the time to enter sleep mode is after 24 00 the wake up time setting may be from 4 00 am to 23 45 e The time to enter sleep mode should not be set at the same time as or before the wake up time e Ifa backup job is scheduled during a disk check disk format backup job or within 5 minutes of the current time the LinkStation will not change to standby mode when the time to enter sleep mode is reached e Ifthe scheduled times in the timer overlap operation is performed using the widest time interval e Examples of multiple timer settings are shown below Example 1 If running at a current time of 10 00 Wednesday Timer 1 Daily 12 00 24 00 Timer
90. twork address 0 0 0 0 255 255 255 0 Broadcast address 255 255 255 255 255 255 255 0 The IP address range from 224 0 0 0 to 255 255 255 255 NAS Navigator2 for Mac OS NAS Navigator2 is a utility that makes it easy to display Settings change the LinkStation s IP address or check its hard drive If you installed the LinkStation with LinkNavigator NAS Navigator2 was installed automatically 93 tl 1 a Click the icon in the Dock to start NAS Navigator2 eoo NAS Navigator2 w 5 gt Es a Open Refresh I m here L52 10DC BF LS210DCBF L5210D1 Workgroup WORKGROUP D i Ga Subnet Mask 255 255 255 0 USB HDD imag 3 7 CB 34 0 Default Gateway 192 168 10 1 MAC Address AA PE CCDDEE FF Firmware 1 40 E NASNavigator Version 271 Click your LinkStation s icon to open a share on the LinkStation and display e Total capacity e Capacity in use e IP address e Workgroup Subnet mask e Default gateway e MAC address e Firmware version Open Opens the default shared folder for a selected i LinkStation Searches for NAS devices on the network again Settings Opens Settings for the selected LinkStation Opens a window that lets you configure the NAS s IP Configure address or open Settings Label Color Selects the color of the name displayed below the icon View Optio
91. umbo frames will be used 4 Click Edit 87 5 Select your desired Ethernet frame size and click OK IP Address Settings LAN Port 1 DHCP 8 Enable Disable Ethernet Frame Size 1500 bytes Ethernet frame sizes of 1500 9216 bytes are supported The stated size doesn t include 14 bytes of header and 4 bytes of FCS The default frame size is 1500 bytes Frame sizes of 1501 bytes or more are considered jumbo frames Network Settings Default gateway and DNS server addresses cannot be changed because DHCP is enabled for LAN port 1 Required Data transferred by jumbo frames 4084 7404 9216 bytes LinkStation Jumbo Frames Jumbo Frame Jumbo Frame compatible compatible j Data transferred b LinkStation S y standard frames 1500 E a bytes Jumbo Frames Jumbo Frame Jumbo Frame compatible incompatible Data transferred by standard frames 1500 bytes LinkStation Jumbo Frames Jumbo Frame Jumbo Frame incompatible incompatible LinkStation 4 X No data transferred Jumbo Frames Jumbo Frame Jumbo Frame incompatible compatible Changing the IP Address Normally the LinkStation s IP address is set automatically from a DHCP server on your network If you prefer you can set it manually An easy way to do this is to change it from NAS Navigator2 running on a computer connected to the same router subnet as the LinkStation The procedure to change the IP address in Settings is below 1 In Ad
92. vanced Settings click Network ifs Network 88 2 Click Pf to the right of IP Address LAN Port 1 192 168 10 19 EP IP Address 3 Select the LAN port 4 dick Edit 5 Disable DHCP enter the desired network address settings and click OK IP Address Settings LAN Port 1 DHCP Enable Disable IP Address 192 168 10 8 Subnet Mask 255 255 255 0 Ethernet Frame Size 1500 w bytes Ethernet frame sizes of 1500 9216 bytes are supported The stated size doesn t include 14 bytes of header and 4 bytes of FCS The default frame size is 1500 bytes Frame sizes of 1501 bytes or more are considered jumbo frames Network Settings Default Gateway Address 192 168 10 1 Primary DNS Server 192 168 10 1 Secondary DNS Server Required Note The following IP addresses are reserved and should not be used If you configure one of them by accident initialize settings with the function button on the LinkStation Local loopback address 127 0 0 1 255 255 255 0 Network address 0 0 0 0 255 255 255 0 Broadcast address 255 255 255 255 255 255 255 0 The IP address range from 224 0 0 0 to 255 255 255 255 89 NAS Navigator2 for Windows NAS Navigator2 is a utility program that makes it easy to display Settings change the LinkStation s IP address or check its hard drive If you installed the LinkStation with LinkNavigator NAS Navigator2 was installed automatically NAS Navigator2 will run in the
93. ve ccce eee eee e eee eee ee eose 37 Connect an External Drive ecce eee eee eee e eee ee ee eese esee eee esses eese 37 COHmDAEHDII VJ coss vio iS veEVERRERVEVESE YER VS TEER ER ER EPEE VARRO TEE VER UE SUPE SRRNEEUENELYOE ERR FREU OPE 37 Disinountind Drivs seii EHSSYENI YVPAUNE ERAS SENS URS RI 0S PURI UNS eENE SPERA SYE VAS UE 38 Dismounting with the Function Button ee eee eee eere eee eee o sese 38 Dismounting from Settings on a Computer eee e ee eee eee ee eo eese 38 Dismounting from Settings on a Mobile Device 39 Checking Drives sossevesereberseessvvselesverva stet vistos va ebvePeevaS eu PA PR EHERP Y LEE RUE 39 Formatting DNV ES oes EE EEERERTI SEE FEEEEER REESE S VIVERE YER SELON VR IEAR UE 40 Erase Data on the LinkStation Completely 42 DISK QUOTAS aosoeeaiirai mi eier AE REN EVVRT KEEN TEENS ELEENVE FR FEE EES 42 Ouotas Tor USBIS ooo ci IE PRETEEEEEENSEREEAERRPRRSEIGE REOPLAEESUPAP E ESTEE 43 Quotas TOF Groups iiiter EE EUo e EEXERIR E ERROR TE ERU vERERER IIR ES I28 EIE HERNAN ER YE EERES 43 Hard Drive Replacement e eee e eee ee eee eee eee ee eee eese eoose 44 Rebuilding the RAID Array from a Computer e eee 44 2 Rebuilding the RAID Array from a Mobile Device 46 Chapter 5 Remote

Buffalo LinkStation 220

Contents

Download Pdf Manuals

Related Search

Related Contents