Tiptel 1030
Contents
1. 13 a 14 Phone Book ne ahad AR 14 Reset complete device back to factory settings 15 Factory Settings 23h he la 15 Contents Troubleshooting Power tallure 2 irn Technical data Warranty Guarantee Declaration of conformity 5 einen bike Safety notices Safety notices Please observe the following very closely when setting up connecting and using the telephone e Only plug the connection cables into sockets designated for this use e Lay the connection cables such that they do not pose any risk of accidents Connected cables must not be subjected to excessive mechanical stress e Set up the device away from electrical interference e Only connect accessories that are permitted for this device e Never open up the device yourself Do not use sharp or metallic objects to touch the plug contacts e Only use a soft damp cloth to clean the device Do not use chemicals or abrasi ve cleaners e Protect the device from damp dust liquids and vapours Do expose the device to direct sunlight Do not use the device in potentially explosive atmospheres e Only use the original telephone connector cable Safety notices Product fe2. call When you check the incoming calls press A to goto any call data Press and hold X MENU for seconds to delete all calls Call Back In on hook status press A to select the call you wish to dial from the Caller ID list Press d or pick up the handset to dial the phone number Phone Book Store Phone Book Memories In on hook status press JT LCD will display ADD SEARCH Press A a v to enter edit status Enter the name Press LT to access the telephone number input page and enter the telephone number Press LT to save and enter another name and phone number You can store 136 names and phone numbers at most in the phone book Once you reach 136 the LCD will display MEMORY FULL Review Phone Book Press LT to access the phone book page Press A and LCD will display PLS Input Name Enter the name to review the telephone number Press fa to review the phone book Alphabetical searching is supported If you enter a letter then you can review the phone book by the first letter of the name Delete Phone Book entries In phone book review status press hold X MENU for seconds to delete the name and number 14 Operation Dial from Phone Book In on hook status when reviewing the phone book and finding the number you wish to dial press d or pick up the handset to dial the stored phone number Reset complete device back to factory set
3. Manual en Feature Phone with hands free operation and telephone book tiptel 1030 tiptel 1031 lt Contents Contents Contents 3 Safety 5 5 Product 5 6 delivery Adeeb Ade atid iia in 6 Button allocation 7 Installation 9 Function 5 10 Set the KanQuage tics dean 10 Setthe a Rn Aline 10 Set Year Date and Time et Shi cee wan als 10 PABX Prefix 10 Set the Ring 5 11 Set the Ring Volume a ie 11 Set Flash TIME ainsaai 11 S tPa se 1 2 anne ernennen 11 Set DTMF or P lse 11 A 12 M ka 12 Answer 12 End aicall 12 Switching between handset and speakerphone mode 12 Microph ne m te u rn 12 Flash R key Transfer 12 Predial ae EI 13 Pausen a 13 13 Speed Dial Memories
4. ands Telefoon 036 53 666 50 Fax 036 53 678 81 e mail info tiptel nl Internet www tiptel nl Tiptel s a r l 23 avenue Ren Duguay Trouin 78960 Voisins Le Bretonneux France Tel 01 39 44 63 30 Fax 01 30 57 00 29 e mail support tiptel fr Internet www tiptel fr 12 2013 EDV 4932526
5. atures e Commercial grade high quality speakerphone e LCD displays phone numbers date and time e Hands free half duplex e Message Waiting Indication FSK 60 caller ID memories caller list e Last 16 dialed numbers review and redial e FSK DTMF caller ID available e 135 phone book entries e Auto redial function LCD contrast adjustable e Transfer function R key for use with a PABX e Mute function 16 melodies selectable for ringing e Pause time 1 2 2 4 3 6s adjustable for use with a PABX e Flash time adjustable 100ms 200ms 300ms 400ms 600ms 900ms e Supports both pulse and tone DTMF dialing Redial key e Volume 8 levels adjustable for speakerphone and ringer 4 levels adjustable for handset receiver Scope of delivery e Telephone device with coil cord and handset e Telephone connection cable e Telephone socket adapters some country versions only e Manuals in German and English language more languages are available at http www tiptel com Button allocation Button allocation Go tiptel 1081 14 1 13 2 11 1 LCD Display Displays the phone number date and time and other information 2 X MENU a Press to delete or edit the phone book and one touch memories b Press for min 3 secs to enter the main function settin
6. book operation 14 Hook switch Press to end a call handset on off hook Installation Installation 1 Connect one end ofthe coil cord to the jack of the handset 15 connect the other end to the jack of the base unit Plug one end of the flat cable to the line jack 16 of this phone plug the other end to the telephone wall socket Fit the stand supplied as shown Ensure the stand audibly clicks into place The phone can be used with and without the stand 12 11 1 16 E 15 Function Setup Function setup Every function setup is available by using just a single key In on hook status press X MENU for a minimum of seconds to enter the function menu Pressing the very same key X MENU repeatedly will show the different functions available one after another Please refer to the list below for setting up each function You may escape the setting menu going off hook for a second Set the Language In on hook status press and hold X MENU for seconds to enter LANGUAGE SETUP Press to select the language Press X MENU to confirm Set the Contrast After set up the LANGUAGE press X MENU to access LCD CONTRAST setup LCD will display SETTING CONTRAST The default setting is 4 Press 4 v to select the contrast 1 5 Press X MENU to con
7. d tone DTMF dialing 1 2 2 4 3 6s adjustable for use with a PABX 100ms 200ms 300ms 400ms 600ms 900ms 3 5 settings FSK or DTMF 20 digits 60 caller ID memories Last 16 dialed numbers 135 entries 0 40 C 16 half duplex Your point of contact for warranty obligation benefits is the specialist retailer where you acquired your device Warranty conditions are based upon the legal regulations of the country in which the device was purchased Your specialist retailer will be glad to provide more in formation 17 Appendix Guarantee Tiptel provides a voluntary guarantee on the device the conditions of which are published on http www tiptel com The guarantee conditions applicable at the time of purchase apply The original sales slip receipt bill with serial number and or IMEI number is used as proof of purchase Please keep these documents in a safe place Declaration of conformity This device is approved for the connection and use within the analogue public tele phone networks in all EC countries according to the European Requirements Due to technical deviations in individual countries we cannot grant an unlimited guaran tee for the successful operation at all types of telephone accesses This device satisfies the requirements of the EU directive on radio and telecommu nication terminal equipment and the mutual recognition of their conformity The CE mark on the device confirms conformity with the abov
8. e directive We hereby declare that the device satisfies all fundamental requirements of Euro pean directives For details on the declaration of conformity please visit http www tiptel com Disposal Packaging Dispose of card and cardboard boxes in the used paper container and throw plastic parts into a recycling container Device disposal Used electrical devices should not be disposed of in the house hold waste Dispose of the device at your local collection points scrap or recycling yards Please contact your local authority for information on disposal sites amp 18 Tiptel com GmbH Business Solutions Halskestra e 1 40880 Ratingen Deutschland Tel 0900 100 84 78 35 Vanity Tel 0900 100 TIPTEL Internet www tiptel de International www tiptel com 1 49 Euro Min aus dem Festnetz der Deutschen Telekom abweichende Mo bilfunkpreise m glich Tiptel AG Bahnstrasse 46 8105 Regensdorf Schweiz Suisse Svizzera Tel 044 843 13 13 Fax 044 843 13 23 E Mail tiptel tiptel online ch Internet www tiptel online ch Tiptel NV Leuvensesteenweg 510 bus 4 1930 Zaventem Belgique Belgi Tel 0903 99 333 Fax 02 714 93 34 E Mail tech tiptel be Internet www tiptel be 1 12 Euro Min Tiptel GmbH Ricoweg 30 B1 2351 Wiener Neudorf sterreich Tel 02236 677 464 0 Fax 02236 677 464 22 E Mail office tiptel at Internet www tiptel at Tiptel B V Camerastraat 2 1322 BC Almere Nederl
9. ect MWI switch setting Move the MWI switch to SR Incorrect or no connection when dialling from telephone systems The outside line prefix for the public telephone network has not been entered Enter the outside line prefix No caller ID with incoming call Your network provider or telecommunication system does not support this function or the function is not enabled The caller has suppressed the sending of the call number or is ex directory The call is from a telephone network that does not support the sending of call numbers Ask your network provider or telecommunication system manufacturer if the function is available or if it needs to be enabled 16 Power failure Appendix The internal clock stops if there is a power failure the telephone network All set tings are retained however meaning the settings stay as they were before when power is restored All you need to do is reset the clock Technical data Dimensions W x H x D Weight Telephone cable Volume Dialing Pause time Flash time adjustable Speed dial memories LCD contrast Caller ID Length of Caller ID Caller list Redial Phone book Ambient temperature Ring melodies Speakerphone Warranty 210 x 153 x 100 mm approx 610 2 8 levels adjustable for speakerphone 4 levels adjustable for handset receiver Supports both pulse an
10. firm Set Year Date and Time After set up the LCD CONTRAST press X MENU to access the YEAR DATE and TIME setup The digits of the year will flash Press A to select the year Press X MENU to confirm Then digits of the month will flash Press v to select the month and press X MENU to confirm Use the same method to set up the date and time maybe set automatically by the network operator or PABX PABX prefix After set up the YEAR DATE amp TIME press X MENU to access PABX prefix setup The first digit will flash Press 4 v to select the digit and press X MENU to save selection Use the same method to continue setting other digits When the phone is operated behind a PBX PABX prefix can be set for dialing out side phone numbers and a pause will be added automatically between the Ext No and the phone number you dialed E g If you set up the Ext No as 0 and dial from the phone book the number stored as 0021024280 will be practically dialed as 0 pause 021024280 see Set Pause Time 10 Function Setup Set the Ring Melodies After set up the EXT NO press X MENU to access the RING MELODIES setup Press 4 to select the melody 1 16 and press X MENU to confirm Set the Ring Volume After set up the RING MELODIES press X MENU to access the RING VOLUME setup Press to select the r
11. gs c In main function settings press to enter and confirm the data 3 A Review incoming call list select and scroll through settings 4 a In on hook status press for min 3 secs to adjust the ringer volume b While using the speakerphone press to adjust the speakerphone volume c While using the handset press to adjust the handset volume Volume may be changed using keys 5 0 9 a Dialing keys b While editing phone book used for letters as well 0 for space for symbols Button allocation 6 P a In on hook status press to review the outgoing number b In off hook status press to dial the last dialed number Insert a pause of 1 2 2 4 or 3 6 secs while editing the phone book pre dialing a number 7 Press to mute the line microphone mute 8 d a Press for handsfree dialing and speak without lifting up the handset b Indicator will light up when the unit is in use off hook c Indicator will flash when the unit has a new call d Indicator will flash when the unit receives message waiting signals 9 R a For PABX use Recall used to transfer calls b On public lines initiate functions on the public telephone line 10 gt Press to store telephone numbers in the one touch memories 11 One Touch Phone numbers may be stored for speed dialing speed dial memories M1 M3 12 Speaker Used for hands free calls used for ringer as well 13 Press to enter the phone
12. hen the called party answers the phone the LCD will time the call automatically In pulse dialing mode it is possible to temporarely switch to DTMF tone dialing mode during a call pressing Afterwards dialing is in DTMF mode Answer a Call Pick up the handset or press d to answer the call End a call Hang up the handset or press d to end the call Switching between handset and speakerphone mode Switch talk mode from handset to speakerphone Press d and then hang up the handset and talk using the speakerphone Switch Talk Mode from Speakerphone to handset Pick up the handset and the talk mode will switch to handset automatically Microphone mute In talk mode press and the call will muted If you hang up the handset the call will be ended To release the mute function press again Microphone will be switched on Flash R key Transfer a call This function is mainly for PBX systems If you have call waiting service from your network provider it will also work for call waiting service a Press R for call waiting service from your network provider b Press R to transfer a call to another extension within a PABX 12 Operation Note Please check flash timing in case of problems PABX setting usually is 100 ms while network providers may use 100 ms or 300 ms Please ask your network provider or PBX installer in case this device is used behi
13. ing volume 1 8 and press to confirm Set Flash Time After set up the RING VOLUME press X MENU to enter the FLASH TIME setup Press A fm to select the flash time 100ms 200ms 300ms 400ms 600ms 900ms and press X MENU to confirm Please ask your network provider or PBX installer in case this device is used behind a PBX for the appropriate setting Set Pause Time After set up the FLASH TIME press to enter the PAUSE TIME setup Press A v to select the pause time 1 2s 2 4s 3 6s and press X MENU to confirm Dialing out the device will create a pause of the selected length after dialing the dig its stored in EXT NO see Set Ext No This pause time will be used when press ing or using the telephone book accordingly Set DTMF or Pulse Mode After set up the PAUSE TIME press X MENUj to access the DTMF or PULSE MODE setup Press A v to select the mode DTMF or PULSE and press X MENU to confirm Please ask your network provider or PBX installer in case this device is used be hind a PBX for the appropriate setting It is possible to temporarely switch from pulse to DTMF tone dialing mode during a call pressing 11 Operation Operation Make a Call Pick up the handset or press d to get dial tone and dial the number Use X MENU to edit the number W
14. nd a PABX for the appropriate setting Pre dial In on hook status type in the phone number and then pick up the handset The number will be dialed automatically Pause Press for a break off of 1 2 2 4 3 6 seconds depending on setting Redial Auto redial In on hook status press GB P to review the last 16 dialed numbers Pick up the handset or press d to dial the reviewed number Speed Dial Memories Store In on hook status press gt Input the phone number you wish to store as one ofthe speed dial memories Press the specific one touch speed dial memory key 1 which you would like to save the phone number with to finish the setting Dial Pick up the handset or press d Press 2 3 to dial the stored phone number automatically Or In on hook status press 2 3 to see the stored phone number Press d or pick up the handset to dial the number Delete In on hook status press M1 M2 M3 to see the stored phone number Press X MENU several times to delete single digits from backwards Press and hold for seconds to delete the complete number shown 13 Operation Galler ID list Review In on hook status press A to review the caller s phone number and the time they called Delete When you check the incoming calls press A to find the call you wish to de lete Press X MENU once shortly to delete a single
15. tings In on hook mode press R for more than 8 seconds This clears all memory incl Phone Book and all settings The device is back to initial factory setting after some seconds Factory settings LCD contrast 4 Ringer melody 9 Ring volume 8 Flash time 100 ms Pause time 3 6 8 Dialing mode tone DTMF 15 Appendix Troubleshooting Appendix If you have difficulties on your phone s operation the suggestions below should solve the problems Problem Possible cause Solution recommendation No display no dial tone Connector cable not making contact Check all cables and plug connections Display too light or too dark Contrast not set correctly Adjust the contrast No incoming calls being indicated in the telephone system No call signal connected Check the programming of the telecommunication system Buzzing or other interference in the loudspeaker or receiver Interference from cordless telephone cordless headset monitor etc Change the location The clock shows the wrong year but date and time are right The date and time are sent by the telephone network The year is not sent Set the year manually The time and date are incorrect after a call The time and date are not being sent correctly by your telecommunication system Adjust the clock in your telephone system The LED light is permanently on Incorr
Download Pdf Manuals
Related Search