Levana BABYVIEW20
Contents
1. Live Customer Support Your BABYVIEW 20 uses digital transmission to ensure a clear and consistent iio The signal also passes easily through interior walls However uildings with metal frames or placing the camera near large metal objects may cause degradation If reception is poor moving the camera or receiver may tix this problem Monitor De EA na OOND LCD screen Antenna Music selection buttons VOX Voice Operated Transmission button Power indicator LED Link indicator LED Volume indicator LED Speaker VOX Voice Operated Transmission indicator LED Music indicator LED Brightness adjustment buttons Power Volume control Power adapter jack Battery compartment Belt Clip Stand Camera a Antenna Power indicator LED Infrared LEDs Lens Magnetic Base Night Light Night Light button Microphone Speaker Battery compartment Power ON OFF switch Power adapter jack CAMERA SETUP You can use the supplied AC adapter 4 AAA batteries not included to power your camera Before starting switch the power to the OFF position If using batteries Note Use new batteries Do not mix old batteries with new ones Remove the batteries from the camera if you do not plan to use it for an extended period of time 1 Use a flat head screwdriver open the battery compartment cover on the back of the camera 2 Insert 4 AAA batteries according to the and signs Close the bat2. E ESF _ YF ea cone asses saa IY 4 MONITOR 4 Adjusting The Monitor 7 Sound Activation a Ga a GN CF RF 7 Lullaby Sounds meu eu nng I oa EET EE a TE DE DA P PIC CET 8 AW A O te OF ER CW satge 9 TROUBLESHOOTING 7 WY 10 10 TPS FYN Y r NF RTH NEA NF 11 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to ro idk reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy andi not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is conne
3. LIFE BUZZ AWARD www mMmyLevana com WARRANTV INFORMATIONS Please visitiourweb site atwww MyLevana com forinformation aboutsyour product suvarranty We take quality very seriously This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials If you have warranty or support issues please contact us using any of the following methods Support www mylevana com contact LEVANA Canada LEVANA USA Web site www myLevana com 4080 Montrose Road 60 Industrial Parkway 764 Niagara Falls ON Cheektowaga NY Canada L2H 1 9 USA 14227 Warranty Terms 1 LEVANA products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials This warranty is limited to the repair replacement or refund of the purchase price at LEVANAS option 2 This warranty becomes void if the product shows evidence of having been misused mishandled or tampered with contrary to the applicable instruction manual 3 Routine cleaning normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty 4 The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty expressed or implied is provided LEVANA assumes no responsibilities for any other claims not specifically mentioned in this warranty 5 This warranty does not cov
4. YVIEW 20 system lets you turn off the monitor while you are sleeping and will automatically turn back on if your child starts to cry or make noise 1 Press the VOX button on the left side of the monitor This will turn off the screen but the VOX LED on the front of the monitor will glow blue 2 When the sound from the camera reaches the set level the screen will turn on automatically It will turn off again after 30 seconds NOTE The preset noise level is preset to a level comparable to a casual conversation Lullaby Sounds The camera plays a selection of lullabies that you can control with the monitor With a push of a button you can start playing music change the song and stop the music remotely when your baby is asleep There are 3 ditferent chiming melodies that can sooth your baby to sleep 1 Press the play button P ll on the top left hand side of the monitor This will activate the music on the camera If you turn up the volume on your monitor you will hear it The music note LED on the front of the monitor will glow RED when a lullaby is turned on 2 Press the play button P ll again and the music will stop Press the next button PPI to skip to a different song e You can see the music you choose on the LCD screen the music you have to choose from includes 1 Twinkle Twinkle little star 2 Hush a Bye 3 Rock a bye Baby SYNCING CAMERA AND MONITOR The monitor s range is approximately 100 fe
5. a child STATEMENT ON REGULATION 4 These units are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 9 or relocate the receiving antenna Increase the separation between the equipment and receiver e the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer experienced radio TV technician for help Operation with non approved equipment or unshielded cables is likely to result in interference to radio or TV reception The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user s authority to operate this equipment e Wireless Monitor e Magnetic Base for Camera e Wireless Camera Instruction Manual e Rechargeable Lithium ion Battery 1 Year Warranty 2 Power Adapters e Lifetime
6. cted Consult the dealer or an experienced radio TV technician for help e FCC Label Compliance Statement e This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user s authority to operate the equipment ARE AND MAIN e not store in very cold areas When the system warms up to its normal temperature moisture can form inside the case which may damage electronic circuit boards e Do not attempt to open the case Non expert handling of the internal components may damage the system e Avoid dropping or strong shocks e Operate this product using only the power supply included or provided as an accessory Do not overload electrical outlets or extension cords this can result in tire or electric shocks Read and Instructions All the safety and operating instructions should be read before the video baby monitor is operated This product cannot replace responsible adult supervision Strangulation Hazard Children can become entangled in cords Povver cords should be kept more than 3 feet away from the crib and baby
7. e The power LED will turn OFF when charging is complete Charging time is approximately 3 hours When charging is complete unplug the monitor from the AC adapter Turn ON the monitor by turning the volume knob on the side of the unit You will feel a slight click when it turns on When the monitor is on the POWER LED on the monitor will light up RED The POWER LED will blink when the battery needs to be charged Follow the above steps to recharge the battery MON If using with AC adapter 1 Plug one end of the provided power adapter into a wall outlet both camera and monitor power adapters are interchangeable 2 Connect the other end of the power adapter into the power input on the monitor 3 Turn on the monitor by turning the volume knob on the side of the unit You will feel a slight click when it turns on 4 monitor is the POWER LED on the monitor will light up RED Note The battery does not need to be inserted to operate the monitor from a wall outlet However keeping the battery in the unit will ensure that it is charged when you need unplug it from the wall Note It takes approximately 3 hours to fully charge your monitor battery 1 If the image on the LCD screen is too bright press the button lower button to darken the screen 2 If the image on the LCD screen is too dark press the Xt button higher button to brighten the screen Sound Activation VOX The BAB
8. er the shipping cost insurance or any other incidental charges 6 You MUST contact LEVANA before sending any product back for repair You will be sent a Return Authorization form with return instructions When returning the product for warranty service please pack it carefully in the original box with all supplied accessories and enclose your original receipt or copy and a brief explanation of the problem include RA 7 This warranty is valid only in Canada and the continental U S 8 This warranty cannot be re issued Video Baby Monitor w Night Light Lullaby Camera Congratulations You ve just taken a step to help ensure your child s safety and enjoy more of your child s special moments Please take a few minutes to read this manual so you can use this monitor to its full potential If you have any questions on your product please visit www MyLevana com for troubleshooting information AV o N TABLE OF CONTENT Y E FY FWY NN i A IE NE Pee CC FR EA AC FN Y mt ii CARE AND ii SAFE P INSIRUCTIONS FAD iil WHATS INCLUDED seat case e FFR RY iv KNOWING YOUR BABY 1 CAMERA UE i E FA DY GEO 2 Mounting The Carmen iia GYD O ES 3 Using The Night LGM RR _ _ _ _ _ 4 BO
9. et 30 meters 150 feet 46 meters clear line of sight from the camera Many factors may increase or decrease the maxi mum wireless range The link LED will be green when the monitor and camera are paired and red when they are not paired OUT OF RAHGE If the signal is lost between the monitor and the camera the message OUT OF RANGE will appear on the monitor This could be caused by the camera having no power or the distance between the camera and monitor being too far Try moving the camera and monitor closer together if this does not fix the issue try syncing the monitor and camera Syncing the monitor and camera may also improve the audio guality e To sync the monitor and camera 1 With both units powered on press the VOX button on the monitor and the night light button on the camera at the same time Hold both buttons down for approximately 5 seconds 2 The words Signal Searching will appear on the monitor 3 Once the night lights stars on the _ blink three times the camera and monitor will been synced and you can properly view your camera on your handheld monitor If you are not getting any signal at all Make sure the camera and the monitor are turned on Make sure the power plugs are pushed all the way in If the camera monitor is powered by batteries replace all batteries with new ones If the signal is poor or there is interference If there is a micr
10. owave oven in use in the path between the camera and monitor turn off the microwave Make sure the camera and the monitor are within range of each other optimal range of approximately 100 ft 150 ft a clear line of sight ADDITIONAL INFORMATION Keep all parts and accessories out of young children s reach datada or dirt on the lens surface can adversely affect camera performances Avoid touching the lens surface with your fingers Should the lens become dirty use a blower to blow off dirt and dust or a soft dry cloth to wipe off the lens Keep the camera dry Precipitation humidity and other liquids contain minerals which will corrode electronic circuits Do not use or store in dusty dirty areas Do not store in hot areas High temperatures can shorten the life of electronic devices and warp or melt certain plastics If the power LED is on but only voice signal input is detected the monitor may be in voice activated mode Press the VOX button OFF to turn on the screen The VOX LED should be off to indicate the unit is in normal operation mode If this does not work try to sync the camera and monitor again A The rechargeable battery of the handheld monitor is a built in lithium polymer battery Before using the monitor with battery power please read the following in order to use the battery properly 1 10 11 Under normal temperatures the battery be recharged at least 300 times If the bat
11. ress the LIGHT button This will turn ON OFF the night light stars The night light will remain on until the button is again NOTE We do not recommend using batteries with the night light The battery life will be less than 2 5 hours with the night light on Using Night Vision The camera has nine night vision LEDs allowing you to view your baby in the dark The camera has a light sensor and will activate the A N vision only when it gets dark When you turn off the lights you wi ill notice a faint red glow in the front of the camera these are the LEDs lit up y AO LO You have the option to use either supplied AC adapter or included rechargeable lithium ion battery to power the monitor If using the included rechargeable battery 1 2 3 Turn the monitor OFF Rotate the clip on the back of the monitor to an upright position Slide open the battery compartment cover on the back of the monitor Insert the battery with its connections matching the connections in the monitor Close the battery compartment cover and make sure it is locked securely Your battery will need to be charged for initial use Plug the AC adapter into a wall outlet and the other end into the monitor both camera and monitor power adapters are interchangeable If the monitor is OFF the power LED will turn BLUE to indicate that charging is in progress If the monitor is ON and charging the power LED will be purpl
12. s reach at all times Baby monitors with power cords should never be hung on or near the crib Water and Moisture This product is designed for indoor use only The unit should not be exposed to rain moisture or splashing No objects filled with liquid should be placed on top of or beside the product such as a glass or vase This item should not be near water Non Use Periods Always unplug the AC adapters from the wall outlets during long periods of non use Ventilation This baby monitor should not be used on a bed sofa rug or similar surface that may block the ventilation openings or be placed in an enclosed area such as a bookcase or drawer that may impede air flow Keep Away from Sources of Heat This unit should not be exposed to direct heat sources such as a candle fireplace radiator heat register stove or other appliance that emits heat The unit should not be left in direct sunlight Power Source This unit should only be used with the AC power adapters included in this package rated 6V 800mA Damage Requiring Service This unit should be serviced by qualified personnel only when a Objects have fallen or liquid has been spilled into the product b The units have been exposed to rain c The units do not appear to operate normally or exhibits a distinct change in performance The units have been dropped or the enclosure damaged Caution This product cannot replace responsible adult supervision of
13. tery compartment cover and tighten the screw to hold it in place 3 Slide the POWER switch to the ON position The LED on the front of the camera will light up red The LED on the camera will remain red until the batteries lose power Change the batteries when the LEDs are red and blinking Upon startup the LED will be red NOTE Batteries in the camera will last a maximum of 4 5 continuous hours For best results use Lithium lon AAA batteries Use batteries only when necessary If plugging into a wall outlet 1 Plug one end of the provided power adapter into a wall outlet Camera and monitor power adapters are interchangeable 2 Connect the other end of the power adapter into the power input on the camera This is located under the ON OFF switch 3 Turn the ON OFF switch to the ON position The LED on the camera will light up RED Mounting the Camera Using the Magnetic Base The camera has an innovative and convenient magnetic base that magnetically holds the camera securely This allows you to freely rotate the camera left right up and down with ease 1 Place the camera amp magnetic base on a flat surface at least 3 feet away from your baby s crib 2 Rotate the camera freely and aim it in the direction you would like to monitor Avoid placing at an angle over 30 degrees as the camera may fall out The magnetic strength is lower over the battery compartment Using the Night Light e P
14. tery is not already full make sure that the battery is charged AU use When the device is not in use switch the unit off to maintain battery power Unplug the power adapter when not in use In colder environments the unit will consume more power Please keep this device at room temperature to increase the usable power In environments with low temperatures it will take longer to recharge than in normal temperature environments To avoid danger do not use the power adapter in high temperature and high humidity locations It is normal for the unit s battery to feel slightly warm while the monitor is in use or is charging Do not leave the power adapter connected for an extended period of time For your own safety the battery is set to stop charging when the battery temperature is higher than 45 C or lower than 57C Charging will automatically resume once temperatures are back to normal In order to avoid damaging the battery do not expose the monitor to high temperature environments 45 C or above Even if the battery is fully charged power will gradually be lost it the monitor is not eed for an extended period Make sure to recharge if the unit has not been in use for a long period of time Always use the supplied power adapter only to recharge the monitors battery Using any other power adapter could ruin the monitor or cause extreme burns
Download Pdf Manuals
Related Search