ViewZ VZ-WM05 flat panel wall mount
Contents
1. INSTALLATION MANUAL LCD Wall Mount CAUTION DO NOT EXCEED RATED LISTED WEIGHT SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR Secure your display to the mount by tightening screws just removed Maintenance e Check that the bracket is secure and safe to use at regular intervals at least every three months OUNT fag e Please contact your distributor if you have any questions ISSUED JUL 2013 7 NOTE Read the entire instruction manual before you start installation and assembly Component Checklist IMPORTANT Ensure that you have received all parts according to the component checklist prior to installation If any parts are missing or faulty telephone your local distributor for a replacement AN WARNING e Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet If you have any questions regarding any of the instructions or warnings please contact your local distributor e This mounting bracket was designed to be installed and utilised ONLY as specified in this manual Improper installation of this product may cause damage or serious injury e This product should only be installed by someone with good mechanical ability who has basic building experience and fully understands this manual e Make sure that the supporting surface will safely support the combined weight of Pack M the equipment and all attached hardware and c2. de hardware for other types of mounting situations e Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components 344 gt gt gt 4 3 Installing the VESA Plate 4 Installing the Display ZX Tighter all screws but do not over tighten Lift the display aligning holes in the VESA plate with the mount holes in the wall plate on gt gt 6
3. omponents acnage e If mounting to wood wall studs make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended e Always use an assistant or mechanical lifting equipment to safely lift and position sn mw the equipment M4x14 x4 M5x14 x4 D5 washer x4 M A M B M C e Tighten screws firmly but do not over tighten Over tightening can cause damage to the items This greatly reduces their holding power e This productis intended for indoor use only Using this product outdoors could lead to product failure and personal injury Package W ST5 5x50 x2 concrete anchor x2 W A W B 1 2 1 Separating the VESA Plate 2b For Solid Brick and Concrete Mounting Use tool to loosen the bottom screws in order to separate the VESA plate from the wall mount Mark the exact location of mounting holes SS a amy TA AT eS Find and mark the exact location of mounting holes Drill pilot holes CIEE Screw the wall plate onto the wall Screw the wall plate onto the wall N WARNING WARNING e Make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components e Installers are responsible to provi
Download Pdf Manuals
Related Search