Scosche TA2052BLKB car kit
Contents
1. RADIO REMOVAL 2005 UP TOYOTA TACOMA 1 Using a pick tool carefully pry out the A C controls 2 Remove 4 10mm bolts securing the radio to the dash Disconnect radio and remove KIT PANEL ASSEMBLY A ATTACHING THE REAR BRACKETS 1 Align the two 2 screw hole locations to the matching locations on pocket When aligned slide the bracket together Screw the two 2 supplied screws to screw hole locations B HAZARD CLOCK DISPLAY REMOVAL INSTRUCTIONS AND REATTACHMENT Remove the 2 small Phillips screws from each side of the factory radio that secure the radio to the rear of the radio face and pull the radio assembly away from the back of the face of the radio and set aside with the screws that were removed 2 Using a small flat blade screwdriver carefully remove the hazard clock display panel by prying the thin plastic strip from around the instrument housing outward to release the hazard clock display from the housing There are 2 retaining snaps on the top side and the bottom side and 1 on each edge 3 Once the module is removed carefully remove all plastic mounting clips from the factory panel and reattach them to the corresponding mounting clips on the 5886 panel 4 Slide the hazard clock display panel into the housing on the 5886 panel until it snaps and locks into place C DIN AND ISO INSTALLATION 1 For DIN mount application slide into radio opening RADIO S 2 For ISO installation attach I2. SO brackets by SLEEVE sliding into sides of DIN opening wall OPTIONAL ISO DIN TRIM BEND TABS OUTWARD SCOSCHE TA2052B IN DASH INSTALLATION KIT FOR 2005 UP TOYOTA TACOMA DIN KIT 5742 LEFT BRACKET 5892 MOUNTING z NN SUPPORT BRACKET 5886 MOUNTING PANEL 5742 RIGHT BRACKET 5894 TRIM RING INTRODUCTION PRELIMINARY Thank you for purchasing the Scosche TA2052B Kit This Kit was manufactured with the highest of quality standards NOTES e See your vehicle s instructions for any special tools your installation might require e Read all instructions accompanying your car stereo cassette player for proper wiring and mounting instructions FACTORY WIRING CODES For Factory Wiring Codes go to www scosche cars com LIABILITY DISCLAIMER This instruction booklet is based on carefully documented data and research of automobile dash disassembly wire harness codes and information pertaining to installation of this kit in the listed vehicles Scosche Industries Inc cannot be held responsible for discrepancies inconsistencies that may occur due to the automobile manufacturing changes or options or damage that may occur in the automobile during the installation of components while using this booklet TECH HELP 1 800 621 3695x3 TA2052B 3 07 3000464 If you have any further questions call 2007 SCOSCHE INDUSTRIES INC
Download Pdf Manuals
Related Search