CyberPower RB1280X2D
Contents
1. yberPower Reliability Quality Value BATTERY REPLACEMENT KO09 0000065 00 yberPower Reliability Quality Value BATTERY REPLACEMENT KO09 0000065 00 Intelligent LCD Series MODEL CP600LCD CP825LCD CP800AVR CP685AVR G CP825AVR G CP685AVRLCD G CP825AVRLCD G Ww N gt Place the UPS on its top and remove the retaining screw figure 1 Slide the battery compartment cover completely off of the unit figure 2 Remove the battery from the compartment and disconnect the battery wires from the battery Install the replacement battery by connecting the red wire to the positive terminal and the black wire to the negative terminal of the battery figure 3 Slide the battery compartment cover over the battery and tighten the retaining screw Charge the unit for 4 8 hours to ensure the UPS performs expected runtimes MODEL CP850AVRLCD CP1000AVRLCD Place the UPS on its side and locate the battery compartment cover on the bottom of the UPS Remove the four 4 retaining screws and pull the battery compartment cover off the UPS figure 1 amp 2 Remove the battery from the compartment and disconnect the battery wires from the batteries Install the replacement batteries by connecting the red wire and black wire to the same color wires from the battery pack Put the battery pack into the compartment figure 3 Slide the battery compartment cover over th2. e battery and tighten the retaining screw Charge the unit for 4 8 hours to ensure the UPS performs expected runtimes AVR Series MODEL CP900AVR CP1200AVR CP1500AVRT CP1285AVRLCD CP1350AVRLCD CP1500AVRLCD NOOR WD Place the UPS on its side to locate and remove the front panel retaining screws from the bottom of the UPS Slide the cover front panel towards the bottom of the UPS Remove it from the unit Disconnect the cable located at the top of the cover Disconnect the battery wires from the batteries Remove the batteries from the compartment Install the replacement batteries by connecting the red and black wires to the same color wires from the battery pack Put the battery pack back into the compartment Replace the battery compartment cover and tighten the retaining screw Charge the unit for 4 8 hours to ensure the UPS performs expected runtimes Professional Tower Series MODEL PP800SW Carefully placed the UPS on its side Remove the 2 retaining screws then push the battery cover backward and remove the cover 2 Disconnect the battery wires from the battery and then remove the battery from the compartment REMINDER For PP800 PP1100 PP1500T 2 batteries are attached with one single plastic strip You can pull the plastic strip to pull out the battery 3 Install the replacement battery by connecting the red wire to the positive terminal of the battery and connecting th
3. e black wire to the negative terminal of the battery 4 Slide the battery back into the compartment Carefully turn the UPS upside down to help the batteries slide all the way into the compartment Replace the cover and the retaining screws Recharge the unit for 4 8 hours to ensure the UPS performs expected runtime MODEL PP1500SWT4 PP2200SW 1 Carefully turn the UPS on its side Remove the 6 retaining screws and the cover 2 Disconnect the black and red cable from the battery set 3 Remove the battery protection cover and take the battery pack out of the compartment 4 Slide a new battery pack into the unit Assemble the battery protection cover cable screws in the reverse order of the previous steps Recharge the unit for 4 8 hours to ensure the UPS performs expected runtime
Download Pdf Manuals
Related Search