Uniden UBR223
Contents
1. Quad mode Monitor displays video from all cameras on a single screen in 4 quadrants Any channel that does not have a camera is blank Single mode Monitor displays video from one camera at a time Scan mode Monitor displays video from one camera at a time but cycles through all cameras one by one Use CHP or CH4 to cycle through these modes Your system comes with a single camera therefore it only displays in Single mode in Live view or a single quadrant in Quad view Common Operations To Do This Change between quad view single view and scan for Live view Press CHP to cycle through the Live modes in the following order CAM1 CAM2 CAM3 CAM4 QUAD AUTO Scan CAM1 Check the temperature The temperature displays on the monitor screen when the camera is in full screen mode See page 21 Turn on the night light Press NIGHT LIGHT on the side of the camera page 11 or on the monitor page 13 See page 28 for details Set the date and time See page 19 Set the room temperature See page 22 range for the temperature alert Use the Lullaby function See page 28 Adjust UBR223 volume Press AVol increase volume or WVol decrease volume on either the camera or the monitor Use the Intercom 1 Press and hold TALK on the monitor 2 Speak into the microphone 3 Release to hear reply SYSTEM MENU DESCRIPTIONS Press MENU OK to access system m2. 3 Press MENU OK to save the setting and return to the main System options The new brightness level displays the next time you are in Live view Factory Reset This option allows you to restore your system to factory settings Default No 1 From the System menu select Factory Reset and press MENU OK The Factory Reset screen isplays displays to Factory Reset A Reset to Factory Defaults i Yes 2 Press AVol or WVol to select or cancel a reset to factory defaults 20 3 Press MENU OK to save the setting and return to the main System options Camera pairing settings and Date Time setting will NOT be affected by a reset Cameras will remain paired with the monitor Language This option allows you to select the system s display language from English Espanol or Frangais Default English 1 From the System menu select Language and press MENU OK The Language screen displays 2 Press AVol or WVol to select a language 3 Press MENU OK to save the setting and return to the main System options Temperature Display Unit This option allows you to set the temperature to display in Celsius C or Farenheit F Default F 1 From the System menu select Temp display unit and press MENU OK The Temp display unit screen displays 21 to Temp display unit 2 Press AVol or YVolto select Cor F 3 Press MENU OK to save the setting and return to the main System options Temperature Aler
3. 1 then repeats it 3 Press LULLABY SKIP to skip to Lullaby 2 The system plays Lullaby 2 then repeats it 28 4 Press LULLABY SKIP to skip to Lullaby 3 The system plays Lullaby 3 then repeats it 5 Press LULLABY SKIP to skip to Lullaby 4 The system plays Lullaby 4 then repeats it 6 Press LULLABY SKIP to skip to Lullaby 1 The system plays Lullaby 1 then cycles through all lullabies 7 Press AVol and WVol on the monitor or camera to adjust the volume Press Wvol all the way down on the monitor to mute the lullaby playing through the monitor USING THE INTERCOM The Intercom feature lets you talk to whomever is within camera range 1 Decide which camera you want to establish an intercom link with and make it the full screen live view camera 2 Press and hold TALK the monitor 3 Speak clearly into the microphone 4 Release TALK to listen to the response CAMERA PAIRING The system comes with one camera that has already been paired It will communicate with the monitor when it is powered on The pairing function lets you add up to 3 additional cameras to your system It also lets you re pair your first camera if needed Pow Ne gt Pair the cameras to the monitor before mounting the cameras Verify that the monitor is powered on see page 10 Install and power on the accessory cameras according to the procedures beginning on page 8 Pair the accessory cameras according to the procedures on page 25 Once
4. C Operating Humidity Range Within 85 RH RoHS Compliance Yes Battery Life 4 5 hours Housing Material Plastic FCC Notices FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules Operation is subjected to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Privacy of communication may not be ensured when using this device This equipment has been tested and found to comply with limits for a Class B digital device pursuant to Part 15 of the FCC rules and ETSI EN 300328 These limits are designed to provide reasonable protection against harmful interference in residential installations This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television equipment reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Move the equipment away from the monitor Plug the eq
5. Scroll down 11 MENU OK Select a menu option or accept a setting 12 TALK Activate Intercom function see page 29 13 BACK In Menus Back one level 14 CHP eIn Menus Scroll right eIn Zoom Scroll right eIn Live view Switch between available cameras 15 NIGHT LIGHT Remotely turn the camera night light ON or OFF The monitor s night light function is only available when the camera is paired to the monitor 16 LULLABY SKIP Skips to the next lullaby in the series See page 28 for details 17 Charge LED RED Charging Green Charging complete If the monitor becomes unplugged from the adapter this LED turns off 18 DC 5V Power Connects the DC 5V power adapter to the monitor LCD DISPLAY o 0000000000 000000oooo o 000 000 ooo 0000000000000000 0000000000000000 00000000000000 0000000000000 0000000000000 000000 000000 000000 o oo Item Icon What it is 1 Y Signal Indicator displays in full screen mode only The number of bars in the signal indicator shows the strength of the signal received from the camera One or no bars indicates the signal is poor and 4 bars indicate a very strong signal Signal Strength Indicator Warning Strong Paul None Good Pau None Fair P None Low P None No Signal P Out of Range It
6. the main menu selections select VOX and press MENU OK The VOX sensitivity screen displays Low 2 Press AVol or WVol to select a level High Low or Off 3 Press MENU OK to save the selection and return to the main menu selections 24 CAMERA This option allows you to pair the monitor with cameras up to 4 cameras supported or to turn on off an individual camera The cameras are still powered on but no longer visible to the monitor System Poner savel camera vox aen 1 From the main menu selections select Camera and press MENU OK 2 The Camera options screen displays Two options display Pair and On Off o par Pair Pairing allows you to introduce additional cameras to the monitor The monitor can then recognize and display video from them The camera that comes with this system is already paired Before pairing additional cameras be sure they are powered and turned on See page 10 25 1 Select Pair from the Camera options screen The camera selection screen displays r 2 Press AVol or WVol to select the camera you want to pair then press MENU OK The monitor prompts you to press PAIR on the back of the camera within 30 seconds 3 Press PAIR on the back of the camera within 30 seconds That camera s video displays on the monitor when pairing is successful Pair the cameras to the monitor before mounting them On Off This option allows you to turn individual cameras on of
7. ED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you LEGAL REMEDIES This warranty gives you specific legal rights amp you may also have other rights which vary from state to state This warranty is void outside the United States of America amp Canada PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY If after following the instructions in the owner s manual you are certain that the Product is defective pack the Product carefully preferably in its original packaging Disconnect the battery from the Product amp separately secure the battery in its own separate packaging within the shipping carton The Product should include all 34 parts amp accessories originally packaged with the Product Include evidence of original purchase amp a note describing the defect that has caused you to return it The Product should be shipped freight prepaid by traceable means to warrantor at Uniden America Service 743 Henrietta Creek Rd Roanoke TX 76262 800 297 1023 8 a m to 5 p m Central Monday through Friday 35 36
8. GUARDIAN A Uniden Portable Digital Wireless Baby Monitor UBR223 User s Guide CUSTOMER CARE At Uniden we care about you If you need assistance please do NOT return this product to your place of purchase Our customer care specialists are available to serve you Quickly find answers to your questions by 1 Reading this owner s manual 2 Visiting our customer support website at www uniden com 3 Calling our customer care specialists at 1 800 297 1023 IMPORTANT SAFETY PRECAUTIONS This manual contains important information about this product s operation If you are installing this product for others you must leave this manual or a copy with the end user When using your equipment always follow basic safety precautions to reduce the risk of fire electric shock and injury to persons including the following The camera is NOT weatherproof It is an indoor camera To avoid any risk of electric shock from lightning avoid handling any electronic devices except battery powered ones during an electrical storm Use only the power cord indicated in this manual e Never tug or pull on any power cord be sure to leave some slack in the cord when placing your equipment and always use the plug to unplug cord from the wall outlet Never leave power cords where they can become crushed cut or frayed when running power cords avoid letting them rub against any sharp edges o
9. URATION This warranty to the original user shall terminate amp be of no further effect 36 months after the date of original retail sale The warranty is invalid if the Product is A damaged or not maintained as reasonable or necessary B modified altered or used as part of any conversion kits subassemblies or any configurations not sold by Uniden C improperly installed D serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty E used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden or F installed or programmed by anyone other than as detailed by the owner s manual for this product STATEMENT OF REMEDY In the event that the product does not conform to this warranty at any time while this warranty is in effect warrantor will either at its option repair or replace the defective unit amp return it to you without charge for parts service or any other cost except shipping amp handling incurred by warrantor or its representatives in connection with the performance of this warranty Warrantor at its option may replace the unit with a new or refurbished unit THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE amp ENTIRE WARRANTY PERTAINING TO THE PRODUCT amp IS IN LIEU OF amp EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER WHETHER EXPRESS IMPLIED OR ARISING BY OPERATION OF LAW INCLUDING BUT NOT LIMIT
10. a e adjusting the monitor and camera antennas to vertical position The monitor picture has frozen There is an irregular beeping coming from the monitor Use a blunt object like an unbent paper clip to press RESET and reset the monitor The monitor turns off Press POWER to turn it back on again That is the Alert tone Go to the Alert screen to turn the alert volume down or off see page 23 31 SPECIFICATIONS GENERAL Camera Monitor Operating Frequency Range 2 400 2 4835GHz TX Power 15dBm NA RX Sensitivity NA 81dBm Type of Spread Spectrum Used FHSS Type of Modulation Used GFSK Communication Range 500ft Line of Sight CAMERA Image Sensor Type Manufacturer Model 1 6 5 Color CMOS Image sensor Effective Pixel 640 x 480 Image Processing MJPEG Lens 3 0mm F2 8 Exposure Auto White Balance Auto Power Requirement 5 0VDC 5 Power Consumption 150mA Max IR OFF 730mA Max IR ON 440mA Max Charging Operating Temperature Range 14 F 104 F 10 C 40 C Operating Humidity Range Within 80 RH RoHS Compliance Yes Housing Material Plastic 32 MONITOR Display Size Type 2 3 TFT LCD Resolution 320 x 240 Power Requirement 5 0VDC 5 Power Consumption 260mA Max Normal 740mA Max Charging Operating Temperature Range 14 F 104 F 10 C 40
11. arging LED turns on If the battery is not fully charged the LED is red If it is fully charged the LED is green Press Power The green power LED turns on and the monitor now displays camera video If it doesn t try reconnecting the AC adapter making sure the power outlet isn t controlled by a wall switch BASIC OPERATION WIRELESS CAMERA Left side Front Right side NOTE The RESET button is on the back Item What it is 1 Camera Antenna Sends and receives signals to or from the monitor 2 Temperature sensor Detects temperature at camera side and displays it on the monitor LCD PAIR Pairs the camera to the monitor Mounting Clip This fastener can attach the camera to shelves or ledges Suction base Attach to mount the camera on glass or metallic surfaces A Vol Increase speaker volume Y Vol Decrease speaker volume LULLABY PLAY STOP Press this button to play lullabies See page 28 for details OO CO N OD on AJ LULLABY SKIP Press to play next lullaby See page 28 for details LED night light bars _ O IR LEDs Covered Infrared LEDs provide viewing in no low light conditions Item What it is 12 Light sensor Measures light intensity on the camera side 13 Lens Camera lens 14 Microphone Receives sounds for the area near the camera and transmit
12. ecording legal requirements please consult your local state and federal law enforcement agency 2013 All rights allowed by law are hereby reserved OVERVIEW FEATURES Digital wireless technology provides excellent image quality and clarity Interference free secure and private signal Up to 500 ft transmission range Maximum open space transmission range The actual range varies depending on building materials and other obstructions in wireless signal path Exceptional sound clarity Out of range notification Four lullaby selections Monitor Camera controlled night light System expandable up to 4 cameras one camera included additional cameras sold separately Two way audio communication Camera room temperature display on monitor temperature range alert Camera VGA resolution camera Built in microphone Night light control Lullaby control Built in battery for true portable wireless operation Night vision allows for low light viewing up to 15 feet 4 5 meters IR illumination range of 15ft 4 5m under ideal conditions Objects at or beyond this range may be partially or completely obscured depending on the camera application Monitor 2 3 color LCD monitor with superior image quality Rechargeable lithium polymer battery for true portability Audio level indicator Intercom Room temperature display Remote night light control Remote lullaby control If any items are missing or damaged contact our Custom
13. em Icon What it is 2 CAM1 Camera Indicator indicates which camera is displaying Press CH gt or CH on the monitor to switch between available cameras It will cycle in the following order cH gt CAM1 CAM2 CAM3 CAM4 QUAD AUTO SCAN CAM1 CH lt CAM1 Auto SCAN QUAD CAM4 CAM3 CAM2 CAM1 3 77 F Temperature indicator displays in full screen mode only Displays the temperature on the camera side 4 C Night light indicator displays in full screen mode only Displays when the ii night light is turned on See page 28 5 ES Intercom Talk Displays in full screen mode only when you press and hold TALK on the monitor see page 29 6 I Battery level Indicates the amount of power left in the battery The 44m icon displays when the battery is charging 7 iq T Volume indicator Displays when AVol or W Vol is pressed on the monitor If the volume is muted Q displays 8 D Lullaby Displays in full screen mode only when a lullaby is playing The 1 number indicates which melody is playing see page 28 9 Date and Time displays in full screen mode only Displays the time as set through the monitor 01 02 2013 12 26 00 month day year hour minute second 10 2 ZOOM indicator If you press ZOOM X2 displays after the Lullaby indicator item X 8 The zoomed image displays as the background image USING THE UBR223 Viewing Modes Live view displays live images from the cameras in the following modes 16
14. enus Use the navigating buttons to navigate up A Vol down WVol left CH and right CH in the menus then press MENU OK to confirm a setting Use CH or CH to focus on the 5 different system menu selections on the clothesline System Power Save Camera VOX Alert SYSTEM Bey ya th mm VS g Pte see ee 4 Es gt SS Move the focus to the System option and press MENU OK to access the six System options Date Time Brightness Factory Reset e Language Temp display unit Temp alert range Date Time This option allows you to set the system date and time The display format is Month Day Year Hour Minute Default 01 02 2013 12 26 1 From the System menu select Date Time and press MENU OK The Date Time screen displays Os Date Time a MONTH DAY YEAR HOUR MINUTE foc v Press A Vol or WVol to increase decrease the number for that setting 3 Press CH or CH to save the current setting and move to the next setting Press MENU OK to save the completed date and time setting and return to the main System options Press the BACK button to step backwards one level until you are out of the menu system Brightness This option allows you to adjust the brightness level for each camera Default 3 1 From the System menu select Brightness and press MENU OK The Brightness screen displays 2 Press CH or CH to increase or decrease the brightness level 6 levels
15. er Care Line immediately Never use damaged products USING THE MANUAL This manual is set up in eight sections Overview This general section lists the system s features It also tells you how to use this manual Getting Started This section lists the hardware you should have in your box and how to set it up Basic Operations This section describes your equipment s function keys in detail It also provides a list of basic operations in an abbreviated format referencing screen details in the next section Uniden UBR223 Screen Descriptions Here you will find detailed descriptions of each screen and how it is used Special Features This section tells you about the UBR223 special features Maintaining Your System This section provides tips on how to keep your UBR223 hardware clean and in excellent working condition Solving Problems Troubleshooting tips are located here Specification This last section contains hardware and software specifications GETTING STARTED WHAT S INCLUDED The system comes with the following components Uniden Digital Wireless Monitor 1 Digital Wireless Camera 1 Suction Cup Adapter Bar 1 AC Power Adapter 2 Screws and Anchors Owner s Manual If any items are missing or damaged contact our Customer Care Line immediately Never use damaged products MONITOR INSTALLATION 1 Place the monitor in a location with clear receptio
16. f so their video is not visible through the monitor Default Camera 1 On Cameras 2 4 Off 1 Select On Off from the Camera options screen The On Off screen displays E mmm gt lt a gt TE mm gt EE lt az gt 2 Press AVol or WVol to select a camera 3 Press CH gt or CH lt to toggle between On and Off for that camera Either button will work 26 4 Press AVol or WVol to select another camera 5 Press MENU OK to accept that setting and return to the Camera options screen POWER SAVE Activating the Power Save feature turns off the LCD after two minutes of inactivity This option allows you to enable or disable this function Default Off Voice Activation VOX will turn the LCD back on Be sure that VOX is activated however see page 24 If VOX is deactivated press any button on the monitor to turn the LCD back on Even with the LCD off the LED light bar is still active 1 From the main menu selections select Power Save and press MENU OK The Power Save screen displays l Ee A Turn Off LCD After 2 minutes of inactivity Ss 2 Press AVolor WVol to toggle between turning the Power Save feature on or off 3 Press MENU OK to accept that setting and return to the main menu selections 27 SPECIAL FEATURES ZOOM ZOOM displays the camera image in double size Press AVol YVol CH or CH to see the parts of the image not displayed on the LCD screen Press ZOOM again to return to no
17. n from your camera s Place it a minimum of 3 feet from the crib 2 Plug the AC adapter power plug into the monitor s DC adapter input jack 8 3 Plug the power plug into a 120 volt AC standard indoor power outlet or surge protector 4 Press and hold POWER to turn the unit on or off Let the monitor charge for 6 hours prior to first time use so the built in rechargeable monitor battery is fully charged DO NOT remove the power cable from the monitor during the initial charge process After the initial charge recharge the monitor as needed 5 Out of range displays until you turn on the camera CAMERA INSTALLATION The UBR223 camera and mounting clip are a complete unit The UBR223 does come with a separate suction cup bar With it installed you can mount the camera on glass or smooth metallic surfaces Placement Considerations The camera included with your monitor is NOT weatherproof it is an indoor camera The clearest line of sight between the camera and monitor is best Walls especially brick and concrete can affect reception quality Avoid having a direct light source in view of the camera ceiling or floor lamps Carefully plan where and how the camera will be positioned and where you will route the cable that connects the camera to the power adapter Place it a minimum of 3 feet from the crib When you are positioning the camera bring the monitor along it s much easier to get the camera into the right positi
18. on when you have the display handy Check the image on the monitor before you install the camera Out of range displays when the camera is out of range turned off or unsuccessfully paired to the monitor It also displays when the monitor is out of range You can install additional cameras maximum of 4 cameras When adding cameras that were not included in the original box you will need to pair the cameras with the monitor Refer to page 29 Wall Mount The UBR223 camera mounting clip has two slots that fit over screws to mount the unit on the wall 4 Suction Mount 1 Insert the suction base into the mounting clip as shown 2 Firmly press the camera with the suction base attached onto glass or metallic surfaces 3 Adjust the camera as needed Clip Mount Clip the UBR223 on ledges and shelves 1 2 3 Mark the position of the screw holes on the wall Drill holes and insert the anchors and screws provided Be sure to leave room for the mounting to fit over the screw heads Place the mounting over the installed screws and push it K WALL downwards locking it into place asi sa Adjust the camera as needed Press the mounting clip as shown Place the unit over the mounting surface and release Adjust the camera as needed Connect Power Insert the AC adapter power plug into the camera s DC adapter input jack Plug the other end into a 120 volt AC standard indoor power outlet or surge protector The ch
19. r lie across any high traffic areas where people might trip over them Do not use the device if the adapter cords or plugs have been damaged the monitor has been exposed to liquids or the monitor camera has been dropped or is damaged WARNING TO PARENTS AND OTHER USERS Failure to follow these warnings and the assembly instructions could result in serious injury or death This product is not designed or intended for use as a medical monitor nor should this product be used as a substitution for medical or parental supervision Always be sure that both the transmitter and receiver are working properly and are within range of each other STRANGULATION HAZARD Keep the adapter cords out of the reach of children WARNING KEEP OUT OF THE REACH OF CHILDREN This product is not a toy and is not intended for use by any children under the age of 13 If you are between the ages of 13 and 18 review these terms conditions and safety warnings with your parents or guardian to make sure that you and your parent or guardian understand these terms conditions and safety warnings Allow for proper ventilation when units are in use Do not cover the camera or receiver with any object such as a blanket Do not place it in a drawer or in any location which would muffle the sound or interfere with the normal flow of air SAVE THESE INSTRUCTIONS FOR BEST RESULTS To avoid damage to your equipment follow these simple precautions Do not drop punct
20. rmal view NIGHT LIGHT You can control the UBR223 night light using the NIGHT LIGHT button on the right side of either the monitor or the camera However if you want to control it from the monitor you must place that camera in full screen mode 1 To turn the night light on from the monitor place the night light camera in full screen mode 2 Press NIGHT LIGHT on the side of the monitor or the camera The camera s night light turns on anda night light icon displays on the monitor 3 Press NIGHT LIGHT again to turn it off LULLABIES Your system comes with four preprogrammed lullabies You can control the lullabies from either the monitor or the camera However if you want to control them from the monitor the camera you want to play them through must be in full screen mode When you press LULLABY PLAY STOP to turn on the lullaby feature Lullaby 1 begins playing It will repeat until you press LULLABY SKIP to move to the next lullaby The Lullaby feature can also play all lullabies one after the other Press LULLABY PLAY STOP to turn on the Lullaby system and begin playing Lullaby 1 Press LULLABY SKIP four 4 times after Lullaby 1 begins playing Lullaby 1 restarts and then cycles through the rest of the lullabies 1 To control the lullabies from the monitor decide which camera you want to play lullabies and make it the full screen live view camera 2 Press LULLABY PLAY STOP on the monitor or camera The system plays Lullaby
21. s sound from the camera to the monitor 15 Speaker Produces the sound transmitted from the monitor 16 POWER Turns the camera ON or OFF 17 NIGHT LIGHT Press to turn the night light ON or OFF 18 Charging LED Red Charging Green Fully charged Off Camera and power adapter are disconnected or power adapter is disconnected from power source 19 Power LED Green Camera is turned on Green Blinking Battery is low 20 DC 5V Power Connects the DC 5V power adapter to the camera WIRELESS MONITOR p aa r a NOTE The RESET button is on 10 the back behind the kickstand Item What it is 1 Monitor Antenna Sends amp receives signals to or from the camera 2 LED light bar The left LED indicates power and the remaining LEDS indicate sound 3 POWER Turns the camera on and off 4 2 3 inch LCD screen 5 AVol Increase speaker volume eIn Menus Scroll up eIn Lullaby Increase volume e In Zoom Scroll up 6 ZOOM Displays the camera image in double size see page 28 7 LULLABY PLAY STOP Press this button to remotely play lullabies See page 28 for details Item What it is 8 CH eIn Menus Scroll left eIn Zoom Scroll left eIn Live view Switch between available cameras 9 Microphone 10 VVol e Decrease speaker volume eIn Menus Scroll down eIn Lullaby decrease volume eIn Zoom
22. sssssccsssosssssssscossentonssssooers GAMERA iii asiatica al caii 33 WIRELESS CAMERA srini iintindi 12 WIRELESS MONITOR 14 SOLVING PROBLEMS sssssssessssssssrssesersssecs 34 LCD DISPLAY secara ioana ia aa ca aa 16 SPECIFICATIONS ccccccccccscccscccccsssscees 35 USING THE UBR223 csssssssscccscesecsscssscssessscesessesscessese 18 GENERAL mese n usca da Pa dea aa a da ai Viewing Modes ssssescssssscsssecceneecesseccesnsecessecccsnsccesueessnseessaee 18 CAMERA Common Operations ccssscssessesssecssesseessesseessscssecssesseessees 19 MONITOR SYSTEM MENU DESCRIPTIONG dadea 20 GY STEIN teenie DRU IERNII ma ARE IRI RO RAI RI 20 FCC Notices E TA rr a ee 36 Date Time 7 FCC Compliance Information sscsssecsseccseeeseeeess 36 Brightness 22 RF Exposure Information eessssssesssseecesseeesceseescesees 37 Factory Reset 22 5 Language 23 IC Compliance Information sssesees 37 Temperature Display Unit 23 Radio Equipment Notice wi cc csssssssssssssssssssssssssessesssssssees 37 Temperature Alert Range 124 PLEBEI tr a Anuala davai E 25 Three Year Limited Warranty 37 Uniden surveillance products are not manufactured and or sold with the intent to be used for illegal purposes Uniden expects consumer s use of these products to be in compliance with all local state and federal law For further information on video surveillance and audio r
23. t Range Your UBR223 measures the ambient room temperature where the camera is If the temperature falls outside of a preset range the system alerts you Temp alert range lets you set that range Default Low Temperature 61 F High Temperature 77 F Off 1 From the System menu select Temp alert range and press MENU OK The Temp alert range screen displays o Temp alert range i gt Low temperature F ak High temperature F i SI i 2 Press CHP orCH to select Low temperature or High temperature Press AVol or WVol to increase or decrease the temperature value After setting the temperature range press CH or CH to select the On Off row Di 22 5 Press CH or CH lt to toggle between On Enable or Off disable Either button will work 6 Press MENU OK to save the settings and return to the main System options ALERT Temperatures out of range or a camera out of range triggers alerts This option allows you to set the alert volume There are 6 levels available Default Zero Mute camera vox Alert system_JPorr sae 1 From the main menu selections select Alert and press MENU OK The Alert screen displays 2 Press CHP or CH to adjust the volume 3 Press MENU OK to save the selection and return to the main menu selections 23 VOX This option allows you to set the sound sensitivity for the camera Default High Powe sel camera vox mer sven 1 From
24. the camera has been paired it will be immediately viewable on the monitor 29 MAINTAINING YOUR SYSTEM MONITOR As you use your monitor keep the screen clean by wiping it with a microfiber cloth to remove fingerprints dust etc CAMERA When dust and grime builds up on the camera lens and glass it affects the camera s vision Use a microfiber cloth to regularly clean the camera s or when night vision video is cloudy or unclear 30 SOLVING PROBLEMS If you have problems with the system there is often a quick and simple solution Please try the following If Try There is no picture from the camera e checking all connections to the camera Make sure the adapter is plugged in e making sure that the cameras and monitor are both ON e making sure that the camera is in range of the monitor The picture is dropping e moving the camera closer to the monitor repositioning the camera monitor or both to improve the reception e adjusting the monitor and camera antennas to vertical position There are audio problems e making sure that there is sound within range of the camera microphone moving the camera or monitor farther apart if the unit emits a loud screeching noise feedback The picture has become choppy The picture may become choppy when experiencing a lower frame rate Try e moving the camera closer to the monitor e removing obstructions between the monitor and camer
25. uipment into an outlet on a circuit different from that to which the monitor is connected Consult the dealer or an experienced radio television technician for additional suggestions CAUTION Any changes or modifications to this equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment 33 RF Exposure Information The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm 7 9 from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter IC Compliance Information Radio Equipment Notice The term IC before the radio certification number only signifies that Industry Canada technical specifications were met Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Privacy of communications may not be ensured when using this device Three Year Limited Warranty Important Evidence of original purchase is required for warranty service WARRANTOR UNIDEN AMERICA CORPORATION Uniden ELEMENTS OF WARRANTY Uniden warrants for three years to the original retail owner this Uniden Product to be free from defects in materials amp craftsmanship with only the limitations or exclusions set out below WARRANTY D
26. ure or disassemble any part of the equipment There are no user serviceable parts inside Do not expose the equipment to high temperatures and avoid leaving the equipment in direct sunlight for more than a few minutes Heat can damage the case or electrical parts Do not place heavy items on top of the equipment or expose the equipment to heavy pressure Remove the power adapter during long periods between usages Clean only with a dry cloth Failure to follow the instructions in this operating manual will void the warranty Uniden assumes no liability for damages to property or injury to persons caused by improper handling or failure to comply with these safety instructions CONTENTS OVERVIEW cccccssssssssscvscsscescsscsscssssscssssscsees 5 VOX iiaiiaaaeaiue 26 FEATURES Camera MONITO is cic cucoana odaia laudat ia ds etil USING THE MANUAL cessssesssecceseessssessssessnseesseeessesense GETTING STARTED ccccscccsssssccsoccsssssscecee WHAT S INCLUDED MONITOR INSTALLATION CAMERA INSTALLATION csssssscsssseccecssscsncsncensessesses Placement Considerations ee 9 USING THE INTERCOM aere 32 Wall Mount seesscsssecssseeeeeee 10 e uetisn Mat O CAMERA PAIRING 3 senioare sa a cleans 32 Clip Mount 210 Connect Power ciinii aie idea 10 MAINTAINING YOUR SYSTEM a crai da ia 33 MONITOR senin inaintat aia n vint 33 BASIC OPERATION v
Download Pdf Manuals
Related Search