VIZIO E320-A1 32" HD-ready Black LED TV
Contents
1. 1 26 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight the Settings icon and press OK The Settings menu is displayed Highlight Input Source and press OK The Input Source menu is displayed Highlight the input source you want to display and press OK Setting the Tuner Mode Scanning for Channels If you are using a device that is connected to the RF input such Before the TV can detect and display channels and their as an external antenna or cable TV connection you must set the associated information you must scan for channels A channel tuner mode scan may also be necessary when the TV has been moved to an area where different free to air broadcast television channels are 1 Press the MENU button on the remote The on screen menu is displayed available oo 1 From the Tuner Settings menu 2 Use the Arrow buttons on the remote to highlight the highlight Auto Channel Scan VIZIO Settings icon and press OK The Settings menu is displayed The auto channel scan begins a 3 Highlight Tuner and press OK The Tuner Mode menu is 2 Wait until the channel scan is Al Channel sec displayed 100 complete Highlight Done EEE an 4 Highlight Antenna or Cable and press OK and press OK Analog 19 18 Complete OO 5 Press the EXIT button on the remote 3 PAIP RUG ON tE a OM Adding New Channels Occasionally you may need to add a new analog channel or a2. VOLUME UP DOWN Increase or decrease volumne level SIDE PANEL REMOTE SENSOR amp POWER INDICATOR When using the remote aim it directly at this sensor FRONT PANEL REMOTE CONTROL INPUT Change the currently displayed input EXIT Close the on screen menu OK Select the highlighted menu option BACK Go to the previous on screen menu VOLUME UP DOWN Increase or decrease loudness of the audio MUTE Turn the audio off or on NUMBER PAD Manually enter a channel WIDE Switch the display mode POWER Turn TV on or off MENU Display the on screen menu ARROW Navigate the on screen menu GUID Display the info window V BUTTON Open the USB media player CHANNEL UP DOWN Change the channel LAST Return to the channel last viewed DASH Use with number pad to manually enter a digital sub channel For example 18 4 or 18 5 REMOTE CONTROL Replacing the Batteries 1 Remove the battery cover 2 Insert two batteries into the remote control Make sure that the and symbols on the batteries match the and symbols inside the battery compartment 3 Replace the battery cover CONNECTING A DEVICE Your TV can be used to display output from most devices 1 Verify that your device has a video port that matches an available port on the TV HDMI Component etc Turn the TV and your device off Connect the appropriate cable not included to the TV
3. highlight your time zone and Before you begin the first time setup press OK Your TV should be installed and the power cord should be connected to an electrical outlet Your devices should be connected 5 Use the OK and Arrow Up Down Buttons on the remote to turn daylight saving time On or Off To complete the first time setup 1 Press the Power Standby button on the remote The TV powers on and the Setup App starts 6 Answer the on screen questions about your TV connection using the Arrow and OK buttons on the remote 2 Use the Up Down Arrow buttons on the remote to highlight your preferred language and press OK 7 Use the Arrow buttons to highlight Start the Channel 3 Use the OK and Arrow Up Scan and press OK Down buttons on the remote to highlight Home Mode Setup and press OK 8 When you have finished the channel scan highlight Exit to Live TV and press OK The First Time Setup is complete 15 Using the On Screen Menu 5 Your TV features an easy to use on screen menu NAVIGATING THE ON SCREEN MENU To open the on screen menu press the MENU button on the remote You can also open the on screen menu by pressing the To open the on screen menu VIA button and selecting HDTV Settings from the VIA Dock then Ppress the MENU OK button on the pressing OK remote a menu option and press the Change the input source VIZIO MENU OK button to select that Change the screen aspect option rati
4. Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Unplug the power cord before cleaning your TV When moving your TV from an area of low temperature to an area of high temper
5. Normal Rich Color Green Flesh or Green Blue Adaptive Luma Adjusts the average brightness of the picture to compensate for large areas of brightness Select Off Low Medium Strong or Extend e Film Mode Optimizes the picture for watching film Select Auto or Off e Backlight Control Select Off DCR Dynamic Contrast Ratio or OPC 21 Adjusting the Color Temperature Adjusting the color temperature will change the warmness or coolness of the white areas of the picture To adjust the color temperature 1 From the Picture Settings Menu use the Arrow buttons to VIZIO A highlight More then press OK 2 Use the Arrow buttons on Color Temperature the remote to highlight Color Color Temperature Normal Temperature then press OK Red Gain 128 displeved Temperature menu is ae Ge Blue Gai EE 128 3 Use the Arrow buttons on Se ice the remote to highlight Color a TE Temperature then use the Ren E Left Right Arrow buttons to Bve Gisa 128 change the color temperature Reset Color Temperature preset e Cool produces a blue hued picture e Computer optimizes the picture for use as a PC monitor e Normal is optimized for television viewing e Custom allows you to x O yX manually change each of the color temperature settings Red Green Blue Gain Adjusts the amount of each color in the display Red Green Blue Offset Adjusts the position of each color in the display 4 If yo
6. Ss Ff Remote Control Power Cord 3 xT4 16mm with Batteries Phillips Screws PACKAGE CONTENTS After removing the TV from the box and inspecting the package contents you can begin installing the TV Your TV can be installed in two ways On a flat surface using the included stand On a wall using a VESA standard wall mount not included INSTALLING THE TV Installing the TV Stand Your TV includes a stand designed to support the weight of the TV and keep it from falling over However the TV can still fall over if It is placed on an uneven unstable or non level surface It is Pushed pulled or otherwise improperly moved If an earthquake occurs and the TV is not properly secured TV ON STAND To install fhe base Installing the TV on a Wall To mount your TV on a wall you will need a wall mount Consult the information below to find the appropriate mount for your TV model Se Installing a TV on a wall requires lifting To prevent 7 injury or damage to the TV ask someone to help you E320 A1 Screw Size Screw Length 10mm Hole Pattern 100mm V x 100mm H Be sure the mount you choose is capable of supporting the weight of the TV After you have determined that you have the correct mount for your TV you can begin the installation To install your TV on a wall 1 Place the TV screen down on a certain flat surface To prevent scratches or damage to the screen place the TV on a soft
7. on the remote to highlight Auto Power Off and press OK The displayed Auto Power Off menu is displayed lt Sleep Timer 2 Use the Arrow buttons on the Timer G 2 Highlight Off or 10 min and press OK Press Exit remote to highlight the Sleep Auto Power Off Of Timer icon and press OK The Sleep Timer menu is displayed 3 Use the Up Down Arrow buttons on fhe remote to highlight Timer and press OK The Timers menu is displayed 4 Use the Up Down Arrow buttons on the remote to highlight the period of time after which you want the TV to turn off 30 60 90 120 or 180 minutes 5 Press OK then press EXIT ow x 19 ADJUSTING THE PICTURE SETTINGS Your TV display can be adjusted to suit your preferences and viewing conditions To adjust the picture settings Press the MENU button on the 1e highlight Picture and press OK remote The on screen menu is Zag displayed Picture Settings Use the Arrow buttons on the Picture Mode Custom remote to highlight the Picture Backlight cm 50 icon and press OK The Picture Brightness c 50 Settings menu is displayed Contrast c 50 Color Em 50 Use the Up Down Arrow ar buttons on fhe remote to Sh arpness 0 The Picture Settings menu is displayed Use the Arrow buttons on the remote to highlight Picture Mode then use the Left Right Arrow buttons to change the picture mode Standard mode sets the various picture settings to values that will produce the
8. Custom then press OK The Color Digital CC Style Caption Style Custom As Broadcast As Broadcast Digital CC Style menu appears Opacity As Broadcast BG Color As Broadcast 3 Use the Up Down Arrow BG Opacity As Broadcast buttons on the remote to Window Color As Broadcast z P 5 In highlight the setting you wish Window Opacity As Broadcast to change then use the Left Right Arrow buttons to change the setting e Caption Style Choose Auto to keep default settings or Custom to manually change each setting e Text Size Adjust the size of the text e Color Change the color of the text X ow X e Opacity Change the transparency of the text e BG Color Change the background color e BG Opacity Change the transparency of the background e Window Color Change the edge color e Window Opacity Change the edge type 4 When you are satisfied with the appearance of the closed captions press the EXIT button on the remote ACTIVATING THE SLEEP TIMER Setting the Auto Power Off Feature To help save energy your TV is set by default to turn off after 10 When activated the TV s sleep timer will turn the TV off after a set minutes if no signal is being displayed on the screen This feature period of time can be deactivated To use the sleep timer To set the Auto Power Off feature 1 Press the MENU button on the VIZIO 1 From the Sleep Timer menu use the Up Down Arrow buttons remote The on screen menu is
9. best picture in the most cases This is the recommended setting Movie mode sets the picture settings to values perfect for watching a movie in a dark room Game mode optimizes the picture settings for displaying game console output Vivid mode sets the picture settings to values that produce a brighter more vivid picture 20 Football Golf Basketball and Baseball modes optimize the picture settings for their respective sports Also try these modes for other sports Custom picture mode allows you to manually change each of the picture settings Backlight Adjusts the LED brightness to affect the overall brilliance of the picture This option is not available unless Ambient Light Sensor is set to OFF See Adjusting the Advanced Picture Settings on page 21 Brightness Adjusts the black level of the picture When this setting is too low the picture may be too dark to distinguish details When this setting is too high the picture may appear faded or washed out Contrast Adjusts the white level of the picture When this setting is too high the picture may appear dark When this setting is too low the picture may appear faded or washed out If the setting is too high or too low detail may be difficult to distinguish in dark or bright areas of the picture Color Adjusts the intensity of the picture colors Tint Adjusts the hue of the picture This setting is useful in adjusting the flesh tones in the picture If
10. flesh appears too orange reduce the level of color before adjusting tint Sharpness Adjusts the edge sharpness of picture elements It can be used to sharpen non HD high definition content however it will not produce detail that does not otherwise exist Adjusting the Advanced Picture Settings e Ambient Light Sensor The ambient light sensor detects the light levels in the room and automatically adjusts the backlight for the best picture Select Off Low Medium or 1 From the Picture Settings menu High To adjust the advanced picture settings use the Arrow buttons on the VIZIO remote to highlight More then a 4 When you have finished adjusting the Advanced Picture press OK A ee Settings press the EXIT button on the remote Noise Reduction Low 2 Use the Arrow buttons on the MPEG NR ee remote to highlight Advanced SPP rer Picture then press OK The pete Mediina Advanced Picture menu is alin Mede Na displayed Backlight Control DCR 3 Use the Arrow buttons to Ambient Light Sensor Medium highlight the setting you wish to adjust then press Left Right Arrow to change the setting Noise Reduction Diminishes artifacts in the image caused by the digitizing of image motion content Select Off Low Medium or High e MPEG NR Reduces pixellation and distortion for mpeg files Select Off Low Middle or High e Color Enhancement Reduces oversaturation of some colors and improves flesh tones Select Off
11. instructions for packing and shipping the covered Product to the VIZIO service center Limitations and Exclusions VIZIO s one year limited warranty only covers defects in materials and workmanship This warranty does not cover for example cosmetic damage normal wear and tear improper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation and set up issues or any repairs attempted by anyone A5 otherthan by aVIZIO authorized service center Products with unreadable or removed serial numbers or requiring routine maintenance are not covered This one year limited warranty does not cover Products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR O
12. it is not 7 Highlight Postal Code Enter your ZIP code using the keypad on the remote then press OK The ZIP code information is often used by VIA Apps to give you the most accurate location based information such as weather or news 8 Press the EXIT button on the remote Adjusting the CEC Settings The CEC function on your TV enables you to control HDMI connected devices with the included remote without any additional programming Not all HDMI devices support CEC See your device s user manual for details To enable disable or adjust CEC settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Settings icon and press OK The Settings menu is displayed 3 Use the Arrow buttons on the remote to highlight CEC Settings and press OK The CEC Settings menu is displayed 4 Use the Arrow and OK buttons to adjust each setting e CEC Function To use CEC you must select Enable e System Audio Control When system audio control is on you can control your device s audio using the TV s remote control e Device Discovery Use this function to determine if your device is connected and supports CEC 5 Press the EXIT button on the remote 34 Turning the Power Indicator Light On or Off The Power Indicator Light on the front of your TV is set to light up when the TV is on You can change this setting if you prefer the light to be off T
13. multi channel surround audio HDMI connected devices have the ability to automatically adjust themselves for optimal viewing e HD Video Resolutions up to 1080P e HD Audio e Digital Connection e Audio and Video Signals HDMI BEST CONNECTING AN AUDIO DEVICE Your TV can output sound to an audio device such as a receiver O Pr or sound bar 1 Verify that your device has a video port that matches an available port on the TV HDMI 3 5mm etc Home Audio Receiver 2 Turn the TV and your audio device off 3 Connect the appropriate cable not included to the TV and the device 4 Turn the TV and your device on VIZIO Sound Bar HDMI CABLE CFC 2 WAY COMMUNICATION 2 0 5 1 DIGITAL AUDIO B EST PCM DTS DOLBY DIGITAL 3 5MM or RCA CABLE ANALOG STEREO CONNECTION GOO D 2 0 CHANNEL OPTICAL SPDIF CABLE PCM STREAM Je B ETTE R DOLBY DIGITAL 5 1 CHANNEL DTS 5 1 CHANNEL CONNECTING AN AUDIO DEVICE AUDIO CABLE TYPES RCA or 3 5MM CABLE OPTICAL SPDIF CABLE HDMI CABLE AV cables or Composite cables are the Optical SPDIF cables transmit audio signals as HDMI technology transmits crystal clear traditional way of connecting your devices to pulses of light through a cable made of plastic digital multi channel surround audio through your audio device Audio signals are sent over fibers Audio signals are digitally transmitted a single HDMI
14. or touch the Power control on the side of the TV to turn it on Do not remove the USB thumb drive while the TV is on Doing so may damage the drive 38 Connected Sources Displays connected USB devices To change source highlight it and press OK Current Folder Start Fullscreen Slideshow Sort by Name View Thumbnails List View Folder Settings Back Button Highlight this button and press OK if you would like to return to the previous screen Back Button Highlight and press OK to return to left column Current Folder Displays the folder path ce Photo ed sort C Name AZ View Thumbnails File Name D 1920x1080 Resolution 1920x1080 Size 1607270KB Photo Infomation Displays name resolution and file size for currently selected photo VIZIO_2GB Photo root Wa i Hjpg Page 1 of 1 Page Information If your USB thumb drive has more fles than can be displayed on a single screen you can move between pages by highlighting this area and pressing Left Right Arrow 39 Folder Contents This area displays the contents of the currently selected folder You can browse between files using the Arrow and OK buttons on the remote PHOTO VIEWER Troubleshooting amp Technical Support A DO YOU HAVE QUESTIONS LET US HELP YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States We can help with e New Pr
15. the input source you switch from the difference may be noticable See Changing the Screen Aspect Ratio on page 17 Screen Size Viewable Area Dimensions w Stand w o Stand Weight w Stand w o Stand TV Type Refresh Rate Maximum Resolution Pixel Pitch Response Time Brightness Viewing Angle HDMI Inputs Component Video Inputs Composite Inputs RF Antenna Input USB 2 0 Ports Audio Outputs Specifications B E320 A1 32 Class 31 50 ZIBO K SS IS PIGO X UZAS 208 16 09 Ibs 15 10 Ibs LED 60 Hz 1366 x 768 510 mm x 510 mm 7 ms 300 nits 176 aD 176 0 2 1 Shared with Component RCA Analog Stereo Output Optical Digital A3 E320 A1 OSD Language English Spanish French Ambient Light Sensor Yes Remote Control Model XRTO20 CSA CSA US FCC Class B Certifications HDMI 1 4 Dolby Digital Compliance Energy Star Voltage Range 120V 60 Hz Power Consumption 42 64W Standby Power lt 1W Zero Bright Pixel Guarantee Yes 44 Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one 1 year of non commercial usage and ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period VIZIO
16. use the Arrow buttons to highlight More then press OK 2 Use the Arrow buttons on the remote to highlight Reset Picture Mode then press OK The TV displays Are you sure you want to RESET Picture Settings to the factory defaults 3 Highlight Yes and press OK 4 Press the EXIT button on the remote 23 ADJUSTING THE AUDIO SETTINGS To adjust the audio settings I Press the MENU button on the remote The on screen menu is VIZIO a displayed Audio Use the Arrow buttons on the Audio Mode Flat remote to highlight Audio and Balance 0 press OK The Audio Settings Lip Sync 0 menu is displayed TV Speakers Off Use the Arrow buttons to SRS StudioSound HD Surround SRS TruVolume On highlight the setting you wish Advanced Audio to adjust then press Left Right Arrow to change the setting e Balance Adjusts the loudness of the audio output from the left and right speakers e Lip Sync Adjusts the syn chronization between the display image and the accompanying audio track e TV Speakers Turns the built in speakers on or off e SRS StudioSound HD StudioSound HD is a feature rich surround sound solution which delivers an immersive surround sound experience from the TV s internal speakers Additionally StudioSound HD completes the entertainment experience by maintaining a steady volume while watching programming and movies providing deep rich bass and delivering crisp details and c
17. A 9 Replacing the BAN TN SS Sn au 10 Connecting Your Devices 11 Connecting A Device Le LA nes 11 Connecting a Device Audio and Video Cable Types 12 Connecting an Audio Device sursaut 13 Connecting an Audio Device Audio Cable Types s 14 Connecting an Audio Device ARC 15 Without HDMI ARG sianie nn 15 With AMIS enero i 15 Completing the First Time Setup 16 Using the On Screen Menu 17 Navigating the On Screen Menu 17 Changing the Input Source sieren 18 Changing the Screen Aspect ROMO eccrine 18 Setting Up Closed CAptionNINg 228 4 eee 19 Changing the Appearance of Digital Closed Captions 19 Activating the Sleep TWN sain ce scdeanaceveiawndennsivieixndeantaiasedeance 20 Setting the Auto Power Off Feature 20 Adjusting the Picture Settings eneen 21 Adjusting the Advanced Picture Settings 22 Adjusting the Color Temperature eeiteeeteeeeeteeees 29 Adjusting the Picture Size and Position eee 23 Resetting the Picture Settings errereen 24 Adjusting the Audio Settings eeen 25 Adjusting the Advanced Audio Settings 26 Resetting the Audio Settings 26 Changing the TY SSMOSese ns unies 27 Changing the INPUT SOUE 27 Setting the Tuner Mode 28 Scanning for CM NMN IS un ae noise 28 Adding New Channels sssccncicivascecs ctbeteasueencrasubberressestnecees 29 SkipPING CRANN S rresiaren an a 30 Changing the Audio LA
18. DMI 2 Since the 4 3 aspect ratio is not large enough to fill the 3 Use the Up Down Arrow buttons on the remote to highlight the input source and TV s screen black bars are added to the left and right of the display image press OK The Input Source e Wide stretches a 4 3 aspect ratio picture to the edges Selection menu is displayed of the screen Since the picture is being stretched the display image may appear distorted If the program 4 Use the Up Down Arrow is already formatted for widescreen viewing 1 85 1 or buttons on the remote to 2 35 1 then black bars will appear on the top and highlight the input source you bottom of the display image i a a a e Zoom expands images with black bars to fit the screen e Panoramic expands the display image to fill the screen x Ow _x__4 Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 480i 480p source e Stretch expands the display image to fill the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 720p 1080i 1080p source 17 SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include them Clo
19. IO displayed Manu Language 2 Use the Arrow buttons on the English remote to highlight the Settings French icon and press OK The Settings Spanish menu is displayed 3 Use the Arrow buttons on the remote to highlight Menu Language and press OK The Menu Language menu is displayed 4 Highlight your preferred language English French or Spanish and press OK 5 Press the EXIT button on the remote 33 Setting the Time Zone To ensure the correct time is displayed when you press the INFO button set the TV s time zone To have the TV display the correct time you must be A connected to the internet via an Ethernet cable or a wireless network 1 Press the MENU button on the remote The on screen menu is VIZIO displayed 2 Use the Arrow buttons on the neous remote to highlight the Settings sree icon and press OK The Settings HARAS menu is displayed Pacific US CAN Mountain US CAN 3 Use the Arrow buttons on the Central US CAN remote to highlight Time amp Local Settings and press OK The Time amp Local Settings menu Eastern US CAN Atlantic CAN is displayed Newfoundland CAN Indiana US 4 Highlight Time Zone and press Arizona US OK The Time Zone menu is displayed 5 Highlight your time zone and press OK 6 Highlight Daylight Savings and press OK The Daylight Savings k tw x menu is displayed Choose On Eia if daylight savings is in effect or Off if
20. NgQUAQE scce 30 Using the Parental CONS sen rien 31 Accessing the Parental Controls Menu 31 Enabling or Disabling Program Ratings 32 Locking and Unlocking Channels ass unsussunuss 32 Blocking and Unblocking Content by Rating 32 Changing the Parental Control Passcode 33 Resetting the Content LOCKS 33 Changing the Names of the Inputs sise 33 Changing the On Screen Menu Language 34 Setting the Time Zone insu x 34 Adjusting the CEC SOHINGS assises 35 Turning the Power Indicator Light On or Off 35 Using the Help M DIAS eds net 36 Displaying System INfOrMOtION ccecce 36 Resettino the TV Settings raoran E E E 37 Restoring the TV to Factory Default Settings 37 Performing a Service Check 37 Using Guided SSI aient eme nee 38 Using the Info WINdOW Re 39 Using the USB Media Player 40 Using the USB WSC PIG VST sise nn R inerte 40 Connecting a USB Thumb Drive to the TV 40 Playing USE M QICE SSnn aoaaa 40 Troubleshooting amp Technical Support 42 SD SCM COMMONS uma 45 Limited WArrAnN y i s2cideniceuicdinixintaaninentaimeniasaanecsad 47 Legal amp COmMplIAnNCe ancr 48 INSPECTING THE PACKAGE CONTENTS Before installing your new TV take a moment to inspect the package contents Use the images below to ensure nothing is missing or damaged VIZIO LED HDTV with Stand QUICK START GUIDE 2 Model 32041 Quick Start Guide 3 x M4 12mm Phillips Screws
21. THER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK WWW VIZIO COM FOR THE MOST CURRENT VERSION Personal Data lf your VIZIO product is capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARANTY SERVICE If this occurs your product will be restored to you configured as originally purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect your personal information VIZIO recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer Zero Bright Pixel Defect Guarantee This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www VIZIO com or look for the zero bright pixel guarantee on the box Legal
22. VIZIO USER MANUAL Model E320 A1 SfS StudioSound HD Sf S TruVolume SRS StudioSound HD and SRS TruVolume are trademarks of SRS Labs Inc StudioSound HD and TruVolume technologies are incorporated under license from SRS Labs Inc ENERGY STAR This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power savings will be achieved Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HOM HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Welcome THANK YOU FOR CHOOSING VIZIO And congratulations on your new VIZIO HDTV To get the most out of your new VIZIO product read these instructions before using your product and retain them for future reference Be sure to inspect the package contents to ensure there are no missing or damaged parts PRODUCT REGISTRATION To purchase or inquire about accessories and installation services for your VIZIO product visit our website at www VIZIO com or call toll free at 877 878 4946 We recommend thot you either Register your VIZIO pro
23. amp Compliance FCC Class B Radio Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Notice 1 The changes or modifications not expre
24. and the device Turn the TV and your device on Set the TV s input to match the connection you used HDMI Component etc T o il z Cable Satellite Box DVD Blu ray Player Game Console HDMI CABLE e DIGITAL e HD VIDEO 1080p BEST e HD AUDIO COMPONENT CABLE ANALOG BETTER HD VIDEO 1080P STEREO AUDIO AV CABLE ANALOG e VIDEO i GOOD e STEREO AUDIO Maximum Resolution rer Lu CONNECTING A DEVICE AUDIO AND VIDEO CABLE TYPES AV CABLE AV cables or Composite cables are the traditional way of connecting your devices to your TV Video signals are sent over the yellow connector while audio is sent over the red and white connectors e Video Resolutions up to 480i e Analog Connection e Audio and Video Signals GOOD COMPONENT CABLE Component cables are designed to carry high definition video signals along with additional audio connections Colors are delivered with color information split up three different ways over three connectors for video separated into Red Blue and Green signals and the left and right audio connectors Red and White e HD Video Resolutions up to 1080p e Analog Connection e Audio and Video Signals 00000 Pr Cr Pb Cb Y BETTER 11 HDMI CABLE HDMI is the intelligent all digital interface that delivers both dazzling quality and unmatched ease of use HDMI technology transmits crystal clear digital video along with
25. ars to the EE right of each channel you select 3 When you have selected all of the channels you wish to remove press the EXIT button on the remote 29 Using the Parental Controls To use the Digital MTS feature ty From the Tuner Settings menu highlight Digital MTS and press OK The Digital MTS menu is displayed Select your preferred language English French or Spanish Press OK Press the EXIT button on the remote VIZIO lt q Digital MTS English French Spanish 30 The TV s parental controls allow you to prevent the TV from displaying certain channels or programs without a password Accessing the Parental Controls Menu To access the Parental Controls menu 1 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight the Settings icon and press OK The TV Settings menu is displayed Use the Arrow buttons on the remote to highlight Parental Controls and press OK Enter your parental passcode If you have not set a passcode enter the default 0000 The Parental Controls menu is displayed To set a custom parental passcode see Changing the Parental Control Passcode on page 32 SA NTN Enabling or Disabling Program Ratings To manage program content according to its rating you must enable the Program Rating feature To enable or disable the Program Rating feature 1 From the Parental Controls menu hig
26. ature condensation may form in the housing Wait before turning on your TV to avoid causing fire electric shock or component damage A distance of at least three feet should be maintained between your TV and any heat source such as a radiator heater oven amplifier etc Do not install your TV close to smoke Operating your TV close to smoke or moisture may cause fire or electric shock Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of your TV and to protect it from overheating be sure these openings are not blocked or covered Do not place your TV in a bookcase or cabinet unless proper ventilation is provided Never push any object into the slots and openings on your TV cabinet Do not place any objects on the top of your TV Doing so could short circuit parts causing a fire or electric shock Never spill liquids on your TV Your TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Do not apply pressure or throw objects at your TV This may compromise the integrity of the display The manufacturer s warranty does not cover user abuse or improper installations The power cord must be replaced when using different voltage than the voltage specified For more information contact your dealer Your TV is equipped with a three p
27. cable Audio Return Channel the red and white or 3 5mm connectors between devices enabled ARC TVs allow audio to be sent over an already connected HDMI cable eliminating the need for a separate audio cable See Connecting an Audio Device ARC on page 14 e Quality Stereo Connection PCM Stream Lossless e CFC 2 way Communication 2 0 Channel Dolby Digital 5 1 Channel Auto setup Analog Connection e DTS 5 1 Channel e PCM DTS Dolby Digital Audio Signal Only e Digital Connection e 2 0 5 1 Scaleable Lossless Digital Audio Connection anudle SIREN EN e Audio and Video Signals O e 3 5mm Optical SPDIF GOOD BETTER BEST 13 CONNECTING AN AUDIO DEVICE ARC Without HDMI ARC Without an HDMI ARC setup your TV will transmit audio signal from the built in tuner and VIA apps to your home audio receiver through a seperate audio connection With HDMI ARC Built in Tuner Built in Tuner Your TV Your TV HE E RCA Audio HDMI T Your Blu Ray Player Your Blu Ray Player 14 With an HDMIARC setup the audio connection between your TV and Home Audio Receiver can be removed The HDMI cable will transmit audio signal to and from your TV with an all digital audio video connection The first time you turn on the TV the Setup App will guide you 4 Use the OK and Arrow Up through each of the steps necessary to get your TV ready for use Down buttons on the remote to
28. dd a new range of channels You can do this by using the Partial Channel Search and Add Analog Channel options To add a range of new channels T From the Tuner menu highlight Partial Channel Search The Partial Channel Search menu is displayed Highlight Scan Mode and select the type of channel you are adding Analog Digital Analog or Digital Highlight From Channel and enter the channel from which you want to begin the scan Use the Number Pad on the remote to enter the channel Highlight To Channel and enter the channel to which you want to end the scan Use the Number Pad on the remote to enter the channel Highlight Start and press OK The partial channel search begins Wait until the partial channel search is 100 complete Highlight Done and press OK Press the EXIT button on the remote 28 To add a single new analog channel Wy ee ALSS 1 From the Tuner Settings menu highlight Add Analog Channel and press OK The Add Analog Channel menu is displayed 2 Highlight Enter Channel and use the Number Pad on the remote to enter the number of the channel you are adding 3 Highlight Add Channel and press OK The TV scans for the channel 4 When the TV is done scanning for the channel press the EXIT button on the remote To quickly access the Input Source menu press the INPUT button on the remote VIZIO Add Analog Channel Enter Channel Add Channel Skipping Channe
29. duct at www VIZIO com Complete and mail the enclosed registration card Extended Warranties For peace of mind and to protect your investment beyond the standard warranty VIZIO offers on site extended warranty service plans These plans provide additional coverage during the standard warranty period TO purchase an extended warranty service plan visit www VIZIO com WHEN READING THIS MANUAL When you see this symbol please read the A accompanying important warning or notice It is intended to alert you to the presence of important operating instructions When you see this symbol please read the YS accompanying helpful tip IMPORTANT SAFETY INSTRUCTIONS Your TV is designed and manufactured to operate within defined design limits Misuse may result in electric shock or fire To prevent your TV from being damaged the following instructions should be observed for the installation use and maintenance of your TV Read the following safety instructions before operating your TV Keep these instructions in a safe place for future reference To reduce the risk of electric shock or component damage switch off the power before connecting other components to your TV Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not Use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions
30. e set correctly If you are using TV AV or Component with 480i input press the WIDE button on the remote to change the screen mode The TV has pixels dots that are always dark or always lit Your HDTV is precision manufactured using an extremely high level of technology However sometimes pixels may not display correctly These types of occurences are inherent to this type of product and do not constitute a defective product 42 see When When The image quality is not good noise or static on the screen When your TV s digital capabilities exceed a digital broadcast signal the signal is up converted improved to match your TV s display capabilities This up converting can sometimes cause irregularities in the image If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal change input source the volume changes The TV remembers the volume level on each input source If the volume level on the new input source is higher or lower than the level on the source you switch from the difference may be noticable Use the Volume Up Down buttons on the remote to adjust the volume change input source the display image changes size The TV remembers the viewing mode on each input source If the viewing mode on the new input source differs from the one on
31. h Canadian French television program broadcasts 2 For each rating type you want to block or unblock use the Up Down and Left Right Arrow buttons on the remote to highlight the rating type and press OK 3 When the rating type is blocked the Lock icon appears locked Content with this rating cannot be viewed 4 When the rating type is unblocked the Lock icon appears unlocked Content with this rating can be viewed If you want to block all unrated content highlight Block Unrated Shows and use the Arrow buttons on the remote to select On 5 When you are finished adjusting the rating level blocks press the EXIT button on the remote Changing the Parental Control Passcode Changing the Names of the Inputs If you use the parental controls you should change the passcode To make it easier to recognize the different devices attached to coe the inputs on your TV you can rename the inputs For example if to prevent children from accessing inappropriate material you have a DVD player connected to the Component input you 1 From the Parental Controls menu highlight Change PIN and can rename that input to display DVD Player press OK The Change PIN menu is displayed To change the name of an input 2 In the New Pin field use the Number Pad on the remote to 1 Press the MENU button on the enter your new 4 digit parental control passcode remote The on screen menu is VIZIO displayed La 3 In the Confirm Pin field use the N
32. hlight Rating Enable and press OK The Rating Enable menu is displayed 2 Select On or Off and press OK Locking and Unlocking Channels When a channel is locked it will be inaccessible Locking a channel is a good way to prevent children from viewing inappropriate material To lock or unlock a channel 1 From the Parental Controls menu highlight Channel Locks and press OK The Channel Locks menu is displayed 2 Highlight the channel you want to lock or unlock and press OK 3 When a channel is locked the Lock icon appears locked The channel is not accessible unless the parental passcode is entered 4 When a channel is unlocked the Lock icon appears unlocked The channel is accessible 31 Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children and at other times broadcast programs that are meant for mature audiences You may not want to block the channel completely using a channel lock but you may wish to block certain programs from being viewed My A For a list of content ratings and their definitions visit www tvguidelines org sy a 4 N To block or unblock content by its rating 1 From the Parental Controls menu highlight the content type you want to adjust and press OK USA TV USA television program broadcasts USA Movie USA movie broadcasts CAN English Canadian English television program broadcasts CAN Frenc
33. k and other hazards If repair is required contact your dealer and refer all servicing to qualified service personnel WARNING Keep your TV away from moisture Do not expose your TV to rain or moisture If water penetrates into your TV unplug the power cord and contact your dealer Continuous use in this case may result in fire or electric shock Do not use your TV if any abnormality occurs If any smoke or odor becomes apparent unplug the power cord and contact your dealer immediately Do not try to repair your TV yourself Avoid using dropped or damaged appliances If your TV is dropped and the housing is damaged the internal components may function abnormally Unplug the power cord immediately and contact your dealer for repair Continued use of yourTV may cause fire or electric shock Do not install your TV in an area with heavy dust or high humidity Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock Follow instructions for moving your TV Ensure that the power cord and any other cables are unplugged before moving your TV When unplugging your TV hold the AC DC power adapter not the cord Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock When your TV will not be used for an extended period of time unplug the power cord To reduce risk of electric shock do not touch the connector with wet hands Insert batteries in acco
34. lear intelligible dialog Select Surround or Standard Equalizer Settings Reset Audio Mode k ow X e SRS TruVolume TruVolume intelligently normalizes volume fluctuations due to television commercials or channel changes Select On or Off 24 Advanced Audio See Adjusting the Advanced Audio Settings on page 25 Equalizer Settings Adjusts the boost or attenuation of different frequencies This setting is only available when SRS StudioSurround HD is set to Standard Change the equalizer presets by selecting Jazz Classical Pop Rock or Flat To change the equalizer settings yourself highlight EQ Mode and press OK Reset Audio Mode Restores the audio settings to the factory defaults See Resetting the Audio Settings on page 25 When you have finished adjusting the audio settings press the EXIT button on the remote Resetting the Audio Settings To reset the audio settings to the factory default settings Adjusting the Advanced Audio Settings To adjust the advanced audio settings 1 From the Audio Settings Menu use the Arrow buttons to VIZIO highlight Advanced Audio then press OK The Advanced Eh RANCE TER Audio menu is displayed Digital Audio Out PCM Analog Audio Out Fixed 2 Use the Arrow buttons to highlight the setting you wish to adjust then press Left Right Arrow to change the setting e Digital Audio Out Changes the type of processing for the Optical output when connected to a h
35. ls Changing the Audio Language After a channel scan is completed you may find that some Some digital free to air and cable channels broadcast programs channels are too weak to watch comfortably There may also be in more than one language The TV s MTS Multichannel Television some channels you do not want to view You can remove these Sound feature allows you to listen to audio in your preferred channels from the TV s memory with the Skip Channel feature language Channels that have been removed with the Skip A Not all programs are broadcast in multiple languages Channel feature can still be viewed if the channel The MTS feature only works when the program being viewed is being broadcast in the language you is entered using the Number Pad If you wish to Selec completely block a channel from being viewed use the parental controls See on page 30 To use the Analog MTS feature To remove a channel 1 From the Tuner Settings menu highlight Analog MTS and VIZIO A 1 From the Tuner Settings menu press OK The Analog MTS highlight Skip Channel VIZIO a menu is displayed Analog MTS The Skip Channel menu is More displayed sip Cnemnel 2 Select Mono Stereo or EEE 0 Tesia SAP secondary audio one 2 For each channel you wish 0 1 esi i programming Press OK to remove use the Up Down 0 1 Test2 Arrow buttons on the remote 0 Tests 3 Press the EXIT button on the to highlight the channel and Op Mn remote press OK An X appe
36. m Title CC Information Channel Input Information Oliver s Holiday Surprise Ch 50 123 ACT DIV CABLE Oliver wakes up One morning only to discover that his pals are missing In this hour long holiday special Oliver goes on a journey in search of his pals Who knows what he ll encounter on the way Program Description DIGITAL EPISODE GUIDE amp INFO WINDOW 37 Using the USB Media Player 6 USING THE USB MEDIA PLAYER Playing USB Media To play USB media you must first save your music or images onto The USB Media Player allows you to connect a USB thumb drive to a USB thumb drive your TV and play music or photos Remember The USB thumb drive must be formatted as FAT32 Files on the USB thumb drive must end in a supported file extension jpg To play your USB media 1 Connect your USB thumb drive to the USB port on the side of the TV 2 Highlight the Media App and press OK The Media App launches 3 Highlight your USB device in the list and press OK 4 Highlight the type of media you wish to display Photo Press OK 5 Use the Arrow buttons to highlight the file you want to Boe OR display Press OK The file plays Connecting a USB Thumb Drive to the TV e You can display your photos in fullscreen Select the 1 Turn the TV off Connect your USB thumb drive to the USB port 7 photo press OK then highlight Fullscreen and press on the back of the TV OK 2 Press the Power Standby button on the remote
37. o Set up closed captioning cS Bz Activate the sleep timer Input Wide ee Adjust the picture settings A gt sv While navigating the on screen menu you can press Adjust the audio settings Tr D lt _ the BACK button at any time to return to the previous Sleep menu screen The EXIT button will close the on screen Access USB photo slideshow Times Picture Audio PAC Change TV settings Access the help menu Media Settings Help x Ow X 16 CHANGING THE INPUT SOURCE CHANGING THE SCREEN ASPECT RATIO External devices such as DVD players Blu Ray Players and video The TV can display images in four different modes Wide Zoom game consoles can be connected to your TV To use one of these Normal and Stretch Each mode displays the picture differently devices with your TV you must first change the input source in the on screen menu To change the screen aspect ratio To change the input device l B MENU button on the Screen Mode remote 1 Press the MENU button on the remote The on screen menu is VIZIO a 2 Use the Arrow buttons to ee displayed highlight the Wide icon Press Input Source Selection OK 2 Use the Arrow buttons on the TV remote to highlight the Settings Wy 3 Use the Arrow buttons to highlight your desired screen mode icon and press OK The TV Component and press OK Settings menu is displayed HDMI 1 e Normal preserves the content s original aspect ratio H
38. o turn the Power Indicator Light on or off 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Settings icon and press OK The Settings menu is displayed 3 Highlight Power Indicator and press OK 4 Use the Up Down Arrow buttons to select On or Off then press OK USING THE HELP MENU You can use the TV s Help menu to e Displ t inf ti isplay system information Uaa Reset the TV settings a Restore the TV to its factory lt Help default settings System Info Start Setup Wizard paan seuings Clear Memory Factory Default Start Setup Wizard 35 Displaying System Information To display a summary of the TV settings 1p Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed Highlight System Info and press OK Use the Up Down Arrow buttons to scroll through the system information When you are finished reviewing the system information press the EXIT button on the remote Resetting the TV Settings Restoring the TV to Factory Default Settings To reset the TV s picture and audio settings All of the on screen menu settings can be reset to the factory defaults 1 Press the MENU button on the remote The on screen menu is displayed A If you restore the TV to the factory default settings all 2 Use the Arrow butt
39. oduct Setup Connecting Your Devices Technical Problems e And More Phone 877 878 4946 TOLL FREE Email techsupport VIZlIO com Web www VIZIO com support Hours of operation Monday Friday 5 AM TO 9 PM PST Saturday Sunday 8 AM TO 4 PM PST eak English Se habla Espanol Nous parlons Fran ais Press the INPUT button on the remote control to select a different input source If you are using cable TV satellite or antenna connected directly to the TV scan for channels See Scanning for Channels on page 27 There is no power Ensure the TV is plugged into a working electrical outlet Ensure the power cable is securely attached to the TV Press the Power Standby button on the remote or on the side of the TV to turn the TV on The power is on but there is no image on the screen Ensure all cables are securely attached to the TV Ensure all devices are connected correctly Devices differ see your device s user manual for details Adjust Brightness Contrast or Backlight See Adjusting the Advanced Picture Settings on page 21 Press the INPUT button on the remote to select a different input source 41 The TV displays No Signal There is no sound Press Volume Up on the remote control Press the MUTE button on the remote to ensure mute is off Check the audio settings See on page 24 Ensure the speakers are set to On Ensure no headphones are connected to the TV Check the a
40. ome theater audio system Select Off Dolby Digital or PCM e Analog Audio Out Sets the volume control properties for the analog RCA red white connectors when S N7 A connected to a home theater audio system Select Variable to control the external speakers volume from the TV s volume controls or select Fixed to control the external speakers volume from your home theater system controls 3 When you have finished adjusting the advanced audio settings press the EXIT button on the remote 25 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight the Audio icon and press OK The Audio Settings menu is displayed Use the Arrow buttons to highlight Reset Audio Mode and press OK The TV displays Are you sure you want to RESET Audio Settings to the factory defaults Highlight Yes and press OK Press the EXIT button on the remote CHANGING THE TV SETTINGS Using the settings menu you can Change the input source Adjust the Tuner settings Name the TV inputs Set up parental controls Change the on screen menu language Set the time Adjust the CEC settings Adjust the Power Light settings VIZIO lt Settings Input Source TV Tuner Name Input Parental Controls Menu Language English Time amp Local Settings CEC Settings Power Light On Changing the Input Source To change the input source from the Settings menu
41. ons on the remote to highlight the Help changes you have made to the settings will be lost icon and press OK The Help menu is displayed 3 Highlight Reset TV Settings and press OK The TV displays To restore the TV to its factory default settings Are YOU sure you would like to Restore Defaults This will 1 Press the MENU button on the remote The on screen menu is erase any custom settings displayed a ONS CMe One Die 2 Use the Arrow buttons on the remote to highlight the Help 5 Press the EXIT button on the remote icon and press OK The Help menu is displayed 3 Highlight Clear Memory Factory Default and press OK 4 Enter your parental control passcode If you have not yet set up a parental passcode enter the default 0000 The TV displays Are you sure you would like to Restore Defaults This will erase any custom settings 5 Highlight Yes and press OK The TV displays Memory is being cleared The TV will reset shortly 6 Wait for the TV to turn off The TV will turn back on shortly afterward and the Setup App will begin 36 USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote Press the INFO or GUIDE button one time to display channel and input information Press the INFO or GUIDE button two times to display the program title and closed captioning information Press the INFO or GUIDE button three times to display the program description Progra
42. rdance with instructions Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator Do not expose batteries to excessive heat such as sunshine fire or the like If any of the following occurs contact the dealer The power cord fails or frays Liquid sprays or any object drops into your TV Your TV is exposed to rain or other moisture Your TV is dropped or damaged in any way The performance of your TV changes substantially This apparatus shall not be exposed to dripping or splashing and no objects fill with liquids such as vases shall be placed on the apparatus The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna satellite dish or cable system is to be connected to the TV make sure that the antenna or cable system is elec
43. ronged grounded plug a plug with a third grounding pin This plug will fit only into a grounded power outlet This is a safety feature If your outlet does not accommodate the three pronged have an electrician install the correct outlet or use an adapter to ground your TV safely Do not defeat the safety purpose of the grounded plug When connected to a power outlet power is always flowing into your TV To totally disconnect power unplug the power cord The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un isolated dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons Do not overload power strips and extension cords Overloading can result in fire or electric shock The wall socket should be installed near your TV and easily accessible Only power of the marked voltage can be used for your TV Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms Unplug your TV during a lightning storm or when it will not be used for long period of time This will protect your TV from damage due to power surges Do not attempt to repair or service your TV yourself Opening or removing the back cover may expose you to high voltages electric shoc
44. sed captions display a transcription of a program s dialogue WZ If the program you are viewing is not being broadcast AJ with closed captions the TV will not display them To activate or deactivate closed captions 1 Press the MENU button on the VIZIO remote The on screen menu is displayed Closed Caption 2 Use the Arrow buttons on the Analog Closed Caption Off remote to do Li 2 Digital Closed Caption Off icon and press A osed Digital CC Style As Broadcaster Caption menu is displayed 3 Use the Arrow buttons on the remote to highlight the type of closed captions you wish to see e Analog Closed Caption for analog NTSC TV channels e Digital Closed Caption for digital ATSC TV channels 4 After highlighting the type of closed captions you wish to see use the Left Right Arrow buttons on the remote to select the caption channel you wish to display then press EXIT x ow x Caption channels usually display different languages A For example CC1 may display English captions and CC2 may display Spanish captions S ly NS CT 18 Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference To change the appearance of digital closed captions 1 From the Closed Caption VIZIO menu use the Arrow buttons to highlight Digital CC Style 2 Use the Left Right Arrow buttons on fhe remote fo select Text Size
45. ssly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment 46 2013 VIZIO INC ALL RIGHTS RESERVED 1301210C NC
46. surface such as carpet rug or blanket 2 Place the TV face down on a clean flat stable surface Be sure the surface is clear of debris that can scratch or damage the TV 1 Disconnect any cables connected to your TV 2 Align and insert the neck piece into the TV Using a phillips screwdriver tighten three 3 M4 12mm phillips screws into the back of the TV Holes indicated by arrows 3 Remove the base by loosening and removing the screws 3 Align the base with the TV and tighten the three 3 T4 16mm 4 Attach your TV and wall mount to the wall carefully following phillips screws into the base with a phillips screwdriver the instructions that came with your mount 4 Pl the TV table level surf PR ne ane Use only with a UL listed wall mount bracket rated for the weight load of this TV See Appendix A Specifications for the weight of this TV USB Connect USB thumb drive to play photo music or video HDMI Connect HDMI device Stereo Audio Out Connect RCA audio device such as sound bor ati a Optical Audio Out Connect optical SPDIF audio device such 1 ARC MPOSITI See E CABLE ANTENNA Coaxial Connect coaxial cable from cable satellite or antenna Component Composite Connect component or composite device HDMI Connect HDMI device REAR PANEL POWER Turn TV off or on INPUT Change input source MENU Open the on screen menu CHANNEL UP DOWN Change the channel
47. trically grounded to provide some protection against voltage surges and static charges Article 810 of the National Electrical Code ANSI NFPSA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of the grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements of the grounding electrode Ground Clamp Electric Service Equipment Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time unplug the TV from the wall outlet and disconnect the antenna or cable system Power Lines Do not locate the antenna near overhead light or power circuits or where it could fall into such power lines or circuits Remember the screen of the coaxial cable is intended to be connected to earth in the building installation Antenna Lead In Wire Antenna Discharge Unit NEC Section 810 20 Grounding Conductors NEC Section 810 21 Ground Clamps eee Power Service Grounding Electrode System NEC ART 250 part H Table of Contents Installing TACT PP 3 Inspecting the Package Contents 3 SAONE TM ns en ii re 3 Installing the TV SIGN de 3 lAstaling the TV on a Wal ernis 5 Controls and COMMNECTIONS es en 6 Front PAM RS AR ts 8 Remote COMORES R te
48. u want to reset the color temperatures to the factory default settings highlight Reset Color Temperature and press OK 5 When you have finished adjusting the color temperature press the EXIT button on the remote 22 Adjusting the Picture Size and Position When displaying an image from the HDMI input the size and position of the display image can be adjusted To adjust the picture size and position 1 Ensure the input is set to ATV HDMI VIZIO 2 From the Picture Settings menu use the Arrow buttons on the Size amp Position remote to highlight More then Horiz Position press OK Vertical Position Horizontal Size 3 Use the Arrow buttons on the remote to highlight Size amp Position then press OK The Size amp Position menu is displayed Vertical Size 4 Use the Arrow buttons to highlight the setting you wish to adjust then press Left Right Arrow to change the setting e Horiz Position Adjusts the horizontal left right position of the display image e Vertical Position Adjusts Ow x the vertical up down position of the display image e Horizontal Size Adjusts the width of the display image e Vertical Size Adjusts the toheight of the display image 5 When you have finished adjusting the color temperature press the EXIT button on the remote Resetting the Picture Settings To reset the picture settings to the factory default settings 1 From the Picture Settings menu
49. udio connections of external devices Blu ray player game console cable satellite box that are connected to the TV If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The colors on the TV don t look right Adust the Color and Tint settings in the Picture menu See on page 20 Reset the picture settings See on page 23 Check all cables to ensure they are securely attached The buttons on the remote aren t working Ensure you are only pressing one button at a time Point the remote directly at the TV when pressing a button Replace the remote batteries with new ones See Replacing the Batteries on page 9 For the best image quality view high definition programs using digital sources Connect your devices with HDMI cables If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The picture is distorted Nearby electrical devices may be interfering with the TV Separate the TV from electrical appliances cars or flourescent lights Ensure all cables are securely attached The display image does not cover the entire screen If you are in RGB mode computer ensure that H Size and V Position in the on screen menu ar
50. umber Pad on the remote gt ise the Arrow butions on the Neme lnpui to re enter your new 4 digit parental control passcode remote to highlight the Settings E TV icon and press K The Settings Input Labels Custom 4 Write down your new parental control passcode and save it menu is displayed in a secure location ed 3 Use the Arrow buttons on the 5 Press the EXIT button on the remote remote to highlight Name Input and press OK The Name Resetting the Content Locks ROUE menui displayed i 4 Highlight Input Source and To reset the content locks to the factory default settings Dress DK Highlight the input 1 From the Parental Controls menu highlight RESET LOCKS and you want to rename and press press OK The TV displays Are you sure you want to RESET ALL OK LOCKS SETTINGS to the factory defaults 5 If you would like to use a preset ne input label highlight Input 2 Highlight Yes and press OK Labels and press OK Highlight the input label you want to use and press OK If you would like to name the Ow X input yourself highlight the field below Input Labels and enter your custom label using fhe Re keyboard and press 6 When you have finished naming your input press the EXIT button on the remote 32 Changing the On Screen Menu Language Your TV can display the on screen menu in different languages To change the on screen menu language 1 Press the MENU button on the remote The on screen menu is VIZ
51. will either repair or replace the Product at its sole option and discretion To obtain warranty service contact VIZIO Technical Support via e mail TechSupport VIZIO com or via phone at 877 MY VIZIO 877 698 4946 from 6 00AM to 9 00PM Monday through Friday and 8 00AM to 4 00PM Saturday and Sunday Pacific Time or visit www VIZIO com PRE AUTHOR IZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and Products may be new or recertified at VIZIO s option and sole discretion Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is greater Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer PRE AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE Product returns to VIZIO s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Technical Support will provide
Download Pdf Manuals
Related Search