Foxconn AT-7300 barebone
Contents
1. User Password Status Not Installed es A Z 3 11 special keys Change User Password 4 key pad 0 9 support and 5 special keys Security option Setup ME Flash Write Protect Enabled tre Move Enter Select Change Opt ESCANEO General Help Previous Values Optimized Defaults NI Setup Load User defined Defaults Save as User defined Version 2 15 1231 Copyright C 2012 American Megatrends Inc Change Supervisor Password This item is used to install or change supervisor password Change User Password This item is used to install or change user password Only when there exists an Administrator password then this setting can be activated gt Security option To protect the BIOS from being changed by the unauthorized users there is a security option provided for your choice Only when there exists an Administrator password then this setting can be activated setup A password will be required to enter the BIOS Only check password when enter setup Always A password will be required to enter both the system and BIOS Always check password gt ME Flash Write Protect To protect the ME BIOS there is a ME BIOS write protection mechanism provided to prevent BIOS FLASH tool being improperly used to update ME BIOS ENANA Ea CRIL LLIA AL ASL VLILI A LULA LLI AAAS LA LALA SIS SS ASSIS ASS ATA SDD BIOS SETUP ss A eee aa mae tl BootOptions Aptio Setup Utility Copyright C 2012 Ame2. Load User defined Defaults Save as User defined Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt Azalia This item is used to control the detection of Azalia device gt CIR Controller This item is used to enable or disable the CIR controller EO ONU ESPESAS SERGE ELESE ESEE REELE EEEE EELEE EEEE SSS ASS ATS LSS UNA rr PA BIOS SETUP SATA Configuration Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced MANCO A Enable or disable SATA Device SATA Mode Selection AHCI Port 0 Enabled Port 1 Enabled Intel R Rapid Start Technology Intel R Rapid Start Technology Disabled tire Move Enter Select Change Opt ESC EXIT General Help Previous Values Optimized Defaults Save 4 Exit Setup Load User defined Defaults Save as User defined Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt SATA Controller s Disabled Disable SATA Controller Enabled Enable SATA Controller SATA Mode Selection This item is used to set the operation mode of your SATA ports IDE This configures the SATA ports to support IDE mode AHCI The Advanced Host Controller Interface AHCI specification describes the register level interface for a Host Controller for Serial ATA The specification includes a description of the hardware software interface between system software and the host controller hardware AHCI provides more advanced features
3. RR nn SR 10 BIOS Setup Enter BIOS Setupes O asa 12 CLF Ts ee A IA 13 Advanced MM aC REE CaN OP JE EL Lee Rd Ere ee ge oe Pee See Onn PeEE EEE 14 Miscellaneous sean rece A 15 Iegrated Pernphefals eran o ceo ados 16 SATA A raras co nano ess ecos forr sy ee nana Reser eee hy eee PRADO anata ce 17 Ra We DO NOT guarantee it is in compliance with the Safety Certificates if you add on an BOWED a 19 extension cable to NanoPC USB Flash Disk in the package ETA MA Security aa ee RR RM o eee Per eee eee ee oe eee RR 20 ESCO TRIO INS eee oe o a 21 SIVE EXI Iie o ot UE DET E src oo te ra ee Me a TET NS RR oat oe eae Mer EE 23 el lo AS cm A O A S E UR MTT Va 26 Ae DIST a A 30 Fe VIN AS y PO ere en as etme ome See ae E tee Stee ey eae ea 32 EO Cal LE DGG o ALR a A etna nen 32 2 PADUS Il Paes rn eer ee on ee e Eee eer ret generar RE RR nmr enter err tenet 34 gt cocos INTRODUCTION ANNO ENE uE IC Es INTRODUCTION 1 1 Front Side View 1 O 2 3 SSe lt Z gt 3 0 4 Remie 5 A 6 M 7 E A Y ENANA Power button with Power indicator LED Press to turn your NanoPC on or off the LED can indicate your system states Speaker USB 3 0 port This USB port supports the USB 3 0 2 0 1 0 specification Use this port for USB devices such as keyboard mouse USB printer USB flash drives and hard disk drives etc As to Windows 7 system you need to install the USB 3 0 driver in NanoPC USB Disk before using it Multi
4. USB 3 0 ports Connect network cable Connect one end of a network cable to the RJ 45 LAN port and the other end to a hub or switch Connect power cord Connect the power adapter to the power input port of the NanoPC and then press the power button to start it 4 we M SO MM f 4 o B O S S ET U P ae ANAAANANANANANAAAANAANANANANANANA NANNAN ANNANN NANNAN ON 3 a Enter BIOS Setup The BIOS is the communication bridge between hardware and software correctly setting up the BIOS pa rameters is critical to maintain optimal system performance Power on the computer when the message Press lt Del gt to enter setup Press lt F11 gt to enter boot menu appears at the bottom of the screen you can press lt Del gt key to enter Setup BE We do not suggest that you change the default values in the BIOS Setup and we shall not be responsible for any damage which resulted from the change you made Use the arrow right left keys to select a specific function and go to the submenu Each function is ex plained below Main It displays the basic system configuration such as CPU Name memory size system date time and so on They all can be viewed or set up through this menu Advanced The advanced system features can be set up through this menu Power All the items related with Green function featu
5. for satisfying RF exposure compliance ER MA ESSE E eee EEE Warning statement for Europe Also put in the manual which directive to fulfil and also which countries to sell the product Example of a text to tell which directive has been fulfilled Hereby Foxconn declares that this AT 7000 Series is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC a
6. Function card reader This memory card reader supports SD SDHC SDXC MS MS Pro MMC memory cards used in devices like digital cameras mobile phones Media players and so on Microphone SPDIF in port Connects to a microphone or playback devices with optical connectors 3 5mm jack SPDIF function requires additional adapter and adapter cable Headphone Connects to a headphone Kensington lock Attach a Kensington security system or a compatible security lock to secure your NanoPC in place A 7 A INTRODUCTION E WY a E a ESA 1 2 Back Side View E E E ILL IL IA ALLI LIA ALLA LIA AAA LILA ALLI LIA ALLA LILA LALA II A INTRODUCTION INTRODUCTION 1 SSeZ gt 3 0 DVI HDMI tg DCIN USB 2 0 port This USB port supports the USB 2 0 1 0 specification Use this port for USB devices such as keyboard mouse USB printer USB flash drives and hard disk drives etc USB 3 0 port This USB port supports the USB 3 0 2 0 1 0 specification Use this port for USB devices such as keyboard mouse USB printer USB flash drives and hard disk drives etc As to Windows 7 system you need to install the USB 3 0 driver in NanoPC USB Disk before using it DVI port Connect monitor or TV that uses DVI connector to this port By using the DVI to VGA adapter that comes with your product you can also connect a VGA compatible devices such as a monitor or projector HDMI port The HDMI High Definition Multimedia Interface port suppo
7. General Help Previous Values Optimized Defaults Save amp Exit Setup Load User defined Defaults Save as User defined Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt Miscellaneous Integrated Periperals SATA configuration Press lt Enter gt to go to relative submenu CES Bea DORSO SSD SAAS SSAA SLITS SSA SSA SSS ASS ASS SSS BIOS SETUP A A AAA AN Miscellaneous Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced MITE AA IE NN EA Select the keyboard NumLock state te Move Enter Select Change Opt ES GAME General Help Previous Values Optimized Defaults Save amp Exit Setup Load User defined Defaults Save as User defined Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt Bootup Num Lock This item defines if the keyboard Num Lock key is active when your system is started The available settings are On and Off default S S EIA BIOS SETUP E WAAL Integrated Peripherals Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced MITE A DAI NN DEA PCH Azalia Configuration Control Detection of the Azalia device Disabled Azalia will be CIR Controller Configuration unconditionally disabled CIR Controller Disabled Enabled Azalia will be unconditionally Enabled te Move Enter Select Change Opt ESCs Exaiu General Help Previous Values Optimized Defaults Save amp Exit Setup
8. NanoPC Users Manual O AAA E eee EEE Trademark All trademarks are the property of their respective owners Version User s Manual V1 0 for NanoPC Symbol description Note Refers to important information that can help you to use NanoPC better and tells you how to avoid problems Caution Indicating a potential risk of hardware damage or physical injury may exist C WEEE The use of this symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed informa tion about recycling of this product please contact your local city office your house hold waste disposal service or the shop where you purchased this product All rights reserved All trade names are registered trademarks of respective manufacturers listed All images are for reference only please refer to the physical product for specific features ANA E E E EE AAA N Safety Notice J Before using this product please read the below safety notice carefully this will help to JN extend the product s lifecycle and work normally When NanoPC is working please make sure its ventilation system is working m The power adapter is dissipating heat during normal use please be sure not to cove
9. POST messages Save Exit Enabled Displays OEM customer logo instead of POST messages gt Boot Menu This item is used to enable or disable boot menu Aptio Setup Utility per er 3 Security Save Changes and Exit and b Save Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save your changes and exit select No or lt ESC gt to return to the main menu b Discard Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to exit setup utility without saving your modifications select No or lt ESC gt to return to the menu Save Changes If you select this option and press lt Enter gt a message will be displayed in the center of the screen Select Yes to save your changes select No or lt ESC gt to return to the menu b Discard Changes If you select this option and press lt Enter gt a message will be displayed in the center of the screen Select Yes to discard your modifications select No or lt ESC gt to return to the menu gt Load Default Values i AS Optimal defaults are the best settings of this motherboard Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values Select this option and press Enter it will pop out a dialogue box to let you load the defaults Select lt Yes gt and then press lt Enter gt to load
10. copy of Windows O Where do you want to install Windows Total Size Sa Disk O Unallocated Space 160 0 GB ENANA INSTALL OS E ANNO AAA AAA AAA 9 In the hard disk size screen you can click the new button to create partitions as you need In this example we are creating a 70GB partition to install Windows Make your modifications and click Apply Where do you want to install Windows Total Size Se Disk O Unallocated Space 160 0 GB p Refresh A Delete A Format ae New Load Driver ER Extend Sze 7000 MB Apply y Collecting information 2 Installing Windows To ensure that all Windows features work correctly Windows might create additional partitions for system files So you will see a 100MB partition reserved by system after you create a partition Select the 70GB partition and click Next to continue ENANA E E E ILL LI ALLI LIA ALLI LIA ALLI LIA ALLA IIA ALLA LISA LADILLA INSTALL OS e A ANS Where do you want to install Windows Total Size SP Disk 0 Partition 1 System Reserved 100 0 MB 86 0 MB System Disk 0 Partition 2 68 3 GB 68 3GB Primary SL Disk 0 Unallocated Space 91 6 GB 91 6 GB fp Refresh A Delete P Format Load Driver a Extend 1 Collecting information 2 Installir 10 The setup program will then start to install Windows 7 8 on your hard disk During the installation your compute
11. including SATA features but some SATA drives may not support AHCI unless they are labeled with AHCI support in its specification If your motherboard supporting AHCI and you have a SATA device which also supports AHCI then i ALA BIOS SETUP ANNAN ENE EE VILA LISAS LISAS AAA SAA ASA AAA AS LASA AAA ASA AVI ISLAS S E BIOS SETUP you can select IDE option to have fair performance or you can select AHCI to get its best Power performance r rE r Aptio Setup Utility yright C 2012 American Megatrends Inc gt Port 0 Port 1 ERA NE Power Security BootOptions Save 4 Exit This item is used to enable or disable SATA port 0 1 Restore On AC Power Loss Last State Intel R Rapid Start Technology Deep Sleep Support Enabled This item is used to enable or disable the Intel R Rapid Start Technology gt Restore on AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss b Deep Sleep Support This item is used to enable or disable Deep Sleep Support function When entering deep sleep mode system S4 S5 only can wake up from power button b Lan Wakeup This item is used to enable or disable LAN wakeup function it appears only when the Deep Sleep Support is disabled BIOS SETUP E WA Security Aptio Setup Utility Copyright C 2012 American Megatrends Inc Main Advanced Power Security BootOptions Save amp Exit Administrator Password Status Installed Valid Keys
12. oceed n set to Disabled in the BIOS setup Custom advanced Install a new copy of Windows This option does n rograms The option to make changes to disks and partitions is availa en you dis art your computer using the installation disc y We recommend backing files efore you proceed 4 1 Install Windows 7 8 1 Connect the Windows 7 8 Install USB Disk or USB DVD ROM drive to one USB port of NanoPC 2 Press power on button to turn on your computer 3 Put the Windows 7 8 Install CD into the USB DVD ROM drive if you use the USB DVD ROM drive 4 Computer will choose the boot device by BIOS default and start loading the files for installing the OS Pd Please press lt Del gt key to enter BIOS Setup if you want to change the first boot device 8 The setup will display the hard disk partitions 160GB in this example of your system If there for installing the OS were other systems such as Linux installed previously you need select them and click Drive options advanced to delete them When all partitions are clean setup will display the biggest size of your 5 When the installation windows popup set the related items and click Next to continue then click hard drive Install now button to start the setup When the license terms appear choose accept and click Next to continue 7 It will then ask you to select the installation type Click Custom advanced to install a new
13. p wizard will guide you to load a local BIOS file to finish the operation You must remember from which directory to load your new BIOS file with an extension of ROM for AMI BIOS before the setup wizard starts A I E UTILITY NOOO OOOO ONO SAS LSA SSS SI SAS SS LA SSDI LS SSSA SLI ASA SSS SANA PENA AAA AA A ry sh ii o a Statement o This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Updating may cause some problems eg the computer w restarting may be failed which are not guaranteed by Foxconn s product warranty Are you sure to continue Yes No Warning FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can ROM Part radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equi
14. pment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna 2 About amp Help This page shows some information about Fox WINFLASH Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution Any changes or modifications not expressly approved by the grantee of this device could void the user s authority to operate the equipment He RA About amp Help 2 FOXCONN WINFLASH Version 1 0 0 0 PackageVersion 1 0 1 5 E Home Page http www foxconnchannel com RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the Contact Us Technical Support Team Website antenna s used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co located or operating in conjunction with any other antenna Copyright C 2011 by FoxconnTechnology Group All Rights Reserved R or transmitter End users and installers must be provide with antenna installation instructions and transmitter operating conditions
15. r Select System Memory Size 4096 MB DDR3 Change Opt ESC EXIT Wed 23 2012 Fl General Help System Time 16 06 12 F2 Previous Values F3 Optimized Defaults Access Level Administrator F4 Save amp Exit Setup F7 Load User defined Defaults F8 Save as User defined Version 2 15 1231 Copyright C 2012 American Megatrends Inc System Date lt weekday gt lt month gt lt date gt lt year gt format Day weekday from Sun to Sat this message is automatically displayed by BIOS Read Only Month month from 1 to 12 Date date from 1 to 31 Year year set up by users Use ENTER TAB or SHIFT TAB to select a field Use or to input the value b System Time This item allows you to configure the desired time Use ENTER TAB or SHIFT TAB to select a field Use or to input the value The three fields of the setting are lt hour gt lt minute gt lt second gt respectively Access Level It displays your current access level If you enter system with a user password it will display User If M M BIOS SETUP ES ANNO NS AAA AAA BBB no password is set or you enter system with administrator password this item will display Administrator Advanced Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced MITE TA AI NN DE Miscellaneous gt Integrated Periperals gt SATA configuration tre Move Enter Select Change Opt ESC EE
16. r it and keep it away from your body to prevent discomfort or injury by heat exposure m Please use the power adapter that comes with the product s package wrong power adapter may damage your device m Make sure all the peripherals are properly connected before using NanoPC E This product should only be used in an environment with ambient temperatures between 0 C and 40 C m Always shut down the computer before installing or uninstalling the peripheral which does not support hot plug m Disconnect all peripherals before servicing or disassembling this equipment m Please do not disassemble this product by yourself any disassembly not approved by the original manufacturer may result in malfunction and void warranty m Risk of explosion if battery is replaced by an incorrect type please dispose of used batteries according to the instructions y f f f A A ES NSSS SSS SS SSS SSS SSS SSS SSS BB ILL LI SALI IL IA ALLI LIA AAA LISA ALLI LIA AAA LIA LIL A EEE SE EEE Package Contents TABLE OF CONTENTS Introduction ddr rontiside view ass ssa tte as eR USE A eR Ee ad SS 2 12 Back Side View aaa E E a L 7 E E AAS 4 Placement and connecting 2A ERlacemento o Cs erence A A 7 InSealbase TR er ee nee eee eee ee erern Te T COMING a e 7 Za MN O RC a cosa rer ce RO rec en E 8 A meta nee Cem cuco tn mene ERRO RAR os er nee E A te teeta ene ne Reenter 8 ConncchuSEB o 9 Connecinetwonccable a EO 9 Connecipowercondia aa su oo
17. r will restart several times Installing Windows That s all the information we need right now Your computer will restart several times during installation of Copying Windows files Windows files 1 Installing features Installing updates Completing installation ji Collecting information 2 Installing W 11 When the installation is complete setup will prepare your computer for it s first use You can then follow the steps to select system settings create an account set a password etc until the whole process is completed 4 2 Install Drivers 1 When the Windows 7 8 is completely installed you have to install the necessary drivers before using the NanoPC Connect the NanoPC USB Flash Disk to your system 2 Waiting for a few seconds the main menu will be displayed on the screen 3 Use these options to install all the drivers for your system You must click Intel Chipset Driver to install it first After that you can click One Click Setup and then choose the items you want to install or you can click on each individual driver to install it manually 4 After installing all the drivers you need to restart your NanoPC then you can start using it UTILITY E NSSS SSS SOS Fox WINFLASH Fox WINFLASH is a useful utility to backup and update your system BIOS Supporting Operating Systems m Windows 7 32 bit 64 bit m Windows 8 32 bit 64 bit 1 Local Update 1 1 Local Update BIOS Info
18. res can be setup through this menu Security The Administrator User password can be set up through this menu to prevent unauthorized use of your computer If you set a password the system will ask you to key in correct password before boot or access to Setup BootOptions Boot features can be set up through this menu You can set the boot device priority and enable Quiet Boot feature here Save amp Exit The optimal performance settings can be loaded through this menu However it may offer better performance in some ways such as less l O cards less memory etc still it may cause problem if you have more memory or I O cards installed It means if your system loading is heavy set to optimal default may sometimes come out an unstable system What you need now is to adjust BIOS setting one by one trial and error to find out the best setting for your current system You also can save or discard the changes and exit BIOS setup here ERAN A MSI SDL PSD DA DDS DR DDD AISLES SSS SS SSSA ASS ASS TSS BIOS SETUP A O A Main Aptio Setup Utility Copyright C 2012 American Megatrends Inc Main Advanced Power Security BootOptions Save amp Exit System BIOS Set the Date Use Tab to Project Version C25F1D17 switch between Date elements Build Date 11 23 2012 EC Version LARIOS Processor Intel R Core TM 15 3317U CP Core Frequency Count Chipset Intel PCH SKU Name HM76 System Memory tie Move Memory Frequency 1333 Mhz Ente
19. rican Megatrends Inc Main Advanced Power Security BootOption Save amp Exit This option controls if CSM Launch PXE OpROM policy Do not launch will be Taunched FIXED BOOT ORDER Priorities lst Boot Device Hard Disk 2nd Boot Device CD amp DVD 3rd Boot Device Removable Device 4th Boot Device LAN Hard Disk Drive Priority Press Enter Optical Disk Drive Priority Press Enter Removable Device Priority Press Enter Network Device Priority Press Enter tie Move Enten Selec Quiet Boot Disabled Change Opt Boot Menu Enabled ESC Exit General Help Previous Values Optimized Defaults Save amp Exit Setup Load User defined Defaults Save as User defined Version 2 15 1231 Copyright C 2012 American Megatrends Inc Launch CSM This item controls if CSM will be launched WARNING This option is for advanced users gt Launch PXE OpROM policy This item controls the execution of Legacy PXE OpROM 1st 2nd 3rd 4th Boot Device These items are used to set the system boot order gt Hard Disk Drives BBS Priorities Optical Disk Drive BBS Priorities Removable Device BBS Priorities NETWORK Device BBS Priorities Press lt Enter gt to go to its submenu Use this items to specify the boot device priority sequence of the detected devices gt Quiet Boot This item is used to enable disable the quiet boot i AE BIOS SETUP ES ANNO ENE ARE CC E BIOS SETUP Disabled Displays the normal
20. rmation This page lets you know your system BIOS information TEEN werent S _ FOXCONN WINFLASH painia Update O ma e amp BIOS Info MainBoard Type Backup BIOS A Update BIOS BIOS Version y About8 Help Release Date BIOS Size Toolbar ROM Part Note BIOS Size 32Mb 32M bit 4M Byte BIOS Size 16Mb 16M bit 2M Byte Please refer to the physical motherboard for details EXA NETA Minimum Exit Show current BIOS information OASIS ESSES SSSI SASSI LASS LISS ASSL AS SLI ASA SSS SANA UNEN rs PE UTILIT 1 2 Local Update Backup BIOS This page can back up your system BIOS You can click Backup BIOS and key in a file name then click Save to finish the backup operation The extension of this backup file is ROM for AMI BIOS Make sure you can remember the file name together with the directory which it is stored prevented that you may need them to recover your BIOS later Name Date modified q Le PerfLogs 2009 7 14 11 20 Le Program Files 2009 7 14 15 46 Le Program Files x86 2012 1 7 12 25 de Users 2012 1 7 11 59 Ji Windows 2012 1 7 12 24 7 Key in a BIOS name Click to Save Save aspe 1 3 Local Update Update BIOS This page helps you to update your BIOS from a local file After click Update BIOS An alert message will be displayed to ensure if you really want to continue click Yes to confirm A setu
21. rts Full HD display devices Connect monitor or TV that uses HDMI connector to this port RJ 45 LAN port Supports 10 100 1000Mb s Ethernet network Connect network cable to access Internet Line out SPDIF out port Connects to powered analog speakers or recording devices with optical connectors 3 5mm jack SPDIF function requires additional adapter and adapter cable Power input port Connect power cord that come with your product S A A 2 1 Placement of NanoPC In Seat Base Place your NanoPC into the groove of the Seat Base De g l gt O O 2 On the desk Fit your NanoPC with Magnet Rubber Foot and put it on the tabletop directly J a ES P L A C E M E N T AN D C O N N E Cil N G AAA a E 2 2 Connection of NanoPC Connect display Connect a display or TV that has HDMI port or VGA port to your NanoPC You can connect a VGA display to the DVI port by using the DVI VGA adapter Tr iji ee 1 LR Please use the customized DVI VGA Adapter that comes with your NanoPC to get a higher resolution on your VGA display EPA EEE CC BSS PLACEMENT IND CONNECTING Connect USB devices Connect USB devices to the USB ports for example mouse keyboard devices As to Windows 7 system you need to install the USB 3 0 driver in NanoPC USB disk before using the
22. the defaults Select lt No gt and press lt Enter gt it will not load By this default BIOS have set the optimal performance parameters of system to improve the perfor mances of system components But if the optimal performance parameters to be set cannot be sup ported by your hardware devices for example too many expansion cards were installed the system might fail to work Save as User Default Values If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save the changes done so far as user defaults select No or lt ESC gt to return to the menu Load User Default Values If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to restore load the user defaults to all the setup options select No or lt ESC gt to return to the menu N STALL OS ANNAN F E ig a MAMMA LLALL LLLI LII LI LLLI LILII SILITI ILI IIL SAI SAI ALLII ES N STALL OS What kinds of hardware and software you need here _ 1 Windows 7 8 Install USB Disk USB DVD ROM drive and Windows 7 8 Install CD Other purchase 7 2 NanoPC USB Flash Disk In this package Which type of installation do you want Upgrade Upgrade to a newer version of Windows and keep your files settings and programs A J Windows 7 32 bit 64 bit and Windows 8 32 bit can t be installed when Launch CSM is MAA ing We recommend backing up your fies before you pr
Download Pdf Manuals
Related Search