Colorovo Power box 6800
Contents
1. 1LEDis on approx 25 2LEDs are on approx 50 3 LEDs are on approx 75 4 LEDs are on approx 100 PowerBox 6800 Flashlight To activate the flashlight Press and hold the power button for about 5 seconds To deactivate the flashlight Press and hold the power button for about 5 seconds Cleaning While cleaning the battery do not use aggressive cleaning agents inclu ding those containing alcohol 1 Before cleaning disconnect the battery from the power supply and other devices 2 We recommend Colorovo cleaning products Use a dry or slightly damp non abrasive and dust free cloth Follow the in structions given by the manufacturer of the cleaning agent Technical data Model CVP PB 6800 Battery type Lithium Polymer Battery parameters 6800 mAh 3 7V Charging time Approx 8 hours Buttons Switch flashlight control Ports 2x USB out 1x microUSB in Storage temperature 20 C to 65 C Operating temperature 0 C to 40 C Storage relative humidity From 20 to 93 at 40 C Operating relative humidity From 20 to 90 at 40 C Input current 5V 1A DC Output current 5V 1A DC 5V 2A DC Dimensions 65 x 105 x 22 mm Weight 1779 Warranty 12 months Certificates CE FCC RoHS2. PowerBox 6800 Portable battery Colorovo PowerBox 6800 PowerBox 6800 User guide Thank you for purchasing the Colorovo PowerBox 6800 portable battery We are confident that it will meet your expectations Please read the follo wing user guide before first use Safety information Please observe these instructions and the markings on the device The device should be operated only in accordance with its intended purpose Do not store or use the device in extremely low or high temperatures below 0 C and above 40 C Do not store or use the device in highly dusty conditions Do not store or use the device in high humidity Do not store or use the device near open flames Protect the device from direct sunlight Protect the device from contact with liquids e g water Protect the device from impacts dropping and stress Do not connect the device to power supply with wet hands This can lead to damage electric shock short circuit and fire Do not operate the device with wet hands This can lead to damage electric shock short circuit and fire Observe restrictions on the use of electronic devices Do not install the device in confined spaces e g serial installation En sure that the device is in a well ventilated space The device should be disposed of in accordance with environmental re gulations The device is a Class II double insulated product without external gro unding Faulty or damaged devic
3. es should be immediately unplugged and retur ned to service Do not repair or modify to the device nor its accessories by yourself PowerBox 6800 Descriptions of safety symbols The lightning flash inside a triangle alerts the user to the presence of dangerous uninsulated voltage inside the product which may constitute a risk of electric shock To reduce the risk of electric shock do not remove the cover back of the device because the housing does not contain user service able parts Servicing should be entrusted to qualified personnel The exclamation mark inside a triangle alerts the user to the pre sence of important operating and maintenance instructions in the documentation accompanying the product Proper disposal of this product The device cannot be disposed of together with household waste To prevent potential threats to the environment and human health due to improper disposal of waste it is mandatory to take used electronic equipment to a de signated collection point or to the place where the product was purchased for the purpose of recycling electronic waste A CE Declaration of Conformity is available at the registered office ABC Data S A 14 Daniszewska Street 03 230 Warsaw Poland This applies to countries where the use of the product is not sub ject to any restrictions Austria Belgium Denmark Finland Greece Spain the Netherlands Ireland Iceland Luxembourg Norway Portugal the United K
4. ingdom Italy and Sweden bi gt RoHS The components used in the device ensure its compliance with the requirements for reducing the use of certain substances which may adversely affect the environment in electrical and elec tronic equipment RoHS Directive 2002 95 EC Legal information Copyright 2012 ABC Data S A All rights reserved Colorovo is a registered and legally protected trademark any use of the tra demark without the consent of ABC Data S A is prohibited All registered names and trademarks mentioned on the device packaging and in the accompanying materials are used only for device identification and are the property of their respective owners The guarantor is not liable for loss of data or other damage arising in any way from the use of the PowerBox 6800 battery This user guide is not covered by the warranty and the appearance and or products may vary differ from what is described herein The guarantor re serves the right to modify the user guide at any time without prior notice PowerBox 6800 Package contents Colorovo PowerBox 6800 battery User guide Cable and connectors miniUSB microUSB 2 5x0 7 mm tablet tip Tla tka a svorky 1 Power button 2 Battery indicator 1 LED on 25 2 LED on 50 3 LED on 75 4 LED on 100 3 MicroUSB IN port for charging the Colorovo PowerBox battery 4 USB port OUT 2A used for charging devices 2A 5 USB port OUT 1A used fo
5. r charging devices 1A 6 Built in torch me colorovom PowerBox 6800 Using the battery Charging the battery 1 Insert the included cable into the microUSB IN port in the battery Con nect the other end of the cable to the USB port on your computer The battery indicator LEDs will light up sequentially 2 When fully charged the battery indicator light will go out Info Before first use three cycles of full charge and discharge are required for the battery to reach optimum performance lt takes several hours to fully charge the battery Charge the battery at least once a month to maintain its efficiency Charge the battery from a computer connected to a power supply The battery supports charging from solar batteries Disconnect the unused charger from its socket to reduce unnecessary power consumption Charging devices 1 Select an appropriate plug for the device and place it on the included USB cable 2 Insert it into one of the two USB OUT ports in the battery matching the current required for the device 1A or 2A 3 Connect the other end of the cable to the device 4 Briefly press the power button to switch on the battery and start charging Info You can use the USB cable included with the device Do not insert the plug with excessive force Battery level To check the battery level 1 Briefly press the power button All LEDs are off the battery is fully discharged
Download Pdf Manuals
Related Search