TechniSat TechniStar S2
Contents
1. 7 10 2 1 Displaying subpages If teletext subpages are available for a selected teletext page an indicator showing that subpages have already been downloaded appears on the left next to the teletext As soon as a new subpage is available this is automatically displayed gt gt gt Use the OK button to show a specific subpage The column on the left side of the screen is enabled Subpages that have already been acquired are displayed Use the up down arrow buttons to select the subpage you want You can exit the display of specific subpages by pressing OK 7 10 2 2 Stop mode gt gt Pressing the Freeze frame button displays the word Stop in the top left corner of the teletext window This prevents teletext subpages from automatically scrolling forwards Press the Freeze frame key again to switch the stop mode off again 7 10 2 3 Mixed viewing mode gt Pressing the Teletext button again enables mixed viewing mode This means that the teletext is superimposed on the TV picture 28 7 10 2 4 Exiting teletext gt Press the Back key to return to normal operating mode 7 11 Subtitles Where subtitles are broadcast this will be indicated by the El icon If you have switched on the subtitles function these will be displayed automatically provided that they are being broadcast in the language selected If subtitles are only being broadcast in other languages or via teletext you can switch thes2. 8 4 7 Ending playback gt Press the Stop button to end playback Playback will end and your receiver will return to normal mode In doing so the receiver remembers the place in the recording where playback ended If you start playing this recording again it will automatically resume at the point where you previously left off 39 9 Troubleshooting guide Remote control does not Wrong remote control code Apply correct remote work used control code Batteries are spent Replace batteries Various channels not Wrong channel list Select another channel list shown in channel list selected Programmes such as Interference from cordless Increase distance between DSF and Tele 5 have DECT telephones base station and receiver interference at certain times Sound OK no TV picture Radio mode called up and Check setting radio background image is switched off Scart plug not connected Connect Scart plug correctly properly Picture not fully visible or Picture format not correctly Check picture format distorted set Wrong picture display Check picture display zoom selected zoom in menu Check zoom setting No picture no sound No power Check power supply and display not on plug No picture via HDMI HDMI resolution used is not Modify HDMI resolution supported by TV for the correct device or connect via Scart lead No sound via HDMI picture Wrong HDMI sound format Check HDMI sound fo
3. 4 Send the faulty equipment to your Dealer i Warrantv dealer in the original packaging along with a proof of purchase copy of invoice or till receipt and all accessories Once the fault has been repaired the Service Report will be returned to you along with the repaired device with an appropriate comment from our service workshop Warrantv Special note for TV customers 5 year warranty after product registration of TechniSat digital televisions 3 year warranty 2 year warranty on parts except for the screen remote control and housing parts TechniSat Permanent added value and breathtaking technology www technisat com Warranty TechniSat Guarantee certificate Warranty Dear Customer You have purchased a high quality TechniSat product that has been put through multiple quality tests and a stringent goods outwards check at every stage Should you still encounter a problem with your equipment contrary to expectations you can always take advantage of a two year legal warranty claim This warranty claim can of course be exercised at any time without having registered the product However from the seventh month after the date of purchase under legal provision the obligation is on you to prove that the problem with the equipment already existed at the time of purchase But TechniSat is offering you another solution By submitting a fully completed and signed TechniSat registrati
4. at any time The initial installation process shown here serves merely as an example The exact process for the initial installation will depend on the settings you select Therefore please follow all instructions displayed on screen carefully 10 Menu language gt v v When the installation wizard starts you will first see a window for selecting the menu language Use the arrow keys to highlight the menu language you want The preferred audio language will be set automatically according to this selection Press the green function key Accept to confirm the selection and move on to the country selection setting Country selection Use the arrow keys to select the country in which the receiver will be operated The time zone and channel list sorting will depend on this selection Automatic setting of the local time as well as changing to summer winter time will take place based on your selection Channels will also be automatically sorted in the installation wizard according to this setting and likewise following a channel search Press the green function key Accept to confirm the selection and move on to selecting the screen format 11 Screen format gt Use the right left arrow keys to set the screen format for the connected TV G The screen format on the TV will be automatically adjusted according to your selection o Press the green function key Accept to confirm the selection
5. button The active channel list is now displayed gt You can now use the Option button to open a window containing the channel list types TV list Astra list TV provider lists TV genre lists and TV full list 22 The active channel list type is highlighted ZDF heute in europa JaaiKirss Estnischer Chi TV lists gt Use the up down arrow buttons to select e g the TV List 2 channel list type gt Confirm with OK The channels stored in TV List 2 are now displayed Montag 2245 Full list gt Use the up down arrow keys to select the Full list in the channel list types and confirm with OK An alphabetically sorted full list containing every channel is displayed Provider lists You can display the channels from specific providers using the provider lists gt Use the up down arrow buttons to select TV provider lists in channel list types 23 gt Confirm with OK Another window appears for selecting the provider you want Genre lists Using the genre lists you can view channels that have been allocated to a specific genre channel type gt Use the up down arrow buttons to select Genre lists in the channel list types gt Confirm with OK Another window appears for selecting the genre you want gt Use the up down arrow buttons to select the genre you want e g Music gt Confirm with OK Channels that correspond to the genre you selected are now displayed gt U
6. help window 2 4 Disposal advice The packaging material used for your receiver consists entirely of recyclable materials Please sort the components appropriately and dispose of them in line with your local waste disposal regulations At the end of its product life cycle this receiver may not be disposed of with your regular household waste It must be taken to a recycling collection point for electrical and electronic equipment This is indicated by the symbol on the product the operating manual or the packaging The materials used can be re used in accordance with their labelling By ensuring that valuable raw materials in old equipment are re used you can make a valuable contribution towards protecting our environment Please contact your local authority for the location of the nearest recycling point Please ensure that spent batteries from the remote control and electronic waste items are not sent to your regular household refuse site but are correctly disposed of either in special bins for problem waste or at collection points at specialist dealers 2 5 Important information on data security Before handing your receiver over to your supplier for maintenance purposes we recommend that you remove all storage media or data carriers Restoring data is not part of maintenance or repair work TechniSat accepts no responsibility for the loss of or damage to data during repair work 3 Remote control 3 1 Cha
7. is completed in full and submitted with a proof of purchase delivery note invoice till receipt etc the defective equipment in the original packaging including all accessories e g network cable remote control and a precise description of the problem The Service Report will be returned to you along with the repaired device with an appropriate comment from our service workshop By signing here you declare your consent for TechniSat Digital GmbH to use your address for its own communications by post or email and give permission to contact you Your data will not be forwarded to third parties You can rescind your consent at any time by writing to TechniSat Digital GmbH TechniPark D 54550 Daun Vulkaneifel Germany for the attention of the Data Protection Officer or by emailing data_protection technisat de The two year legal war ranty claim can only be converted into a three year warranty claim by checking the first consent box and signing this registration card Your TV bears the CE symbol and complies with all requisite EU standards Subject to change for amendments and printing errors Version 06 12 Duplication and reproduction only with the publisher s approval TechniSat and TechniStar S2 are registered trademarks of TechniSat Digital GmbH Postfach 560 D 54541 Daun Germany www technisat com Technical Hotline 49 0 3925 9220 1806 Mon Fri 8am 6pm Normal charges will apply for overseas calls 22336
8. key Skip if you have skipped the EPG update your device will automatically download the EPG data at the time set in the Programme Guide menu as long as automatic EPG updating is kept active and the device is also in standby mode at this time You can also run the update manually at any time Exiting the installation wizard Autoinstal gt Confirm the final message in the installation wizard by pressing the green function key Complete to return to normal mode 15 6 Basic operation Dear Customer The following section starts by covering basic operation as well as recurring operating steps for the TV This should make it easier to read the instruction manual since it avoids repeated description of identical steps at each individual stage If a function or setting for the device has to be different from the basic operation the difference in operation is described in detail at the relevant point in the instruction manual The so called On Screen Display is used on your TV This simplifies operation of the television since the buttons on the remote control can take on different functions which makes it possible to reduce the number of buttons In this On Screen Display OSD for short the selected functions or settings are highlighted Furthermore you will see a line at the bottom edge of the screen in which the various buttons on the remote control are shown with their current functions In this instruction manual
9. selection use the up down arrow keys to highlight the user profile you want To the right next to the profile selection you will now see the current status e g the remaining viewing time for the current day gt Confirm by pressing the OK button If the PIN request for this profile has been deactivated the TV picture now appears If it has been activated the PIN request screen now appears Device PIN 2222 gt Enter your user PIN using the numeric keys If you have entered it correctly the TV picture now appears gt If you want to change the user profile during operation you must first switch the receiver off by pressing the On Stand by button then press the button again to switch it back on calling up the user selection screen again 7 3 Switching off gt Press the On Stand by key either on the receiver panel or on the remote control to switch the receiver off again gt The receiver is now in ready mode standby This means that the time is displayed in the receiver s display panel if activated If the time is not displayed this still needs to be acquired by the receiver To do this switch the receiver on and set it to receive a local TV channel for approx 30 seconds to automatically acquire the time 7 4 Channel selection 7 4 1 Using the channel up down keys gt Use the up down arrow buttons on the receiver to select a channel or use the Channel buttons on the remote control to scroll up or down th
10. the recording medium option gt By pressing the OK a window is displayed showing the media available gt Use the up down arrow keys to either select the medium that should be permanently used as the recording medium or to highlight the Automatic entry gt Press OK to accept the selection 8 2 DVR recording G Before starting a DVR recording please define which storage medium should be used as a recording medium The following recording modes are available for DVR recording 1 Instant recording Select this type of recording to immediately record the programme currently being broadcast at the push of a button 2 Timer controlled recording This function is used to switch your digital receiver on and off to record the selected programme onto the recording medium while you are out The timer can be either manually programmed or automatically programmed via the EPG function 3 Timeshift recording Timeshift recording enables time shifted TV viewing You can start to play back a programme while it is still recording time shifting 8 2 1 Instant recording gt Switch to the channel on which the programme you want to record is being broadcast gt Press the Record button to record the current programme gt Press the Pause playback button to play back the current programme from a particular point gt To continue playing back the programme from this point press the Play Pause button again G ou are now watching t
11. 1806 normal charges will apply for overseas calls If we cannot solve the problem in this manner we would ask you to contact your dealer or supplier Please make sure you complete and send off the registration card Or you can conveniently register online at www technisat com Note on making a claim under warranty The warranty can only be invoked if 1 the fully completed registration card has been received by us no later than 4 weeks after purchase or you have registered the product online during this period 2 you have first attempted to resolve the issue by contacting your dealer or our technical hotline on 49 0 3925 9220 1806 normal charges will apply for overseas calls 3 you have filled out the Service Report in full including a precise description of the problem 4 the defective equipment is returned to the vendor including any accessories e g network cables remote control etc but not smartcards and Cl modules that are not included with delivery in the original packaging along with a proof of purchase copy of invoice or till receipt and the completed Service Report The Service Report will be returned to you along with the repaired device with an appropriate comment from our service workshop How to register your product 1 Registration by post TechniSat Teledigital GmbH cut out the completed Technisat registration TechniSat Warranty card along the dotted line place in an envelope with the a
12. 34000500
13. DVR Digital Video Recorder and a slot for USB devices You can use this as a recording medium A USB device must be inserted as a recording medium in order to record The recording capacity thus depends on the size of the recording medium and the volume of data in the programme When recording the teletext data and subtitles where broadcast are also recorded as well as the actual audio and video data 8 1 Organising recording media To be able to make recordings on one of the media mentioned above this must be formatted for either FAT32 or the TechniSat file system gt gt gt gt First press the Menu button to access the Main menu Use the up down arrow keys to highlight the Recording Media Organiser option and press OK The Recording media organiser menu is displayed and the Automatic option is highlighted nu Recording media organiser Check DVR file syste j syste Use the up down arrow keys to select the medium that needs to be formatted and press the OK button 34 Defining the recording medium In the Recording Media Organiser menu you can define which medium that has been formatted in the DVR file system format should be used as the recording medium In doing so you have a choice between selecting the medium manually or automatically By selecting Automatic the medium that was the first to be inserted is used as the recording medium gt Use the up down arrow buttons to highlight
14. TechniSat Quick start manual TechniStar S2 International Edition Digital HD Receiver with CONAX card reader an interface for recording from CI Ci modules plus DVR recording function via the USB interface i ac AB QI DOLBY Hom 2 DIGITAL _ 3 0 gt 31 M 1 Illustrations LED Display TV Radio On Standby Cl module up down arrow keys socket Card reader gt Insert the CONAX smartcard into the card reader gold chip facing down and at the front as you insert and push it in as far as it will go Inserting the Cl Cl module gt Consult the Cl Cl module and card manufacturer s instructions gt Insert the smartcard you want into the relevant Cl module gt Now carefully insert the Cl module into the slot LNB IR extension Network Audio output SCART socket input port digital TV Audio outputs USB port output analogue DC input Sound on off Numeric keys O AV Recording Multi function keys SFI EPG TV Radio mode Channel Channel Teletext On Off Freeze frame jog shuttle on off This function is only available where the corresponding data is broadcast by the channel on the selected programme slot On Standby Option in TV mode Select sound track subtitles special functions in Radio m
15. and move on to the next installation step If either Belgium Netherlands or Luxembourg has been selected in the country selection you are then taken to the programme provider selection Otherwise the installation continues with selecting the antenna signals Selecting the programme provider gt VvV VvV VV V Use the arrow buttons to highlight the Subscription option Press the OK button to open a window with the available programme providers Use the up down arrow buttons to select the programme provider you want Press the OK button to close the window again Use the arrow buttons to highlight the SD HD option Press the OK button to open a window where you can select from the HD and SD entries Use the up down arrow buttons to select the entry you want By selecting HD both HD and SD channels will be scanned and stored in future scans By selecting SD only SD channels will be scanned 12 gt Press the OK button to close the window again gt To accept the settings use the arrow keys to highlight the Accept field gt Confirming with the OK button takes you to the next step of the installation Antenna configuration In this step of the installation you can adapt your digital receiver setup to the configuration of your antenna gt If you want to adopt the default antenna settings press the green function key Accept If you do this proceed to the Channel search step gt If the configuration
16. ard is facing upwards in the direction in which the card is inserted If you now select an encrypted channel the digital receiver will automatically check the card reader and the Cl Cl slot and will display the channel in decoded form assuming a valid smartcard and an appropriate Cl CI module with a valid smartcard has been inserted 7 6 Volume control You have the option of adjusting the volume on your digital receiver This facilitates operation of the receiver as it means you can access all the major functions on a single remote control and will only rarely have to resort to using the remote control for the TV When you switch on the digital receiver sound will be reproduced at the volume level last set gt You can increase the volume for your digital receiver using the right arrow key on the receiver or the Volume button on the remote control and reduce it using the left arrow key on the receiver or the Volume button G Please note that the volume control and mute button also adjust or mute the digital audio outputs not with the bitstream setting 7 6 1 Using mute gt To switch the sound off mute press the Sound on off button press the key again to switch the sound back on G Throughout the time that the volume is switched to mute the Pa symbol appears at the upper right of the screen 7 7 Selecting a different language sound option If a programme is broadcast in multiple languages or with multiple so
17. ave three different keyboard options when using this data entry method Open the entry by pressing the OK button The virtual keyboard now appears which you can use to enter the name of the network The remote control keys and or displayed keyboard offer the following functions Arrow keys OK Back s red button S green button BD yellow button sme blue button ELA a gt Move the highlight on the keyboard The highlighted character is added behind the character highlighted in blue or the function highlighted on the keyboard is run Exits the input without making any changes Delete button deletes the character highlighted in blue Input button accepts the input made Shift key the next character is in upper case Alternative characters switches to alternative characters Caps lock key the keyboard switches between upper lower case and numbers symbols each time it is pressed Moves the blue highlight to the section already entered 20 7 Operating the unit 7 1 Switching on gt Switch the digital receiver on by pressing the On Stand by button either on the receiver panel or on the remote control G Ifthe user dependent parental control TechniFamily is activated the user selection now appears 7 2 Selecting the user If the user dependent parental control children s viewing time account is activated the user profile selection screen appears after switching on gt To make a
18. d accurately navigate to a position in the recording your receiver also has a jog shuttle function This is used as follows gt During playback press the Jog shuttle button freeze frame to access jog shuttle mode gt By pressing the right left arrow keys repeatedly if necessary you can change the speed and direction of the playback gt Press the right arrow key once to play the recording in slow motion The icone I gt is displayed gt Pressing the up arrow key or the down arrow key causes the next frame forwards or backwards to be shown 8 4 5 Setting bookmarks gt As described above skip to a location in the recording where you want to add a bookmark gt Press the Record button to place a bookmark in the current location In this way you can set bookmarks in as many places as you want in a recording Bookmarks can also be set during playback and in the Music images films organiser menu 8 4 6 Jump to bookmarks 38 During playback you have the option of navigating directly to locations in the recording where you have set bookmarks gt gt Press the Option button to open a window displaying the available bookmarks The Current bookmark is also displayed This indicates the current playback position in the recording When you use the up down arrow keys to highlight a bookmark playback starts at this point Press the OK button to close the window and return to normal playback mode
19. e on manually as follows gt Press the Option button possibly several times until a selection table containing the subtitle languages being broadcast appears in the Subtitles section gt Use the up down arrow keys to highlight the language teletext page you want gt Confirm with OK Subtitles will now be displayed G Note that this function is only available when subtitles are actually being broadcast 7 12 Picture zooming You can use this function to display 4 3 programmes on a 16 9 TV in their original format and in full screen The same also applies to 16 9 broadcasts that are not tagged as such when broadcast no 16 9 icon in the Infobox However an important pre requisite for this zoom function is that the digital receiver is set to 16 9 mode and your TV supports 16 9 signalling via a Scart socket gt Now press the Option button Sound selection now appears on the screen gt Pressing the blue function key Zoom repeatedly displays the various zoom factors gt Press the Back button to exit sound selection gt Repeat this process to switch off the zoom The zoom function remains enabled until you switch it off again or switch the receiver to standby mode 7 13 Electronic Programme Guide EPG or SFI for SiehFern Info Your digital receiver has an electronic programme guide This allows you to display channel information relating to one or more channels on your screen You can very quickly obtain an overview of t
20. e channel settings 21 7 4 2 Using the numeric pad keys gt Use the numeric keypad keys to enter the number of the channel you want For example 1 for channel 1 1 then 4 for channel 14 2 then 3 then 4 for channel 234 1 then 5 then 6 then 7 for channel 1567 When entering channel numbers with several digits you have approx three seconds after pressing a key to complete the entry If you wish to enter a number consisting of only one two or three digits you can speed up the entry procedure by keeping the key depressed a little longer on the last digit 7 4 3 Using the Navigator channel list gt Press the OK button The channel list navigator is now displayed In TV mode only TV channels are shown and in radio mode only radio channels are shown The channel currently selected is highlighted gt You can view additional data about the current programme by pressing the INFO button 7 4 3 1 Selecting a channel gt You can now use the arrow keys to highlight the channel you want Using the up down arrow keys move the cursor to a line and use the right left arrow keys to move up or down a page gt Press the OK button to select the highlighted channel 7 4 3 2 Selecting a list To make it easier for you to find channels your device provides various channel lists You can select your Favourites lists or display channels in a Full list sorted alphabetically or by provider or by genre gt Press the OK
21. ectrical equipment This is acceptable and poses no risk even if it is experienced as a slight tingling To prevent such discharge current mains operated devices receivers TVs etc must always be installed or connected with the power switched off i e all devices must be disconnected from the mains Only operate the receiver in a temperate climate To ensure adequate ventilation place the receiver on a flat horizontal surface and do not place any objects on top of it There are ventilation slots here to allow heat to be dissipated from the interior of the unit Do not place any burning objects such as lit candles on top of the receiver X Do not expose the receiver to water droplets or water spray and do not place any objects filled with liquid such as vases on top of it If water gets into the unit immediately disconnect the mains plug and inform the service department ate Do not operate any sources of heat near the TV which may also heat it up Do not obstruct the ventilation slots Do not open the receiver housing under any circumstances You risk getting an electric shock Any necessary repairs to the receiver should only be carried out by qualified service personnel In the following circumstances you should disconnect the device from the mains power and consult an expert gt the power cable or mains plug is damaged gt the device has been exposed to moisture or liquid has got into i
22. et 4 2 External unit b Use a suitable co axial cable to connect the LNB input on the digital receiver to your external unit 4 3 Connecting to a television set c Connect the receiver HDMI output and TV HDMI input using an HDMI cable If your TV is appropriately equipped it will automatically switch to the HDMI input when the digital receiver is switched on Alternatively d Connect the receiver TV SCART socket and the TV SCART socket via a SCART cable If your TV is equipped appropriately it will automatically switch to AV and hence satellite mode when the digital receiver is switched on It may be necessary to adjust the signal type on your TV 4 4 Hi fi surround amplifier To achieve the best possible sound quality you can connect your digital receiver to a hi fi surround amplifier 4 4 1 Digital e If your amplifier has an appropriate electrical or optical input connect the AUDIO OUT DIGITAL electrical socket to the electrical or optical input on your amplifier Depending on the signal provided by each broadcaster sampling rates of 32 44 1 and 48 kHz are available In addition where broadcast the Dolby Digital signal is also available on this output 4 4 2 Analogue e Use a suitable cable to connect the cinch sockets Audio R and Audio L on the digital receiver to an input on your hi fi amplifier e g CD or AUX note that the phono input is not suitable 4 5 USB port The USB port is used
23. for updating the operating software and transferring data You can also use the MPEG MP3 or JPG playback functions to access MPEG MP3 or JPG files on the USB storage device You can also insert a WLAN dongle e g the TechniSat USB WLAN Adapter part no 0000 3633 into the USB port to connect the receiver to your WLAN network 4 6 Network port RJ45 The USB port is used for updating the operating software and for viewing images playing music and films 5 Initial installation After you have read the safety instructions and attached the device you can then switch it on Switching the device on gt When the receiver is on standby you can switch it on by pressing the On Standby button on the remote control TV set On initial installation of the TV the AutoInstall installation wizard starts automatically The installation wizard allows you to make the most important settings for your digital receiver in the simplest way possible Each step of the installation explains which settings can be made gt In the installation wizard start window you can cancel the initial installation by pressing the red function button The receiver then begins to run default pre programming G Inthe ensuing installation steps you can press the OK key to accept the preselected settings and move on to the next step of the installation i By pressing the Back key you can go back to the previous installation step so you can correct any wrong entries
24. ght 6 4 1 Arrow selection method gt If E is shown on the left and amp on the right next to the set value you can alter this using the left right arrow keys 6 4 2 Selection list If amp is shown on the right next to the set va ain menu gt Settings Special functic lue the value is changed using the selection list DVR gt Press the OK button to open the selection list gt Highlight the setting you want using the up down arrow keys G By pressing the up down arrow keys it is possible to move the highlight upwards downwards from line to line and sideways using the right left arrow keys buttons 19 6 4 3 Entering numbers gt a gt Confirm by pressing the OK button The selection list is closed again and the selected setting is shown in the menu Enter the new setting you want using the numeric keypad key if a question mark 22 Or a number value 12109 or o is shown inside the highlight Note the number of digits used in the entry as there must always be the same number used This means that if a five digit value is required for example 10600 but you only wish to set a four digit value for example 9750 then you must enter a 0 at the beginning for every unused location Therefore in this example it would be necessary to enter 09750 6 4 4 Virtual keyboard If E is shown on the right next to the set value the value is amended using the virtual keyboard You h
25. hat the selected programme starts either earlier or later than stated If so either the beginning or the end of the programme being recorded is missing To avoid this problem you can enter a timer pre roll time post roll in one minute increments The timer will now start earlier and finish later than in the EPG data by the pre roll time post roll times entered gt To access the timer overview first call up the Main menu by pressing the Menu key gt Use the up down arrow keys to highlight the Timer Organiser item and confirm with OK gt Use the up down arrow keys to highlight the Timer Settings item and confirm by pressing OK again The Timer Settings submenu appears r organiser b Timer settings 7 15 Selecting a function gt Press the blue function key to open the navigation menu NAV Menu _NAV Menu au gt Use the up down arrow buttons to highlight the function you want to access TV TV mode playing TV programmes Radio Radio mode playing radio programmes Film DVR _ Film DVR Navigator access MPEG2 titles VOB TS or TS4 files stored on a device connected to the USB port Music Music navigator access MP3 titles stored on a connected USB device or a shared network drive Pictures Pictures navigator access JPG files stored on a connected USB device or a shared network drive gt Confirm with OK to select the highlighted function 33 8 Operating the DVR Your receiver has a DVR function
26. he programme with a time delay to the live broadcas y tching th th a time delay to the live broadcast Timeshift while the programme continues to be recorded in the background 8 2 2 Timeshift recording gt If you are watching a programme and are interrupted by e g a telephone call you can press the Play Pause button to pause the programme and start recording it at the same time gt To continue playing back the programme from this point press the Play Pause button again 8 2 3 Ending manual recording gt To finish recording first press the Stop button 35 The following request appears gt Use the up down arrow keys to select Store to save the recording to the storage medium or Discard to not save the recording and confirm with OK 8 2 4 Ending recording automatically Option 1 gt Press the On Standby button A request is now displayed asking what should happen to the recording in progress gt Use the up down arrow keys to highlight the item with the action you want gt Confirm by pressing OK The receiver will record the channel until the specified time and then switch to standby gt If the receiver is switched on before the end of the recording a request appears asking whether you want to start watching the recording in progress continue watching it live or finish recording gt Use the up down arrow keys to highlight the option you want and confirm with OK By selecting Start
27. he programmes currently being broadcast the programmes for that day or those for subsequent days 7 13 1 Calling up the Electronic Programme Guide gt Press the SFI button to call up the electronic programme guide G The electronic programme guide appears in the preset start category The Overview start category is selected in the factory settings 29 7 13 2 EPG overview 1 Display time gt gives the time of the programme to be displayed Now Next More Display day gt graphic representation of the weekday on the display Channel name with the corresponding channel within the active favourites list Progress bars or the start stop time of the programme being shown The current date and the time Shows that there is further information available about the broadcast Programmes on the channel being shown vo a fF WN By pressing the up down arrow keys you can scroll through line by line and with the right left arrow keys you can move the cursor sideways You now have access to the EPG functions Press the yellow function key to go to the Next or More EPG table gt You can exit the electronic programme guide again by pressing the SFI button 7 13 3 EPG timer programming The EPG electronic programme guide enables you to programme timer events with great ease G Check the EPG timer programming for the set timer pre roll time post roll times 7 13 3 1 DVR timer gt Press the Record button once to program
28. hed off Switch on standby clock 41 Receiver cannot be Defective data stream gt Hold down the On Stand by operated switched on or receiver blocked button on the receiver or switched off on the remote control for approx 5 seconds Disconnect mains plug for approx 5 seconds then reconnect receiver Perform Flash Reset Warning All personal settings will be lost gt Remove DC plug from receiver Press and hold the Standby and up arrow key at the same time Reinsert DC plug in the DC socket while holding down the Standby and up arrow buttons Keep both buttons pressed down for approx 5 sec then release SEt appears in the display USB device not recognised USB device formatted for Format USB device for wrong file system FAT32 file format 42 TechniSat Warranty How to get your three year warranty Step by step E C4 1 Register your products within four weeks of purchase either by sending in your completed registration card see reverse or online at www technisat com 2 1f contrary to expectations your equipment should develop a problem in the first instance please contact your dealer or our technical hotline on 49 0 3925 9220 1806 normal charges will apply for overseas calls If the problem cannot be resolved by calling our hotline please complete the Service Report in full see reverse and briefly describe the fault with your device
29. ion key EPG menu to open a selection window Use the up down arrow buttons to highlight the Search item The EPG Search menu is opened by pressing the OK button If no search term is stored in the search selection the virtual keyboard is displayed immediately after the menu is called up Title of current programme If one or more search terms are stored the menu automatically appears with the search selection included In this case select the New Search entry gt You can now manually enter the full title or part of the title of a programme as a search term 31 New search Existing search term EPG Menu gt Now press the green function key Accept to search for programmes with exactly this title the EPG data is searched for programmes with this title and these are displayed where available 7 14 Timer recordings You can use the DVR timer to record programmes to an attached recording medium while you are out Your receiver is equipped with video recorder timers and channel switching timers In terms of their programming these timer types differ only in name You can programme the timers manually as described in this chapter or use the EPG function 1 DVR timer This function is used to switch your digital receiver on and off for the selected programme to record it to the storage medium while you are out If the receiver is switched on by the DVR timer this is indicated by rEc in the display Some
30. l the title of the current programme and the currently active channel list G The progress bars are coloured yellow according to the amount of transmission time already expired for the current programme If the beginning of the progress bar is coloured red the transmission started too early if the end of the progress bar is coloured red the current programme has post roll time Additional programme properties are also displayed For example mT for teletext 69 for 16 9 broadcasts for encrypted channels O00 for Dolby Digital broadcasts E for subtitles for mono broadcasts Also where available from the provider the EPG genre and the FSK Voluntary Internal Film Industry Monitoring age restriction will be shown 25 7 5 Receiving encrypted channels Your receiver is equipped with an integrated CONAX encryption system smartcard reader and a Common Interface for accepting a Cl Cl module This enables you to receive and view encrypted channels To do this you must first either insert a CONAX Smartcard into the integrated card reader or insert a Cl Cl module with a valid Smartcard into the slots provided gt Insert the CONAX smartcard into the card slot in the integrated card reader gold coloured chip facing down and in the direction of insertion or gt Insert a Cl Cl module into the slot gt Insert the smartcard into the Cl Cl module card slot Ensure that the gold coloured chip on the smartc
31. me a DVR timer for a highlighted programme gt Press the Record button again to delete the timer 7 13 3 2 Channel switching timer VCR timer and alarm gt Press the Option button once to programme a channel switching timer for a highlighted programme gt Press the Option button again to change the timer type to an alarm gt Press the Option button again to change the timer type to a VCR timer 30 7 13 3 3 Timer menu Press the red function key Timer to open a selection window Use the up down arrow keys to highlight the Timer type option Confirm with OK For control purposes a mask appears for editing timers containing data for the selected programme You can make any necessary changes in this Then use the arrow buttons to select the Accept field and confirm with OK to save the timer Your receiver is now set to start the selected programme according to the type of timer If the device is switched on by the DVR timer this will be indicated by the message rEc in the display In standby mode the active timer is indicated by a clock icon next to the time 7 13 4 EPG search If you want to obtain information relating to a specific programme you can search for it automatically To do so you just need to enter the title or part of the title of the programme The EPG will then scan the data to look for the programme gt gt gt gt Open the EPG by pressing the SFI button Press the blue funct
32. nging the battery gt Open the cover on the battery compartment at the rear of the remote control by pushing it in the direction of the arrow and then lifting it off gt Insert the supplied batteries ensuring that the poles are the right way around indicator visible in battery compartment gt Close the battery compartment again 3 2 Remote control code By switching over the remote control option it is possible to use this remote control to operate a TechniSat television and two TechniSat receivers using the same coding gt To switch over the remote control option press the button you want SAT1 SAT2 or TV and OK at the same time 4 Connecting the DVB receiver Mains connection Connecting the LNB to the LNB input on the DVB receiver HDMI connection from the DVB receiver to the TV Scart connection between the DVB receiver and the TV ooo 3 Connecting the audio outputs to a hi fi system VA Li WY The following references a b c etc relate to the illustration on the previous page 4 1 Mains power connection The digital receiver should only be connected to the power supply once you have finished making all the connections to the various other components This will prevent damage to the digital receiver or other components a Once you have made all the other connections in accordance with the following sections use the power supply to connect the receiver to a 230 V 50 60 Hz mains power outl
33. o highlight the individual menu items in the same way as you highlight an item on a submenu to open it and alter the respective settings The menu items in some menus have to be highlighted by moving sideways This is done by pressing the right left arrow keys In some menus you can move the highlight upwards downwards from line to line using the up down arrow keys and sideways by using the right left arrow keys You will see the so called menu path in the uppermost line of the menu screen This shows you the menu you are currently in and the path you took to reach it In the example shown this is Main menu gt Settings gt Picture settings The menu path is also shown throughout the instruction manual and shows you how you can reach the respective menu with the settings described If the blue function key Help is displayed in the bottom line on the screen a help page can be displayed by pressing this button and hidden by pressing it again 6 3 Accepting settings Exiting menus and functions In some menus and functions the changes made must be accepted manually in order to save them permanently If this does not happen the function or the values that existed before the change was made will be reset automatically on exiting the menu a If an Accept field or the green function key with Accept is displayed in the bottom line of the screen you can see that the changes made must be saved manually to be accepted By highlighting Accept u
34. ode Select stations by switching sound sub carriers Red Rewind Green Stop DVR Navigator Yellow Pause playback Blue Fast forward Zoom format gt Right arrow key Channel list On Off Info Back Volume SS Volume Menu on off Language selection PIP picture in picture Sleep timer Remote control option operated using this remote control at the same time Note code must match by switching on the remote control option two receivers and one TechniSat TV with the same coding can be gt To switch over the remote control option press the button you want SAT1 SAT2 or TV and OK to use this receiver the remote control option selected here for the remote control and the remote control 2 Please read this first Before connecting and using the device first check that everything has been supplied and familiarise yourself with the safety instructions You should have received 1 Digital receiver 1 Power supply 1 Remote control 1 Quick start manual 2 Batteries 1 5V micro cell 1 HDMI cable 2 1 Safety advice For your own protection you should read the safety precautions carefully before using your new receiver The manufacturer accepts no liability for damage caused by inappropriate handling or by non compliance with the safety precautions Function related discharge current may occur with el
35. of the remote control functions e g calling up the main menu are unavailable 2 Video recorder timer If the video recorder timer is selected your digital receiver will be switched on and off for the selected programme allowing you to record programmes to an external recording unit while you are out e g a video recorder If the device is switched on by the video recorder timer this will be indicated by the message rEc in the display Certain remote control functions will be unavailable Please note that the corresponding recorder must also be programmed 3 Channel switching timer If your receiver is in normal operating mode it will switch to the programmed channel at the set time In contrast to using the DVR or video recorder timer option the device remains fully functional and will not be switched off at the end of the programme 4 Alarm If your receiver is in standby mode it is switched on when the programmed channel is reached at the set time In contrast to using the DVR or video recorder timer option the device remains fully functional and will not be switched off at the end of the programme 7 14 1 Timer settings pre roll time post roll time With EPG timer programming the receiver receives the data for the selected programme automatically via the EPG data This means that the start and end times for the programme to be recorded are transferred to the exact minute 32 However it is often the case t
36. of your reception equipment does not conform to the default setting press the yellow function key Modify gt Now create the antenna settings according to your reception equipment then press the red function key Back to return to the antenna configuration overview gt Press the green function key Accept to confirm the settings and move on to the channel search Channel search You can run a channel search to update the channel list gt Use the up down arrow keys to highlight the All channels field if you wish to scan for free to air as well as encrypted channels or All unencrypted channels if you only want to search for free to air channels 13 v amp e By pressing green function key Start an automatic channel scan is run In doing so all selected satellites in the antenna configuration are automatically scanned for channels This procedure may take several minutes Please note all messages displayed on screen If the channel search has been skipped the default channel list is loaded If either Belgium Netherlands or Luxembourg has been selected in the country selection a Fastscan is run according to the programme provider s specifications instead of the channel search described above Software updates The digital receiver will now check whether a new version of the software is available for the receiver If a new software version is available you can carry out an automatic software update If y
37. on card your two year legal warranty claim is converted into a three year warranty This releases you from your legal obligation to prove that the item was faulty for a period of three years from the purchase of your equipment based on the billing date In the event of a claim under warranty you will receive at TechniSat s discretion a free repair of your equipment or an as new equivalent replacement device To be sure of enjoying your warranty in full make absolutely sure that only original TechniSat accessories such as cables plugs etc are used during installation Invalidation of the warranty claim All warranty claims are invalidated if the equipment interior is accessed by anyone other than TechniSat or if the equipment is modified e g by hardware or software modifications Service under warranty shall also not apply in the event of damage caused by incorrect installation or improper use or in the event that manufacturer s numbers have been changed or rendered illegible or mechanical damage has been caused by accident or impact The guarantee does not cover compensation or expenses specifically not loss of data e g channel lists that have been set up or recordings on hard disks What to do in the event of damage If you encounter a problem with your TechniSat equipment despite the ultra modern manufacturing and constant quality checking we would ask you to first contact your dealer or our technical hotline on 49 0 3925 9220
38. or 8 4 1 2 From playback of a running existing DVR recording gt While a recording is in progress press the OK button first to open the DVR Navigator or 37 gt In the function selection select the Films DVR item gt Now call up the My Recordings folder on your attached recording medium 8 4 2 Pause Freeze frame gt To pause playback of a recording freeze frame press the Pause Play button during playback gt Press the Pause Play button again to resume playback from the same location 8 4 3 Fast forward rewind Your DVR has fast forward and rewind functions so you can get to a specific place in a recording gt Press the Fast forward or Rewind button during playback The message Fast forward gt or Rewind lt 44 appears The recording will now play in the specified direction at 4x speed gt If you press the Fast forward or Rewind button again the speed will increase to 16x The message Fast forward gt gt or Rewind 4 lt 4 lt appears gt If you press the Fast forward or Rewind button again the speed will increase to 64x The message Fast forward gt gt gt gt or Rewind 44 lt 4 lt appears gt By pressing the Fast forward or Rewind button again you can jump forwards or backwards in 10 minute increments gt When you get to the place you want in the recording you can return to normal playing mode by pressing the Play Pause button 8 4 4 Jog shuttle function To quickly an
39. ou do not want to wait for a search for new software or a software download you can skip this step by pressing the yellow function key If the search for new software or updates is skipped your device will run another test at the time set in the Software update menu and automatically download the software as long as this setting is left active and the device is in standby mode at that time If there is no new TV software available you can press the OK button to go to the next step in the installation wizard If on the other hand new TV software is found the automatic software update can be started by pressing the OK button 14 G The message Updating software Please wait is displayed on the screen along with a progress bar showing the progress of the download Two additional progress bars then appear showing the progress of the individual updating steps on your device Autolnstall will then resume Loading EPG data Your digital receiver has an EPG Electronic Program Guide You must first get the receiver to download the EPG data from the satellite to enable electronic programme guide data to be displayed For this reason the receiver will automatically start downloading the EPG data after the channel list update or channel search is completed This process can take up to 30 minutes gt If you do not wish to wait for the EPG data to be downloaded you can skip this procedure To do this press the yellow function
40. ppropriate postage Nordstrasse 4a affixed and send to the following address D 39418 Stassfurt see right Germany 2 Online registration Just complete the guarantee form you will find online at the TechniSat website Sj www technisat com and your product will pa be registered with TechniSat Service Report Service Report in the event of a claim under warranty If contrary to expectations you encounter a problem with your equipment despite the ultra modern manufacturing and constant quality checking we would ask you to first contact our technical hotline on 49 0 3925 9220 1806 normal charges will apply for overseas calls If we cannot solve the problem in this manner we would ask you to contact your dealer or supplier If you do so please complete the following Service Report beforehand Service Report Serial No Note ERRA The serial and item numbers are Item located on the back of the box or number ectly on the equipment Description of fault Please briefly explain the problem with your equipment PL please cut here registration card TechniSat registration card 3 year warranty By submitting a fully completed and signed TechniSat registration card your two year legal warranty claim is converted into a three yea
41. r warranty Hence you are released from your legal obligation to prove that the item was faulty for a period of three years from the purchase of your equipment based on the billing date In the event of a claim under warranty you will receive at TechniSat s discretion a free repair to your equipment or an as new equivalent replacement device Surname First name Street l Post City code ff ip town Telephone gor any questions optional pesii beoi SEA so SF Email optional TechniSat Dealer No to be completed by the dealer where registration is carried out in the dealership Date of purchase This field must be completed so that service under warranty can be provided Serial No Pe eee ME 2 Ses E Purchased at i sa 68 Sf i tt pt t tt tt Important Tick to re Surname Yes want to convert my two year legal warranty claim into a three year warranty claim and thereby st name consent to the use of my address by TechniSat for the purposes of sending information via post Street J Post City Yes want to receive communications via email as well optional code I 1 J town Telephone J z optional Date Signature TEEN ote Please note that a repair under warranty can only be carried out quickly and smoothly if this Service Report
42. rmat OK selected No sound or wrong audio Dolby Digital active or Check setting in menu playing wrong audio language selected Check Dolby Digital language selection 40 Cannot receive channels that were previously being received Intermittent appearance of square blocks in the picture Switches to freeze frame intermittently no sound Screen black at certain times with the message no signal No picture no sound display on Antenna defective or not Check antenna correctly adjusted Channel transferred to a Perform a search scan different transponder Channel no longer being None broadcast Heavy rain or snow Remove snow from dish antenna Antenna incorrectly Adjust antenna adjusted Dish too small for your Use larger antenna location Mount dish with clear line of sight Obstacle between dish and satellite e g a tree Short circuit in LNB connection Switch off receiver resolve short circuit switch receiver back on Check all cable connections see section 4 Defective LNB Replace LNB Incorrect external unit Modify setting installed at receiver Faulty or missing cable connection Antenna incorrectly Adjust antenna adjusted Antenna cannot be rotated Motor not compatible with Use a suitable motor DiSEqC 1 2 Time not displayed while in standby mode Time not acquired Play a local TV channel for approx 30 sec Standby clock switc
43. se the up down arrow buttons to highlight the channel you wish to watch 24 gt Confirm by pressing OK 7 4 4 Calling up blocked channels If a programme is selected that is blocked by the parental control function the message Device PIN will be displayed on the screen gt Use the numeric keys to enter your PIN code The channel you want will be displayed or Switch to a channel that is not blocked gt if global parental control is enabled the device PIN code will be requested again when the blocked channel is switched on To make things easier for you you only need enter the PIN code once during each operating phase G When doing so pay careful attention to the information and settings for global and user dependent parental control TechniFamily 7 4 5 Return to last channel selected gt Press the Back button on the remote control to return to the last channel selected gt Press the button again to return to the channel you were previously watching 7 4 6 TV Radio switchover gt You can use the TV Radio button to switch between TV and radio mode G The device switches to the last radio station listened to 7 4 7 Infobox An Info box appears on the screen for a set period every time you change channels Audio stereo 16 10 to 17 00 Movies Drama 16 21 Panda Gorilla amp Co TWiist 2 1 Das Erste Txt 9 DOD 169 This Info box displays the location and name of the selected channe
44. sing the right left arrow keys and confirming with the OK button or by pressing on the green function key Accept the changes are saved and you return to the next menu level up Alternatively gt Press the Return button A request appears asking whether the changes you made should be applied Use the right left arrow keys to highlight Yes or No and confirm your selection by pressing the OK button Changes will now be saved or discarded according to your selection and you move back to the next menu level up 18 Alternatively gt Press the Menu button to leave the menu directly The settings that need to be saved manually will be reset in this case G Ifthe green function key with Accept is not displayed in the bottom line of the screen the changes are saved automatically on exiting the menu 6 4 Changing a setting You can create settings using the arrow selection method via the selection list by entering numbers and by using the virtual keyboard The receiver specifies the method that can be used to change a highlighted setting You can see this from the following displayed symbols Arrow selection method Section 6 4 1 Arrows are shown on the left or right edge of the highlight amp Selection list Section 6 4 2 The symbol is shown on the right edge of the highlight 22 Entering numbers Section 6 4 3 i Virtual keyboard Section 6 4 4 The symbol is shown on the right edge of the high li
45. t gt there are significant malfunctions gt there is severe external damage 2 2 Periods of non use During a storm or lengthy period of non use e g holiday the receiver should be disconnected from the mains and the antenna cable removed Before you disconnect the receiver from the mains you should first switch it to standby mode and wait until the time appears in the display or the red LED light is displayed 2 3 Important notes on operation Operation of the digital receiver is simplified through the use of so called On Screen Displays OSD This also means that the number of keys on the remote control unit is reduced All functions are displayed on screen and can be controlled by means of a few control buttons Functions that are logically related are combined into a MENU The selected function will be highlighted The red yellow blue and green function keys are indicated by coloured bars at the bottom of the screen In the various menus these coloured bars represent different functions which can be implemented by pressing the appropriately coloured keys multi function keys on the remote control The function keys are only active when a brief description is displayed in the appropriate field The button identifications and terms that appear in the OSD menu are shown in bold type in this operating manual Help where available press the blue function key in the menus to display help text press again to close the
46. the terms shown in the OSD as well as the buttons to be pressed are highlighted from the rest of the text by the display format used A Warning indicates an important note which you absolutely should observe in order to avoid problems with the device loss of data or unwanted operation G Tip indicates a note about the function described as well as other functions associated with it and any others to be observed with reference to the respective place in the instruction manual 6 1 Switching the receiver on off gt When the receiver is on standby you can switch it on by pressing the On Standby button on the remote control TV set gt When operating normally you can switch the receiver to standby mode by pressing the On Standby button When switching the receiver on and off note section 7 3 as well 6 2 Calling up the main menu and navigating through the menus functions The following example will illustrate how you reach the main menu and call up a submenu The objective of the example is to call up the Picture settings menu gt Press the Menu button The main menu appears on the screen Main menu 16 gt Select the Settings menu item by moving the highlight over this item using the arrow keys Main menu Press the OK button to open the Settings menu The Picture settings menu is opened by subsequently pressing the OK button 17 ings gt Picture settings You can als
47. und channels this is indicated in a message You can then set a different language or another audio channel as follows gt Press the Language selection button A list of the languages currently being broadcast is displayed on the screen Use the up down arrow buttons to highlight the language you want and confirm with OK You can now hear the programme in the selected language It is also possible to receive mono broadcasts with your digital receiver Using the right left arrow keys you can choose between mono channel 1 mono channel 2 and stereo when the sound selection has been called up and the desired language highlighted 7 8 Transponder information gt gt gt Use the OK button to call up the Navigator Use the arrow keys to highlight the channel for which data you want to display dat By pressing the yellow function button Status the data for the installed transponder is displayed 7 9 Freeze frame gt gt Press the Freeze frame key the current TV picture will be displayed as a still picture Press this key again to return to normal operation The sound will continue to be reproduced normally during freeze frame 7 10 Teletext 7 10 1 Using your TV s teletext decoder Where broadcast teletext is provided via your TV s Scartsocket 7 10 2 Using the internal teletext decoder As an alternative you can use the integrated TOP teletext decoder to displa
48. watching recording from beginning the recording continues in Timeshift mode Option 2 gt Press the Record button the following window appears 36 gt Use the up down arrow keys to highlight the line with the action you want e g 1 hour and confirm with OK The receiver will now record the programme s on the channel you have selected for the set period of time and then stop recording automatically 8 3 Timer recordings You can use the DVR timer to record programmes to an attached recording medium while you are out You can programme the timers manually or use the EPG function 8 4 DVR playback You can access DVR recordings via the DVR Navigator 8 4 1 Calling up the DVR Navigator Starting DVR playback You can access DVR recordings via the DVR Navigator There are various ways to call this up Depending on whether you are in TV or radio mode a list appears with all the TV or radio recordings available on the storage medium After calling up the Navigator playback of the highlighted recording starts straight away i The programme information can be displayed and hidden by repeatedly pressing the Info button gt You can start to play back a recording by highlighting it and confirming with OK 8 4 1 1 When in TV mode gt Press OK to open the programme list navigator gt Press the green function key to switch to DVR in the DVR Navigator or gt Just press the green function key to open the DVR Navigat
49. y the information With TOP teletext all text pages are separated into groups and blocks by subject making the teletext display clearer gt gt Switch on the channel from which you wish to view teletext data Switch the teletext on by pressing the Teletext button 27 gt Arbeitslosenzahlen gesunken Obama zum Kandidaten bestimmt 14 G7 Staaten kritisieren Russland 1 nderung zu Krankengeldanspruch 5 Schalke verpasst K nigsklasse 204 Tennis Roddick in Runde zwei 221 Jansen wechselt vom FCB zum HSV bin amp der UT Inhalt A Z 101 Programm 300 440 Tagesschau 112 Boulevard 500 Aus aller Welt HE Ratgeber 5 Sp to soo Wirtschaft as E t tagesscha Teletext group Teletext block Use the numeric keys to enter the teletext page you want Your entry will appear in the upper left corner of the screen After you have entered the teletext page you want your device will search for it As it is not possible to transfer every teletext page at the same time it may be a few seconds before your receiver finds the page and displays it on the screen With all teletext operators the home page is page 100 Use the red or green buttons to move forwards or backwards one page at a time Press the yellow function key to call up the teletext group indicated in the yellow field Press the blue function key to call up the teletext block indicated in the blue field
Download Pdf Manuals
Related Search