Energy Sistem 393350 computer TV tuner
Contents
1. Thank you for purchasing this Energy HD5 First of all welcome to the Energy HD DVB T receivers world The following sections provide an overview of your new device and its basics features Please read everything carefully before start using the product AN Caution A RISK OF ELECTRIC SHOCK DO NOT OPEN To ensure your safety and the safety of others please ensure that you read all the safety information before operating this product v ur o Keep this information in a safe place for future reference This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts Warning To reduce the risk of fire or electric shock do not expose your HD5 to rain or moisture gt Position the cables so that they cannot be walked on or pinched by items placed on or against them Do not remove the cover or back There are no user serviceable parts inside Refer servicing to qualified personnel Do not expose your TDT HD5 to water dripping or splashing No objects filled with liquids such as vases should be placed on the unit Keep the product away from direct sunlight and heat source such as radiators or stoves Do not place the product on unstable cart stand tripod bracket or table The unit may fall resulting in possible damage or injury Do not let the device drop or shock Only use the AC adapter included with pro2. provides options adjust the channel search Select an option and press OK to adjust that setting Press the EXIT button confirmar to exit the Menu 7 1 1 ANTENNA POWER Enable this option if your external antenna need power from the device 11 2 COUNTRY SETTING select the country of residence 71 3 AUTO SCAN Search and install all channels automatically This option overwrites all present channels Select Auto Scan and press OK to start channel search 2 Tocancel channel search press EXIT Auto channel scan takes some time but you can press EXIT at any time to stop the search 7 1 4 MANUAL SCAN Install new channels manually This option adds new channels changing the current channels list Select Manual Scan then press OK The channel search screen will appear Press the right left key to select the channel number and frequency Press up down buttons to move aorund the screen Ron Press OK to start searching channels If a channel is found it is saved and added to the channels list If channels can t be found then exit the menu 39 v ur o You can enable or disable this option for saving energy when 5 is in standby status If it set ON the RF loop through will be enabled This way antenna signal will be transmitted for RF IN to RF OUT If you don t need it you can disable this option and reduce power Edicion de canales de TV Edici n de canales de radi
3. button Antenna cable is not Connect the antenna Screen shows No Signal connected cable Incorrect setting Set up correct parameter v o Switch on the sound by pressing the MUTE key Try another audio track or incorrect connection Connect the HDMI cable with HDMI correctly the screen The program is a radio Press lt TV RADIO gt key program to shift into TV mode No or incorrect connection Connect the audio cable with audio cable correctly Only sound no image on The battery is exhausted Change new battery Remote control unit is not Adjust the way of holding not workable in the right opposite of the remote control unit and IR receiver or too farfromit near from the IR receiver The image stop suddenly The signal is too weak Strengthen the signal VHF 170 230 MHz Input Frequency UHF 470 860 MHz Tuner Remote control unit is RF Input Level 25 82 dBm IF Bandwidth 7 MHz amp 8 MHz QPSK IGQAM 640AM MPEG4 AVC H 264 HP L4 Decoder Format MPEG2 MP ML HL eo Output Format 576p 720p 1080 4 3 amp 16 9 Output Port HDMI Single SCART MPEG ayer 1 amp 2 Audio Output Digital audio S PDIF Power Max 6 W Standby lt 0 5 W USB 2 0 Plays video DivX Xvid h 264 AVI MPG MPEG MKV VOB TS connector audio MP3 WMA and photos JPEG BMP PNG TS Limited to MPEG 2 DVB T broadcasting channels Energy Sistem Soyntec S
4. recording as follows bellow You can read the files you had recorded by accessing to Menu gt USB gt Multimedia gt My Recorder Mi Grabador confirmar or by pressing directly the PVR LIST button from the remote control Note If you have more than one storage disks connected to your device do not forget to set the PVR target disk from Menu gt USB gt PVR configure before you start recording a program Different recording tasks can not be set at the same time While watching TV press REC button to start recording the channel Press STOP button to exit While recording you can press PAUSE key to start to start the timeshift feature to review the program while recording is in progress Then you can use REV or FWD key to select the recor ded segment you want to watch or review while the recording process continues its normal course Press EXIT to hide the timeshift bar Press INFO key to show detailed information and to show again the timeshift bar Press STOP key to finish the recording process You can also schedule a recording or tune into the channel selected when you set For recording viewing of a desired program perform the following steps Press MENU go to Time and select Adv Timer to enter the Schedule mode and open PVR booking menu Then press OK key to add or edit the current recording task and the red button to delete Press EPG to show the TV programs list Choose the program you want to reco
5. of the screen When you enter playback mode you can use command keys dedicated to it PLAY PAUSE STOP REV FWD PREV and NEXT USB gt Multimedia l cula Vista miniaturi 16 01 2013 12 49 IA P g 1 1 1 4 Franklyn_trailer_720x576 avi Pe USB USB1 1 E S Confirmar The menu provides options to configure record and timeshift options Remember that an exter nal device must be connected If One button recording is enabled HD5 starts recordring when you press the REC button on the remote control and the recording period is the time selected in Default recording period if One button recording is disabled HD5 will ask you about the recording period See 8 PVR to get more information Before remove your external device select this option Note We cannot guarantee compatibility operation and or bus power with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit With large amounts of data it may take longer for the system to read the contents of a USB device Some USB devices may not be properly recognized Even when they are in a supported format some files may not play or display depending on the content Select the storage device and partition where the recordings will be stored You can also format the device The system supports two recording modes for MPEG 2 DVB T broadcasting channels One button recording and Scheduled
6. password or the default password 0000 and press OK to confirm This option will delete all preset channels and settings Press OK to access to a calendar Click the buttons of up down change the month and press the right left to set the year Click EXIT to exit the menu MPress OK to access to a calculator Use the buttons of up down and right left or press the number on the remote control Use red button to equal From this option you can access to 3 games Backgammon Boxman y Enertris Use arrow keys and color buttons as indictated at the bottom of the screen View model hardware and software information To access the Menu press the MENU button and select USB using the right left Buses corse keys The menu provides options to playback Music Photo Video and Multimedia files The unit will support USB devices with e FAT32 and NTFS file system From the multimedia menu you can access information stored in an external device connected via USB When a USB devices is attached you can select from the Music Photo Movie or My Recorder options in this menu using the right left keys and OK to select If a USB device is not connected the warning message Device is not available will appear H Inside the device information remember choose Music Photo Movie or My Recorder correctly use the arrow keys to move and use the buttosns in the remote control as they are indicated at the bottom
7. rating with the receiver To prevent the risk of electric shock do not open the cover or the back of the receiver 5 1 CONNECTING HD5 TO A TV TV AEREAL as e o ADAPTER 1 0 CABLE JACK 3 5 L t R COAXIAL AMPLIFICADOR DIGITAL Note When connecting the receiver to other equipment e g TV VCR and amplifier make sure to refer to relevant user manual for instruction Also make sure you disconnect all the equipments from the mains supply before the connection After all connections have been made properly you are ready to use your HD5 Switch on TV and make sure the receiver is connected to the Main Power Press STANDBY button to switch the receiver on If you are using the receiver for the first time or restored to Factory Default the Main Menu will appear on your TV screen Select OSD Language and press RIGHT LEFT key to select a language Select Country and press RIGHT LEFT key to select your country of residence Select Channel Search and press RIGHT or OK key to begin Automatic channel search Once channel tuning is complete you are now ready to watch TV 7 BASIC OPERATION Press the MENU button to acces the menu It has seven categories 7 1 INSTALLATION Instalaci n To access the Menu press the MENU Energia antena T X 7 button and select Installation The Menu Ajustes de pa s 4 Espafia
8. set password Remember you must enable it in Others Parental Control Channel Lock Select a channel then press the yellow button A menu will appear You must choose if you want to delete this only channel or the all list Press OK to confirm Press FAVOURITE and a menu will appear with 8 icons corresponding to 8 favorite categories like music films sports or shopping Select a channel and add it to a favorite category by pressing OK During the broadcasting you can access to a favorite channel Press FAVOURITE on your remote By pressing it repeatedly you can switch between categories Press on Top blue button and select your preferred channel group in order to edit their channels When you are in the group you want press again the blue button to access to the channel list 2 mr o lt There are 10 groups Visible In this group you can find all the channels except channels that have been marked as skipped Invisible In this group you can find channels that have been skipped From this list you can disable the skip option pressing the blue button again The other 8 groups correspond to the eight categories of favorite channels This menu is similar than the 7 2 1 TV Channel Editor but some options are disabled The EPG is an on screen TV guide that shows scheduled programs To access to this guide you can also press the EPG button on the Remote Control You can use the up down key to selec
9. A is liable for any lack of conformity which exists at the time the goods were purchased during a period of 36 months Batteries are excluded from the 36 month warranty having a warranty period of 2 months This warranty covers any defects in workmanship or materials This warranty doesn t cover any failure of the product due to accidents misuse or alteration made by an unauthorized person The special 36 months warranty is valid for the European Union For other countries please refer to your specific legislation or your local distributor Visit the Support section at http support energysistem com http support soyntec com and select your product to view the FAQ Frequently Asked Questions user manuals drivers and updates available as the possibility to submit a query to the Technical Service or consult the warranty You can check the availability of the user manual in your language at http www energysistem com en en support manuals 2 ur o 2 Alternatively you may prefer to contact the distributor from which you purchased the product presenting the purchase receipt or invoice 2013 by Energy Sistem Soyntec S A All rights reserved All company brand and product names are trademarks or registered trademarks of their respective companies 4 12 03 2013 Energy Sistem Soyntec S A Pol Ind Finestrat C Calpe 03509 Finestrat Alicante Spain 902 388 388 902 19 034 A53107488 We declare un
10. an 4 3 Letterbox 16 9 4 3 LB LetterBox Tipically for wide screen content on convencional 4 3 TV with black bars above and below the picture 4 3 PS PanScan Tipically for wide screen content on convencional 4 3 TV with left and right 42 edges cropped 6 9 Tipically for wide screen 16 9 TV If the video does not appear correctly you need to change the settings This should match the most common setting for TVs in your country NTSC for NTSC system TV PAL for PAL system TV You must set the video output to either HDMI SCART CVBS o SCART RGB It depends on the output you have chosen and your TV You should match these for a good quality video signal If the video is not displayed correctly change the settings This option is to match the most common configuration for HDMI 4801 NTSC 480p NTSC 576i PAL 576p PAL 20p NTSC o PAL 0801 NTSC o PAL 1080 50 Hz Adjust OSD transparency l 8 It will be applied to all OSD menus The banner with the channel information is displayed when switching from one channel to another Adjust banner display time seconds from second to always v o 74 7 DIGITAL AUDIO OUTPUT Select digital audio output mode It depends on the output you have chosen and your TV You can select LPCM or RAW 1 5 LANGUAGE This menu provides options to configure the OSD language the subtitle and audio language Click the butt
11. der our own exclusive responsibility that the product Energy Sistem DVB T digital tuner HDTV Mini SCART Energy HD5 China Is in compliance with the essential norms and standards of the Directive 2004 108 EC of the European Parliament and of the Council of December lath 2004 This symbol on the product or the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste For more information please contact the local authority or dealer where you purchased the product
12. duct Using any other adapter will void your warranty We recommend you to unplug the power from the outlet when the unit is not in use The slots and openings on the set top box are for ventilation Do not cover or block them as it may cause overheating NEVER let children push anything into the holes or slots on the case gt SERVICING There are no user serviceable parts in this DVB T receiver 2 4 BATTERY DISPOS Please ensure batteries are disposed of safely Never dispose of batteries in a fire or with other household waste Check with your local authority for disposal regulations ALWAYS turn off your TDT HD5 before cleaning it Do not use liquid or aerosol cleaners Clean your TDT HD5 with a soft damp not wet cloth Don t place cups with water or other liquids on the top of the product Don t place objects on the top of the product 3 GENERAL VIEW DCINI2V Used to connect the 12V DC adapter 2 IR SENSOR Used to connect the remote sensor 3 USB Used to connect an external device play files or make broadcasting recordings as 2 mr o AUDIO OUT Auxiliary audio output HDMi OUT This output connects to a HDMI device up to 1080p COAXIAL This output connects to a coaxial socket on your surround sound system RF OUT This socket will bypass the RF signal to either your TV or another video system RF IN This socket connects to your external antenna SCART OUT This output connects to y
13. o EPG Ordenaci n autom tica Confirmar Press the OK button to access this menu The menu provides options to adjust the channel and program settings Here you can edit your program preferences like lock skip move or delete Press edit red button to access to a menu where you can rename move or skip a channel You can change the channels order too To change the channel name Select the preferred program then press the green button A move symbol will appear Press up down to move the program and Move to to select its final position Repeat the above steps to move more channels Sort your channels from four options Alphabetical transponder pay free and service ID order are available Select the program you would like to skip and press the blue button A skip symbol is displayed The program is marked as a skip Repeat the previous step to select more programs Now this channel will appear as a Invisible channel in the invisible channels group You can select between groups as it s explained after in Group menu You can lock selected programs for restriced view Select the preferred program then press the green button A lock shaped symbol is displayed The program is now marked as locked Repeat the previous step to select more programs and press the green button to disable the locked program To view the locked program you will be required to enter either the default password 0000 or your last
14. ons of up down to select an option and press the right left to adjust the settings Click EXIT to exit the menu 7 5 1 OSD LANGUAGE Select an OSD language 7 5 2 AUDIO LANGUAGE Select the preferred audio language for watching TV channels If the language is not available the default program language will be used 7 5 3 SUBTITLE LANGUAGE Select the preferred subtitle language Note Subtitles are available according to the broadcaster s schedule 7 6 OTHERS The menu provides options about configuration and entertainment Click the buttons of up down to select an option and press OK to enter Click EXIT to exit the menu You can restrict access to configuration menus and channels that are unsuitable for children To restrict lock menus and channels you will need to enter either the default password 0000 or your own password Remember that you can lock a channel see Channel menu You can also use the censorship lock from 5 to total block In this menu you can also set or change the password for locked programs Enter your old password or the default password 00007 You will then be asked to enter your new password To confirm re enter your new password Once it is confirmed press EXIT to exit the Menu Use this option tu update the Firmware of your HD5 from a USB device Refer to the section 10 of this manual 2 ur o Reset your HD5 to the Default Factory Settings Press OK to select enter your
15. our TV up to 576p STANDBY SUBTITLE p m TV RADIO PREV NEXT w AUSE STON REPEAT Y ENERGY SISTEM Note The TEXT SUBTITLES AUDIO availability depends on the broadcasting channels MUTE Mute or restore audio output INFO Displays additional channel information TTX Displays Teletext information SUBTITLE Selects subtitles language EXIT Exits the current menu or returns to the previous menu OK Confirms an entry or selection Displays the list of channels VOL VOL Navigates through the menus Increases or decreases volume TV RADIO Switches from TV function to Radio function and from Radio to TV RECALL Used to switch between the last two viewed channels GOTO Jumps to a desired playback time PREV Skips to the previous track during media playback and skips to the previous channel during DTV playback NEXT Skips to the next track during media playback and skips to the next channel during playing DTV playback REPEAT Selects repeat mode or turns it off STOP Stops media playback STANDBY Switch the device to on or standby mode EPG Electronic Program Guide Turns the program guide on AUDIO Selects an audio track or audio mode CH CH Navigates through the menus Selects the next or previous channel MENU Displays the main menu FAVOURITE Displays the favourites channels menu 0 9 Numeric Buttons Selects a channel or setting FWD Searches forwards during media pla
16. rd and click the yellow button Book to access to the event add window Establish the settings and press OK to confirm the scheduled recording and save the changes Then the system will show the list of scheduled events Then use OK button and the red button to add edit or delete In both cases direct scheduled recording it will be created a file with the name of the tuned channel time and starting date of the recording You can rename the file by clicking the green button To play recorded programs press LIST in the remote control and select the file with up down buttons then press OK to play it Note Recorded program files do not support changing values such as subtitles languages EPG etc You must have a USB data storage device connected The playback and recorded multimedia files should be supported with USB devices in FAT FAT32 and NTFS format 9 FIRMWARE UPDATE To update the firmware of your HD5 visit ourdownload section in our website www energysistem com You will find all the files and instructions needed to update successfully your device I0 TROUBLESHOOTING If you experience problems with this DVB T receiver or its installation in the first instance plea se read carefully the relevant sections of this User Manual and this Troubleshooting section Problem Possible cause What to do Power is not connected Connect the power adapter No picture Switch on the power by The power is not on pressing the STANDBY
17. t the preferred program and press the right button to access to channel events With arrows you can view days and programs To see more info press OK From the EPG you can book events yellow button as it is explained on 8 PVR Note The availability of EPG information depends on the broadcasting channel 1 2 4 LCN Press Right to select LCN ON or OFF If you select it ON channels will be order by their LON number LCN adjusts the number that identifies the channel used in some Europeans countries such as UK or France 7 3 TIME SETTINGS To access the menu press Menu then select Time This menu provides options to adjust the Zone hora 4 0 time settings Press up down to select an enaena ee option and press right left to adjust the Setting Auto time zone Select auto ON or manual OFF for time adjustements EM Volver Confirmar Sleep timer TV will switch off after the time you choose Adv timer to access to the Schedule list and open PVR booking menu Formato de TV ore The menu provides options to adjust video Salida de video and audo settings Press up down to select Resoluci n de TV an option and press right left adjust that Apagado automatico Salida de audio digital setting Press Exit to exit the menu CREM Volver Confirmar 141 TV FORMAT You must set the display format to either 4 3 PanSc
18. yback REV Searches backwards during media playback PLAY Starts or resumes media playback PAUSE Pauses media playback COLOUR BUTTONS Operate different function in TEXT screen LIST Show the recorded programs list REC Record the program manually T ze O Z Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment The following diagram shows the correct way to insert batteries Open the cover 2 Install batteries 3 Close the cover Keep batteries out of reach of children If someone swallows a coin cell or battery must receive immediate medical attention Do not attempt to reactivate the batteries using heat loading or by other means Never dispose of batteries in fire or disassemble or short circuit Replace batteries at least once a year to avoid spillage Replace both batteries at the same time and replace them with the same type When not using the remote control for a long time remove the batteries To use the remote control point it towards to the IR receiver The remote control has a range of 7 metres from the receiver at an angle of 60 degrees The remote control will not work if the way to the receiver is blocked Sunlight or other very strong light will decrease the sensitivity of the remote control 60 60 9 CONNECTIONS Caution Make sure to check the voltage specification of the wall outlet is the same
Download Pdf Manuals
Related Search